2AQAA-EZPADM10SETablet

，－...，，....丰田 Notice en Franc;ais--37-45 User Manual ／~－千． lntr。duction Thank you for ch。。singthis product. The device brings you much E。nveniencefor your business (supports Word飞Exce忡， send & receive e-mails勺andentertainment. Running on Micros。ftWindows 10 operating system, It brings y。uwonderful user experience. This guide serves to enable users to getto know and famlllar with the product as soon as posslble. Here we have made a brief I ntrodu ctlon In figures and w。rds.Before beglnnlnιplease refer to this use『manualcarefully. •software not includad c。ntents I. Precautions bef，。reUse, Intended Use......• •1,2 II. I ntr。ducti。nt。Deskt。p........................z l. Images about select applications.....................··3 Ill. Basic Operations.................................•4 l. Sleep, restart and shutdown ........................•4 2.Secu「ityManagement...........................• •4,5 3. Wi- Fi, Bluetooth, Flight mode ........................•6 4.Cortana , , , , , , , ..................................... 5 IV. Batterycharging................................... 7 v. BIOS-Setting &Bootmanger.....................7 VI. Troublesh。。ting..............................•7,8,9 Important Notti•: Charge the bltt.,y for at』east12hou，罗btJfortJ加，ifialstart-up. I I • Precautions befo刚』” 1. This productls sultable for use In non-tropic areas below 2,000 meters 2. Prevent this productfrom falllngtothe gr。undIt c。uldbe str。nglydamaged. 3. Keep the device away from rain, m。isture,direct sunlight and heat source. 4.Awlduslng祉Inthe亚rongmagm吐lcandstrongstatlcenv1ronmentas much as possible. 5. Onceanywa幅rorotherllquld splash回onto由Isproduct,close ltlmmedlately and do n。tuse it until it dries out. 6. Do notclean由isproduct with any dete唱，ntcontaining chem i日lelement 。rother liquid to avoid causing damage due to c。rrosl。nand becomlngdamp. If cleanlngls really necessary, clean It with dry so眈clothtissue paper. 7. Handled、esa回ngently. To c阳叶『鸣，rprintsordustonthescr，四n,use目的｜抽出dicated for camera lens instead of gauze. 8. Please backup your Important flies atanytlme t。avoidloss. 9. Please do not disassemble this product byy。urself;otherwi皿youwilllosethe right to warranty. 1 O.Do not disc。nnectthe device from p剧Nersuddenly, when formatting。rupload Ing and d。wnl。adlng,which can lead to program errors. 11.PI回seusetheoriginalACadap恒rforcharging.N。n四”forming由町’目may臼useharms. 12,Protect thl! powe『cord,When connect the power cord, do not step onto It or place any object on It, which may cause extrusion. Protect the connect。r。fthe power cord c。nnecteddevices specially. 13.Batteries The batter I回Inthis product臼nnotb剖面lly陪”缸刨by喝ersthemselves. Replacement with Inc。rrecttype batteries may cause explosl。n. 14.Whdeusi暗theearphone, if伽evolumeis田cessivelyhighit may cause h回ringdamage. Sopl田里画啕ustthevolumeof由eplayer to a mode阳也阳启Iand balance世1etlmeofuslng. 15.Plctures In this manual are for demonstration purpose only and may di伽rfromthe real pr。duct. 16. Caution I This unit con回Insbattery. Ifthe battery Is defect！·帽，ltsh。uldnotbedlsp田edohvlth household waste. Batteries can p。ssiblyc。ntainharmful substances /\ that can harm曲目『lllironmentand people‘s health. Please dispose of the f.1i<s)\ battery commercially or at a munlclp刮目cycllngplants.Return Is~ free。fcharge and Is prescribed bylaw. Please。nlydlsposeof empty batteries .........叫 .... Intended Use Thlsproducto伯阳町圃’iyopportunltl田伯rtheuse. Far目由mplesu斤Intern眈，read,..books, lo。km。vles,playgames and c。mmunlcatlonwlththewh。lew。rid. This product is intended for home and 。fficeuse and not for industrial application. -2- ”. Introduction to Deskt叩 Images ab。utselect applicati。ns＿咽 Sa me exp e rl en ce as you use Desktop PC. click E再Zfirst at left-hand side corne『， then click- 4咽a目ι二』 ’ 由自 .. . ’且h &: 画，l ：？＇立自 ’句·”“ 由何、kl 且 ,. ＇帽 - 』 I .. , 电d① . = • 13 After call outthe APP list, and select APP you need. 。 回 ” . 卢~－1 ＠匾。圃 ! o.l圄 奇怪句，，.••• / ( ~ ）。、K/Si w ① 画面 圄cJ -3- I Ill. Basic Operati。ns 1,Sleep, restart• nd Shut down More ways to pl.,y Join u,• @ ......·‘· .. Xbo, ’~』。－、“民 M刷刷<s&lV 、 lt't'μ 、hutdυwn 世咽:>I.LN宅电，砸自LM dl毡，－~• ’ ......·· ......，一 ’ ,.;!.I H』N.EC:目RFl飞．．． ...... --- ~ .. _...· .. ....筐’00芳’－...’ 、r!,1,r.. cc，向c M，凰”RMli>舶工 阳》、tar1 。 一一 －－ 28 λII• A’引叫．‘’f ".4<>’"...'" 阳而』 2, security Man•1ement User and password setup -Get in Settings呻Accounts呻Sign-inoptions to setup password. -4- ＠刷刷 ＠“刷刷 ~ E三言》 g 如 咱 问 一 (y ．．呻． ι~－－－ @ 百已 ① 凸 。 r,:::;;::c:: ---, -5- 3. WI-Fl, Bluetooth, Fll1ht mode τ。ucht。OpenSetting Tablet to set up Airplane mode I Wi-Fi I & Bluetooth,and this device can connect to 2.4G and SG Wifi. 4,Cortana y。ucan use Cortana (voice control) to set remind町s,w『itee『nails,search, and chat with friends and family on messengers. c 国 :..: .~ ... a .,~. ”『k"" 、， .! . h『.' .. ,~ 。4’A F 回l G n 昏－』‘. ·, .. e ... ”“·- •• 、NMlhlf ’如S ·,,,,1庐’＇.萨 @ • CJ -6- ·---··-·· 一...·－ 冒 ...__ .. ..., __ E一... I IV. Battery charging Connect power adapter to the powe『portofthedevl阻，Connectth叩跚erad叩阳plugInt。”。隅r outlet for cha唱Ingthe b•ttery Pleose。nlyuse the provided orlgln1l power ad•pter During charging. the icon仙甜町willbG, and when cha圳 • You日nst111 use the d凹Icewhile cha咆Ing,but this will prol。ngthecharging time. ·υsethe device at least once every week. • Fully charge the b1眈＠叩regularly. • D。n’tkeep the battery empty for I longtlme. "- 且即由V胆f1Mi.曹阳＂＂good醉月帽，t抽e/Mm,,y皿四•klbuh唱r,edfr1r• mlnlmumof 3'膺目 I V.BIOS-Setting & B。。tmanager Press and hold "ESC" bu悦。nofkeyb。ardand switch on the device {Press power button). A screen with the d『ferentoptlonsw111 appear. Use optlon-scu•for田口Sse回ngand"Boot M•nager• for operatlngsy且：emboot option. I VI. Tro1刷eshooting 1.cannotturnonth•d•词” Press the power button阳r5iecondstoturn。nthe device.If the ab。v•meth。ddoesn't work, please charge It for 30 minutes before目artlng Z,”...und fn,m urphane Che<k ifvoh』mei..目to＇口•.Tostifea叩honeis broken, iho ,pleas• <hange旬ranother earphone. 1.•l1nalH Che<k If there Is dust In the earph。ne。rspeaker. Check If the sound Ille l…

Text truncated - open the document above for the full version.

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Shenzhen Jumper Technology Co.,Ltd Address: Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen, China Phone: +86 755-83698151 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. FCC ID: 2AQAA-EZPADM10SE If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-05-13 Name / Title: zhijun Jiang / CEO Company: Shenzhen Jumper Technology Co.,Ltd Address: Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen, China Phone: +86 755-83698151 Fax: +86 755-83698151 E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2AQAA-EZPADM10SE EZpad M10SE We, applicant Company Name: Shenzhen Jumper Technology Co.,Ltd Address: Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen, China Phone: +86 755-83698151 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-05-13 Name / Title: zhijun Jiang / CEO Company: Shenzhen Jumper Technology Co.,Ltd Address: Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen, China Phone: +86 755-83698151 Fax: +86 755-83698151 E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2AQAA-EZPADM10SE EZpad M10SE For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:  the Operational Description  the Block Diagram  the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-05-13 Name / Title: zhijun Jiang / CEO Company: Shenzhen Jumper Technology Co.,Ltd Address: Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen, China Phone: +86 755-83698151 Fax: +86 755-83698151 E-Mail: [email protected]

FCC ID: 2AQAA-EZPADM10SE Fig. 1 Fig. 2 FCC ID: 2AQAA-EZPADM10SE Fig. 3 Fig. 4 FCC ID: 2AQAA-EZPADM10SE Fig. 5 Fig. 6 FCC ID: 2AQAA-EZPADM10SE Fig. 7 Fig. 8

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L7.0cm x3.5cm) Label Location

FCC ID: 2AQAA-EZPADM10SE Fig. 1 Fig. 2 FCC ID: 2AQAA-EZPADM10SE Fig. 3 Fig. 4 BT&WLAN Antenna FCC ID: 2AQAA-EZPADM10SE Fig. 5 Fig. 6 FCC ID: 2AQAA-EZPADM10SE Fig. 7 Fig. 8 FCC ID: 2AQAA-EZPADM10SE Fig. 9 Fig. 10

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 44 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China SAR Test Report For Applicant Name: Shenzhen Jumper Technology Co., Ltd. Address: B601, C601/ Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen EUT Name: Tablet Brand Name: N/A Model Number: EZpad M10SE Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230328R01801 Test Standards: 47 CFR Part 2.1093 IEEE1528-2013 IEEE C95.1-2019 KDB 447498 D01 KDB 865664 D01 KDB 865664 D02 KDB 941225 D01 KDB 941225 D05 KDB 941225 D06 KDB 248227 D01 KDB 616217 D04 KDB 648474 D04 KDB 690783 D01 FCC ID: 2AQAA-EZPADM10SE Test Conclusion: Pass Test Date: 2023-03-31 Date of Issue: 2023-03-31 Prepared By: Monica Zhou / Project Engineer Date: 2023-03-31 Approved By: Ryan.CJ / EMC Manager Date: 2023-03-31 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230328R01801 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 44 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-03-31 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230328R01801 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 44 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................... 4 1.1 Identification of Testing Laboratory ............................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location .................................................................................................................... 4 1.3 Laboratory Condition ..................................................................................................................................................................... 4 1.4 Announcement ............................................................................................................................................................................... 4 2. Product Information .................................................................................................................................................................................. 5 2.1 Application Information .................................................................................................................................................................. 5 2.2 Manufacturer Information .............................................................................................................................................................. 5 2.3 Factory Information ........................................................................................................................................................................ 5 2.4 General Description of Equipment under Test (EUT) ............................................................................................................... 5 2.5 Equipment under Test Ancillary Equipment ............................................................................................................................... 5 2.6 Technical Information .................................................................................................................................................................... 5 3. Summary of Test Results ........................................................................................................................................................................ 6 3.1 Test Standards ............................................................................................................................................................................... 6 3.2 Device Category and SAR Limit .................................................................................................................................................. 7 3.3 Test Result Summary .................................................................................................................................................................... 7 3.4 Test Uncertainty ............................................................................................................................................................................. 8 4. Measurement System ............................................................................................................................................................................ 10 4.1 Specific Absorption Rate (SAR) Definition .........................................................................................…

Text truncated - open the document above for the full version.

SWARD深圳市索沃德通讯技术有限公司 ShenzhenSuoWardCommunicationTechnologyCo.,Ltd. 深圳市宝安区前进二路135 号河西航城工业区B 栋 6 楼 电话：0755-29985185传真：0755-27487028 第 4 页 一:Test equipment and conditions: SWARD深圳市索沃德通讯技术有限公司 ShenzhenSuoWardCommunicationTechnologyCo.,Ltd. 深圳市宝安区前进二路135 号河西航城工业区B 栋 6 楼 电话：0755-29985185传真：0755-27487028 第 5 页 二:Antenna performance (1)Antennaperformance 1. Thisapprovalsheetsupportsfor MID project.FPC antennasincludein thisproject.Thisreport is fortheperformanceof GPS&WIFI&BTantenna. 2. Antennashapesize：Meettherequirementof MID 3. Antennaband：1570MHz~1580MHz，2400MHz~2500MHz&5400MHz 4. Antennamaterial：Antennamaterialmeettherequirementof MID 5. Adhesiveperformance：Adhesiveperformancemeettherequirementof MID 6. Antennaperformancemeetthespecbelow： Description1.57GHz~1.58GHz2.4GHz~2.5GHz&5GHzUnits VSWR≤2.0 AverageAntennaGain≥-4.5dB AntennaEfficiency≥35% FeedImpedance50 ohms OperatingTemperature-40to +85degC Polarization/ AzimuthLinear/ Omni-directional (2)MechanicalInformation MechanicalDimension CableLengthNA DescriptionGPS&WIFI&BTantenna MaterialFPC CoaxialCableNA Environmental OperationTemperature-40to +85degC StorageTemperature-40to +85degC SWARD深圳市索沃德通讯技术有限公司 ShenzhenSuoWardCommunicationTechnologyCo.,Ltd. 深圳市宝安区前进二路135 号河西航城工业区B 栋 6 楼 电话：0755-29985185传真：0755-27487028 第 6 页 三:Matching circuit (1)RSS-247 NA RF NA NA NA NA NA SWARD深圳市索沃德通讯技术有限公司 Shenzhen Suo Ward Communication Technology Co., Ltd. 深圳市宝安区前进二路 135 号河西航城工业区 B 栋 6 楼 电话：0755-29985185传真：0755-27487028 第 7 页 四:Standing wave ratio and Gain SWARD深圳市索沃德通讯技术有限公司 ShenzhenSuoWardCommunicationTechnologyCo.,Ltd. 深圳市宝安区前进二路135 号河西航城工业区B 栋 6 楼 电话：0755-29985185传真：0755-27487028 第 8 页 SWARD深圳市索沃德通讯技术有限公司 ShenzhenSuoWardCommunicationTechnologyCo.,Ltd. 深圳市宝安区前进二路135号河西航城工业区B栋6楼 电话：0755-29985185传真：0755-27487028 第 10 页 SWARD深圳市索沃德通讯技术有限公司 ShenzhenSuoWardCommunicationTechnologyCo.,Ltd. 深圳市宝安区前进二路135 号河西航城工业区B 栋 6 楼 电话：0755-29985185传真：0755-27487028 第 11 页 五: 3D pattern SWARD深圳市索沃德通讯技术有限公司 Shenzhen Suo Ward Communication Technology Co., Ltd. 深圳市宝安区前进二路 135 号河西航城工业区 B 栋 6 楼 电话：0755-29985185传真：0755-27487028 第 12 页 六: Antenna drawing（mm) f f

FCCID: 2AQAA-EZPADM10SE 1 Case No. : GTS20230215017-1-8 Ambient Condition: 23 °C, 51 %RH, Atmos100.1Kpa, Test Date: 2023.3.22 Test Engineer: Jenny zeng Appendix A.1: 20dB Emission Bandwidth Test Result TestMode Antenna Frequency[MHz] 20db EBW[MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.939 2401.550 2402.489 --- --- 2441 0.942 2440.547 2441.489 --- --- 2480 0.870 2479.547 2480.417 --- --- 2DH1 Ant1 2402 1.278 2401.364 2402.642 --- --- 2441 1.254 2440.367 2441.621 --- --- 2480 1.251 2479.364 2480.615 --- --- 3DH1 Ant1 2402 1.233 2401.397 2402.630 --- --- 2441 1.260 2440.370 2441.630 --- --- 2480 1.269 2479.361 2480.630 --- --- FCCID: 2AQAA-EZPADM10SE 2 Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 FCCID: 2AQAA-EZPADM10SE 3 2DH1_Ant1_2402 2DH1_Ant1_2441 FCCID: 2AQAA-EZPADM10SE 4 2DH1_Ant1_2480 3DH1_Ant1_2402 3DH1_Ant1_2441 FCCID: 2AQAA-EZPADM10SE 5 3DH1_Ant1_2480 FCCID: 2AQAA-EZPADM10SE 6 Appendix A.2: Occupied Channel Bandwidth Test Result TestMode Antenna Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.83932 2401.582 2402.421 --- --- 2441 0.83659 2440.580 2441.417 --- --- 2480 0.84088 2479.573 2480.414 --- --- 2DH1 Ant1 2402 1.1518 2401.422 2402.574 --- --- 2441 1.1515 2440.422 2441.574 --- --- 2480 1.1584 2479.415 2480.573 --- --- 3DH1 Ant1 2402 1.1539 2401.432 2402.586 --- --- 2441 1.1515 2440.434 2441.585 --- --- 2480 1.1528 2479.433 2480.585 --- --- FCCID: 2AQAA-EZPADM10SE 7 Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 FCCID: 2AQAA-EZPADM10SE 8 2DH1_Ant1_2402 2DH1_Ant1_2441 FCCID: 2AQAA-EZPADM10SE 9 2DH1_Ant1_2480 3DH1_Ant1_2402 3DH1_Ant1_2441 FCCID: 2AQAA-EZPADM10SE 10 3DH1_Ant1_2480 FCCID: 2AQAA-EZPADM10SE 11 Appendix A.3: Maximum conducted output power Test Result Peak Test Mode Antenna Frequency[MHz] Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict DH1 Ant1 2402 4.81 ≤30.00 PASS 2441 6.88 ≤30.00 PASS 2480 8.66 ≤30.00 PASS 2DH1 Ant1 2402 4.56 ≤20.97 PASS 2441 6.79 ≤20.97 PASS 2480 8.57 ≤20.97 PASS 3DH1 Ant1 2402 5.07 ≤20.97 PASS 2441 7.29 ≤20.97 PASS 2480 9.03 ≤20.97 PASS FCCID: 2AQAA-EZPADM10SE 12 Appendix A.4: Carrier frequency separation Test Result TestMode Antenna Frequency[MHz] Result[MHz] Limit[MHz] Verdict DH1 Ant1 Hop_2402 0.998 ≥0.942 PASS Hop_2441 1.162 ≥0.942 PASS Hop_2480 0.988 ≥0.942 PASS 2DH1 Ant1 Hop_2402 1.006 ≥0.848 PASS Hop_2441 0.994 ≥0.848 PASS Hop_2480 1.008 ≥0.848 PASS 3DH1 Ant1 Hop_2402 1.008 ≥0.846 PASS Hop_2441 1.02 ≥0.846 PASS Hop_2480 1 ≥0.846 PASS FCCID: 2AQAA-EZPADM10SE 13 Test Graphs DH1_Ant1_Hop_2402 DH1_Ant1_Hop_2441 DH1_Ant1_Hop_2480 FCCID: 2AQAA-EZPADM10SE 14 2DH1_Ant1_Hop_2402 2DH1_Ant1_Hop_2441 FCCID: 2AQAA-EZPADM10SE 15 2DH1_Ant1_Hop_2480 3DH1_Ant1_Hop_2402 3DH1_Ant1_Hop_2441 FCCID: 2AQAA-EZPADM10SE 16 3DH1_Ant1_Hop_2480 FCCID: 2AQAA-EZPADM10SE 17 Appendix A.5: Time of occupancy Test Result TestMode Antenna Frequency[MHz] BurstWidth [ms] TotalHops [Num] Result[s] Limit[s] Verdict DH1 Ant1 Hop 0.36 330 0.12 ≤0.4 PASS DH3 Ant1 Hop 1.63 160 0.26 ≤0.4 PASS DH5 Ant1 Hop 2.87 110 0.316 ≤0.4 PASS 2DH1 Ant1 Hop 0.38 330 0.125 ≤0.4 PASS 2DH3 Ant1 Hop 1.63 160 0.26 ≤0.4 PASS 2DH5 Ant1 Hop 2.88 110 0.317 ≤0.4 PASS 3DH1 Ant1 Hop 0.38 320 0.121 ≤0.4 PASS 3DH3 Ant1 Hop 1.63 170 0.276 ≤0.4 PASS 3DH5 Ant1 Hop 2.88 110 0.317 ≤0.4 PASS FCCID: 2AQAA-EZPADM10SE 18 Test Graphs DH1_Ant1_Hop DH3_Ant1_Hop FCCID: 2AQAA-EZPADM10SE 19 DH5_Ant1_Hop FCCID: 2AQAA-EZPADM10SE 20 2DH1_Ant1_Hop 2DH3_Ant1_Hop FCCID: 2AQAA-EZPADM10SE 21 2DH5_Ant1_Hop FCCID: 2AQAA-EZPADM10SE 22 3DH1_Ant1_Hop 3DH3_Ant1_Hop FCCID: 2AQAA-EZPADM10SE 23 3DH5_Ant1_Hop FCCID: 2AQAA-EZPADM10SE 24 FCCID: 2AQAA-EZPADM10SE 25 Appendix A.6: Number of hopping channels Test Result TestMode Antenna Frequency[MHz] Result[Num] Limit[Num] Verdict DH1 Ant1 Hop 79 ≥15 PASS 2DH1 Ant1 Hop 79 ≥15 PASS 3DH1 Ant1 Hop 79 ≥15 PASS FCCID: 2AQAA-EZPADM10SE 26 Test Graphs DH1_Ant1_Hop 2DH1_Ant1_Hop 3DH1_Ant1_Hop FCCID: 2AQAA-EZPADM10SE 27 FCCID: 2AQAA-EZPADM10SE 28 Appendix A.7: Band edge measurements Test Result TestMode Antenna ChName Frequency[MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH1 Ant1 Low 2402 4.84 -49.5 ≤-15.16 PASS High 2480 8.44 -48.91 ≤-11.56 PASS Low Hop_2402 4.37 -49.37 ≤-15.63 PASS High Hop_2480 10.79 -48.6 ≤-9.21 PASS 2DH1 Ant1 Low 2402 3.77 -49.32 ≤-16.23 PASS High 2480 7.97 -48.69 ≤-12.03 PASS Low Hop_2402 3.26 -49.16 ≤-16.74 PASS High Hop_2480 -1.49 -47.93 ≤-21.49 PASS 3DH1 Ant1 Low 2402 3.75 -49.03 ≤-16.25 PASS High 2480 7.92 -48.31 ≤-12.08 PASS Low Hop_2402 3.60 -49.37 ≤-16.41 PASS High Hop_2480 8.43 -48.67 ≤-11.57 PASS FCCID: 2AQAA-EZPADM10SE 29 Test Graphs DH1_Ant1_Low_2402 DH1_Ant1_High_2480 DH1_Ant1_Low_Hop_2402 FCCID: 2AQAA-EZPADM10SE 30 DH1_Ant1_High_Hop_2480 2DH1_Ant1_Low_2402 FCCID: 2AQAA-EZPADM10SE 31 2DH1_Ant1_High_2480 2DH1_Ant1_Low_Hop_2402 2DH1_Ant1_High_Hop_2480 FCCID: 2AQAA-EZPADM10SE 32 3DH1_Ant1_Low_2402 3DH1_Ant1_High_2480 FCCID: 2AQAA-EZPADM10SE 33 3DH1_Ant1_Low_Hop_2402 3DH1_Ant1_High_Hop_2480 FCCID: 2AQAA-EZPADM10SE 34 Appendix A.8: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH1 Ant1 2402 Reference 4.34 4.34 --- PASS 30~1000 4.34 -60.55 ≤-15.66 PASS 1000~26500 4.34 -47.52 ≤-15.66 PASS 2441 Reference 6.26 6.26 --- PASS 30~1000 6.26 -59.91 ≤-13.74 PASS 1000~26500 6.26 -47.84 ≤-13.74 PASS 2480 Reference 8.29 8.29 --- PASS 30~1000 8.29 -59.5 ≤-11.71 PASS 1000~26500 8.29 -48.29 ≤-11.71 PASS 2DH1 Ant1 2402 Reference 3.57 3.57 --- PASS 30~1000 3.57 -60.63 ≤-16.43 PASS 1000~26500 3.57 -46.58 ≤-16.43 PASS 2441 Reference 5.94 5.94 --- PASS 30~1000 5.94 -60.55 ≤-14.06 PASS 1000~26500 5.94 -47.66 ≤-14.06 PASS 2480 Reference 7.79 7.79 --- PASS 30~1000 7.79 -58.05 ≤-12.21 PASS 1000~26500 7.79 -47.28 ≤-12.21 PASS 3DH1 Ant1 2402 Reference 3.55 3.55 --- PASS 30~1000 3.55 -60.38 ≤-16.45 PASS 1000~26500 3.55 -47.23 ≤-16.45 PASS 2441 Reference 5.36 5.36 --- PASS 30~1000 5.36 -60.25 ≤-14.64 PASS 1000~26500 5.36 -47.46 ≤-14.64 PASS 2480 R…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID. ............................................ : GTS20230215017-1-8 2AQAA-EZPADM10SE Compiled by ( position+printed name+signature).. : File administrators Peter Xiao Supervised by ( position+printed name+signature).. : Test Engineer Jenny Zeng Approved by ( position+printed name+signature).. : Manager Jason Hu Date of issue ..................................... : Mar. 29, 2023 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong,China Applicant’s name ............................ : Shenzhen Jumper Technology Co.,Ltd Address ............................................ : Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Tablet Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Jumper Technology Co.,Ltd Model/Type reference ...................... : EZpad M10SE List Models ..................................... : N/A Modulation Type ............................... : GFSK,π/4-DQPSK,8-DPSK Operation Frequency ........................ : From 2402MHz to 2480MHz Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 3.8V by battery Recharged by DC 5.0V Result ............................................... : PASS Report No.: GTS20230215017-1-8 Page 2 of 38 T E S T R E P O R T Test Report No. : GTS20230215017-1-8 Mar. 29, 2023 ______________________________________________________________________________________________ Date of issue Equipment under Test : Tablet Model /Type : EZpad M10SE Listed model : N/A Applicant : Shenzhen Jumper Technology Co.,Ltd Address : Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen, China Manufacturer : Shenzhen Jumper Technology Co.,Ltd Address : Room B601, C601, JMD Industrial Park, No. 39 Qingfeng Blvd., Baolong Community, Baolong Street, Longgang District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20230215017-1-8 Page 3 of 38 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. EUT operation mode .............................................................................................................................. 6 2.6. Block Diagram of Test Setup ................................................................................................................. 7 2.7. Related Submittal(s) / Grant (s) ............................................................................................................. 7 2.8. EUT Exercise Software .......................................................................................................................... 7 2.9. Special Accessories ............................................................................................................................... 7 2.10. External I/O Cable ................................................................................................................................ 7 2.11. Modifications ........................................................................................................................................ 7 3. TEST ENVI…

Text truncated - open the document above for the full version.