2AP7LCHIPPY4G SMARTPHONE

1 ROVER CHIPPY Mobile Phone 2 Quick Start Guide 3 Dear Customer, Congratulations on becoming a proud owner of Rover product. Every Rover product goes through a rigorous process of sample evaluation and approval before commercial launch. We look forward to your patronage. It would be our pleasure to receive feedback and suggestions you may have for improvements in the product(s) you are using. SAFETY TIPS  Use of wireless hands-free system (headphone, headset) with a low power BT emitter.  Keep your calls short or send a text message (SMS) instead. This advice applies especially to children, adolescents and pregnant women.  Use cell phone when the signal quality is good.  People having active medical implants should preferably keep the cell phone at least 15 cm away from the implant. 4 Contents I. Warning ................................................................................................................................. 5 1 Safety information .................................................................................................................. 5 2 Cautions on mobile phone use ............................................................................................... 6 2.1 Interference ........................................................................................................................ 6 2.2 Reasonable use ................................................................................................................... 6 2.3 Qualified maintenance service ............................................................................................. 6 2.4 Water-resistance ................................................................................................................. 6 2.5 Emergency calls ................................................................................................................... 6 3 Precautions for use of battery ................................................................................................ 6 4 Cautions for children .............................................................................................................. 7 II. Appearance ........................................................................................................................... 7 III. Start to use ........................................................................................................................... 8 1 Insert SIM card ....................................................................................................................... 8 2 Insert Memory card ................................................................................................................ 8 3 Charge the battery ................................................................................................................. 8 IV. Basic functions ..................................................................................................................... 9 1 Lock and unlock the screen ..................................................................................................... 9 2 Make it yours ....................................................................................................................... 10 3 Make a call ........................................................................................................................... 13 4 Call log ................................................................................................................................. 14 5 Reject a call by SMS .............................................................................................................. 15 6 Add a contact ....................................................................................................................... 16 7 Send and Receive message(s) ............................................................................................... 17 8 Browser the Web ................................................................................................................. 17 5 9 Enjoy music .......................................................................................................................... 17 10 Download applications on Google Play ............................................................................... 18 11 Manage Applications .......................................................................................................... 18 12 Applications and Utility ....................................................................................................... 18 V. Technical Information ......................................................................................................... 19 I. Warning Please read the concise rules. The breach of the rules may result in danger or violation of law. 1 Safety information 1.1 Traffic safety first Please use the mobile phone carefully when you drive a car. Park your car at roadside and then use the mobile phone if the driving condition is bad. 1.2 Turn off in hospital Please abide by relevant provisions or regulations. Please turn off your mobile phone near medical equipment. 1.3 Turn off in airplane Wireless equipment has disturbance to the airplane, so the use of the mobile phone in airplane is dangerous and illegal. 6 1.4 Turn off when refueling Please don’t use the mobile phone in gas station or near fuels or chemicals. 1.5 Turn off near blasting sites Don’t use the mobile phone in blasting sites. Please observe relevant restrictions and carry out rules or regulations. 2 Cautions on mobile phone use 2.1 Interference All phones may be interfered, which affect phone calls. 2.2 Reasonable use Use only in the normal position. Do not touch the antenna area unnecessarily. 2.3 Qualified maintenance service Only qualified personnel may install or repair this product. 2.4 Water-resistance Your device is not water resistant. Keep it dry. 2.5 Emergency calls…

Text truncated - open the document above for the full version.

WHOOP INTERNATIONAL TRADING LIMITED 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: WHOOP INTERNATIONAL TRADING LIMITED Address: Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 4G SMARTPHONE FCC ID: 2AP7LCHIPPY Model(s): CHIPPY 2.911(d)(5)(i) Equipment Type We, [WHOOP INTERNATIONAL TRADING LIMITED] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Kang Ping Date: 2024.04.24 Title and Company name: President / WHOOP INTERNATIONAL TRADING LIMITED NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

WHOOP INTERNATIONAL TRADING LIMITED 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: WHOOP INTERNATIONAL TRADING LIMITED Address: Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 4G SMARTPHONE FCC ID: 2AP7LCHIPPY Model(s): CHIPPY 2.911(d)(5)(ii) Applicant filing We, [WHOOP INTERNATIONAL TRADING LIMITED] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Kang Ping Date: 2024.04.24 Title and Company name: President / WHOOP INTERNATIONAL TRADING LIMITED NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

AOGES CO., LIMITED 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: WHOOP INTERNATIONAL TRADING LIMITED Address: Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 4G SMARTPHONE FCC ID: 2AP7LCHIPPY Model(s): CHIPPY 2.911(d)(7) USA Designated Agent for Service of Process We, [WHOOP INTERNATIONAL TRADING LIMITED] (“the applicant”) designate [AOGES CO., LIMITED] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: AOGES CO., LIMITED USA Address: 1624 Market St, Ste 226, #30327 Denver CO, 80202 USA FRN Number: 0033947847 Contact Name: XIAOYAN LAl Telephone No: +1 303 623 1940 Email: [email protected] Applicant Company name: WHOOP INTERNATIONAL TRADING LIMITED Address: Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Grantee FRN Number: 0027622075 FCC Grantee Code: 2AP7L Contact Name: Kang Ping Telephone No: +86-13510361370 Email:mailto:[email protected] Signature: Title: President AOGES CO., LIMITED 2.911 (d)(7)USA Agent v1.5 Signature: Title: CEO Date: 2024.04.24 Date: 2024.04.24 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

WHOOP INTERNATIONAL TRADING LIMITED Agent Authorization Company: WHOOP INTERNATIONAL TRADING LIMITED Address: Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 4G SMARTPHONE Model Number(s): CHIPPY Product Description: 4G SMARTPHONE FCC ID: 2AP7LCHIPPY We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2024.04.24 Name: Kang Ping Title: Manager Company: WHOOP INTERNATIONAL TRADING LIMITED

WHOOP INTERNATIONAL TRADING LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024.04.24 Subject; Request for Confidentiality FCC ID: 2AP7LCHIPPY To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Part List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Kang Ping Title: Manager

Page 1 of 5 Report No.: STS2403326 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: CHIPPY Photo 1 Photo 2 Page 2 of 5 Report No.: STS2403326 Photo 3 Photo 4 Page 3 of 5 Report No.: STS2403326 Photo 5 Photo 6 Page 4 of 5 Report No.: STS2403326 Photo 7 Photo 8 Page 5 of 5 Report No.: STS2403326 Photo 9 Photo 10

FCC Label WHOOP INTERNATIONAL TRADING LIMITED Model name: CHIPPY FCC ID: 2AP7LCHIPPY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 50mm 40mm

Page 1 of 6 Report No.: STS2403326 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: CHIPPY Photo 1 Photo 1 LTE DIV Antenna BT/WIFI Antenna GSM/WCDMA/LTE Antenna Page 2 of 6 Report No.: STS2403326 Photo 3 Photo 4 Page 3 of 6 Report No.: STS2403326 Photo 5 Photo 6 Page 4 of 6 Report No.: STS2403326 Photo 7 Photo 8 Page 5 of 6 Report No.: STS2403326 Photo 9 Photo 10 Page 6 of 6 Report No.: STS2403326 Photo 11 Photo 12

Page 1 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes noresponsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. SAR Test Report Report No.:LCSA04094069E Issued for WHOOP INTERNATIONAL TRADING LIMITED Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 4G SMARTPHONE Brand Name: ROVER Model Name: CHIPPY Series Model(s): N/A FCC ID: 2AP7LCHIPPY Test Standards: ANSI/IEEE Std. C95.1-1992 FCC 47 CFR Part 2 ( 2.1093) IEC/IEEE 62209-1528 Max. SAR (1g) Head: 0.302 W/kg Body: 0.665 W/kg S T L A B S Page 2 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E TEST REPORT Applicant’s name ................. : WHOOP INTERNATIONAL TRADING LIMITED Address ................................. : Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Manufacture's Name ............ : Shenzhen Teleone Technology Co.,Ltd Address ................................. : Tower B 5/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, 4093 Liuxian Avenue, Shenzhen, China Product description Product Name ........................ : 4G SMARTPHONE Brand Name ........................... : ROVER Model Name ......................... : .. : CHIPPY Series Model(s) ...................... : N/A Standards ............................. : ANSI/IEEE Std. C95.1-1992 FCC 47 CFR Part 2 ( 2.1093) IEC/IEEE 62209-1528 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes noresponsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test Date (s) of performance of tests ............. : 29 Mar. 2024 ~ 09 Apr. 2024 Date of Issue .......................................... : 12 Apr. 2024 Test Result .............................................. : Pass Compiled by: Supervised by: Approved by: Jay Zhan/ File administrators Cary Luo / Technique principal Gavin Liang / Manager Page 3 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Table of Contents 1. General Information 6 1.1 EUT Description 6 1.2 Test Environment 8 1.3 Test Factory 8 2. Test Standards and Limits 9 3. SAR Measurement System 10 3.1 SAR Measurement Set-up 10 3.2OPENSAR E-field Probe System 11 3.3Phantoms 12 3.4Device Holder 13 3.5Scanning Procedure 13 3.6Data Storage and Evaluation 15 4. Tissue Simulating Liquids 17 4.1 Simulating Liquids Parameter Check 17 5. SAR System Validation 20 5.2 Validation Result 22 6. SAR Evaluation Procedures 23 7. EUT Antenna Location Sketch 24 8. EUT Test Position 29 8.1 Define Two Imaginary Lines on the Handset 29 8.2 Hotspot mode exposure position condition 30 9. Measurement Uncertainty 31 10. Conducted Power Measurement 33 10.1 Test Result 33 11. EUT And Test Setup Photo 63 11.1 EUT Photo 63 11.2 Setup Photo 64 12. SAR Result Summary 69 12.1 Head-worn SAR 69 12.2 Body-worn SAR 74 13. Equipment List 81 Appendix A. System Validation Plots 82 Appendix B. SAR Test Plots 94 15.CALIBRATION CERTIFICATES 128 15.1Probe-EPGO376 Calibration Certificate 128 Page 4 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E 15.2SID750Dipole Calibration Ceriticate 139 15.3SID835Dipole Calibration Ceriticate 150 15.4SID1800 Dipole Calibration Certificate 161 15.5SID1900 Dipole Calibration Certificate 172 15.6SID2450 Dipole Calibration Ceriticate 183 15.7SID2600 Dipole Calibration Ceriticate 194 16.SAR System PHOTOGRAPHS 205 17.EUT PHOTOGRAPHS 206 Page 5 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Revision History Rev. Issue Date Report No. Effect Page Contents 00 12 Apr. 2024 LCSA04094069E ALL Initial Issue Page 6 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name 4G SMARTPHONE Brand Name ROVER Model Name CHIPPY Series Model(s) N/A Model Difference N/A Battery Rated Voltage: DC3.8V Charge Limit Voltage: 4.35V Capacity: 3750 Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled Hardware Version J518A_63_32EMB_D3EFV1.0 Software Version RROVER_CHIPPY_14_V01_20240316 Frequency Range GSM 850: 824 MHz ~ 849 MHz PCS1900: 1850 MHz ~ 1910 MHz WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV:1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2:1850~1910MHz LTE Band 4:1710~1755MHz LTE Band 5:824~849MHz LTE Band 12:699~716MHz LTE Band 13:777~787MHz LTE Band 25:1850~1915MHz LTE Band 26 Part 22: 824-849 MHz LTE Band 26 Part 90: 814~849MHz LTE Band 41: 2496-2690 MHz LTE Band 66:1710~1780MHz LTE Band 71: 663-698MHz WLAN802.11b/g/n20: 2412 MHz ~ 2462 MHz Bluetooth: 2402 – 2480 MHz Page 7 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Max. Reported SAR(1g): (Limit:1.6W/kg) Band Mode Head (W/kg) Body Worn and Hotspot (W/kg) PCE GSM 850 0.286 0.273 PCE GSM 1900 0.080 0.354 PCE WCDMA Band II 0.302 0.652 PCE WCDMA Band V 0.136 0.510 PCE WCDMA Band IV 0.225 0.206 PCE LTE Band 2 0.143 0.665 PCE LTE Band 4 0.227 0.422 PCE LTE Band 5 0.248 0.256 PCE LTE Band 12 0.215 0.312 PCE LTE Band 13 0.134 0.176 PCE LTE Band 25 0.126 0.139 PCE LTE Band 26 0.218 0.249 PCE LTE Band 41 0.107 0.143 PCE LTE Band 66 0.200 0.464…

Text truncated - open the document above for the full version.

Page 116 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 23: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-02 ConvF 1.48 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Right Head Band LTE Band 26 (RB 1) Signal LTE (Crest factor: 1.0) Frequency (MHz) 821.5 Relative permittivity (real part) 41.35 Conductivity (S/m) 0.93 Maximum location: X=-55.00, Y=-39.00 SAR Peak: 0.26 W/kg SAR 10g (W/Kg) 0.151103 SAR 1g (W/Kg) 0.199730 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 117 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 24: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-02 ConvF 1.48 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Side Band LTE Band 26 (RB 1) Signal LTE (Crest factor: 1.0) Frequency (MHz) 821.5 Relative permittivity (real part) 41.35 Conductivity (S/m) 0.93 Maximum location: X=-8.00, Y=7.00 SAR Peak: 0.29 W/kg SAR 10g (W/Kg) 0.171653 SAR 1g (W/Kg) 0.228540 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 118 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 25: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-08 ConvF 1.85 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Right Head Band LTE Band 41 (RB 1) Signal LTE (Crest factor: 1.0) Frequency (MHz) 2593 Relative permittivity (real part) 40.03 Conductivity (S/m) 1.95 Maximum location: X=-53.00, Y=-2.00 SAR Peak: 0.16 W/kg SAR 10g (W/Kg) 0.060684 SAR 1g (W/Kg) 0.097497 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 119 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 26: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-08 ConvF 1.85 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Side Band LTE Band 41 (RB 1) Signal LTE (Crest factor: 1.0) Frequency (MHz) 2593 Relative permittivity (real part) 40.03 Conductivity (S/m) 1.95 Maximum location: X=31.00, Y=-9.00 SAR Peak: 0.23 W/kg SAR 10g (W/Kg) 0.070236 SAR 1g (W/Kg) 0.130388 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 120 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 27: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-03 ConvF 1.85 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Right Head Band LTE Band 66 (RB 1) Signal LTE (Crest factor: 1.0) Frequency (MHz) 1745 Relative permittivity (real part) 40.23 Conductivity (S/m) 1.34 Maximum location: X=-57.00, Y=-16.00 SAR Peak: 0.26 W/kg SAR 10g (W/Kg) 0.128494 SAR 1g (W/Kg) 0.193623 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 121 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 28: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-03 ConvF 1.85 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Side Band LTE Band 66 (RB 1) Signal LTE (Crest factor: 1.0) Frequency (MHz) 1745 Relative permittivity (real part) 40.23 Conductivity (S/m) 1.34 Maximum location: X=1.00, Y=-18.00 SAR Peak: 0.69 W/kg SAR 10g (W/Kg) 0.258057 SAR 1g (W/Kg) 0.448513 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 122 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 29: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-01 ConvF 1.85 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Right Head Band LTE Band 71 (RB 1) Signal LTE (Crest factor: 1.0) Frequency (MHz) 688 Relative permittivity (real part) 42.80 Conductivity (S/m) 0.92 Maximum location: X=-58.00, Y=-38.00 SAR Peak: 0.29 W/kg SAR 10g (W/Kg) 0.183729 SAR 1g (W/Kg) 0.237304 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 123 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 30: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-01 ConvF 1.85 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Side Band LTE Band 71 (RB 1) Signal LTE (Crest factor: 1.0) Frequency (MHz) 688 Relative permittivity (real part) 42.80 Conductivity (S/m) 0.92 Maximum location: X=1.00, Y=-18.00 SAR Peak: 0.69 W/kg SAR 10g (W/Kg) 0.258057 SAR 1g (W/Kg) 0.448513 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 124 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 31: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-07 ConvF 1.75 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Right Head Band IEEE 802.11b ISM Signal IEEE802.b (Crest factor: 1.0) Frequency (MHz) 2462 Relative permittivity (real part) 39.49 Conductivity (S/m) 1.86 Maximum location: X=-14.00, Y=23.00 SAR Peak: 0.40 W/kg SAR 10g (W/Kg) 0.111724 SAR 1g (W/Kg) 0.218473 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 125 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 32: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-07 ConvF 1.75 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Side-ANT 1 Band IEEE 802.11b ISM Signal IEEE802.b (Crest factor: 1.0) Frequency (MHz) 2462 Relative permittivity (real part) 39.49 Conductivity (S/m) 1.86 Maximum location: X=9.00, Y=21.00 SAR Peak: 0.13 W/kg SAR 10g (W/Kg) 0.048013 SAR 1g (W/Kg) 0.078589 SURFACE SAR VOLUME SAR 3D Z Axis Scan Page 126 of 206 FCC ID: 2AP7LCHIPPY Report No.: LCSA04094069E Plot 33: DUT: 4G SMARTPHONE EUT Model: CHIPPY Test Date 2024-04-07 ConvF 1.75 Probe SN 25/22 EPGO376 Area Scan dx=15mm dy=15mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Right …

Text truncated - open the document above for the full version.

One stop communication RF antenna solution service provider 第 1 页 Shenzhen Anwei Wireless Technology Co., Ltd Specification of ROVER CHIPPY antenna Customer Shenzhen Teleone Technology Co.,Ltd Specs ROVER CHIPPY Part Number AW006-SP136G-021-A0 AW006-SP136G-022-A0 Frequency Band 2400-2500MHz Color Black Edition REV:A0 Salesperson Design Structure Confirm Date 2024/03/07 Signing Date Customer confirmation: Join hands to create the future One stop communication RF antenna solution service provider 第 2 页 一、Product specification The report mainly provides the parameter test of R10 antenna performance. 1 天线 二、Electrical performance 1. specification standards The working frequency band of CHIPPY antenna is 2400-2500MHZ the resonance occurs in this frequency band. 2. The matching circuit of the antenna The structure of the antenna: LDS One stop communication RF antenna solution service provider 第 3 页 三、Parameter testing 1. Test setup The VSWR test device is connected in turn: E5071B network analyzer→50 ohm coaxial Cable→110mmcopper pipe→test fixture Treatment of test fixtures A hard cable is used to lead out the SMA-J connector from the 50 ohm test point of the antenna on the mobile phone PCB, which is connected with the copper tube with a choke, and then connected to other devices in turn 2. Test result all going well 四、Setup for active testing The active test device is connected in turn Agilent8960→50ohm coaxial Cable→Satimo SG16test system→The tablet to be tested 1. Test site AW Microwave anechoic chamber: The test frequency range is 400MHz—6GHz,The range of static zone is 40cm circle,The reflectivity is less than -90 dB 2. Test result The maximum radiated power and the maximum receiving sensitivity reflect the maximum radiated power and the best receiving performance of the antenna in the whole radiated space.TRP and TIS reflect the average radiated power and average receiving sensitivity of the antenna, that is, the overall receiving performance of the antenna. Following is the test result of the BT/WIFI three in one antenna of ROVER CHIPPY: One stop communication RF antenna solution service provider 第 4 页 3. Environmental enrichment： One stop communication RF antenna solution service provider 第 5 页 One stop communication RF antenna solution service provider 第 6 页 五、Structural drawings One stop communication RF antenna solution service provider 第 7 页 （2.4G WIFI/BT antenna） apple Map （2.4G WIFI/BT antenna） PolarGraphs/EtotalGraphs One stop communication RF antenna solution service provider 第 8 页

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2403326W01 Issued for WHOOP INTERNATIONAL TRADING LIMITED Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 4G SMARTPHONE Brand Name: RO…

Text truncated - open the document above for the full version.