2APNF-IWL102LongBoxSmart(Bluetooth)WallSconcet

1 / 5 User Manual Smart Wall Light WSW R Part 1 – How to install the Wall Light Warnings and cautions (1) All parts must be used as indicated in these instructions. This product is designed for use only with the supplied parts and/or accessories designated for use by manufacturer. Substitution of parts or accessories not designated for use with this product by manufacturer could result in personal injury or property damage, and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing. (2) Make sure to cut off power before installation (3) If there is any damage to the cord, Please cut off the power and stop using it immediately (4) Suitable for general outdoor use. (5) Do not submerge in water. (6) This product is not a toy and is not designed for use by children. (7) For safety reasons and under the terms of the warranty, the enclosed device should not be opened (8) In case of explosion. Please keep the light away from fire and high temperature. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Any Changes expressly or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specification SKU WSW R1 Input Voltage 120V Input Wattage 12-watt Output Wattage RGB, 4-watt of each color. W, 12-watt Color RGBW, W=2700K Light output 810 Lumen at 2700K, 80+CRI Wireless type BLE 5.0 (2.4G) IP rating Wet Location Use temperature -20~40°C Warranty 2-year 2 / 5 User Manual Smart Wall Light WSW R Components Installation Step 1, Mount the fixture (1) Secure the back plate (B) to the junction box with junction box screw (C). (2) Do the wiring connection with wire connector (F) and following the indication of fig.1 and fig.2. (3) Put the gasket(D) over the mounting screw(E), and fasten the lamp(A) to back plate via mounting screw. (4) To prevent moisture/water from entering the outlet box and causing a short, use clear caulking (i.e. outdoor silicone sealant) to outline the outside of lamp canopy where it meets the wall. Leave a space at the bottom to allow moisture to escape (Fig.4). Fig.1 Fig.2 Fig.3 Fixture (A) A A Fixture B Back Plate D F Mounting Screw (2pcs) Junction box Screw (2pcs) C E Wire connector (3pcs) Gasket (2pcs) Back Plate (B) Wire connector (F) Mounting screw (E) Junction box screw Gasket 3 / 5 User Manual Smart Wall Light WSW R Part 2 – How to Pair the light to smart life app? Important notes before starting - (1) Ihomeyhome bridge (Sold separately) is required working with Alexa, Google assistant or do the non-local control. Bridge is not required using as a Bluetooth light. (2) Please make sure the WiFi signal strength is strong enough for the wall light. (3) We strongly recommend that the distance between the wall light and the bridge is kept within 65ft/20m, that the distance between the bridge and your WiFi router is kept within 65ft/20m. (4) Before starting the paring, please make sure to turn on the Bluetooth and WiFi on your phone. (5) The smart light only support 2.4GHz WiFi network, not 5.0GHz. Please make sure the working network is 2.4G, and your phone is connected to it. If your WiFi router supports both 2.4G and 5.0GHz, please separate the two frequency bands in the router settings, and select the 2.4GHz for connection. Step 1, Smart Life app installation. Please choose either way below to download and install the app. (1) As per your phone system, choose the QR code to scan. (2) Search keyword ‘ Smart Life’ in Apple Store or Google Play. Step 2, Create an account on Smart life and login Note: Please keep your account and password in mind for Alexa or Google Assistant App pairing later. Step3, Add the light to smart life App (1) Find the device of ihomeyhome bridge, see the manual of ihomeyhome bridge, Tap ‘the bridge’, click the button of ‘Add new device’. (2) Power on the light with your own switch, if you find the light breathe in white light, Tap ‘ +’ button on top right corner to add devices. then find the light device and click ‘add’. If you find the light did not breathe when turn on the power. Reset the device that repeatedly turn on-off-on-off-on-off-on switch (3 times), the light breathe that mean it’s ready for the connection, Tap ‘+’ button on top right corner to add device. To find the light device and click ‘Add’’. (3) Choose your WiFi network, enter your password, and tap the ‘Next’ button. Then give a name to the light and tap the ‘Done’ button. iOS Android 4 / 5 User Manual Smart Wall Light WSW R Step 4, Give a name to the light (1) A simple name is recommended for easier voice recognition with Alexa or Google Assistant. (2) The name given to the light will be the same for voice control on Alexa or google assistant. Step 5, Control the light The named light will be shown on the app homepage. Now you can control the light (turn on/off, change colors, adjust brightness ect) with Smart life on the setting page. Step 6, How to group the wall light Note, all the light need to be the same model and already paired to smart life APP before create a group. (1), Choose any wall light on the app, click the edit button on the top right corner, then click ‘create group’. (2), Choose the wall lights you want to group from the device list and rename the group. Now you can control the wall lights and sync with the music, the colors will be synchronized in the group. 5 / 5 User Manual Smart Wall Light WSW R Part 3 – How to control the light with Amazon Alexa? Please make sure that your Alexa a…

Text truncated - open the document above for the full version.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:USAMEIHUATRADINGINC FRN:0033406166 ContactName:HarleyQuinn Address:5379PineValleyCtBoulderCO80301UnitedStates TelephoneNo:1-312-363-9424 Email:meihua-trading-inc@foxmail,com Applicant: Companyname:WACLIGHTINGCO ProductDescription:BGLinkablePIRsolarpathlight Granteecode:2APNF FCCID:2APNF-IPA302 ContactName:XiongkangLiu Address:RoomNo.390QingfengRD,QingxiTWDongguanCity,GuangdongProvince China TelephoneNo:+86-769-87311200 Email:[email protected] Companyname:WACLIGHTINGCO ProductDescription:LongBoxSmart(Bluetooth)WallSconcet Granteecode:2APNF FCCID:2APNF-IWL102 ContactName:XiongkangLiu Address:RoomNo.390QingfengRD,QingxiTWDongguanCity,GuangdongProvince China TelephoneNo:+86-769-87311200 Email:[email protected] [WACLIGHTINGCO]certifiesthat,asofthedateofthisfilingoftheapplication withtheTCB,[USAMEIHUATRADINGINC]isourdesignatedUSagentfor serviceofprocessfortheabovereferencedFCCID.[WACLIGHTINGCO] acceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanycommission relatedproceedinginvolvingequipment.[USAMEIHUATRADINGINC]accepts, asofthedateofthefilingoftheapplication,theobligationofthedesignated USagentforserviceofprocessfortheabovereferenceFCCID. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. 1/1

C5266091_X24_Ed.1 1/1 “AttestationStatements” TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 TheCommissionadoptedrulesthatprohibitequipmentauthorizationfor“covered” telecommunicationsequipmentandvideosurveillanceequipmentproducedbyentitiesidentified ontheCommission’sCoveredList 1 ,whichisperiodicallyupdated.SeetheCoveredListformore details.ThisAttestationStatementistoconfirmthatwefollowtheSection2.911(d)(5)(i)-(ii) Applicant Companyname:WACLIGHTINGCO ProductDescription:BGLinkablePIRsolarpathlight Granteecode:2APNF FCCID:2APNF-IPA3022APNF-IWL102 ContactName:XiongkangLiu Address:RoomNo.390QingfengRD,QingxiTWDongguanCity,GuangdongProvince China TelephoneNo:+86-769-87311200 Email:[email protected] i.[WACLIGHTINGCO](“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceiving anequipmentauthorizationpursuanttosection2.903oftheFCCrules.The applicantmustsignthiscertification. ii.[WACLIGHTINGCO](“theapplicant”)certifiesthat,asofthedateofthefiling oftheapplication,theapplicant[isnot]identifiedontheCoveredListasan entityproducing“covered”equipment.Theapplicantmustsignthis certification. Date:3/30/2023 Applicant’sName:XiongkangLiu Title:Manager Signature 1 TheCommission’sCoveredListispublishedbythePublicSafetyandHomelandSecurityBureauandpostedonthe Commission’swebsite.ThisCoveredList,whichisperiodicallyupdated,identifiesparticularequipment,producedby particularentities,thatconstitutes“covered”equipment.https://www.fcc.gov/supplychain/coveredlist

Modeldifferencedeclarationletter DifferencesDescription WeWACLIGHTINGCOstate: Product： LongBoxSmart(Bluetooth)WallSconcet ModelName ： iWL102-01BK01,iWL102-**,WSWR Theaboveproductwithsamecircuit,PCBlayout,electricalparts,materialsandwiring structures,thematerialsofdecorativeaccessoriesissame,Fortheproductappearance difference,thesizeisthesame,butthecoloroftheproductisdifferent(**represents differentcolor,packaging) Signatory Date:03-31.2023 Name:XiongkangLiuDate:Mar31.2023 Title:Manager Signatureofapplicant:

C5266091_X8_Ed.1 1/1 WACLIGHTINGCO LetterofAuthorization Company:WACLIGHTINGCO Address:No.390QingfengRD,QingxiTWDongguanCity,GuangdongProvince ProductName:LongBoxSmart(Bluetooth)WallSconcet ModelNumber:iWL102-01BK01,iWL102-**,WSWR FCCIdentifier:2APNF-IWL102 WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:XiongkangLiuDate:Mar31.2023 Title:Manager Signatureofapplicant:

C5266091_X10_Ed.2 1/1 WACLIGHTINGCO OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:Mar31,2023 Subject:RequestforConfidentiality FCCID:2APNF-IWL102 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality NOTE2 IDLabel/LocationNoNo AttestationStatement ☐☐ ExternalPhotosNo ☐ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☐ User’sManual ☐ NOTE 1 ☐ InternalPhotos ☐ NOTE 1 ☐ PartsList/TuneUp ☐☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☐ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERM CONFIDENTIALITY,Section3ofKDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. C5266091_X10_Ed.2 1/1 Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselected abovearewithheldfrompublicviewforaperiodof______daysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Name:XiongkangLiuDate:Mar31.2023 Title:Manager Signatureofapplicant:

Page1of3ReportNo.:FCS202303113 Externalphotos Photo1 Photo2 Page2of3ReportNo.:FCS202303113 Photo3 Photo4 Page3of3ReportNo.:FCS202303113 Photo5 Photo6

LabelandLabelLocation FCCID:2APNF-IWL102

Page1of3ReportNo.:FCS202303113 Internalphotos Photo1 Photo2 Page2of3ReportNo.:FCS202303113 Photo3 Photo4 Page3of3ReportNo.:FCS202303113 Photo6 Photo7 PCBantenna

Page1of2ReportNo.:FCS202301034W01 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com FCCRFExposure EUTDescription:LongBoxSmart(Bluetooth)WallSconcet ModelNo.:iWL102-01BK01 FCCID:2APNF-IWL102 Equipmenttype:fixedequipmen Testproceduresaccordingtothetechnicalstandards:KDB447498D01V06andFCC2.1091. 1.Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactof humanexposuretoradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) F=frequencyinMHz Formula:Pd=(Pout*G)/(4*π*r 2 ) Where: Pd=powerdensityinmW/cm 2 , Pout=outputpowertoantennainmW; G=gainofantennainlinearscale, π=3.14; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm2.Ifweknowthemaximumgainoftheantennaandthetotal powerinputtotheantenna,throughthecalculation,wewillknowthedistancerwheretheMPE limitisreached. 2.TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleand Page2of2ReportNo.:FCS202301034W01 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com highestchannelindividually. 3.TestResultofRFExposureEvaluation Modulation Channel Freq. (MHz) Conduct edpower (dBm) Max tune-up power (mW) Antenna Gain (dBi) Antenna gainnumeric Evaluation result (mW/cm2) Power density Limits (mW/cm2) GFSK 24023.892.452.501.780.0008661 24403.822.412.501.780.0008531 24803.872.442.501.780.0008621 Conclusion: the max result : 0.000866≤ 1.0 compliance with FCC's RF Exposure.

AntennaSpecification Manufacture：TUYA ProductName：BT3LAntenna AntennaType：PCB TestDate：2020.05.12 Testedby：YinhuaZhang Approvedby：Licco Antenna TestReport Content 1.GeneralDescription..............................................................................1 2.TestConfigurations................................................................................2 2.1TestEnvironment.........................................................................2 2.2TestEquipment............................................................................2 2.3TestPrinciple................................................................................2 3.TestResults...........................................................................................3 3.1GainandEfficiency.......................................................................3 3.2RadiationPattern.........................................................................4 4.AntennaDimensions.............................................................................5 5.EUTPhoto.............................................................................................5 6.TestSetupPhoto...................................................................................6 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameBT3LAntenna Productmodel BT3L AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C)25 Humidity(%RH)60 AtmosphericPressure(kPa)100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 24001.6252.29 24101.7152.17 24201.9353.14 24301.9854.16 24402.0057.62 24502.1759.64 24602.4561.55 24702.3860.64 24802.5062.86 24902.3059.85 25002.4960.41 4 3.2RadiationPattern Phi02D Phi902D Theta902D 5 2480MHz3D 4.AntennaDimensions 5.EUTPhoto 6 6.TestSetupPhoto

FCCTestReport ReportNo:FCS202303113W01 Issuedfor Applicant: WACLIGHTINGCO Address: No.390QingfengRD,QingxiTWDongguanCity, GuangdongProvince ProductName: LongBoxSmart(Bluetooth)WallSconcet BrandName: ihomeyhome ModelName: iWL102-01BK01 SeriesModel: iWL102-**,WSWR FCCID: 2APNF-IWL102 IssuedBy:FluxComplianceServiceLaboratory Add:Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-Tech Industrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com Page 2 of40ReportNo.:FCS202303113W01 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com TESTRESULTCERTIFICATION Applicant’sName......................: WACLIGHTINGCO Address......................................: No.390QingfengRD,QingxiTWDongguanCity, GuangdongProvince Manufacture'sName................: WACLIGHTINGCO Address......................................: No.390QingfengRD,QingxiTWDongguanCity, GuangdongProvince ProductDescription ProductName...........................:LongBoxSmart(Bluetooth)WallSconcet BrandName ............................... :ihomeyhome ModelName..............................:iWL102-01BK01 SeriesModel .............................. :iWL102-**,WSWR TestStandards .......................... :FCCRulesandRegulationsPart15SubpartC,Section247 TestProcedure .......................... :ANSIC63.10:2013 ThisdevicedescribedabovehasbeentestedbyFluxComplianceServiceLaboratory,thetestresults showthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditis applicableonlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofFluxCompliance ServiceLaboratory,thisdocumentmaybealteredorrevisedbyFluxComplianceServiceLaboratory, personalonly,andshallbenotedintherevisionofthedocument.. DateofTest..................................: Date(s)ofperformanceoftests.:Mar13,2023~Mar20,2023 DateofIssue.................................:Mar20,2023 TestResult....................................:Pass Testedby: (ScottShen) Reviewedby : (DukeQian) Approvedby: (JackWang) Page 3 of40ReportNo.:FCS202303113W01 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com TableofContentsPage 1.SUMMARYOFTESTRESULTS..............................................................................................6 1.1TESTFACTORY................................................................................................................7 1.2MEASUREMENTUNCERTAINTY....................................................................................7 2.GENERALINFORMATION......................................................................................................8 2.1GENERALDESCRIPTIONOFTHEEUT.........................................................................8 2.2BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED.............10 2.3DESCRIPTIONOFNECESSARYACCESSORIESANDSUPPORTUNITS................11 2.4EQUIPMENTSLIST.........................................................................................................12 3.CONDUCTEDEMISSIONMEASUREMENT.........................................................................13 4.6DBBANDWIDTH..................................................................................................................17 4.1Limit..................................................................................................................................17 4.2TestProcedure.................................................................................................................17 4.3Testsetup.........................................................................................................................17 4.4Testresults.......................................................................................................................17 4.5OriginalTestData............................................................................................................18 5.CONDUCTEDOUTPUTPOWER...........................................................................................21 5.1LIMIT................................................................................................................................21 5.2TESTPROCEDURE........................................................................................................21 5.3TESTSETUP...................................................................................................................21 5.5TESTRESULTS..............................................................................................................21 6.BANDEDGEANDSPURIOUS(CONDUCTED)....................................................................22 6.1LIMIT................................................................................................................................22 6.2TESTPROCEDURE........................................................................................................22 6.3TESTSETUP...................................................................................................................22 6.4TESTRESULTS..............................................................................................................23 6.5Originaltestdata..............................................................................................................23 7.POWERSPECTRALDENSITY..............................................................................................26 7.1LIMIT................................................................................................................................26 7.2TESTPROCEDURE........................................................................................................26 7.3TESTSETUP...........................................................…

Text truncated - open the document above for the full version.

Page 1 of2ReportNo.:FCS202303113 Blow1GHzforradiatedemissiontestsetup Above1GHzforradiatedemissiontestsetup Page 2 of2ReportNo.:FCS202303113 Conductedemissiontestsetup