2AQM6-SYNCScooter

HOLD FOR 2 SECONDS FCC statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC ID: 2AQM6-SYNC Page 1 of 3 Report No.: CTL2107282091-WF External Photos of EUT FCC ID: 2AQM6-SYNC Page 2 of 3 Report No.: CTL2107282091-WF FCC ID: 2AQM6-SYNC Page 3 of 3 Report No.: CTL2107282091-WF

FCC ID: 2AQM6-SYNC Page 1 of 1 Report No.: CTL2107282091-WF FCC-ID Label Information 1. Label location: Scooter Model: SYNC FCC ID: 2AQM6-SYNC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AQM6-SYNC Page 1 of 4 Report No.: CTL2107282091-WF Internal Photos of EUT Antenna FCC ID: 2AQM6-SYNC Page 2 of 4 Report No.: CTL2107282091-WF FCC ID: 2AQM6-SYNC Page 3 of 4 Report No.: CTL2107282091-WF FCC ID: 2AQM6-SYNC Page 4 of 4 Report No.: CTL2107282091-WF

version01 Jetson Electric Bikes LLC 86 34th Street 4th Floor Jetson Brooklyn New York United States 11232 Tel: 6464641557 Fax: 6464641557 Declaration concerning Antenna Specification It is hereby declared that the product Model No.: SYNC FCC ID: 2AQM6-SYNC fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for PCB antenna type(s) described below: Model No. of antenna: N/A Type of antenna: PCBAntenna Gain of the antenna: 0dBi Frequency range: 2402-2480 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Jetson Electric Bikes LLC Address: 86 34th Street 4th Floor Jetson Brooklyn New York United States 11232 City: New York ZIP / Postal code: Country: United States Place: Production Manager Date: 2021-08-09 Signature:

FCC ID: 2AQM6-SYNC Page 1 of 1 Report No.: CTL2107282091-WF RF Exposure Letter According to 447498 D01 General RF Exposure Guidance v05 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Pt = 3.54dBm=2.2594mW at 2441MHz So (2.2594mW/5mm)x√2.441GHz =0.7060<3 Then SAR evaluation is not required

V1.0Page1of42ReportNo.:CTL2107282091-WF Appendixfor15.247 1.Bandwidth 1.1TestResult TestModeFrequency(MHz)TXTypeANTNo. 20dBBandwidth Verdict TestResult (MHz) GFSK 2402SISO10.954PASS 2441SISO10.953PASS 2480SISO10.951PASS Pi/4DQPSK 2402SISO11.313PASS 2441SISO11.322PASS 2480SISO11.312PASS 8DPSK 2402SISO11.311PASS 2441SISO11.319PASS 2480SISO11.311PASS TestModeFrequency(MHz)TXTypeANTNo. 99%OccupiedBandwidth TestResult(MHz) GFSK 2402SISO10.854 OnlyforReport Use 2441SISO10.859 OnlyforReport Use 2480SISO10.860 OnlyforReport Use Pi/4DQPSK 2402SISO11.182 OnlyforReport Use 2441SISO11.185 OnlyforReport Use 2480SISO11.184 OnlyforReport Use 8DPSK 2402SISO11.184 OnlyforReport Use 2441SISO11.183 OnlyforReport Use 2480SISO11.182 OnlyforReport Use 1.2TestGraph-20dBBandwidth V1.0Page2of42ReportNo.:CTL2107282091-WF V1.0Page3of42ReportNo.:CTL2107282091-WF V1.0Page4of42ReportNo.:CTL2107282091-WF V1.0Page5of42ReportNo.:CTL2107282091-WF V1.0Page6of42ReportNo.:CTL2107282091-WF 1.3TestGraph-99%OccupiedBandwidth V1.0Page7of42ReportNo.:CTL2107282091-WF V1.0Page8of42ReportNo.:CTL2107282091-WF V1.0Page9of42ReportNo.:CTL2107282091-WF V1.0Page10of42ReportNo.:CTL2107282091-WF V1.0Page11of42ReportNo.:CTL2107282091-WF 2.MaximumConductedOutputPower 2.1TestResult TestModeFrequency(MHz)TxType MeasuredPeak OutputPower(dBm) Limits(dBm)Verdict Ant1 GFSK 2402SISO2.5130PASS 2441SISO2.8030PASS 2480SISO2.0230PASS Pi/4DQPSK 2402SISO3.2420.97PASS 2441SISO3.5420.97PASS 2480SISO2.7520.97PASS 8DPSK 2402SISO3.2220.97PASS 2441SISO3.5120.97PASS 2480SISO2.7420.97PASS 2.2TestGraph V1.0Page12of42ReportNo.:CTL2107282091-WF V1.0Page13of42ReportNo.:CTL2107282091-WF V1.0Page14of42ReportNo.:CTL2107282091-WF V1.0Page15of42ReportNo.:CTL2107282091-WF V1.0Page16of42ReportNo.:CTL2107282091-WF 3.Carrierfrequencyseparation 3.1TestResult TestModeTXTypeANTNo. Channel Separation(MHz) 20dBBandwidth (MHz) Limits(MHz)Verdict GFSKSISO11.2000.954≥0.954PASS Pi/4DQPSKSISO11.0001.322≥0.881PASS 8DPSKSISO11.2151.319≥0.879PASS 3.2TestGraph V1.0Page17of42ReportNo.:CTL2107282091-WF V1.0Page18of42ReportNo.:CTL2107282091-WF 4.Numberofhoppingfrequencies 4.1TestResult TestModeTXTypeANTNo. NumofHopping Frequencies LimitsVerdict GFSKSISO179≥15PASS Pi/4DQPSKSISO179≥15PASS 8DPSKSISO179≥15PASS 4.2TestGraph V1.0Page19of42ReportNo.:CTL2107282091-WF V1.0Page20of42ReportNo.:CTL2107282091-WF 5.TimeofOccupancy(DwellTime) 5.1TestResult TestMode Packet Type TXTypeANTNo. Durationof Single Pulse(ms) Obeservatio nPeriod(s) Numof Pulsein Observation Period DwellTime (ms) Limits(ms)Verdict GFSK DH1SISO10.37931.6315119.385≤400PASS DH3SISO11.63431.6162264.708≤400PASS DH5SISO12.88031.6110316.800≤400PASS Pi/4DQPSK 2DH1SISO10.38731.6320123.840≤400PASS 2DH3SISO11.64031.6162265.680≤400PASS 2DH5SISO12.88931.6105303.345≤400PASS 8DPSK 3DH1SISO10.38831.6320124.160≤400PASS 3DH3SISO11.64031.6162265.680≤400PASS 3DH5SISO12.88931.6100288.900≤400PASS 5.2TestGraph V1.0Page21of42ReportNo.:CTL2107282091-WF V1.0Page22of42ReportNo.:CTL2107282091-WF V1.0Page23of42ReportNo.:CTL2107282091-WF V1.0Page24of42ReportNo.:CTL2107282091-WF V1.0Page25of42ReportNo.:CTL2107282091-WF V1.0Page26of42ReportNo.:CTL2107282091-WF V1.0Page27of42ReportNo.:CTL2107282091-WF

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 E-mail: [email protected] TEST REPORT FCC PART 15.247 Report Reference No.: CTL2107282091-WF Compiled by: ( position+printed name+signature) Happy Guo (File administrators) Tested by: ( position+printed name+signature) Gray Gao (Test Engineer) Approved by: ( position+printed name+signature) Ivan Xie (Manager) Product Name ............................ : Scooter Model/Type reference ................ : SYNC List Model(s) ............................... : N/A Trade Mark .................................. : JETSON FCC ID ......................................... : 2AQM6-SYNC Applicant’s name ....................... : Jetson Electric Bikes LLC Address of applicant ................. : 86 34th Street 4th Floor Jetson Brooklyn New York United States 11232 Test Firm ..................................... : Shenzhen CTL Testing Technology Co., Ltd. Address of Test Firm ................. : Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 Test specification ....................... : Standard ...................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400-2483.5 MHz and 5725-5850 MHz. TRF Originator ............................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF .................................. : Dated 2011-01 Date of receipt of test item ........ : Jul. 29, 2021 Date of sampling ........................ : Jul. 29, 2021 Date of Test Date ........................ : Jul. 29, 2021-Aug. 05, 2021 Date of Issue .............................. : Aug. 06, 2021 Result .......................................... : Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. V1.0 Page 2 of 38 Report No.: CTL2107282091-WF TEST REPORT Test Report No. : CTL2107282091-WF Aug. 06, 2021 Date of issue Equipment under Test : Scooter Sample No : CTL210728209-1-S001 Model /Type : SYNC Listed Models : N/A Applicant : Jetson Electric Bikes LLC Address : 86 34th Street 4th Floor Jetson Brooklyn New York United States 11232 Manufacturer : Jiangsu Gopal Intelligent Technology Co., Ltd. Address : No.199 Guanjiang Rd, Xiangshui Economic Development Zone, XiangshuiCounty, Yancheng City, Jiangsu China Test result Pass * *In the configuration tested, the EUT complied with the standards specified page 5. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the issuing testing laboratory. V1.0 Page 3 of 38 Report No.: CTL2107282091-WF ** Modified History ** Revisions Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release 2021-08-06 CTL2107282091-WF Tracy Qi V1.0 Page 4 of 38 Report No.: CTL2107282091-WF Table of Contents Page 1. SUMMARY ............................................................................................................................................................... 5 1.1. TEST STANDARDS ..................................................................................................................................................... 5 1.2. TEST DESCRIPTION ........................................................................................................................................................ 5 1.3. TEST FACILITY .............................................................................................................................................................. 6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................................... 6 2. GENERAL INFORMATION .......................................................................................................................................... 8 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 8 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 8 2.3. DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 9 2.4. EQUIPMENTS USED DURING THE TEST ............................................................................................................................ 10 2.5. RELATED SUBMITTAL(S) / GRANT (S) .............................................................................................................................. 10 2.6. MODIFICATIONS ......................................................................................................................................................... 10 3. TEST CONDITIONS AND RESULTS ............................................................................................................................ 11 3.1. CONDUCTED EMISSIONS TEST ....................................................................................................................................... 11 3.2. RADIATED EMISSIONS AND BAND EDGE .......................................................................................................................... 15 3.3. MAXIMUM PEAK OUTPUT POWER ................................................................................................................................ 23 3.4. 20DB BANDWIDTH ....................................…

Text truncated - open the document above for the full version.

FCC ID: 2AQM6-SYNC Page 1 of 2 Report No.: CTL2107282091-WF Test Setup Photos of the EUT FCC ID: 2AQM6-SYNC Page 2 of 2 Report No.: CTL2107282091-WF