2APJ4-SLM336QLTE Cat1 Module

SL336QHardwareDesignManual SL336Q HardwareDesignManual0/1 SLM336QHardware DesignManual VersionNumber:V1.01 Releaseddate:2024/6 SL336QHardwareDesignManual SL336Q HardwareDesignManual1/62 IMPORTANTNOTICE COPYRIGHTNOTICE Copyright©MeiGSmartTechnologyCo.,Ltd.Allrightsreserved. AllcontentsofthismanualareexclusivelyownedbyMeiGSmartTechnologyCo.,Ltd(MeiGSmartfor short),whichisundertheprotectionofChineselawsandcopyrightlawsininternationalconventions. Anyoneshallnotcopy,spread,distribute,modifyoruseinotherwayswithitscontentswithoutthe writtenauthorizationofMeiGSmart.Thosewhoviolatedwillbeinvestigatedbycorrespondinglegal liabilityinaccordancewiththelaw. NOGUARANTEE MeiGSmartmakesnorepresentationorwarranty,eitherexpressorimplied,foranycontentinthis document,andwillnotbeliableforanyspecificmerchantabilityandapplicableoranyindirect,particular andcollateraldamage. CONFIDENTIALITY Allinformationcontainedhere(includinganyattachments)isconfidential.Therecipientacknowledges theconfidentialityofthisdocument,andexceptforthespecificpurpose,thisdocumentshallnotbe disclosedtoanythirdparty. DISCLAIMER MeiGSmartwillnottakeanyresponsibilityforanypropertyandhealthdamagecausedbytheabnormal operationofcustomers.Pleasedeveloptheproductaccordingtothetechnicalspecificationand designingreferenceguidewhichdefinedintheproductmanual.MeiGSmarthavetherighttomodifythe documentaccordingtotechnicalrequirementwithnoannouncementtothecustomer. SL336QHardwareDesignManual SL336Q HardwareDesignManual2/62 RevisionHistory NO Version number TimeAuthorReasonsforrevision 1V1.002023-10 Hardware Department Initialestablishment 2V1.012024-6 Hardware Department ModifythemaximumvalueofVBATlimit to5V;ModifyPIN1description comments；ModifyShutdownleakage current； SL336QHardwareDesignManual SL336Q HardwareDesignManual3/62 Content Content...............................................................................................................................................................3 1Introduction ...................................................................................................................................................5 1.1SafetyInstruction.........................................................................................................................................6 1.2DocumentationPurposes ...........................................................................................................................7 1.3Content..........................................................................................................................................................7 2ProductOverview .........................................................................................................................................8 2.1BasicDescription.........................................................................................................................................8 2.2MainPerformance .......................................................................................................................................8 2.3FunctionalBlockDiagram..........................................................................................................................9 2.4EvaluationBoard.......................................................................................................................................10 3ApplicationInterface.................................................................................................................................11 3.1BasicDescription .......................................................................................................................................11 3.2LCCCardPinDefinition ...........................................................................................................................12 3.3PINDescription..........................................................................................................................................12 3.4Power..........................................................................................................................................................22 3.4.1PowerSupply..................................................................................................................................22 3.4.2ReduceVoltageDrop ....................................................................................................................23 3.4.3PowerSupplyReferenceCircuit ..................................................................................................24 3.4.4VDD_EXTVoltageOutput ............................................................................................................24 3.5SwitchMachine........................................................................................................................................24 3.5.1PWRKEYPinboot.........................................................................................................................24 3.5.2Shutdown.........................................................................................................................................26 3.6Reset ...........................................................................................................................................................27 3.6.1HardwareReset ..............................................................................................................................27 3.6.2ATCommandReset......................................................................................................................28 3.7USIM/SIMPort...........................................................................................................................................28 3.8USBInterface.............................................................................................................................................30 3.8.1USBPinDescription ............................…

Text truncated - open the document above for the full version.

[MeiG Smart Technology Co., Ltd] [ 2nd Floor,Office Building,No.5 Lingxia Road,Fenghuang,Fuyong Street,Bao'an District,Shenzhen, China ] Date: [2024/8/12] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: [2APJ4-SLM336Q] US Agent – Attestation Statement / Part 2.911(d)(7) [MeiG Smart Technology Co., Ltd]certifies, that as of [2024/8/12], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: [2APJ4-SLM336Q]. FRN:0027430412 [MeiG Smart Technology Co., Ltd], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [MeiG Smart Technology Co., Ltd] for FCC ID: [2APJ4-SLM336Q]. FRN:0027430412 Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [MeiG Smart Technology Co., Ltd] Designated Agent: FCC US Agent, LLC Company Representative: [Xinwei Lou] Designated Agent Representative: Tim Payne Signature: Signature:

MeiG Smart Technology Co., Ltd To: Federal Communications Commission Date: 2024/8/12 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) [MeiG Smart Technology Co., Ltd ] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) [MeiG Smart Technology Co., Ltd ](“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: FCC ID: 2APJ4-SLM336Q If you have any questions, please feel free to contact me Contact Person: Xinwei Lou Position in the Company: MeiG Smart Technology Co., Ltd Date of Signature: August 12,2024 ___________________________ Signatory (signature of the applicant)

MeiG Smart Technology Co., Ltd LETTER OF AGENCY Date: 2024/8/26 Element Materials Technology 100 Frobisher Business Park Malvern Worcestershire WR14 1BX UK FCC ID: 2APJ4-SLM336Q To Whom It May Concern: We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application, is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Yours faithfully company Signature Printed Name: Xinwei Lou Company: MeiG Smart Technology Co., Ltd Email: [email protected] Telephone: 021-54278676

Declaration of the Modular Approval Applicant / Grantee MeiG Smart Technology Co., Ltd FCC ID: 2APJ4-SLM336Q Model: SLM336Q The single module transmitter has been evaluated then tested meeting the requirements under Part 15C Section 212 as below: Modular approval requirement EUT Condition Comply The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The radio elements of the modular transmitter have their own shielding. YES (b) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. The modular has buffered data inputs, it is integrated in chip. Please see schematic.pdf YES (c)The modular transmitter must have its own powersupply regulation. All power lines derived from the host device are regulated before energizing other circuits internal to the FCS960K- NL. Please see schematic.pdf YES (d) The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The EUT has an external antenna with non-standard connector, and this module can only be used with a host antenna circuit trace layout design which meets the antenna requirements under15.203. Please see the external photos and user manual exhibits. YES (e)The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that The SLM336Qwas tested in a stand‐ alone configuration via a PCMCIA extender. Please see spurious set‐up YES length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i))mustnotbeinsideanotherdeviceduringtesting. (f)The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. The label position of SLM336Qis clearly indicated. If the FCC ID of the module cannot be seen when it is installed, then the host label must include the text: Contains FCC ID: 2APJ4- SLM336Q . Please see the label.pdf YES (g) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any suchrequirements. A copy of these instructions must be included in the application for equipmentauthorizationrequirements,whicharebasedonthei ntendeduse/configurations. The SLM336Qis compliant with all applicable FCC rules. Detail instructions are given in the User Manual. YES (h)The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. The SLM336Qis approved to comply with the applicable RF exposure requirement, please see the MPE evaluation with 20cm as the distance restriction. YES Signature: Printed Name: Xinwei Lou Date:August 12, 2024 Job Title:Project Manager

MeiG Smart Technology Co., Ltd Request for Confidentiality Date: August 12, 2024 Subject: Confidentiality Request for: _____ FCC ID：2APJ4-SLM336Q ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ MeiG Smart Technology Co., Ltd has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, Company: MeiG Smart Technology Co., Ltd Print name : Xinwei Lou Signature:

EUT Appearance Report No.: R2407A0777 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 1 of 2 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance a: EUT EUT Appearance Report No.: R2407A0777 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 2 of 2 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. b: Antenna Picture 1: Constituents of EUT

Internal photo FCC ID: 2APJ4-SLM336Q Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 1 of 1 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo

Prepared by: Wei Fangying Approved by: Fan Guangchang Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 MPE TEST REPORT Applicant MeiG Smart Technology Co., Ltd FCC ID 2APJ4-SLM336Q Product LTE Cat1 Module Brand MEIGLink Model SLM336Q Report No. R2407A0777-M1 Issue Date August 7, 2024 Eurofins TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. MPE Test Report Report No.: R2407A0777-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 2 of 10 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ................................................................................................................................. 3 1.1 Notes of the Test Report ............................................................................................................ 3 1.2 Test Facility ................................................................................................................................ 3 1.3 Testing Location......................................................................................................................... 3 1.4 Laboratory Environment ............................................................................................................ 3 2 Description of Equipment Under Test ............................................................................................... 4 3 Maximum Tune up ............................................................................................................................. 5 4 MPE Limit .......................................................................................................................................... 6 5 RF Exposure Evaluation Result ........................................................................................................ 8 ANNEX A: The EUT Appearance ........................................................................................................... 10 MPE Test Report Report No.: R2407A0777-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 3 of 10 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test Facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) Eurofins TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform measurements. 1.3 Testing Location Company: Eurofins TA Technology (Shanghai) Co., Ltd. Address: Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China City: Shanghai Post code: 201201 Country: P. R. China Contact: Fan Guangchang Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: https://www.eurofins.com/electrical-and-electronics E-mail: [email protected] 1.4 Laboratory Environment Temperature Min. = 18C, Max. = 25C Relative humidity Min. = 20%, Max. = 80% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. MPE Test Report Report No.: R2407A0777-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 4 of 10 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment Under Test Client Information Applicant MeiG Smart Technology Co., Ltd Applicant address 2nd Floor,Office Building,No.5 Lingxia Road,Fenghuang,Fuyong Street,Bao'an District,Shenzhen, China. Manufacturer MeiG Smart Technology Co., Ltd Manufacturer address 2nd Floor,Office Building,No.5 Lingxia Road,Fenghuang,Fuyong Street,Bao'an District,Shenzhen, China. General Technologies EUT Description Model SLM336Q SN M336QA1AHE013000171 Hardware Version SLM336QA1A_MB_V1.01 Software Version V08 Frequency Band Tx (MHz) Rx (MHz) LTE Band 2 1850 ~ 1910 1930 ~ 1990 LTE Band 4 1710 ~ 1755 2110 ~ 2155 LTE Band 5 824 ~ 849 869 ~ 894 LTE Band 12 699 ~ 716 729 ~ 746 LTE Band 13 777 ~ 787 746 ~ 756 LTE Band 14 788 ~ 798 758 ~ 768 LTE Band 66 1710 ~ 1780 2110 ~ 2180 LTE Band 71 663 ~ 698 617 ~ 652 Date of Sample Received July 4, 2024 Note: 1. The EUT is sent from the applicant to Eurofins TA and the information of the EUT is declared by the applicant. 2. All indications of Pass/Fail in this report are opinions expressed by Eurofins TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. MPE Test Report Report No.: R2407A0777-M1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 5 of 10 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 3 Maximum Tune up Band Maximum Tune up (dBm) (mW) LTE Band 2 25.00 316.228 LTE Band 4 25.00 316.228 LTE Band 5 25.00 316.228 LTE Band 12 25.00 316.228 LTE Band 13 25.00 316.228 LTE…

Text truncated - open the document above for the full version.

上海杰盛康通信工程有限公司 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 杰盛康机密，未经允许，请勿转载 第 1 页共 13 页 客户承认书 SPECIFICATIONFORAPPROVAL CUSTOMER/PROJECT客户/机型： CUSTOMERP.N./客户物料号： PRODUCTNAME./物料名称：4G外置天线 MODELNO./物料型号：5Q004D SPECIFICATION/物料规格： VERSION 版本 DATE 日期 REVISIONDESCRIPTION 修订说明 T:A2017/8/1新增 T:B2019/5/27更新驻波数据 T:C2020/1/14更新数据 Pleasereturntousonecopyof“SPECIFICATIONFORAPPROVAL”withyour approvedsignature.//客户确认签字，盖章后请回传一份承认书给我司. ADD:No.358LiuyuanRD.,BaoshanUrbanIndustrialDistrict.,Shanghai,PR.China. 地址：上海市宝山城市工业园区柳园路 358 号 2 号楼 1 楼 TEL:+86-21-66276925(26/29/35) － 615 SUPPLIERAUTHORIZEDSIGNATURE/供应商承认签核 制作/ PREPARED 审核/ CHECKED 批准/ APPROVED 肖文珍 CUSTOMERAUTHORIZEDSIGNATURE/客户承认签核 项目质量 上海杰盛康通信工程有限公司 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 杰盛康机密，未经允许，请勿转载 第 2 页共 13 页 目录 TUTU目录UUTT.....................................................................................................................................2 TUTU1UUTT 名词解释 ..................................................................................................................................T4 TUTU2UUTT 测试设备 ..................................................................................................................................4 TUTU3UUTTU适用频段..................................................................................................................................4 TUTU4UUTT基本测试项目..........................................................................................................................4 TUTU4.1UUTTU驻波比图UUTT...................................................................................................................5 TUTU4.2UUTT 史密斯阻抗图 UUTT...........................................................................................................5 TUTU4.3UUTTU 辐射方向图 UUTT...............................................................................................................5 TUTU4.4UUTT 增益和效率 UUTT...............................................................................................................5 TUTU5UUTT 测试指标和数据图表 .............................................................................................................T5 TUTU5.1UUTT驻波比UUTT.......................................................................................................................5 TUTU5.1.1UUTT驻波比图UUTT........................................................................................................5 TUTU5.1.2UUTT 驻波比数据 UUTT....................................................................................................6 TUTU5.2UUTTU 史密斯阻抗圆图 UUTT.......................................................................................................6 TUTU5.3UUTT 辐射方向图 UUTT...............................................................................................................7 TUTU5.3.1UUTTH-planeUUTT...........................................................................................................7 TUTU5.3.2UUTTE-planeUUTT........................................................................................................8-9 TUTU5.4UUTT增益和效率&TRP/TISUUTT......................................................................................10-11 TUTU6UUTTU环境处理建议.......................................................................................................................11 TUTU7UUTTUTU 阻抗匹配要求 .......................................................................................................................11 TUTU8UUTT天线外形图............................................................................................................................12 TUTU8.1天线尺寸图UUTT.............................................................................................................12 上海杰盛康通信工程有限公司 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 杰盛康机密，未经允许，请勿转载 第 3 页共 13 页 TUTU8.2UUTT馈线尺寸图UUTT.............................................................................................................12 TUTU8.3UUTT 射频端尺寸图 UUTT.........................................................................................................12 TUTU9UUTT 天线安装指导 ........................................................................................................................13 TUTU9.1UU天线安装说明UUTT..........................................................................................................13 TUTU9.2UUT馈线走线说明UUTT.........................................................................................................13 TUTU10UUTT其他UUTT..............................................................................................................................13 上海杰盛康通信工程有限公司 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 杰盛康机密，未经允许，请勿转载 第 4 页共 13 页 1名词解释 dBiDecibelrelativeisotropicantenna TxTransmitfrequency RxReceivefrequency TRPTotalRadiatedPower TISTotalIsotropicSensitivity VSWRVoltageStandingWaveRatio GSMGlobalServiceforMobilecommunication DCSDigitalCommunicationSystem CDMACodeDivisionMultipleAccess WCDMAWidebandCodeDivisionMultipleAccess 2测试设备 可根据实际情况自行增减 矢量网络分析仪 综合测试仪 SATIMO64位暗室 3适用频段 将适用的频段用其他颜色标出。 制式上行下行 GSM850824MHz～849MHz869MHz～894MHz GSM900890MHz～915MHz935MHz～960MHz DCS18001710MHz～1785MHz1805MHz～1880MHz PCS19001850MHz～1910MHz1930MHz～1990MHz CDMA800825MHz～835MHz870MHz～880MHz CDMA2000824MHz～849MHz869MHz～894MHz WCDMA900880MHz-915MHz925MHz-960MHz WCDMA21001920MHz～1980MHz2110MHz～2170MHz TD-BAND391880MHz～1920MHz TD-BAND342010MHz～2025MHz2010MHz～2025MHz LTE699MHz～2700MHz 上海杰盛康通信工程有限公司 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 杰盛康机密，未经允许，请勿转载 第 5 页共 13 页 4基本测试项目 4.1驻波比图 4.2史密斯阻抗图 4.3辐射方向图 4.4增益和效率 5 测试指标和数据图表 5.1驻波比 5.1.1 驻波比图 上海杰盛康通信工程有限公司 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 杰盛康机密，未经允许，请勿转载 第 6 页共 13 页 5.1.2驻波比数据 Freq/MHz69889496017101880199021702700 VSWR 2.61.71.71.71.61.82.32.5 5.2回波图 上海杰盛康通信工程有限公司 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 杰盛康机密，未经允许，请勿转载…

Text truncated - open the document above for the full version.

Prepared by: Xu Ying Approved by: Xu Kai Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant MeiG Smart Technology Co., Ltd FCC ID 2APJ4-SLM336Q Product LTE Cat1 Module Brand MEIGLink Model SLM336Q Report No. R2407A0777-R1V2 Issue Date August 26, 2024 Eurofins TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2023)/ FCC CFR 47 Part 22H (2023). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2407A0777-R1V2 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 2 of 42 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ...................................................................................................................................... 5 1.1. Notes of the Test Report ............................................................................................................... 5 1.2. Test Facility ................................................................................................................................... 5 1.3. Testing …

Text truncated - open the document above for the full version.