2APYS-LPS15WPKWireless Charger Module

Safety & Regulatory Guide for [LPS-15WP K Wireless Charger Module]. Product Name：Wireless Charger Module Brand Name： LUXSHARE-ICT Type Number：LPS-15WP K Input：12Vdc 1A Output:15W Max. It is a 15W WPC wireless charger module for charging a single phone or phablet. Wireless charger is built into the base of select LENOVO AIO or PC base unit All- in-One computers. Place any Qi-enabled device on the base for charging. 1.Place the device on the base of the computer. 2.Position the device wireless charging coil directly on top of the square icon on the on the base note: The label does not affect the wireless charger function. Troubleshooting charging issues If the wireless charging feature does not work as expected, verify the following: ●Make sure that your mobile device is capable of wireless charging. See the product specifications of your mobile device. ●Make sure that your mobile device is placed correctly on the base . ●This booklet provides important safety, regulatory information that you should read before you start using your [LPS-15WP K Wireless Charger Module] ●To avoid damaging your device, accessories or any connected devices, and to reduce the risk of personal injury, discomfort, property damage or other potential hazards, follow these precautions below : ●Handle your [LPS-15WP K Wireless Charger Module] with care. You may damage the device if you disassemble, drop, bend, burn, crush or puncture your device. Using a damaged device may cause overheating or injury. Don’t expose your [LPS-15WP K Wireless Charger Module] to liquids, which can cause a short circuit and overheating. The [LPS-15WP K Wireless Charger Module] is designed to work best in ambient temperatures between 0 and 40° C. ●Maintain a distance of 10 cm from your body to be consistent with how the device is tested for compliance with RF exposure requirements. ●Compliance with 2014/53/EU Radio Equipment Directive (RED),RER 2017 (SI 2017/1206) The full text of the EU Declaration of Conformity is available at: http://www.hp.com/go/orderdocuments ● In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU,UK: WPC Frequency range Output power 110-148kHz< 0 dBuA/m@10m ●RF Exposure Information (MPE) This device meets the EU requirements and the International Commission on Non- Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. Waste Electrical and Electronic Equipment (WEEE) & Batteries Directive [or] The WEEE symbol above means that according to local laws and regulations your product [and its battery] must be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product and its battery will help conserve natural resources, protects human health, and help the environment. EMC Compliance Important: This device and power adapter have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Changes or modifications to this product not authorized by lenovo could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. Regulatory Information: United States FCC REGULATORY COMPLIANCE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. •Changes or modifications not expressly approved by Lenovo could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: 1 These devices may not cause harmful interference. 2 These devices must accept any interference received, including interference that may cause undesired operation. Maintain a distance of 20 cm (8 inches) from your body to be consistent with how the device is tested for compliance with RF exposure requirements. FCC ID: 2A P YS-L PS1 5W PK EMC COMPLIANCE STATEMENT Important: This device [and its power adapter] have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. RADIO FREQUENCY EXPOSURE This device meets the U.S. Federal Communications Commission’s (FCC) requirements fo…

Text truncated - open the document above for the full version.

Lanto Electronic Ltd. No 399, Beisheng Rd. Jinxi Town, Kunshan City, Jiangsu Province, China 215324 Date: January 27, 2021 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID.: 2APYS-LPS15WPK Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Type of Confidentiality Requested Exhibit ☒Permanent Block Diagrams ☐Short Term External Photos ☐Short Term Internal Photos ☒Permanent Operation Description/Theory of Operation ☐Permanent Parts List & Placement/BOM ☐Permanent Tune-Up Procedure ☒Permanent Schematics ☐Short Term Test Setup Photos ☐Short Term User’s Manual The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 1 80 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Frank Yen /GMA Specialist DEKRA

Lanto Electronic Ltd. No 399, Beisheng Rd. Jinxi Town, Kunshan City, Jiangsu Province, China 215324 Declaration of Authorization We Name: Lanto Electronic Ltd Address: No 399, Beisheng Rd. Jinxi Town, City: Kunshan City, Jiangsu Province, Country: China Declare that: Name Representative of agent: Frank Yen Agent Company name: DEKRA Testing and Certification Co., Ltd. Address: No.5-22, Ruishukeng, Linkou Dist., City: New Taipei City 24451, Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product Name: Wireless Charger Module Model: LPS-15WP K FCC ID: 2APYS-LPS15WPK IC ID: 23965‐LPS15WPK Trademark: LUXSHAREICT on our behalf. This is valid until January 08, 2023, or until FCC and IC certification are completed, whichever comes sooner. Date: 2022/01/08 City: Kunshan Name: Teresa Wang Function: Senior Engineer Signature:

Lanto Electronic Ltd Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: 2APYS-LPS15WPK Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. No, The LPS-15WP K module (FCC ID: 2APYS-LPS- 15WPK) will be installed only on the host device: “IdeaCentre AIO 5 27IAH7” . The module and the device will be assembled factories by professional workers. Our customer didn’t need to know how to installed the modules with the devices by themselves. We provided manuals to guide our customers to use the host device and to use wireless charge function for the host device. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. YES 3. The modular transmitter must have its own power supply regulation. YES 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). YES 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. No, The module will be installed only on the host device: Product: Personal Computer Model name: IdeaCentre AIO 5 27IAH7 Brand: Lenovo 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). YES 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. YES 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and YES Lanto Electronic Ltd Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): TERESA WANG Date: _2022/01/08 Signature: 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance.

Lanto Electronic Ltd No 399, Beisheng Rd. Jinxi Town, Kunshan City, Jiangsu Province, China 215324 Federal Communications Commission Authorization and Evaluation Division January 18, 2022 ATTESTATION FCC ID: 2APYS-LPS15WPK Product: Wireless Charger Module Model: LPS-15WP K The LPS-15WP K module (FCC id: 2APYS-LPS15WPK) will be installed only on the host device which model number is: “IdeaCentre AIO 5 27IAH7.” (Brand:Lenovo, Product name: Personal computer) The module and the device will be assembled factories by professional workers. Our customer didn’t need to know how to installed the modules with the devices by themselves. We provided manuals to guide our customers to use the host device and to use wireless charge function for the host device. Sincerely, Teresa Wang /Senior Engineer Lanto Electronic Ltd Telephone Number: +86 512 8269 8999 Fax Number: +86 512 50362802 Email: [email protected]

Report No.: 21C0383R-Product Photos Page: 2 of 12 (1) EUT Photo (2) EUT Photo Antenna Module Report No.: 21C0383R-Product Photos Page: 3 of 12 (3) EUT Photo (4) EUT Photo Report No.: 21C0383R-Product Photos Page: 4 of 12 (5) EUT Photo (6) EUT Photo

Complies with IMDA Standards [DAXXXXXX] ABCD12345678 NAME R-R-LEL-LPS15WPK CCAyyyyxxxxzzz TA-yyyy-xxxx APPROVED C-xxxyy Wireless Charger Module/無線充電模組 Model Name/型號: LPS-15WP K Input/輸入: 20Vdc,1A Output/輸出: 15W Max FCC ID:2APYS-LPS15WPK IC:23965-LPS15WPK Lanto Electronic LTD. 昆山聯滔電子有限公司 Made in China/中國製造

Report No.: 21C0383R-Product Photos Page: 5 of 12 (7) EUT Photo (8) EUT Photo Report No.: 21C0383R-Product Photos Page: 6 of 12 (9) EUT Photo (10) EUT Photo Report No.: 21C0383R-Product Photos Page: 7 of 12 (11) EUT Photo (12) EUT Photo Report No.: 21C0383R-Product Photos Page: 8 of 12 (13) EUT Photo (14) EUT Photo Report No.: 21C0383R-Product Photos Page: 9 of 12 (15) EUT Photo (16) EUT Photo Report No.: 21C0383R-Product Photos Page: 10 of 12 (17) EUT Photo (18) EUT Photo Report No.: 21C0383R-Product Photos Page: 11 of 12 (19) EUT Photo (20) EUT Photo Report No.: 21C0383R-Product Photos Page: 12 of 12 (21) EUT Photo (22) EUT Photo

Report No.: 21C0383R-RFUSMPEV02-A Page: 1 of 10 RF Exposure Evaluation Report Product Name Wireless Charger Module Model No. LPS-15WP K FCC ID. 2APYS-LPS15WPK Applicant Lanto Electronic Ltd Address No.399 baisheng Road,jinxi Town Kunshan, Jiangsu, China 215234 Date of Receipt Dec. 10, 2021 Date of Declaration Jan. 26, 2022 Report No. 21C0383R-RFUSMPEV02-A Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration repor t of the e quipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testin g system, but are based on the results of the compliance measurement. Report No.: 21C0383R-RFUSMPEV02-A Page: 2 of 10 Issued Date: Jan. 26, 2022 Report No.: 21C0383R-RFUSMPEV02-A Product Name Wireless Charger Module Applicant Lanto Electronic Ltd Address No.399 baisheng Road,jinxi Town Kunshan, Jiangsu, China 215234 Manufacturer Lanto Electronic Ltd Model No. LPS-15WP K FCC ID. 2APYS-LPS15WPK EUT Rated Voltage DC20 V, 1A EUT Test Voltage AC 120 V / 60 Hz Trade Name LUXSHAREICT Applicable Standard KDB 447498 D01 v06 For Field Strength Test Test Result Complied Documented By : ( Project Specialist / Ida Tung ) Tested By : ( Senior Engineer / Alan Chen ) Approved By : ( Manager / Tim Sung ) Report No.: 21C0383R-RFUSMPEV02-A Page: 3 of 10 Revision History Report No. Ve r s i o n Description Issued Date 21C0383R-RFUSMPEV02-A V1.0 Initial issue of report. 2022-01-26 Report No.: 21C0383R-RFUSMPEV02-A Page: 4 of 10 1. RF Exposure Evaluation 1.1. Test Equipment Equipment Manufacturer Model No./Serial No. Specification Last Cal. X EM Field Meter Wavecontrol SMP2 / 18SN0746 1 Hz - 60 GHz Apr., 2021 X Isotropic EM Field Probe Wavecontrol WP400-3 / 18WP120014 1 Hz - 400 KHz Apr., 2021 X Isotropic EM Field Probe Wavecontrol WP400 / 18WP100392 1 Hz - 400 KHz Apr., 2021 X Isotropic EM Field Probe Wavecontrol WPF8 / 18WP040835 100 KHz - 8 GHz Apr., 2021 1.2. Test Facility Ambient conditions in the laboratory: Performed Item Items Required Actual Radiated Emission Temperature (°C) 10~40 °C 25.5°C Humidity (%RH) 10~90 % 55.1% USA : FCC Registration Number: TW0033 Canada : IC Registration Number: 26930 Site Description : Accredited by TAF Accredited Number: 3023 Test Laboratory : DEKRA Testing and Certification Co., Ltd Address : No. 5-22, Ruishukeng Linkou District, New Taipei City, 24451, Taiwan Performed Location : No. 26, Huaya 1st Rd., Guishan Dist.,Taoyuan City 333411, Taiwan, R.O.C. Phone number : +886-3-275-7255 Fax number : +866-3-327-8031 Email address : [email protected] Website : http://www.dekra.com.tw Report No.: 21C0383R-RFUSMPEV02-A Page: 5 of 10 1.3. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/F 4.89/F *(900/F 2) 6 30-300 61.4 0.163 1 6 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/F 2.19/F *(180/F 2 ) 30 300-1500 27.5 0.073 0.2 30 300-1500 -- -- F/1500 30 1500-100,000 -- -- 1 30 Note: 1. RF Exposure evaluation should be conducted assuming a separation distance of 10 cm 2. The EUT is including four models for different marketing requirement. 1.4. Test Procedure The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils per the FCC 's request. (reference KDB 680106 D01 RF Exposure Wireless Charging Apps v 03r01) Report No.: 21C0383R-RFUSMPEV02-A Page: 6 of 10 1.5. Test Result of RF Exposure Evaluation for WPT Items to be covered Answer from applicant Power transfer frequency is less than 1 MHz. Operation frequency range is 123kHz. Output power from each primary coil is less than or equal to 15 watts. Output Power equal to 15W. The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Yes, allow coupling only between individual pairs of coils. Client device is placed directly in contact with the transmitter. Yes, meet the requirements. Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes, meet the requirements. The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. *Electric Field Strength (V/m) @20cm = 0.50V/m (< 307 V/m) MPE Limit (614 V/m) *50% =307 V/m *Magnetic Field Strength (A/m) @15cm =0.04 A/m (< 0.815 A/m ) MPE Limit (1.63 A/m) *50%= 0.815 A/m Report No.: 21C0383R-RFUSMPEV02-A Page: 7 of 10 Product : Wireless Charger Module Test Item : RF Exposure Evaluation Test Site : ACB1 Chamber Test Date : 2021/12/29 E-Field Emissions Test Position Frequency (MHz) Measurement Level @15cm (V/m) Limit (V/m) 50% Limit (V/m) Result Side 1 0.12800 0.440 614.0 307.0 PASS Side 2 0.12800 0.450 614.0 307.0 PASS Side 3 0.12800 0.460 614.0 307.0 PASS Side 4 0.12800 0.470 614.0 307.0 PASS Test Position Frequency …

Text truncated - open the document above for the full version.

Report No.: 21C0383R-RFUSOTHV02-A Page : 1 of 20 FCC Test Report Product Name Wireless Charger Module Model No. LPS-15WP K FCC ID. 2APYS-LPS15WPK Applicant Lanto Electronic Ltd Address No.399 baisheng Road,jinxi Town Kunshan, Jiangsu, China 215234 Date of Receipt Dec. 10, 2021 Issued Date Jan. 26, 2022 Report No. 21C0383R-RFUSOTHV02-A Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration repor t of the equipment and evaluated measurement uncertaint y herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 21C0383R-RFUSOTHV02-A Page : 2 of 20 Test Report Issued Date: Jan. 26, 2022 Report No.: 21C0383R-RFUSOTHV02-A Product Name Wireless Charger Module Applicant Lanto Electronic Ltd Address No.399 baisheng Road,jinxi Town Kunshan, Jiangsu, China 215234 Manufacturer Lanto Electronic Ltd Model No. LPS-15WP K FCC ID. 2APYS-LPS15WPK EUT Rated Voltage DC20 V, 1A EUT Test Voltage AC 120 V / 60 Hz Trade Name LUXSHAREICT Applicable Standard FCC CFR Title 47 Part 15 Subpart C ANSI C63.4: 2014, ANSI C63.10: 2013 Test Result Complied Documented By : ( Project Specialist / Ida Tung ) Tested By : ( Senior Engineer / Ivan Chuang ) Approved By : ( Senior Engineer / Alan Chen ) Report No.: 21C0383R-RFUSOTHV02-A Page : 3 of 20 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ........................................................................................................... 5 1.1. EUT Description ................................................................................................................... 5 1.2. Test System Details ............................................................................................................... 6 1.3. Configuration of Test System ............................................................................................... 7 1.4. EUT Exercise Software ......................................................................................................... 7 1.5. Test Facility ........................................................................................................................... 8 1.6. List of Test Equipment .......................................................................................................... 9 1.7. Uncertainty .......................................................................................................................... 11 2. Conducted Emission ....................................................................................................................... 12 2.1. Test Setup ............................................................................................................................ 12 2.2. Limits .................................................................................................................................. 12 2.3. Test Procedure ..................................................................................................................... 13 2.4. Test Result of Conducted Emission .................................................................................... 14 3. Radiated Emission ........................................................................................................................... 15 3.1. Test Setup ............................................................................................................................ 15 3.2. Limits .................................................................................................................................. 16 3.3. Test Procedure ..................................................................................................................... 17 3.4. Test Result of Radiated Emission ....................................................................................... 18 4. EMI Reduction Method During Compliance Testing .................................................................. 20 Appendix 1: EUT Test Photographs Appendix 2: Product Photos-Please refer to the file: 21C0383R-Product Photos Report No.: 21C0383R-RFUSOTHV02-A Page : 4 of 20 Revision History Report No. Ve r s i o n Description Issued Date 21C0383R-RFUSOTHV02-A V1.0 Initial issue of report. 2022-01-26 Report No.: 21C0383R-RFUSOTHV02-A Page : 5 of 20 1. GENERAL INFORMATION 1.1. EUT Description Product Name Wireless Charger Module Trade Name LUXSHAREICT Model No. LPS-15WP K FCC ID. 2APYS-LPS15WPK Frequency Range 110-148kHz Type of antenna Coil antenna Test Platform Product: Personal Computer Brand: Lenovo Model Name: IdeaCentre AIO 5 27IAH7 Machine Type:F0GQ******* (Where * maybe any alphanumeric, symbol or blank, for marketing purpose and no impact RF related critical components andconstructions.) Note: 1. The EUT is a Wireless Charger Module with a built-in 110-148kHz transceiver. 2. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15 Subpart C Paragraph 15.209. 3. This module is “Limited Modular Approval” (LMA). Test Mode Mode 1: Transmit Report No.: 21C0383R-RFUSOTHV02-A Page : 6 of 20 1.2. Test System Details The types for all equipment, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord 1 DVD PLAYER SAMPO DVB-123 12527058 Non-shielded, 1.8m 2 Monitor Lenovo A21215FS0 V5DMD987 Non-shielded, 1.8m 3 Microphone & Earpho…

Text truncated - open the document above for the full version.

Report No.: 21C0383R-RFUSMPEV02-A Page: 8 of 10 1.6. EUT Test Setup Photographs Side 1(15cm) Side 2(15cm) Report No.: 21C0383R-RFUSMPEV02-A Page: 9 of 10 Side 3(15cm) Side 4(15cm) Report No.: 21C0383R-RFUSMPEV02-A Page: 10 of 10 Top(20cm) Bottom(20cm)

Report No.: 21C0383R-RFUSOTHV02-A Page : 1 of 2 Appendix 1: EUT Test Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 21C0383R-RFUSOTHV02-A Page : 2 of 2 Radiated Test (Loop) Radiated Test