2AOZMYYK-Q16SBluetooth headset

 挂耳式蓝牙耳机 ⸺Product description⸺        ⸺Product description⸺ 尺寸：110x70mm 产品规格多功能键 安全预防 蓝牙版本：V5.4 通话时间：7-8小时 音乐播放：7-8小时 待机时间：90小时 通信距离：≥10m 耳机充电时间：约1.5小时 耳机电池容量：45mAh 充电仓电池容量：500mAh 频率范围：2.40ghz-2.48-ghz 暂停/播放：单击MFB键 上一曲：长按1秒L边MFB键 下一曲：长按1秒R边MFB键 音量加：双击L边MFB键 音量减：双击R边MFB键 接听电话：单击MFB键 挂断电话：单击MFB键 来电拒接：长按MFB键1秒 取消通话：单击MFB键 呼叫Siri：不播放歌状态下 三击左或右MFB键 取消Siri：单击左或者右边MFB键 Pause/Play: Click the MFB key Previous: Long press the L-side MFB key for 1 second Next: Long press the R-side MFB key for 1 second Volume plus: Double click the L-side MFB key Volume reduction: Double click the MFB key on the R side Answer the call: Click the MFB key Hang up: Click the MFB key Call rejection: Hold down the MFB key for 1 second Cancel a call: Click the MFB key Cancel Siri: Click the left or right MFB key Call Siri: Without playing a songHit the left or right MFB key three times 支持协议：A2DP1.3/HFP1.6 HSP1.2/AVRCP1.6/D11.3 Product specifications wireless version: V5.4 Talk time: 7-8 hours Music playing: 7-8 hours Standby time: 90 hours Communication distance:≥10m Charging time of headset: about 1.5hour Headset battery capacity: 45mAh Battery capacity of charging chamber: 500mAh Frequency range: 2.40ghz-2.48-ghz Support agreement:A2DP1.3/HFP1.6 HSP1.2/AVRCP1.6/D11.3 R边MFB键 multiple use key 开机关机 如何重置 如何配对 电脑/手提电脑配对的方法 如何给耳机充电 1.初次开始使用的情况下，当耳机从充电仓里取出 耳机就会自动开机。 放回充电仓耳机就会开始充电并自动关机。 2.当耳机不使用时，放回充电仓自动关机。 1.从充电仓拿出开机 2.耳机自动配对 3.打开手机/平板的设置---蓝牙---打开蓝牙---搜索--- YYK-Q16S---配对/连接--播放音乐。 在未连接状态下，双击+长按2秒,然后关机,重置完成。 给充电仓充电 产品包装内有 请使用手机适配器给充电仓充电，可以使用电脑Type-c线 或者其他Type-c接口的充电器进行充电。 打开电脑设置-设备-蓝牙和其他设备-开启蓝牙--添加蓝牙 或其他设备-搜索蓝牙设备YYK-Q16S-配对/连接-播放音乐。 注意：如果电脑没有蓝牙，请插入蓝牙适配器，下载蓝牙驱动 后再正常使用。 Power on/off How to reset How to pair Computer/laptop pairing method 1. When the headset is taken out of the charging cham ber for the first timeThe headset will turn on automati cally. Put the headset back in the charging chamber and it will start charging and automatically shut down. 2. When the headset is not in use, put it back into the charging chamber and turn it off automatically. 1. Take out the charging chamber to start the machine 2. Automatic headset pairing 3. Open the settings of mobile phone/tablet --- Bluetooth --- Open Bluetooth --- Search--- YYK-Q16S --- pairing/connecting --- playing music. In the disconnected state, double-click + hold down for 2 seconds and then power off. Reset is complete. 1.把耳机放入充电仓内，耳机就会自动关机然后开始充电， 充电仓显示屏中间数字和左右对应进度条亮起，说明充电 仓正在给耳机充电。 2.耳机充电时红灯常亮，充满蓝灯亮10秒钟后息灭。 高质量的耳机，为了延长使用寿命，请参考以下说明： 1.请本品远离高温、高湿、腐蚀环境。 2.请防止本品被撞击，跌落，弯曲，浸泡等。 3.请不要拆耳机或者充电座。 4.请不要让本品一直过度充电，这样降低本品的使用寿命。 5.如果它引任何不适感或者疼痛，请停止使用本品。 6.使用由受监管的制造商认证的DC 5V-1A适配器。 反复充电和放电耳机会导致电池性能随时间降低，这对所有可充电 电子产品来说都是正常的。 1.蓝牙耳机2个 2.充电座1个 3.Type-c充电线1条 4.说明书1本 Safety precautions How to charge the headset There are Please use the mobile phone adapter to charge the charging chamber. You can use the computer Type-c cableOr other chargers with Type-c interface. For high-quality earphones, please refer to the following instructions to prolong the service life: 1. Please keep away from high temperature, high humidity and corrosive environment. 2. Please prevent the product from being hit, dropped, bent, soaked, etc. 3. Please do not remove the headset or charging stand. 4. Please do not allow the product to be overcharged all the time, so as to reduce the service life of the product. 5. If it causes any discomfort or pain, please stop using this product. 6. Use a DC 5V-1A adapter certified by a regulated manufacturer. Repeated charging and discharging of the headset will cause the battery performance to decrease over time, which will affect all rechargeable Electronic products are normal. 1. Two Bluetooth headsets 2. One charging base 3. One Type-c charging line 4. 1 manual Charge the charging chamber 麦克风孔 L边MFB键 麦克风孔 R-side MFB key Microphone hole L-side MFB key pilot lamp 1. Put the headset into the charging compartment, the headset will automatically shut down and start charging. The number in the middle of the display and the corresponding progress bar on the left and right side of the display light up, indicating charging Cang is charging the earphones. 2. When the earphone is charging, the red light will be steady on, and the blue light will be off after 10 seconds. Open Computer Settings - Devices - Bluetooth and Other devices - Enable Bluetooth - Add Bluetooth Or other devices - Search for Bluetooth device YYK-Q16S- Pair/Connect - Play music. Note: If the computer does not have Bluetooth, please plug in the Bluetooth adapter and download the Bluetooth driver Then normal use. FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between…

Text truncated - open the document above for the full version.

Shenzhen KingAnDa Technology Development Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen KingAnDa Technology Development Co., Ltd. Address: East Block NO. 2, Shangxue Industrial Zone, Bantian Street, Longgang District, Shenzhen, China Product Name: Bluetooth headset FCC ID: 2AOZMYYK-Q16S Model(s): YYK-Q16S 2.911(d)(5)(i) Equipment Type We, [Shenzhen KingAnDa Technology Development Co., Ltd. ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Li Weilin Date: 2024-07-24 Title and Company name: Director NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen KingAnDa Technology Development Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen KingAnDa Technology Development Co., Ltd. Address: East Block NO. 2, Shangxue Industrial Zone, Bantian Street, Longgang District, Shenzhen, China Product Name: Bluetooth headset FCC ID: 2AOZMYYK-Q16S Model(s): YYK-Q16S 2.911(d)(5)(ii) Applicant filing We, [Shenzhen KingAnDa Technology Development Co., Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Li Weilin Date: 2024-07-24 Title and Company name: Director NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen KingAnDa Technology Development Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen KingAnDa Technology Development Co., Ltd. Address: East Block NO. 2, Shangxue Industrial Zone, Bantian Street, Longgang District, Shenzhen, China Product Name: Bluetooth headset FCC ID: 2AOZMYYK-Q16S Model(s): YYK-Q16S 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen KingAnDa Technology Development Co., Ltd. ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: Shenzhen KingAnDa Technology Development Co., Ltd. Address: East Block NO. 2, Shangxue Industrial Zone, Bantian Street, Longgang District, Shenzhen, China FRN: 0027206952 FCC Grantee Code: 2AOZM Contact Name: Li Weilin Telephone No: +86-15989444337 Email: [email protected] Signature: Signature: S俨沪� Shenzhen KingAnDa Technology Development Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Title: Manager Title: Manager Date: 2024-07-24 Date: 2024-07-24 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to-the-communications-supply-chain-through-the

Shenzhen KingAnDa Technology Development Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-07-24 Subject; Request for Long Term Confidentiality FCC ID: 2AOZMYYK-Q16S To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Li Weilin Title: Director

Letter of Authorization Company: Shenzhen KingAnDa Technology Development Co., Ltd. Address: East Block NO. 2, Shangxue Industrial Zone, Bantian Street, Longgang District, Shenzhen, China Product Name: Bluetooth headset Model Number: YYK-Q16S FCC Identifier: 2AOZMYYK-Q16S We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Li Weilin Date: 2024-07-24 Title: Director

Model: YYK-Q16S External

Label&Location

Model: YYK-Q16S Internal Model: YYK-Q16S Model: YYK-Q16S Model: YYK-Q16S

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 7 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RFExposureReport For ApplicantName:ShenzhenKingAnDaTechnologyDevelopmentCo.,Ltd. Address: EastBlockNO.2,ShangxueIndustrialZone,BantianStreet, LonggangDistrict,Shenzhen,China EUTName:Bluetoothheadset BrandName:YYK ModelNumber:YYK-Q16S SeriesModelNumber:N/A IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF240522R00402 TestStandards:47CFRPart2SubpartJSection2.1093 FCCID:2AOZMYYK-Q16S TestConclusion:Pass TestDate:2024-05-23to2024-06-22 DateofIssue:2024-06-22 PreparedBy: AceXie/ProjectEngineer Date:2024-06-22 ApprovedBy: Ryan.CJ/EMCManager Date:2024-06-22 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF240522R00402 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 7 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02024-06-22Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF240522R00402 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 7 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction.............................................................................................................................................................................................4 1.1IdentificationofTestingLaboratory..................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation......................................................................................................4 1.3LaboratoryCondition............................................................................................................................................................4 1.4Announcement........................................................................................................................................................................4 2.ProductInformation...............................................................................................................................................................................5 2.1ApplicationInformation........................................................................................................................................................5 2.2ManufacturerInformation.....................................................................................................................................................5 2.3FactoryInformation...............................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT)...................................................................................................5 3.TestRequirement..................................................................................................................................................................................6 3.1AssessmentResult................................................................................................................................................................6 TestReportNumber:BTF240522R00402 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 4 of 7 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China 1.Introduction 1.1IdentificationofTestingLaboratory CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark,Tantou Community,SonggangStreet,Bao'anDistrict,Shenzhen,China PhoneNumber:+86-0755-23146130 FaxNumber:+86-0755-23146130 1.2IdentificationoftheResponsibleTestingLocation TestLocation:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark,Tantou Community,SonggangStreet,Bao'anDistrict,Shenzhen,China Description: Allmeasurementfacilitiesusedtocollectthemeasurementdataarelocated atF101,201and301,Building1,Block2,TantouIndustrialPark,Tantou Community,SonggangStreet,Bao'anDistrict,Shenzhen,China FCCRegistrationNumber:518915 DesignationNumber:CN1330 1.3LaboratoryCondition AmbientTemperature:20°Cto25°C AmbientRelativeHumidity:45%to55% AmbientPressure:100kPato102kPa 1.4Announcement (1)Thetestreportreferencetothereporttemplateversionv0. (2)Thetestreportisinvalidifnotmarkedwiththesignaturesofthepersonsresponsibleforpreparing, reviewingandapprovingthetestreport. (3)Thetestreportisinvalidifthereisanyevidenceand/orfalsification. (4)ThisdocumentmaynotbealteredorrevisedinanywayunlessdonesobyBTFandallrevisionsareduly notedintherevisionssection. (5)Contentofthetestreport,inpartorinfull,cannotbeusedforpublicityand/orpromotionalpurposeswithout priorwrittenapprovalfromthelaboratory. (6)Thelaboratoryisonlyresponsibleforthedatareleasedbythelaboratory,exceptforthepartprovidedbythe applicant. TestReportNumber:BTF240522R00402 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaborat…

Text truncated - open the document above for the full version.

2.4GHz 3216 Chip Antenna: RANT3216F245X02 _ Application: WLAN,802.11b/g,Bluetooth,WLAN,etc... Features SMD,highreliability,ultraImpact,Omni-directional... PartnumberInformation RANT3216F245X02 (A)(B)(C)(D)(E)(F) ElectricalSpecification ThespecificationisdefinedonEVB. DimensionandTerminalConfiguration No.TerminalName 1Feeding/GNG 2GND/Feeding (A)ProductTypeChipAntenna (B)SizeCode 3.2x1.6mm( ± 0.2mm) (C)MaterialHighKmaterial (D)Frequency2.4~2.5GHz (E)FeedingmodePIFA&SingleFeeding (F)AntennatypeType=01 WorkingFrequencyRange2400~2500MHz Bandwidth120MHz(Min.) PeakGain1.15dBi(Typ.) Impedance50Ohm Returnloss10dB(Min) PolarizationLinear AzimuthBeamwidthOmni-directional OperationTemperature(°C)-40~85°C ResistancetoSolderingHeats 10sec.(@280°C) TerminationNi/Au(Leadless) Dimension(mm) L 3.20±0.20 W 1.60±0.20 T 0.45±0.20 咏成國際科技有限公司電話 :13530576606 RAINInternationalTechnologyCo.,Ltd. TEL:13530576606 2.4GHz 3216 Chip Antenna: RANT3216F245X02 _ 1 EvaluationBoardReference PCBDimensionAntennaLayoutReference Unit:mm ElectricalCharacteristics ReturnLoss&Radiation ReturnLoss Frequency(MHz) S11(dB) 2400-10.50 2450-30.62 2500-11.47 Radiation 2400MHz2450MHz2500MHz Efficiency82.52%85.26%83.01% PeakGain1.15dBi1.24dBi1.19dBi Directivity1.89dBi1.97dBi1.91dBi X Y Z 2400MHz 2450MHz 2500MHz 2.4GHz 3216 Chip Antenna: RANT3216F245X02 _ TapingSpecifications ReelandTapingSpecification ReelSpecification TYPESIZEABCD 32167”5K/Reel 9.0±0.5 60±213.5±0.5178±2 TappingSpecification PackagingTypeABWEFGHTψDP PaperType3216 1.90±0.203.50±0.208.0±0.201.75±0.103.5±0.054.0±0.102.0±0.050.75±0.10 1.50±0.10 4.0±0.1 2.4GHz 3216 Chip Antenna: RANT3216F245X02 Reliability Table _ TestItemProcedure Requirements CeramicType Remark (Reference) Electrical Characterization Fulfilltheelectrical specification UserSpec. Thermal Shock 1.Preconditioning: 50±10°C/1hr,thenkeepfor24±1hrsatroomtemp. 2.Initialmeasure:Spec:referInitialspec. 3.Rapidchangeoftemperaturetest: -30°Cto+85°C;100cycles; 15minutesatLowercategorytemperature; 15minutesatUppercategorytemperature. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 107 Temperature Cycling 1.Initialmeasure:Spec:referInitialspec. 2.100Cycles(-30°Cto+85°C),SoakMode=1(2Cycle/hours). 3.Measurementat24±2Hoursaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. JESD22 JA104 HighTemperature Exposure 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered;500hours@T=+85°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 LowTemperature Storage 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered:500hours@T=-30°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 Solderability (SMDBottomSide) Dippingmethod: a.Temperature:235±5°C b.Dippingtime:3±0.5s Thesoldershouldcover over95%ofthecritical areaofbottomside. IEC60384-21/22 4.10 SolderingHeat Resistance (RSH) Preheatingtemperature:150±10°C. Preheatingtime:1~2min. Soldertemperature:260±5°C. Dippingtime:5±0.5s NoVisibleDamage.IEC60384-21/22 4.10 Vibration5g'sfor20min.,12cycleseachof3orientations Note:Use8"X5"PCB.031"thick7securepointson,onelong sideand2securepointsatcornersofoppositesides.Parts mountedwithin2"fromanysecurepoint.Testfrom10-2000 Hz. NoVisibleDamage.MIL-STD-202 Method204 Mechanical Shock Threeshocksineachdirectionshallbeappliedalongthethree mutuallyperpendicularaxesofthetestspecimen(18shocks) Peakvalue:1,500g’s Duration:0.5ms Velocitychange:15.4ft/s Waveform:Half-sine NoVisibleDamage.MIL-STD-202 Method213 Humidity Bias 1.Humidity:85%R.H.,Temperature:85±2°C. 2.Time:500±24hours. 3.Measurementat24±2hrsaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 Method106 2.4GHz 3216 Chip Antenna: RANT3216F245X02 _ Board Flex (SMD) 1.Mountingmethod: IR-Reflow.PCBSize(L:100×W:40×T:1.6mm) 2.Applytheloadindirectionofthearrowuntilbendingreaches 2mm. NoVisibleDamage.AEC-Q200 005 AdhesionForceof1.8Kgfor60seconds.NoVisibleDamage Magnificationof20Xor greatermaybeemployed forinspectionofthe mechanicalintegrityofthe devicebodyterminalsand body/terminaljunction. AEC-Q200 006 Physical Dimension Anyapplicablemethodusingx10magnification,micrometers, calipers,gauges,contourprojectors,orothermeasuring equipment,capableofdeterminingtheactualspecimen dimensions. Inaccordancewith specification. JESD22 JB100 RevisionHistory RevisionDateContent 12019/03/01NewDatasheet 22021/02/22Add2Dradiationcharacteristic

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 93 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Shenzhen KingAnDa Technology Development Co., Ltd. Address: East Block NO. 2, Shangxue Industrial Zone, Bantian Street, Longgang District, Shenzhen, China EUT Name: Bluetooth headset Brand Name: YYK Model Number: YYK-Q16S Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF240522R00401 Test Standards: 47 CFR Part 15.247 Test Conclusion: Pass FCC ID: 2AOZMYYK-Q16S Test Date: 2024-05-23 to 2024-06-22 Date of Issue: 2024-06-22 Prepared By: Ace Xie / Project Engineer Date: 2024-06-22 Approved By: Ryan.CJ / EMC Manager Date: 2024-06-22 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF240522R00401 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 93 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2024-06-22 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF240522R00401 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 93 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ..........................................................................................................................................5 1.1 Identification of Testing Laboratory ...............................................................................................5 1.2 Identification of the Responsible Testing Location ......................................................................5 1.3 Announcement .................................................................................................................................5 2 PRODUCT INFORMATION ..........................................................................................................................6 2.1 Application Information ...................................................................................................................6 2.2 Manufacturer Information ................................................................................................................6 2.3 Factory Information .........................................................................................................................6 2.4 General Description of Equipment under Test (EUT) ...................................................................6 2.5 Technical Information ......................................................................................................................6 3 SUMMARY OF TEST RESULT S .................................................................................................................7 3.1 Test Standards ..................................................................................................................................7 3.2 Uncertainty of Test ...........................................................................................................................7 3.3 Summary of Test Result ..................................................................................................................7 4 TEST CONFIGURATION .............................................................................................................................8 4.1 Test Equipment List .........................................................................................................................8 4.2 Test Auxiliary Equipment ............................................................................................................. 10 4.3 Test Modes ..................................................................................................................................... 10 5 EVALUATION RESULTS (E VA L U AT I O N ) ................................................................................................. 11 5.1 Antenna requirement ..................................................................................................................... 11 5.1.1 Conclusion: ........................................................................................................................... 11 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) .............................................................................. 12 6.1 Conducted Emission at AC power line ....................................................................................... 12 6.1.1 E.U.T. Operation: ................................................................................................................. 12 6.1.2 Test Setup Diagram: ............................................................................................................ 12 6.1.3 Test Data: .............................…

Text truncated - open the document above for the full version.