
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Follow us on Facebook www.ulefone.com uleFone FIRMOR 17窃 USER MANUAL 二 @巨妇 Instruction for Card Installation Nano-SIM+ Nano-SIM+ microSD card Network CDMA: 800/1900 (BCO/BC1) GSM: 1900/1800/850/900 (B2/3/5/8) WCDMA: 2100/1900/1700/850/900 (B1/2/4/5/6/8) LTE-FDD: 2100/1900/1800/1700/850/2600/900/700/750/700/800/850 /800/1900/850/700/700/1700 (B 1/2/3/4/5/7/8/12/13/17 /18/19/20/25/26 /28A/28B/66) LTE-TDD: 2015/2500/2600/1900/2300/2500 (B34/38/39/40/41) [EN] Noise-Ca~ LED Indicator Light Light Sensor/ Proximity Sensor Front camera Receiver Screen : 二~~~- uMagnet Magnetic Area Wireless Charge NFC Pressure Relief Hole Lanyard Hole 区l Power Adapter USB Cable Armor 17 Pro is included an internal battery, you can track your battery status with the icon showed on the top right of the screen 厂······+Charging Type I Li-Polymer Battery Charging Voltage Limit 4.4V Please note that in this model battery is not replaceble by a user. Warning ·Use only Ulefone-approved batteries specifically designed for your phone ·Incompatible batteries can cause serious injuries or damage to your phone ·Never place batteries or phones on or in heating devices, such as microwave oven or『adiator.Batte『iesmay explode when ove巾eated Language Enter the Settings app, scroll down to find the "Language and lnpu立 setting, and then select your language in the list. Dialing You can call from the Phone app, the Contacts app or other apps and widgets. Wherever you see a phone number, you can click止 to make a call. To make a call to one of your contacts: on ome screen or ,n the apps drawer 1.Touch" ~" h 2. Choose or search out a contact 3. Place a call to the contact. For latest calls, please go to the recents list "。“ ... " You can also input the phone number on the dial pad " ::: to make a call. Message To send a message 1. Press "G " on the home screen or app drawer 2. Press"曰"to write a new message. 3. Type contact name, phone number, or press"~ 七'toadd one or more contacts as message receivers 4. Type text message. 5. Press"~" to add pictures, videos, or audio files 6. Send message by pressing " >" Photography To take a photo: 1. Open camera " -o ". 2. Frame your picture 3. Touch the shutter" (;J" to take the picture •It's no,mal that some systematic texts a『enot t,anslated to you, language Safety Information Please read this safety information carefully so that you can 匹I~•eyour phone in complete safety .Children : Be very careful with children and your phone. A mobile phone contains a number of detachable parts Exercise great care when children are in close proximity to the phone. The phone contains small parts that could be swallowed or cause choking. If your phone is equipped with a camera or lighting device, do not use it too near children or animals. 2.Hearing : Prolonged listening at full power using a lightweight headset or headphones can damage your hearing. Reduce the volume to the lowest possible level when listening to music or conversations. Avoid high volumes over extended periods. 3.Driving : Exercise care when driving. Driving requires maximum attention at all times in order to minimise the risk of accidents Using a mobile phone can distract the user and result ,nan accident. You must fully comply with the local regulations and laws in force regarding the use of cell phones whilst driving You are not allowed to use the phone whilst driving. A hands- free kit should not be regarded as an alternative solution. Flying : Turn your phone off when flying. Remember to turn your phone off when you are in a plane as it may cause interference. 4.Hospitals : Turn your phone off near any medical devices. It is extremely dangerous to leave a phone switched on near medical devices as it may cause interference. You must observe any instructions or warnings in hospitals and treatment centres. Remember to turn your phone off ,n service stations. Do not use your device in a petrol station near fuel. It is dangerous to use your phone inside a professional garage 5.Electronic implants and pacemakers: Users who wear a pacemaker or who are fitted with an electronic implant must hold the phone on the opposite side to their implant as a precaution when making a call. If you notice that your phone is causing interference with a pacemaker, switch it off immediately and contact the manufacturer of the pacemaker for advice on what action to take. 6.Fire hazard : Do not leave your device near heat sources such as radiators or cookers. Do not leave your phone charging near flammable materials as there is a real risk or行re. 7.Contact with liquid : Do not expose the phone to liquid or touch it with wet hands : any damage caused by water may be irreparable 8.Use only ulefone-approved accessories. The use of unauthorised accessories may damage your phone or cause a safety risk. 9.Do not destroy the batteries and chargers. Never use a battery or charger that has been damaged, keep batteries away from magnetic ob丿ectsas the latter might cause a short- circuit between the positive and negative terminals of your batteries and permanently destroy the battery or phone. As a general rule, you should not expose the batteries to very high or low temperatures (below 0°C or above 45°(). Differences in temperature may reduce battery autonomy and service life 10.Shocks and impact: Handle and use your phone with the utmost care. Protect your phone: shocks and impact may damage it. Some parts of your phone are made from glass and might break if the phone is dropped or is subject to severe impact. Avoid dropping your phone. Do not touch the screen with sharp objects. 11.Electric shock: Do not try to dismantle your phone as FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device m…
Text truncated - open the document above for the full version.
Shenzhen Gotron Electronic CO.,LTD. Family models difference declaration Mobile Phone Model: GQ3100, Armor 17 Pro, Armor 17, Armor 17T, Armor 17E, Armor 17S, Armor 17 Plus Difference declaration: All models are the same circuit, RF module, only color and model name are different Regards, Signature tangyongbin / Manager Date/City: 2022-10-27/Shenzhen Phone: 86-0755-83892089 Fax: 86755-83584541 E-mail: [email protected]
Shenzhen Gotron Electronic CO.,LTD. Agent Authorization Letter (2022-10-27) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.li [email protected] to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, tangyongbin / Manager Date/City: 2022-10-27/ Shenzhen Phone: 86-0755-83892089 Fax: 86755-83584541 E-mail: [email protected]
Shenzhen Gotron Electronic CO.,LTD. Long Term Confidentiality Request Letter (2022-10-27) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: Mobile Phone Model No.: GQ3100, Armor 17 Pro, Armor 17, Armor 17T, Armor 17E, Armor 17S, Armor 17 Plus FCC ID: 2AOWK-3100 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Schematic Diagram Block Diagram Part List / BOM List / PCB Layout Operational Description Tune-up Procedure FCC Software Security Requirements for UNII devices Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, tangyongbin / Manager Date/City: 2022-10-27/Shenzhen Phone: 0755-83895989 Fax: 0755-83895909 E-mail: [email protected]
Shenzhen Gotron Electronic CO.,LTD. Short Term Confidentiality Request Letter (2022-11-03) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Product: Mobile Phone Model No.: GQ3100, Armor 17 Pro, Armor 17, Armor 17T, Armor 17E, Armor 17S, Armor 17 Plus FCC ID: 2AOWK-3100 To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, < Shenzhen Gotron Electronic CO.,LTD. >. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which < Shenzhen Gotron Electronic CO.,LTD. > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < Shenzhen Gotron Electronic CO.,LTD. > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, tangyongbin / Manager Date/City: 2022-11-03/Shenzhen Phone: 0755-83895989 Fax: 0755-83895909 E-mail: [email protected]
Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10
Label Location
Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14 Photo 15 Photo 16 Photo 17 Photo 18 GSM/WCDMA/LTE ANT WIFI/BT/GPS ANT Photo 19 Photo 20 WPT/NFC ANT Photo 21 Photo 22
OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page1 OTA TEST REPORT © Applicant Shenzhen General Test System Co., Ltd ProductRayZone1800 Issue DateSeptember 6,2022 Shenzhen Fu Bang Wireless Technology Co., Ltd.tested the above equipment in accordance with the requirements in ANTI/IEEE Std 149-2008.The test results show that the equipment tested is capable of demonstrating compliance with theRequirements as documented in this report. Prepared by: Lunkang Yan Approved by: Zhanghong Lai Shenzhen Fu Bang Wireless Technology Co., Ltd. Room 302, lianjian Industry Part, Huarong road, Longhua District, Shenzhen, P.R. China OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page2 1. Test Laboratory 1.1 Notes of the Test report This report shall not be reproduced in full or partial.Theresults documented in this report applyonly to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposesonly. This report is written to support regulatory compliance of applicable standards stated above. 1.2 Test facility GTS1800Microwave Anechoic Chamber :testing frequency ranges from 600MHz to 6GHz . 1.3 Testing Location Company: Shenzhen Fu Bang Wireless Technology Co., Ltd Address: Room 302, lianjian Industry Part, Huarong road, Longhua District, Shenzhen, P.R. China Contact: lunkang Yan Telephone: 13760182610 E-mail: [email protected] 1.4 Laboratory Environment Temperature Min.= 19°C, Max.=25°C Relative humidity Min.=40%,Max.=72% Shield effect 0.6-7GHz >100dB Ground resistance <0.5Ω OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page3 2. General Description of Equipment under Test 2.1 Applicant and Manufacturer information Applicant Name Shenzhen General Test System Co., Ltd Applicant address Building C-A7 Suite 805,2190 Liuxian Avenue,Nanshan District,Shenzhen,P.R. China Manufacturer Name Shenzhen General Test System Co., Ltd Manufacturer address Building C-A7 Suite 805,2190 Liuxian Avenue, Nanshan District, Shenzhen,P.R. China 2.2 General information EUT Description Product Name RayZone1800 Model GTS-ANT D-H HW Version RayZone1800 V1.0 SW Version MaxSign 100 Antenna Type PCB Antenna Antenna Manufacturer Shenzhen General Test System Co., Ltd Test Frequency 700MHz-5.8GHz 2.3 Applied Standards According to the specifications of the manufacturer,it must comply with the requirements of the following standards: Test Method:ANSI/IEEE Std 149-2008 3. Test Conditions 3.1 Test Configuration The method is used to measure the antenna 3D GAIN of EUT in OTA qualified anechoic chamber. Equipment Under Test(EUT) geometry centre vertical projection at the centre of platform, the distance from EUT to measurement antenna is 1m. 3.2Test Measurement Spherical coordinate system OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page4 Figure 1 Test coordinate system Note: Theta is from 0-180degree.Phi is from EUT and record the Date, the step of rotation is 15 degree. Test Setup 4. Test Results 4.1 Gain and Efficiency OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page5 Model Test State Frequency (MHz) Efficiency (%) Gain (dBi) Frequency (MHz) Efficiency (%) Gain (dBi) Note Free Space 700 15.1 -5.1 1900 25.9 -2.3 710 15.5 -4.9 1920 23.7 -2.5 720 16.5 -4.6 1940 23.9 -2.8 730 16.8 -4.4 1960 22.6 -3.1 740 17.2 -4.5 1980 22.8 -3.4 750 17.1 -4.6 2000 23.7 -3.4 760 17.3 -4.5 2020 22.3 -3.4 770 16.4 -4.6 2040 25.9 -3.4 780 16.1 -4.9 2060 25.1 -3.7 790 15.4 -5.2 2080 24.6 -3.0 800 14.4 -5.8 2100 24.7 -3.2 810 16.2 -5.2 2120 25.2 -3.1 820 17.5 -4.9 2140 25.3 -3.0 830 18.2 -4.6 2160 25.2 -3.3 840 18.8 -4.5 2180 24.1 -3.9 850 18.2 -4.6 2200 23.2 -3.4 860 17.7 -4.9 2500 22.6 -3.4 870 18.1 -4.7 2520 22.9 -3.6 880 18.8 -4.5 2540 23.4 -3.5 890 19.5 -3.8 2560 25.3 -3.8 900 20.7 -4.1 2580 26.5 -3.5 910 21.9 -3.9 2600 28.6 -3.6 920 20.0 -4.3 2620 25.7 -2.9 930 18.8 -4.6 2640 28.3 -2.3 940 17.3 -5.2 2660 26.8 -2.0 950 17.0 -5.4 2680 28.0 -1.6 960 16.5 -5.6 2700 24.9 -1.5 1700 27.9 -2.0 1720 30.5 -1.6 1740 34.1 -1.4 1760 37.9 -0.7 1780 38.8 -0.5 1800 38.3 -0.5 1820 36.5 -0.9 1840 33.9 -1.2 1860 30.9 -1.6 1880 27.8 -1.9 OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page6 Model Test State Frequency (MHz) Efficiency (%) Gain (dBi) Frequency (MHz) Efficiency (%) Gain (dBi) Note Free Space 1550 31.0 -1.0 5100 32.3 -1.9 1560 32.6 -0.7 5140 32.3 -2.0 1570 33.0 -0.5 5180 35.3 -1.8 1580 33.7 -0.4 5220 36.5 -1.3 1590 32.9 -0.8 5260 37.0 -1.0 1600 30.6 -1.1 5300 39.3 -0.5 5340 40.8 0.1 5380 41.2 0.1 5420 41.9 0.1 2400 38.6 -1.0 5460 41.4 -0.2 2410 39.0 -0.9 5500 42.4 -0.5 2420 40.3 -0.5 5540 41.4 -0.4 2430 41.6 -0.3 5580 43.1 -0.1 2440 42.1 -0.2 5620 42.1 0.1 2450 43.3 -0.3 5660 42.8 0.3 2460 42.7 -0.2 5700 40.9 0.3 2470 42.5 -0.2 5740 42.5 0.6 2480 42.6 0.1 5780 41.3 0.6 2490 42.5 -0.2 5820 41.8 0.5 2500 42.8 -0.3 5860 41.3 0.4 6000 41.0 0.2 Note: WIFI and BT share an antenna 5. Equipment List Type of Equipment Manufacture Model Number Network Analyzer Key sight E5071C Switch control System GTS RayZone1800 Software GTS MaxSign 100Patten Measurement software ANNEX A 3-D Patten Plots OTA Test Report S…
Text truncated - open the document above for the full version.
Page 1 of 27 Report No.: STR220818002009E ` FCC RADIO TEST REPORT FCC ID:2AOWK-3100 Product: Mobile Phone Trade Mark: ulefone Model Name: GQ3100 Family Model: Armor 17 Pro, Armor 17, Armor 17T, Armor 17E, Armor 17S, Armor 17 Plus Report No.: STR220818002009E Prepared for Shenzhen Gotron Electronic CO.,LTD. 7B01, Building A, Block 1, Anhongji Tianyao Plaza, Longhua District, Shenzhen City, Guangdong Province China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 27 Report No.: STR220818002009E ` TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen Gotron Electronic CO.,LTD. Address ................................. : 7B01, Building A, Block 1, Anhongji Tianyao Plaza, Longhua District, Shenzhen City, Guangdong Province China Manufacturer's Name .......... : Shenzhen Gotron Electronic CO.,LTD. Address ................................. : 7B01, Building A, Block 1, Anhongji Tianyao Plaza, Longhua District, Shenzhen City, Guangdong Province China Product description Product name............................ : Mobile Phone Model and/or type reference : GQ3100 Family Model: Armor 17 Pro, Armor 17, Armor 17T, Armor 17E, Armor 17S, Armor 17 Plus Standards ............................. : FCC Part15.225 Test procedure ............................... : ANSI C63.10-2013 This device described above has been tested by NTEK, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK, this document may be altered or revised by NTEK, personnel only, and shall be noted in the revision of the document. Test Sample Number................: T220818001R003 Date of Test ........................................... : Date (s) of performance of tests ............. : Aug 18. 2022 ~ Oct 18.2022 Date of Issue .......................................... : Oct 17.2022 Test Result.............................................. : Pass Testing Engineer : (Mary Hu) Authorized Signatory : (Alex Li) Page 3 of 27 Report No.: STR220818002009E ` Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 TEST FACILITY 5 1.2 MEASUREMENT UNCERTAINTY 5 2 . GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 DESCRIPTION OF TEST MODES 7 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF SUPPORT UNITS (CONDUCTED MODE) 9 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 3 . ANTENNA REQUIREMENT 11 3.1 STANDARD REQUIREMENT 11 3.2 EUT ANTENNA 11 4 . EMC EMISSION TEST 12 4.1 CONDUCTED EMISSION MEASUREMENT 12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 12 4.1.2 TEST CONFIGURATION 12 4.1.3 TEST PROCEDURE 12 4.1.4 TEST RESULT 13 4.2 RADIATED EMISSION MEASUREMENT 15 4.2.1 RADIATED EMISSION LIMITS 15 4.2.2 TEST PROCEDURE 16 4.2.3 DEVIATION FROM TEST STANDARD 16 4.2.4 TEST SETUP 17 4.2.5 TEST RESULTS (BELOW 30MHZ) 18 4.2.6 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 22 5 . BANDWIDTH TEST 24 5.1 TEST PROCEDURE 24 5.2 DEVIATION FROM STANDARD 24 5.3 TEST SETUP 24 5.4 TEST RESULTS 25 6. FREQUENCY TOLERANCE 26 Page 4 of 27 Report No.: STR220818002009E ` 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.225) Standard Section Test Item Judgment Remark 15.207 Conducted Emission Pass 15.205(a) 15.209 15.225(abcd) Radiated Spurious Emission Pass 15.225 15.215(c) 20dB Bandwidth Pass 15.225(e) Frequency Tolerance Pass 15.203 Antenna Requirement Pass NOTE: (1) ” N/A” denotes test is not applicable in this Test Report. Page 5 of 27 Report No.: STR220818002009E ` 1.1 TEST FACILITY All measurement facilities used to collect the measurement data are located at 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen 518126 P.R. China. The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 and CISPR Publication 22. Site Description CNAS-Lab. : The Certificate Registration Number is L5516. IC-Registration The Certificate Registration Number is 9270A. CAB identifier:CN0074 FCC- Accredited Test Firm Registration Number: 463705. Designation Number: CN1184 A2LA-Lab. The Certificate Registration Number is 4298.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Name of Firm : Shenzhen NTEK Testing Technology Co., Ltd. Site Location : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen 518126 P.R. China. 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U,where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2,providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 6 of 27 Report No.: STR220818002009E ` 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Mobile Phone Trade Mark ulefone Model Name GQ3100 Family Model N/A Model Difference N/A Product Description The EUT is a Mobile Phone Operation Frequency: 13.56MHz Modulation Type: ASK Number Of Channel 1CH. Antenna Designation: Induction coil Adapter Model: HJ-PD66W-US Input: 100-240V~50/60Hz 1.5A Output: 5.0V3.0A OR 9.0V3.0A OR 12.0V3.0A OR 15.0V3.0A OR 20.0V…
Text truncated - open the document above for the full version.
Radiated Measurement Photos Conducted Measurement Photos
1/F, Building E, Fenda Science Park Sanwei, · Shenzhen · China
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 13.56 MHz - 13.56 MHz | - |
Smart Phone
Equipment Class
DTS - Digital Transmission System
Smart Phone
Equipment Class
DTS - Digital Transmission System
AI Sports Walkie Talkie
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Wireless Remote Ring
Equipment Class
DXX - Part 15 Low Power Communication Device Transmittersmartphone
Equipment Class
DTS - Digital Transmission System