2APCQ-TAC-134Magnetic Fast Wireless Charging Holder

FCC Statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Statement: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC ID: 2APCQ-TAC-134 FCC WARNING:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Install instructions: 6. Place your device into the bracket and press the clamp arm to lock it tightly. 5. Press the release button to release the clamp arms, adjust the foot support to t your phone size. Press button Install instructions: 3. Insert the mount directly into the car air vent blade, set the locking switch to proper position. 4. Connect the charging cable to the charging interface. Install instructions: 1. Insert the adjuster into the ball joint adapter. 2. Insert the ball into the socket at the back of bracket, turn the adjuster to tighten. Attentions: 1. Please use the product correctly according instructions. 4. Please do not put wireless charger close to cards with magnetic stripes or chips (ID card,credit card etc.) to avoid demagnetization 5. Please keep wireless charger at least 20 CM distance away from implantable medical device (heart pacemaker, Implantable cochlea etc.) to avoid potential interferences. 6. Please do safekeeping, do not let your kids treat wireless charger as toy to avoid unwanted accidents. The pictures only supplies the reference, please take the actual product as the standard. 2. Please do not disassemble the product or throw it to re and water, to avoid leakage that caused by electrical short circuit. 3. Please do not use wireless charger in high temperature, wet, corrosive environment, to avoid leakage that caused by damaged circuit. Product specication: LED Mode: Wireless Charging Holder 5W/7.5W/10W/15WMax 5V/9V/12V Input voltage Output power 110-205KHZ 2APCQ-TAC-134 2AInput current Frequency FCC ID Working stateLED light color Power transfer Red,blue,red blue light turn on by turns for once,then o Standby modeLight o ChargingRed light keeps on FOD WarningRed light keeps ashing Charge completeRed light keeps on Parameters: Air Vent Mount There are three levels of locking for dierent size AC vent blades. 2.5-3.5mm 1.8-2.5mm Within 1.8mm LooseFirst position Second positionThird position Parameters: Wireless Charging Holder Easy touch button to open the clamps 62-106mm 21mm Charging Indicator : Turn red when charging Type C charging interface iP 12mini iP 12(pro) iP 12 Pro Max To charge eectively, the foot support should be adjusted to align the phone receiving coil to the charging center. Alignment sticker: Features: Compatible devices: Car holder with wireless charging fuction, charges your phone conveniently when driving. Power output 5W/7.5W/10W/15W, compatible with all phones with QI standard. Full 360 degrees rotation for perfect viewing angle. Custom made magnet array, precisely compatible for iPhone 12 series. Start charging once as the phone contact with the holder, no need cable anymore. Adjustable foot support makes easy to align to the charging center. Qi disabled devices with wireless receiver or wireless charging case. Require receiver compliant with WPC Qi standard to match). Work well with: iPhone 12, iPhone12 Pro Max, iPhone12 Pro, iPhone12 mini Samsung Note 8, Note 9, iPhone XS MAS, Huawei P30 Pro, MIUI9, Samsung S10+, iPhone 8PLus, Samsung S9+, Samsung S8+, iPhone XR, Samsung S10, Samsung S7edge, Samsung S8, iPhone XS, iPhone X, Samsung S9, iPhone 8, iPhone 11, iPhone SE, Samsung S21, Samsung S20 Also work with all other Qi enabled devices. Compatible with MagSafe slim phone cover thickness within 4mm Magnetic Fast Wireless Charging Holder What is included: X 1 Air vent mount X 1 X 1 cableUSB Please read the instructions carefully before using. Pictures are for reference only, Specifications are subject to the physical product Magnetic Fast Wireless Charging Holder Instructions

DONGGUAN CHUANGLONG ELECTRONICS LIMITED. Model difference statement Product Name: Magnetic Fast Wireless Charging Holder Model N o.: TAC-134, TAC-119, G15, TAH-134 We (DONGGUAN CHUANGLONG ELECTRONICS LIMITED., King Long industrial district, xiekeng village, qingxi town, Dongguan city, Guangdong China) hereby state that all the models are the same circuit and RF module, except the model name and shell. Signature: Name: AnZhang Liao Title: President Tel: +86-0769-82098608 Email: [email protected] Date: 9.26.2021

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: DONGGUAN CHUANGLONG ELECTRONICS LIMITED. Address: King Long industrial district, xiekeng village, qingxi town, Dongguan city, Guangdong China Product Name: Magnetic Fast Wireless Charging Holder Model Number: TAC-134, TAC-119, G15, TAH-134 FCC Identifier: 2APCQ-TAC-134 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: AnZhang Liao Date: 9/26/2021 Title: President Signature of applicant:

C5266091_X10_Ed.1 1/1 DONGGUAN CHUANGLONG ELECTRONICS LIMITED. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 9/26/2021 Subject: Request for Confidentiality FCC ID: 2APCQ-TAC-134 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: AnZhang Liao Date: 9/26/2021 Title: President

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 1- EUT PHOTO Model: TAC-134 Photo 1 Photo 2 Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 ----End of Report----

印白色 长x宽 30x12.55mm MADE IN CHINA Magnetic fast Wireless Charging Holder Output:15W (max) FCC ID:2APCQ-TAC-134 Input: 5V 2A 9V 2A 12V 2A MADE IN CHINA Magnetic fast Wireless Charging Holder Output:15W (max) FCC ID:2APCQ-TAC-134 Input: 5V 2A 9V 2A 12V 2A

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 1- EUT PHOTO Model: TAC-134 Photo 1 Photo 2 Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 ----End of Report---- Coil ANT

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Tel : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi210610015-04E2 Date of issue: Sept. 26, 2021 Applicant: DONGGUAN CHUANGLONG ELECTRONICS LIMITED Product: Magnetic Fast Wireless Charging Holder Model(s): TAC-134, TAC-119, G15, TAH-134 FCC ID: 2APCQ-TAC-134 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 13 Report No.: MTi210610015-04E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 13 Report No.: MTi210610015-04E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Description of support units ................................................................................................................................ 6 2 Test facilities and accreditations .................................................................................................... 7 2.1 Test laboratory .................................................................................................................................................... 7 3 List of test equipment ..................................................................................................................... 7 4 Test result ........................................................................................................................................ 8 4.2 Test setup ........................................................................................................................................................... 9 4.3 Test Procedures .................................................................................................................................................. 9 4.4 Equipment Approval Considerations item 5 b) of KDB 680106 D01 v03r01 .................................................... 10 4.5 Test results ....................................................................................................................................................... 11 Photographs of the test setup ............................................................................................................. 13 Photographs of the EUT....................................................................................................................... 13 Page 4 of 13 Report No.: MTi210610015-04E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: DONGGUAN CHUANGLONG ELECTRONICS LIMITED Address: King Long industrial district, xiekeng village, qingxi town, Dongguan city, Guangdong China Manufacturer: DONGGUAN CHUANGLONG ELECTRONICS LIMITED Address: King Long industrial district, xiekeng village, qingxi town, Dongguan city, Guangdong China Product description Product name: Magnetic Fast Wireless Charging Holder Trademark: N/A Model name: TAC-134 Serial Model: TAC-119, G15, TAH-134 Standards: FCC CFR 47 PART 1, § 1.1310 Test method: KDB 680106 v03r01 Date of Test Date of test: 2021-07-19 ~ 2021-09-01 Te s t result: Pass Test Engineer : (Yanice Xie) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) Page 5 of 13 Report No.: MTi210610015-04E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Magnetic Fast Wireless Charging Holder Model name: TAC-134 Series Model: TAC-119, G15, TAH-134 Model difference: All the models are the same circuit and RF module, except the model name and shell Electrical rating: Input: DC 5V/2A, 9V/2A, 12V/2A Output: 5W/7.5W/10W/15W Accessories: 1. USB-C to USB-C cable (0.9 m) RF specification: Operation frequency: transmitter 1: 110 kHz – 205 kHz Modulation type: ASK Antenna type: Coil Antenna 1.2 Description of test modes All the test modes were carried out with the EUT in normal operation, the final test mode of the EUT was the worst test mode for emission test, which was shown in this report and defined as: No. Emission test modes Mode 1 Stand-by mode Mode 2 Operating mode(5W) Mode 3 Operating mode(7.5W) Mode 4 Operating mode(10W) Mode 5 Operating mode(15W) The test data only show worst test mode: Mode 5 Page 6 of 13 Report No.: MTi210610015-04E2 Address: 1…

Text truncated - open the document above for the full version.

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi210610015-04E1 Date of issue: Sept. 26, 2021 Applicant: DONGGUAN CHUANGLONG ELECTRONICS LIMITED Product: Magnetic Fast Wireless Charging Holder Model(s): TAC-134, TAC-119, G15, TAH-134 FCC ID: 2APCQ-TAC-134 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 26 Report No.: MTi210610015-04E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 26 Report No.: MTi210610015-04E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Description of support units ................................................................................................................................ 6 1.4 Environmental conditions ................................................................................................................................... 6 1.5 Measurement uncertainty ................................................................................................................................... 6 2 Summary of Test Result .................................................................................................................. 7 3 Test Facilities and accreditations ................................................................................................... 8 3.1 Test laboratory .................................................................................................................................................... 8 4 List of test equipment ..................................................................................................................... 9 5 Test Results ................................................................................................................................... 10 5.1 Standard requirement ....................................................................................................................................... 10 5.2 Description of the EUT antenna ....................................................................................................................... 10 5.3 AC power line Conducted emissions ................................................................................................................ 11 5.4 Radiated emissions .......................................................................................................................................... 16 5.5 Occupied bandwidth test .................................................................................................................................. 23 6 Photographs of the test setup ...................................................................................................... 25 7 Photographs of the EUT ............................................................................................................... 26 Page 4 of 26 Report No.: MTi210610015-04E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: DONGGUAN CHUANGLONG ELECTRONICS LIMITED Address: King Long industrial district, xiekeng village, qingxi town, Dongguan city, Guangdong China Manufacturer: DONGGUAN CHUANGLONG ELECTRONICS LIMITED Address: King Long industrial district, xiekeng village, qingxi town, Dongguan city, Guangdong China Product description Product name: Magnetic Fast Wireless Charging Holder Trademark: N/A Model name: TAC-134 Serial Model: TAC-119, G15, TAH-134 Standards: FCC 47 CFR Part 15 Subpart C Test method: ANSI C63.10-2013 Date of Test Date of test: 2021-07-19 ~ 2021-09-01 Te s t result: Pass Test Engineer : (Yanice Xie) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) Page 5 of 26 Report No.: MTi210610015-04E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Magnetic Fast Wireless Charging Holder Model name: TAC-134 Series Model: TAC-119, G15, TAH-134 Model difference: All the models are the same circuit and RF module, except the model name and shell Electrical rating: Input: DC 5V/2A, 9V/2A, 12V/2A Output: 5W/7.5W/10W/15W Accessories: 1. USB-C to U…

Text truncated - open the document above for the full version.

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 2- Test setup photo Model: TAC-134 Radiated emissions – Blew 30 MHz Radiated emissions –Blew 1 GHz Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Conducted emissions Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] MPE ----End of Report----