2AP3Q-FG2317WBSmart Body Fat Scale

SMART B O D Y F A T SCALE User Manual Thank you for choosing Smart Sc ale! This scale is your personal health assistant. It uses bio-electrical impedance analysis (BIA) technology to offer you the data you need to kee p track of your personal health metrics: BMI(Body Mass Index), Bo dy Fat %, Body Water, Muscle Mass, Bone Mass, Protein, and much more! We sincerely hope that you enjoy using your new product. S m a r t Scale User Manual 1 CautionSafety precautions:When using digital scale, certain basic safety precautions must be followed, including the following:1. The Bluetooth scale should not be used to diagnose or treat any medical condition. You should consult a doctor when undertaking any diet or exercise program.2. lf you are pregnant or have a pacemaker or other internal device,you should not rely on the data provided by this product . All data is for reference and is not a substitute for advise f rom a licensed health care professional.3. lf the scale malfunctions, first check the batteries and rep lace if needed.4. Check the device before each use. Do not use the device if damaged. The continuous use of a damaged unit may cause injury or improper results. Note:1. Scale is a high-precision measuring device. Never jump or stamp on the scale or disassemble. Please handle the scale carefully to avoid breakage.2. Place the scale on a hard, flat surface during use. Using th e scale on a soft surface like carpet or linoleum may affect the accuracy of the scale readings.3. To ensure weighing accuracy, please gently step on the scale to wake it up and wait at least 10 seconds before weighing you rself on the scale. You must also wake up the scale if it has been mo ved. 2 Take your measurements at the same time each day to ensure the most accurate results. 4. When not in use, please remove the batteries and place the device in a dry room and protect it against extreme moisture, h eat, lint, dust and direct sunlight. Never place any heavy objects o n the equipment.5. Before using the scale, make sure you have entered all your personal data through the Fitdays app.6. Use the scale while barefoot. The scale cannot measure body fat percentage if you're wearing shoes or socks.7. Make sure your feet are dry before weighing yourself.8. This scale is not waterproof; never immerse the scale in wat er. To clean the surface, use a damp cloth or glass cleaner. Do not use soap or other chemicals. SpecificationsSize:10.2 x 10.2 x 0.94 inches / 26x26x2.4cm Weight: 1.26kg/2.77lbBatteries: 3 *1.5 V AAA Capacity: 396 Ib / 180 kgDivision: 50g/100g(>100kg)/0.1lbUnit: Ib / kg 3 For body weight: Place the scale on an even surface and wait at least 10seconds before stepping on the scale. The reading shoul d display 0.00 kg before stepping on. Accuracy RangeTrouble shooting Functioning normally Change battery Change battery Overload Calibrating 4 Display Sequence 5 Do not step off the scale when the screen is running, which ind icates that the device is measuring. Please wait until the measurement is complete. Then the screen will display results.Above test results, including body weight, body fat rate and BM I, which are shown for 3 seconds each data. For body fat and other body composition analysis: Stand straigh t on scale and uniformly touched the electrodes with bare and dry feet as shown below.The Bluetooth Scale can connect with your mobile phone (Android 6.0+ & IOS 8.0+) or iPad via Bluetooth 4.0. Download the ‘Fitdays’ app free from the App Store or Google Play. Operating instructions Conductive areas 6 Turn on Bluetooth on your smartphone. Location also needs to beturned on for Android 6.0 or higher. Download " Fitdays "via App Store orGoogle Play.Press [Device] and Device Management to enter measuring page and find device. Power on the scale,press[+] to select "MY_SCALE" to add the device. Come back to measure page. Step on the scale and keep standing for 5-10 seconds with bare feet. The weighing has finished after the analysing datas come out. Install the original battery set. Please note the batteries offered are trial version. We recommend replacing them within 3 months and removing the batteries when not using for a long time. Register your own ID, then add personal data and confirm OK. Download App and install the batteriesPairing the scale with your smartphone Pairing Your Device 7 MY _SCALE Click " Charts " to view your progress history. Enter “Click to view all data” into the calendar to check the historical data, and you c ould select a dataset or all data you want to delete. You can also s elect to for sharing to friend via facebook,instagram, or S MS by click button. View reports, deleted data, set reference data, share progress by recently,weekly,month and year. 8 At the bottom, you will find a bar where you can select differe nt types of data to display. You can share your fitness data with friends via Facebook, Instagram, or SMS by clicking the share button and Share on the Measuring page.Under " Account " you can add user(s) " " . To delete an account, swipe the account to the left and select " Delete " . Themes, Set goals, Weight units, Weighing done sounds, Languages, Passwords can all be set under the Setting " " page. Please note that you can change the weighing unit under Press the Unit button,then if will control the unit of App. Add/Delete Users & Basic Settings 9 Fitdays Fitdays Fitdays 1)Open the " Health " app on your iPhone, select 'Data Sources.2) Select " Fitdays " from the sources list.3)Turn on all categories to allow the Fitdays app to work.1) Enter Setting " " page, select " Google Fit "2) Turn on " Google Fit " button, login to your Google account.3)It will now automatically redirect you to the " Google Fit " page. 4) After the connection has been established, the data " Weight " will sync to Google Fit. Apple HealthGoogle Fit Sync to fitness app Fitdays 10 Fitbit App 1) Enter Setting " " page, select Fitbit2) Turn on Fitbit button, login to your Fitbit account.3) Sele…

Text truncated - open the document above for the full version.

Guangdong Welland Technology Co., Ltd. NO. 85 Minke East Road, Min Ying Science and Technology Park, Shiqi District , Zhongshan, Guangdong, China, 528400 Product Similarity Declaration Product name: Smart Body Fat Scale Model name: FG2317WB, FG2317WB-A, FG2313WB, FG2313WB-A FCC ID: 2AP3Q-FG2317WB We (Guangdong Welland Technology Co., Ltd. ) hereby state that all the models are electrical identical including the same software parameter and hardware design, same mechanical structure and design, the only difference is the model name. Signature: Contact person: Hillary Chan

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Guangdong Welland Technology Co., Ltd. Address: NO. 85 Minke East Road, Min Ying Science and Technology Park, Shiqi District , Zhongshan, Guangdong, China, 528400 Product Name: Smart Body Fat Scale Model Number: FG2317WB, FG2317WB-A, FG2313WB, FG2313WB-A FCC Identifier: 2AP3Q-FG2317WB We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Hillary Chan Date: 2024-03-26 Title: Manager Signature of applicant:

Report No.: AGC06164240304AP02 Page 1 of 3 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC06164240304AP02 Page 2 of 3 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC06164240304AP02 Page 3 of 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm*20mm FCC ID: 2AP3Q-FG2317WB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Report No.: AGC06164240304AP02 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC06164240304AP02 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC06164240304AP02 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report************************************* BT Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC06164240304FH01 FCC ID : 2AP3Q-FG2317WB APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Body Fat Scale BRAND NAME : N/A MODEL NAME : FG2317WB, FG2317WB-A, FG2313WB, FG2313WB-A APPLICANT : Guangdong Welland Technology Co., Ltd. DATE OF ISSUE : Mar. 25, 2024 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06164240304FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 25, 2024 Valid Initial Release Report No.: AGC06164240304FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC06164240304FH01 Page 4 of 10 1. General Information Applicant Guangdong Welland Technology Co., Ltd. Address NO. 85 Minke East Road, Min Ying Science and Technology Park, Shiqi District , Zhongshan, Guangdong, China, 528400 Manufacturer Guangdong Welland Technology Co., Ltd. Address NO. 85 Minke East Road, Min Ying Science and Technology Park, Shiqi District , Zhongshan, Guangdong, China, 528400 Factory Guangdong Welland Technology Co., Ltd. Address NO. 85 Minke East Road, Min Ying Science and Technology Park, Shiqi District , Zhongshan, Guangdong, China, 528400 Product Designation Smart Body Fat Scale Brand Name N/A Test Model FG2317WB Series Model(s) FG2317WB-A, FG2313WB, FG2313WB-A Difference Description All the same except for the model name. Date of receipt of test item Mar. 19, 2024 Date of Test Mar. 19, 2024 to Mar. 25, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Mar. 25, 2024 Reviewed By Calvin Liu (Reviewer) Mar. 25, 2024 Approved By Max Zhang (Authorized Officer) Mar. 25, 2024 Report No.: AGC06164240304FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V2.0 Software Version V1.0.0 Modulation Type BLE GFSK 1Mbps GFSK 2Mbps Maximum Transmitter Power -5.547dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 0.89dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC06164240304FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC06164240304FH0…

Text truncated - open the document above for the full version.

Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 Manufacturer：Shenzhen DBT Communications Equipment Co.,Ltd. Address：No. 505, Building 8, Nanshan Yungu Phase II, Taoyuan Street, Nanshan District, Shenzhen,Guangdong, china Client： Guangdong Welland Technology Co., Ltd. Project： FG2317WB Antenna standard： BT Shenzhen DBT Communications Equipment Co.,Ltd. Antenna Testing Report Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 OTA-800 Brand：ETS Frequency range：370MHz-8.5GHz Features：passive、active test；G net、C net、 2G/3G/4G，WIFI and BT， TRP、TIS test. 1. Test Equipment 5071C Brand：Agilent Frequency range：9KHz-8.5GHz Features：2G/3G/4G/BT/WIFI antenna comprehensive passive test。 8960 Brand：Agilent Frequency range：292MHz-2700GHz Features：2G/3G avtive test。 CMW500 Brand：Rohde & Schwarz Frequency range：70KHz-6GHz Features：2G/3G/4G/BT/WIFI/NB-Lot antenna comprehensive passive test。 Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 2. Matching circuit Antenna RF Module E1 E2 E3 E4 Element MAIN GPS/WIFI /BT AUX E1(0201) N/A E2(0201) 1.2pF E3(0201) 10pF E4(0201) 0Ω Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 3.Antenna assembly position Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 Electrical Parameter Frequency Range (MHz) 2400~2500 VSWR ≤7.0 Input Impedance(Ω) 50 Gain(dBi) 0.89 Polarization(°) vertical Max power(W) 10 Antenna Type PCB Antenna Working Temperature(°C) -40~+80 4.Electrical Parameter Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 5.Antenna Passive Data Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 6.Antenna Gain/Efficiency/3D Apple Chart Freq Effi Gain (MHz) (%) (dBi) 2400 1.6 0.89 2410 1.36 0.87 2420 1.77 0.86 2430 1.45 0.85 2440 1.42 0.79 2450 1.18 0.78 2460 1.63 0.77 2470 1.01 0.76 2480 1 0.69 2490 0.73 0.61 2500 1.42 0.67 Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 7.Antenna Direction Map 7.Antenna Direction Map

Page 1 of 49 FCC Test Report Report No.: AGC06164240304FR01 FCC ID : 2AP3Q-FG2317WB APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Body Fat Scale BRAND NAME : N/A MODEL NAME : FG2317WB, FG2317WB-A, FG2313WB, FG2313WB-A APPLICANT : Guangdong Welland Technology Co., Ltd. DATE OF ISSUE : Mar. 25, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06164240304FR01 Page 2 of 49 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 25, 2024 Valid Initial Release Report No.: AGC06164240304FR01 Page 3 of 49 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ..................................................................................................................... 6 2.2 Test Frequency List ..................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 7 2.4 Test Methodology......................................................................................................................................... 7 2.5 Special Accessories ..................................................................................................................................... 7 2.6 Equipment Modifications ............................................................................................................................. 7 2.7 Antenna Requirement .................................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory .................................................................................................................... 8 3.2 Test Facility .................................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................... 9 3.4 Measurement Uncertainty ........................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................... 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ..................................................................................................................................... 12 4.2 EUT Exercise ............................................................................................................................................. 12 4.3 Configuration of Tested System ................................................................................................................ 12 4.4 Equipment Used In Tested System ........................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................... 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable ................................................................................................................................. 16 7.2 Measurement Procedure ........................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 16 7.4 Measurement Result ................................................................................................................................. 16 8. 6dB Bandwidth Measurement ...................................................................................................................... 19 8.1 Provisions Applicable ................................................................................................................................. 19 8.2 Measurement Procedure ........................................................................................................................... 19 8.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 19 8.4 Measurement Results ................................................................................................................................ 20 9. Power Spectral Density Measurement ........................................................................................................ 24 9.1 Provisions Applicable .....................................…

Text truncated - open the document above for the full version.

Report No.: AGC06164240304AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC06164240304AP01 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************