2AP7LTAB10US10.1 inch Quad Core 4G Tablet PC

WHOOP INTERNATIONAL TRADING LIMITED Covered Equipment Certification Attestation Letter 3/27/2023 ATTN.: Reviewing Engineer FCC ID: 2AP7LTAB10US WHOOP INTERNATIONAL TRADING LIMITED (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. WHOOP INTERNATIONAL TRADING LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Kang Ping Title: President Company Name: WHOOP INTERNATIONAL TRADING LIMITED Date: 3/27/2023

JOC Australia Inc * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 3/29/2023 ATTN.: Reviewing Engineer Per section 2.911(d)(7) of the FCC rules, WHOOP INTERNATIONAL TRADING LIMITED (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: JOC Australia Inc Physical U.S. Company Address: 18351 Colima Road Ste 585 Rowland Heights, California, 91748 United States of America Agent contact name/Title : Benjamin.Smith/Vice President Agent Email Address: [email protected]/[email protected] Tel No.: +1(626) 217 4778 FRN No.: 0033379421 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different to Applicant): Signed: Signed: Printed name: Kang Ping Printed name: Benjamin. Smith Title: President Title: Vice President Company Name: WHOOP INTERNATIONAL Company Name: JOC Australia Inc TRADING LIMITED Date: 3/29/2023 Date: 3/29/2023 FCC Grantee Code: 2AP7L

WHOOP INTERNATIONAL TRADING LIMITED Agent Authorization Company: WHOOP INTERNATIONAL TRADING LIMITED Address: Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 10.1 inch Quad Core 4G Tablet PC Model Number(s): TAB-10US Product Description: 10.1 inch Quad Core 4G Tablet PC FCC ID: 2AP7LTAB10US We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023.05.09 Name: Kang Ping Title: Manager Company: WHOOP INTERNATIONAL TRADING LIMITED

WHOOP INTERNATIONAL TRADING LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023.05.09 Subject; Request for Confidentiality FCC ID: 2AP7LTAB10US To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Part List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: WHOOP INTERNATIONAL TRADING LIMITED Title: Manager

Page 1 of 3 Report No.: STS2303348 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: TAB-10US Photo 1 Photo 2 Page 2 of 3 Report No.: STS2303348 Photo 3 Photo 4 Page 3 of 3 Report No.: STS2303348 Photo 5 Photo 6

FCC Label 10.1 inch Quad Core 4G Tablet PC Model name: TAB-10US FCC ID: 2AP7LTAB10US This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 50mm 40mm

Page 1 of 4 Report No.: STS2303348 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: TAB-10US Photo 1 Photo 2 GSM/WCDMA/LTE Antenna BT/WIFI Antenna Page 2 of 4 Report No.: STS2303348 Photo 3 Photo 4 Page 3 of 4 Report No.: STS2303348 Photo 5 Photo 6 Page 4 of 4 Report No.: STS2303348 Photo 7 Photo 8

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] FCC SAR TEST REPORT Report No.: STS2303348H01 Issued for WHOOP INTERNATIONAL TRADING LIMITED Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 10.1 inch Quad Core 4G Tablet PC Brand Name: WHOOP Model Name: TAB-10US Series Model: N/A FCC ID: 2AP7LTAB10US Test Standard: ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 ( 2.1093) IEC/IEEE 62209-1528 Max. Report SAR (1g): Body: 0.925 W/kg S T L A B S Page 2 of 89 Report No.: STS2303348H01 Test Report Certification Applicant’s name ................. : WHOOP INTERNATIONAL TRADING LIMITED Address ................................. : Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Manufacturer's Name .......... : Shenzhen Teleone Technology Co.,Ltd Address ................................. : Tower B 5/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, 4093 Liuxian Avenue, Shenzhen, China Product description Product name ........................ : 10.1 inch Quad Core 4G Tablet PC Brand name ......................... : WHOOP Model name ......................... : TAB-10US Series Model .......................... : N/A Standards ............................. : ANSI/IEEE Std. C95.1-1992 FCC 47 CFR Part 2 ( 2.1093) IEC/IEEE 62209-1528 The device was tested by Shenzhen STS Test Services Co., Ltd. in accordance with the measurement methods and procedures specified in KDB 865664 The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of Test ........................................... : Date (s) of performance of tests ............. : 24 Apr. 2023 ~ 04 May 2023 Date of Issue .......................................... : 05 May 2023 Test Result.............................................. : Pass Testing Engineer : (Shifan. Long) Technical Manager : (Sean she) Authorized Signatory : (Bovey Yang) Page 3 of 89 Report No.: STS2303348H01 Table of Contents 1. General Information 5 1.1 EUT Description 5 1.2 Test Environment 7 1.3 Test Factory 7 2. Test Standards and Limits 8 3. SAR Measurement System 9 3.1 Definition of Specific Absorption Rate (SAR) 9 3.2 SAR System 9 4. Tissue Simulating Liquids 12 4.1 Simulating Liquids Parameter Check 12 5. SAR System Validation 15 5.1 Validation System 15 5.2 Validation Result 15 6. SAR Evaluation Procedures 16 7. EUT Antenna Location Sketch 17 7.1 SAR test exclusion consider table 18 8. EUT Test Position 23 8.1 Body-worn Position Conditions 23 9. Uncertainty 24 9.1 Measurement Uncertainty 24 10. Conducted Power Measurement 25 10.1 Test Result 25 11. EUT and Test Setup Photo 45 11.1 EUT Photo 45 11.2 Setup Photo 48 12. SAR Result Summary 50 12.1 Body-worn and Hotspot SAR 50 13. Equipment List 56 Appendix A. System Validation Plots 57 Appendix B. SAR Test Plots 73 Appendix C. Probe Calibration and Dipole Calibration Report 89 Page 4 of 89 Report No.: STS2303348H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 05 May 2023 STS2303348H01 ALL Initial Issue Page 5 of 89 Report No.: STS2303348H01 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name 10.1 inch Quad Core 4G Tablet PC Brand Name WHOOP Model Name TAB-10US Series Model N/A Model Difference N/A Battery Rated Voltage:3.8V Charge Limit Voltage:4.35 V Capacity: 5100mAh Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled IMEI IMEI 1: 359679048482895 IMEI 2: 867400020316620 Hardware Version J866B_610&310_D4F_V1.0 Software Version WHOOP_TAB-10US_13_V01_20230321 Frequency Range GSM 850: 824 MHz ~ 849 MHz PCS1900: 1850 MHz ~ 1910 MHz WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV:1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 66: 1710 MHz ~ 1780 MHz WLAN802.11b/g/n20: 2412 MHz ~ 2462 MHz WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5150 ~ 5250 MHz WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5250 ~ 5350 MHz WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5470 ~ 5725 MHz WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5725 ~ 5850 MHz Bluetooth: 2402 MHz to 2480 MHz Page 6 of 89 Report No.: STS2303348H01 Max. Reported SAR(1g): (Limit:1.6W/kg) Band Mode Body Worn and Hotspot(W/kg) PCB GSM 850 0.925 PCB GSM 1900 0.671 PCB WCDMA Band II 0.397 PCB WCDMA Band IV 0.263 PCB WCDMA Band V 0.251 PCB LTE Band 2 0.541 PCB LTE Band 4 0.267 PCB LTE Band 5 0.331 PCB LTE Band 12 0.138 PCB LTE Band 66 0.450 DTS 2.4G WLAN 0.194 DSS BT 0.037 NII 5.2G WLAN 0.517 NII 5.3G WLAN 0.335 NII 5.6G WLAN 0.561 NII 5.8G WLAN 0.237 1-g Sum SAR 1.486 FCC Equipment Class PCS Licensed Transmitter (PCB) Part 15 Spread Spectrum Transmitter (DSS) Digital Transmission System (DTS) Unlicensed National Information Infrastructure TX(NII) Operating Mode: GSM: GPRS/EGPRS Class 12 WCDMA: RMC, HSDPA, HSUPA Release 6 LTE: QPSK, 16QAM 2.4G WLAN : 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM 5G WLAN: 802.11a(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11ac(OFDM):BPS…

Text truncated - open the document above for the full version.

Page: 1/10 Ref : ACR.60.17.23.MVGB.A SHENZHEN STS TEST SERVICES CO., LTD. 1/F, BUILDING 2, ZHUOKE SCIENCE PARK, CHONGQING ROAD FUYONG, BAO’ AN DISTRICT, SHENZHEN,CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: SN 07/21 EPGO352 Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise – 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibration date: 02/24/2023 Accreditations #2-6789 and #2-6814 Scope available on www.cofrac.fr Summary: This document presents the method and results from an accredited COMOSAR E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report COMOSAR E-FIELD PROBE CALIBRATION REPORT Page: 3/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Linearity ________________________________________________________________ 4 3.2 Sensitivity _______________________________________________________________ 5 3.3 Lower Detection Limit _____________________________________________________ 5 3.4 Isotropy _________________________________________________________________ 5 3.1 Boundary Effect __________________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Measurement Results .............................................................................. 6 5.1 Sensitivity in air __________________________________________________________ 6 5.2 Linearity ________________________________________________________________ 7 5.3 Sensitivity in liquid ________________________________________________________ 8 5.4 Isotropy _________________________________________________________________ 9 6 List of Equipment .................................................................................................... 10 Ref: ACR.60.17.23.MVGB.A COMOSAR E-FIELD PROBE CALIBRATION REPORT Page: 4/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number SN 07/21 EPGO352 Product Condition (new / used) Used Frequency Range of Probe 0.15 GHz-6GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.227 M Dipole 2: R2=0.203 M Dipole 3: R3=0.195 M 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEEE 1528, FCC KDB865664 D01, CENELEC EN62209 and CEI/IEC 62209 standards. Figure 1 – MVG COMOSAR Dosimetric E field Dipole Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEEE 1528, FCC KDB865664 D01, CENELEC EN62209 and CEI/IEC 62209 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their affect. All calibrations / measurements performed meet the fore mentioned standards. 3.1 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. Ref: ACR.60.17.23.MVGB.A COMOSAR E-FIELD PROBE CALIBRATION REPORT Page: 5/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 3.2 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards. 3.3 LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurement. The required lower detection limit is 10 mW/kg. 3.4 ISOTROPY The axial isotropy was evaluated by exposing the probe to a reference wave from a standard dipole with the dipole mounted under the flat phantom in the test configuration suggested for system validations and checks. The probe was rotated along its main axis from 0 to 360 degrees in 15- degree steps. The hemispherical isotropy is determined by inserting the probe in a thin plastic box filled with tissue-equivalent liquid, with the plastic box illuminated with the fields from a half wave dipole. The dipole is rotated about its axis (0°–180°) in 15° increments. At each step the probe is rotated about its axis (0°–360°). 3.1 BOUNDARY EFFECT The boundary effect is defined as the deviation between the SAR measured data and the expected exponential decay in the liquid when the probe is oriented normal to the interface. To evaluate this effect, the liquid …

Text truncated - open the document above for the full version.

一站式通信射频天线解决方案服务商 第 1 页 深圳市安威无线科技有限公司 Specification of TAB-10US antenna 客户 Customer 泰屹 规格型号 Specs TAB-10US 安威料号 Part Number AW006-PD006-021-A0 AW006-PD006-022-A0 频 段 Frequency Band 颜 色 Color 黑色Black 版 本 Edition REV:A0 销 售 Salesperson 谢小清 设 计 Design 钟志辉 结 构 Structure 覃云林 确 认 Confirm 日 期 Date 2023/04/07 签字日期 Signing Date 客户确认Customer confirmation: 携手共进 共创未来 Join hands to create the future 一站式通信射频天线解决方案服务商 第 2 页 目录 一、产品规格Product specification 二、电器性能Electrical performance 1.规格标准specification standards 2.天线的匹配电路The matching circuit of the antenna 三、参数的测试Parameter testing 1.测试的设置Test setup 2.测试结果Test result 四、有源测试的设置Setup for active testing 1.测试的场地Test site 2.测试结果Test result 3.环境处理 Environmental enrichment 五、结构图纸Structural drawings 一、产品规格 报告主要提供TAB-10US天线性能的参数测试。TAB-10US天线为4G天线。（如下图1所示）The 一站式通信射频天线解决方案服务商 第 3 页 report mainly provides the parameter test of TAB-10US antenna performance. The antenna is 4G antenna 图1 PD006天线 二、电器性能Electrical performance 1.规格标准specification standards TAB-10US天线工作频段在700~960MHZ,1710~2200MHZ，在此频段产生谐振。 The working frequency band of TAB-10US antenna is 700M~960M and 1700M~2700M the resonance occurs in this frequency band. 2.天线的匹配电路The matching circuit of the antenna 一站式通信射频天线解决方案服务商 第 4 页 天线的结构方式：FPC+同轴线 一站式通信射频天线解决方案服务商 第 5 页 The structure of the antenna: FPC+coaxial line 三、参数的测试Parameter testing 1.测试的设置Test setup VSWR 测试装置依次的连接为：The VSWR test device is connected in turn: E5071B network analyzer→50 ohm coaxial Cable→110mm copper pipe→test fixture 测试治具的处理：Treatment of test fixtures 从平板PCB上天线50欧姆测试点处用一根硬质电缆引出SMA-J接头，与套有扼流圈 的铜管连接，再依次连接其他装置。A hard cable is used to lead out the SMA-J connector from the 50 ohm test point of the antenna on the tablet PCB, which is connected with the copper tube with a choke, and then connected to other devices in turn 2.测试结果Test result 一切正常。all going well 四、有源测试的设置Setup for active testing 有源测试装置依次的连接为：The active test device is connected in turn Agilent8960→50ohm coaxial Cable→Satimo SG16 test system→The tablet to be tested 1.测试的场地Test site AW 微波暗室 ：测试频率范围为400MHz—6GHz，静区范围为40cm周圆，反射率小 于-90 dB。 AW Microwave anechoic chamber: The test frequency range is 400MHz—6GHz,The range of static zone is 40cm circle,The reflectivity is less than -90 dB 一站式通信射频天线解决方案服务商 第 6 页 2.测试结果Test result 最大辐射功率和最大接收灵敏度反映了天线在整个辐射空间内最大功率辐射值和最 佳接收性能。TRP和TIS反映了天线的平均辐射功率和平均接收灵敏度，即反映了天 线的整体接收性能。 The maximum radiated power and the maximum receiving sensitivity reflect the maximum radiated power and the best receiving performance of the antenna in the whole radiated space.TRP and TIS reflect the average radiated power and average receiving sensitivity of the antenna, that is, the overall receiving performance of the antenna. 下面为PD006手机主天线有源测试结果：The following is the active test result of TAB-10US main antenna 一站式通信射频天线解决方案服务商 第 7 页 主天线暗室数据 Main antenna darkroom data 一站式通信射频天线解决方案服务商 第 8 页 一站式通信射频天线解决方案服务商 第 9 页 一站式通信射频天线解决方案服务商 第 10 页 2-1.三合一测试结果 2-2.蓝牙测试（Bluetooth Test）： 10米在线听音乐，打电话流畅不间断 一站式通信射频天线解决方案服务商 第 11 页 环境处理Environmental enrichment 一站式通信射频天线解决方案服务商 第 12 页 一站式通信射频天线解决方案服务商 第 13 页 五、结构图纸structural drawings 一站式通信射频天线解决方案服务商 第 14 页 一站式通信射频天线解决方案服务商 第 15 页 一站式通信射频天线解决方案服务商 第 16 页 天线增益(Antenna gain) ··············································································· Standard Band Gain(dbi) FDD_LTE FDD_B2 0.53 FDD_LTE FDD_B4 0.96 FDD_LTE FDD_B5 -1.30 FDD_LTE FDD_B12 -2.69 FDD_LTE FDD_B66 0.96 WCDMA WCDMA_B2 0.53 WCDMA WCDMA_B4 0.96 WCDMA WCDMA_B5 -1.30 GSM GSM850 -1.30 GSM GSM900 -1.50 GSM DCS1800 0.93 GSM PCS1900 0.53 5G WIFI 1.49 2.4G WIFI 1.18 BT 1.18 GPS -0.11

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, all test data presented in this report is only applicable to presented test sample. Shenzhen STS Test Services Co., Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] RADIO TEST REPORT Report No.:STS2303348W03 Issued for WHOOP INTERNATIONAL TRADING LIMITED Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 10.1 inch Quad Core 4G Tablet PC Brand: WHOOP Model Number: TAB-10US Series Model(s): N/A FCC ID: 2AP7LTAB10US Test Standard: FCC Part 15.247 S T L A B S Page 2 of 74 Report No.: STS2303348W03 TEST RESULT CERTIFICATION Applicant’s Name ..................: WHOOP INTERNATIONAL TRADING LIMITED Address ..................................: Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Manufacturer's Name ...........: Shenzhen Teleone Technology Co.,Ltd Address ..................................: Tower B 5/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, 4093 Liuxian Avenue, Shenzhen, China Product Description Product Name .........................: 10.1 inch Quad Core 4G Tablet PC Brand ....................................: WHOOP Model Number ........................:... : TAB-10US Series Model(s) ......................: N/A Test Standards ......................: FCC Part15.247 Test Procedure .......................: ANSI C63.10-2013 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STS, this document may be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test ............................................ : Date of receipt of test item ...................... : 29 Mar. 2023 Date (s) of performance of tests ............. : 29 Mar. 2023 ~ 04 Apr. 2023 Date of Issue ........................................... : 04 Apr. 2023 Test Result ............................................... : Pass Testing Engineer : (Chris Chen) Technical Manager : (Sean she) Authorized Signatory : (Bovey Yang) Page 3 of 74 Report No.: STS2303348W03 Table of Contents 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 12 2.6 EQUIPMENTS LIST 13 3. EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.2 TEST PROCEDURE 15 3.3 TEST SETUP 15 3.4 EUT OPERATING CONDITIONS 15 3.5 TEST RESULTS 16 4. RADIATED EMISSION MEASUREMENT 18 4.1 RADIATED EMISSION LIMITS 18 4.2 TEST PROCEDURE 20 4.3 TEST SETUP 21 4.4 EUT OPERATING CONDITIONS 21 4.5 FIELD STRENGTH CALCULATION 22 4.6 TEST RESULTS 23 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 36 5.1 LIMIT 36 5.2 TEST PROCEDURE 36 5.3 TEST SETUP 36 5.4 EUT OPERATION CONDITIONS 36 5.5 TEST RESULTS 36 6. POWER SPECTRAL DENSITY TEST 37 6.1 LIMIT 37 6.2 TEST PROCEDURE 37 6.3 TEST SETUP 37 Page 4 of 74 Report No.: STS2303348W03 Table of Contents 6.4 EUT OPERATION CONDITIONS 37 6.5 TEST RESULTS 37 7. BANDWIDTH TEST 38 7.1 LIMIT 38 7.2 TEST PROCEDURE 38 7.3 TEST SETUP 38 7.4 EUT OPERATION CONDITIONS 38 7.5 TEST RESULTS 38 8. PEAK OUTPUT POWER TEST 39 8.1 LIMIT 39 8.2 TEST PROCEDURE 39 8.3 TEST SETUP 40 8.4 EUT OPERATION CONDITIONS 40 8.5 TEST RESULTS 40 9. ANTENNA REQUIREMENT 41 9.1 STANDARD REQUIREMENT 41 9.2 EUT ANTENNA 41 APPENDIX 1-TEST DATA 42 1. DUTY CYCLE 42 2. MAXIMUM AVERAGE CONDUCTED OUTPUT POWER 46 3. MAXIMUM PEAK CONDUCTED OUTPUT POWER 50 4. -6DB BANDWIDTH 54 5. MAXIMUM POWER SPECTRAL DENSITY LEVEL 58 6. BAND EDGE 62 7. CONDUCTED RF SPURIOUS EMISSION 67 APPENDIX 2- EUT TEST PHOTO 74 Page 5 of 74 Report No.: STS2303348W03 Revision History Rev. Issue Date Report NO. Effect Page Contents 00 04 Apr. 2023 STS2303348W03 ALL Initial Issue Page 6 of 74 Report No.: STS2303348W03 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2013. Page 7 of 74 Report No.: STS2303348W03 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±1.197dB 2 Unwanted Emissions, conducted ±2.896dB 3 All emissions, radiated 9K-30MHz ±3.84dB 4 All emissions, radiated 30M-1GHz ±3.94dB 5 All emissions, radiated 1G-6GHz ±4.59dB 6 All emissions, radiated>6G ±5.22dB 7 Conducted Emission (9KHz-150KHz…

Text truncated - open the document above for the full version.

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, all test data presented in this report is only applicable to presented test sample. Shenzhen STS Test Services Co., Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] RADIO TEST REPORT Report No.:STS2303348W04 Issued for WHOOP INTERNATIONAL TRADING LIMITED Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Product Name: 10.1 inch Quad Core 4G Tablet PC Brand: WHOOP Model Number: TAB-10US Series Model(s): N/A FCC ID: 2AP7LTAB10US Test Standard: FCC Part 15.247 S T L A B S Page 2 of 83 Report No.:STS2303348W04 TEST RESULT CERTIFICATION Applicant’s Name ................. : WHOOP INTERNATIONAL TRADING LIMITED Address .................................. : Flat-B 8/F Chong Gming Building 72 Cheung Sha Wan Road, Kowloon, Hong Kong Manufacturer's Name ........... : Shenzhen Teleone Technology Co.,Ltd Address .................................. : Tower B 5/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, 4093 Liuxian Avenue, Shenzhen, China Product Description Product Name ........................ : 10.1 inch Quad Core 4G Tablet PC Brand .................................... : WHOOP Model Number ....................... : ... : TAB-10US Series Model(s) ...................... : N/A Test Standards ..................... : FCC Part 15.247 Test Procedure........................: ANSI C63.10-2013 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STS, this document only be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test ............................................ : Date of receipt of test item ...................... : 29 Mar. 2023 Date (s) of performance of tests ............. : 29 Mar. 2023 ~ 04 Apr. 2023 Date of Issue ...................…

Text truncated - open the document above for the full version.