2AR2SAS700Wireless Speaker

English Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Important Safety Instructions • Make sure that the power supply voltage corresponds to the voltage of the unit. • The speaker shall not be exposed to dripping or splashing. • Do not place any source of danger on the speaker (e.g. liquid filled objects, lit candles). • Make sure that there is enough free space around the speaker for ventilation. • Please use the speaker safely in an environment with temperature between 0°C and 45°C. • Only use attachments and accessories specified by the manufacturer. Battery safety precautions • Danger of explosion if a battery is incorrectly replaced. Replace only with the same or equivalent type. • A battery (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • A battery in extreme high or low temperatures during use, storage or transportation, and low air pressure at high altitude can pose safety hazards. • Do not replace a battery with an incorrect type that can defeat a safeguard (for example, some lithium battery types). • Disposing a battery into fire or a hot oven, mechanically crushing or cutting a battery can result in an explosion. • Leaving a battery in an extremely high temperature surrounding, or an extremely low air pressure environment may result in an explosion or leakage of flammable liquid or gas. Warning • Never remove the casing of this speaker. • Never lubricate any part of this speaker. • Place this speaker on a flat, hard and stable surface. • Never place this speaker on other electrical equipment. • Only use this speaker indoors. Keep this speaker away from water, moisture and liquid-filled objects. • Keep this speaker away from direct sunlight, naked flames or heat. • Risk of explosion if a battery is replaced by an incorrect type. Care for your product Use only microfiber cloth to clean the product. Care of the environment Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol on a product means that the product is covered by European Directive 2012/19/EU. This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health. All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags and protective foam sheet). Your product consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding disposal of packaging materials, exhausted batteries and old equipment. Declaration of conformity This product complies with the radio interference requirements of the European community. Hereby, TP Vision Europe B.V. declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can find the Declaration of Conformity on https://aoc.com. Albanian (Shqip) Lexoni dhe kuptoni të gjitha udhëzimet përpara përdorimit të produktit tuaj. Garancia nuk gjen zbatim nëse dëmtimi shkaktohet nga mosndjekja e udhëzimeve. Siguria Udhëzime të rëndësishme sigurie • Sigurohuni që voltazhi i furnizimit me energji elektrike të përputhet me tensionin e njësisë. • Autoparlanti nuk duhet të ekspozohet ndaj rënies së pikave(pikimit) apo spërkatjes. • Mos vendosni asnjë burim që mund të përbëjë rrezik mbi autoparlantin (p.sh. objekte të mbushura me lëngje, qirinj të ndezur). • Sigurohuni që të ketë mjaftueshëm hapësirë të lirë për ventilim rreth autoparlantit. • Ju lutem përdorni autoparlantin në mënyrë të sigurt në një mjedis me temperaturë ndërmjet 0°C dhe 45°C. • Përdorni vetëm kapëse dhe pajisje shtesë të specifikuara nga prodhuesi. Masat paraprake për sigurinë e baterisë • Rrezik shpërthimi nëse bateria është zëvendësuar gabimisht. Zëvendësoni vetëm me të njëjtin lloj ose ekuivalent me të. • Bateria (paketa e baterisë ose bateritë e instaluara) nuk duhet të ekspozohen ndaj nxehtësisë së tepërt si rrezet e diellit, ndaj zjarrit ose të ngjashme me to. • Bateria në temperatura ekstremisht të larta ose të ulëta gjatë përdorimit, ruajtjes ose transportit si dhe nga presioni i ulët i ajrit në lartësi të madhe mund të krijojë rreziqe për sigurinë. • Shmagni zëvendësimin e bateri së me llojin e gabuar që mund të prishë mbrojtjen (për shembull, disa lloje baterish litiumi). • Hedhja e një baterie në zjarr ose në një furrë të nxehtë, ose shtypja ose prerja mekanike e një baterie, mund të rezultojë në një shpërthim. Information in this document is subject to change without any notice. @2023 AOC All Rights Reserved. Made in China Safety • Lënia e një baterie në një mjedis me temperaturë jashtëzakonisht të lartë ose në një mjedis me presion jashtëzakonisht të ulët ajri mund të rezultojë në një shpërthim ose rrjedhje të lëngut ose gazit të ndezshëm. Paralajmërim • Asnjëherë mos e hiqni veshjen mbështjellëse të këtij autoparlanti. • Asnjëherë mos lubrifikoni ndonjë pjesë të këtij autoparlanti. • Vendoseni këtë autoparlant në një sipërfaqe të sheshtë, të fortë dhe të qëndrueshme. • Asnjëherë mos e vendosni këtë autoparlant mbi pajisje të tjera elektrike. • Përdoreni këtë autoparlant vetëm në ambiente të brendshme. Mbajeni këtë autoparlant larg ujit, lagështisë dhe objekteve të mbushura me lëngje. • Mbajeni këtë autopar…

Text truncated - open the document above for the full version.

Form: RFT-AMER-TCB-OP-19o Revision: 1 Page 1 of 2 Date: 1/25/2023 [MMD Hong Kong Holding Limited] Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both [TPV-USA Corp ]Agentand [MMD Hong Kong Holding Limited] Aacknowledge consent to obligations of each party pursuant to 47 CFR part §2.911(d)(7) of the FCC rules in regard to the agent for service of process. I [Tomas Guan] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an a gent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name : MMD Hong Kong Holding Limited Contact Name : Tomas Guan Address : Units 1208-11,12th Floor,C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon,Hong Kong Telephone No : 86-755-36358341 Email : [email protected] Applicant FRN : 0028068138 Signature: ____________________________________ Date: ____________03/07/2023________________________ I [Gcoff Bostwick] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to all certification applications to the FCC submitted by above applicant and agree to immediately notify the FCC and Intertek if there is change in this representation. Agent Company Name Contact Name Address Telephone No Email Agent FRN Signature: ____________________________________ : TPV-USA Corp : Gcoff Bostwick : 6525 Carnegie Blvd., Suite #200 Charlotte, NC 28211 : 980-890-7523 : [email protected] ：0033543315 Form: RFT-AMER-TCB-OP-19o Revision: 1 Page 2 of 2 Date: 1/25/2023 Date: ____________________________________ 03/07/2023

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/25/2023 [MMD Hong Kong Holding Limited] Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: [MMD Hong Kong Holding Limited] FCC ID: [2AR2SAS700] To whom it may concern, [MMD Hong Kong Holding Limited] (“Applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant [ is not] identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. ______________________________ [Signature of authorized Proprietor, Partner or Authorized Officer] [Tomas Guan] [Manager] [MMD Hong Kong Holding Limited] [March 14, 2023]

Authority to Act as Agent [January 01, 2023] Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement (MMD Hong Kong Holding Limited) To Whom It May Concern: We, (MMD Hong Kong Holding Limited), hereby authorized Shenzhen UnionTrust Quality and Technology Co., Ltd. to act as our Agent for the purpose of preparing application all applicable parts of the FCC rules and regulations. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 36 months By: __________________________ Tomas Guan (Signature 1 ) (Print name) Title: Manager On behalf of: (MMD Hong Kong Holding Limited) Telephone: 86-755-36358341 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

[MMD Hong Kong Holding Limited] [March 01, 2023] Attention: Application Examiner RE: Request for Confidentiality Applicant: [MMD Hong Kong Holding Limited] FCC ID: [2AR2SAS700] To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by [MMD Hong Kong Holding Limited] to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Schematics  Detailed Block Diagrams  Detailed Operational/Functional Description Rationale for request for confidentiality: [MMD Hong Kong Holding Limited] has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] [Tomas Guan] [ Manager] [MMD Hong Kong Holding Limited] 1(1)

Page 1 of 3 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 3 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 3 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

2023-1-9 V 0.3 AS700 AS700 5.86 mm7 mm5.01mm 7.07 mm 5 mm 5.01 mm Silk screen transparent UV ,glossy TP Vision Europe B.V.Prins Bernhardplein 200, 1097 JB Amsterdam The Netherlands Made in China Wireless Speaker Model: AS700 Ref no.: AS700W/00 Input: 5V 3.0A 9V 3.0A 15V 2.0A Output: 5V 2.0A FCC ID: 2AR2SAS700 IC: 24589-AS700 Battery Capacity:7.4V 10400mAh 76.96Wh TP Vision Europe B.V. Prins Bernhardplein 200, 1097 JB Amsterdam The Netherlands Made in China Wireless Speaker Model: AS700 Ref no.: AS700W/00 Input: 5V 3.0A 9V 3.0A 15V 2.0A Output: 5V 2.0A FCC ID: 2AR2SAS700 IC: 24589-AS700 Battery Capacity:7.4V 10400mAh 76.96Wh TP Vision Europe B.V. Prins Bernhardplein 200, 1097 JB Amsterdam The Netherlands Made in China Wireless Speaker Model: AS700 Ref no.: AS700B/00 Input: 5V 3.0A 9V 3.0A 15V 2.0A Output: 5V 2.0A FCC ID: 2AR2SAS700 IC: 24589-AS700 Battery Capacity:7.4V 10400mAh 76.96Wh TP Vision Europe B.V. Prins Bernhardplein 200, 1097 JB Amsterdam The Netherlands Made in China Wireless Speaker Model: AS700 Ref no.: AS700U/00 Input: 5V 3.0A 9V 3.0A 15V 2.0A Output: 5V 2.0A FCC ID: 2AR2SAS700 IC: 24589-AS700 Battery Capacity:7.4V 10400mAh 76.96Wh TP Vision Europe B.V.Prins Bernhardplein 200, 1097 JB Amsterdam The Netherlands Made in China Wireless Speaker Model: AS700 Ref no.: AS700B/00 Input: 5V 3.0A 9V 3.0A 15V 2.0A Output: 5V 2.0A FCC ID: 2AR2SAS700 IC: 24589-AS700 Battery Capacity:7.4V 10400mAh 76.96Wh TP Vision Europe B.V.Prins Bernhardplein 200, 1097 JB Amsterdam The Netherlands Made in China Wireless Speaker Model: AS700 Ref no.: AS700U/00 Input: 5V 3.0A 9V 3.0A 15V 2.0A Output: 5V 2.0A FCC ID: 2AR2SAS700 IC: 24589-AS700 Battery Capacity:7.4V 10400mAh 76.96Wh AS700W/00(White) AS700B/00(Black) AS700U/00(Blue) AS700W/00(White) AS700U/00(Blue) AS700B/00(Black) 5.01 mm 13.98 mm

Page 1 of 7 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 7 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 7 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo Page 4 of 7 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 7 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 7 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo EUT Photo Page 7 of 7 FCC ID: 2AR2SAS700 IC: 24589-AS700 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo

Page 1 of 9 Report No.:2212293515RFC-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 SAR TEST EXCLUSION EVALUATION REPORT Product Name: Wireless Speaker Trade Mark: AOC Model No./HVIN: AS700W/00 Add. Model No.: AS700B/00,A2,AS700U/00, AS700x/yy(x=A-Z or NiL , yy=00-99 or NiL for country code) Report Number: 2212293515RFC-2 Test Standards: FCC 47 CFR Part 2.1093 RSS-102 Issue 5 FCC ID: 2AR2SAS700 IC: 24589-AS700 Test Result: PASS Date of Issue: March 23, 2023 Prepared for: MMD Hong Kong Holding Limited Units 1208-11,12th Floor,C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon,Hong Kong Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Approved by: Date: March 23, 2023 Kevin Liang Assistant Manager Page 2 of 9 Report No.:2212293515RFC-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 Version Version No. Date Description V1.0 March 23, 2023 Original Page 3 of 9 Report No.:2212293515RFC-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 5 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 5 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 5 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 2. EQUIPMENT LIST .................................................................................................................................................... 6 3. SAR TEST EXCLUSION EVALUATION ................................................................................................................... 6 3.1 REFERENCE DOCUMENTS FOR EVALUATION ........................................................................................................ 6 3.2 EXEMPTION LIMITS FOR ROUTINE EVALUATION – SAR EVALUATION .................................................................... 6 3.2.1 SAR TEST EXCLUSION THRESHOLD ........................................................................................................ 6 3.2.2 TEST PROCEDURE ................................................................................................................................. 8 3.3 MPE CALCULATION RESULTS ............................................................................................................................ 8 3.3.1 FOR BT ................................................................................................................................................. 8 APPENDIX 1 PHOTOS OF TEST SETUP ....................................................................................................................... 9 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................... 9 Page 4 of 9 Report No.:2212293515RFC-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: MMD Hong Kong Holding Limited Address of Applicant: Units 1208-11,12th Floor,C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon,Hong Kong Manufacturer: MMD Hong Kong Holding Limited Address of Manufacturer: Units 1208-11,12th Floor,C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon,Hong Kong 1.2 EUT INFORMATION Product Name: Wireless Speaker Model No. /HVIN: AS700W/00 Add. Model No.: AS700B/00,A2,AS700U/00, AS700x/yy(x=A-Z or NiL , yy=00-99 or NiL for country code) Trade Mark: AOC DUT Stage: Production Unit EUT Supports Function: (Provided by the customer) 2.4 GHz ISM Band: Bluetooth 5.3(Only support BR+EDR) Software Version: 0.1(Provided by the customer) Hardware Version: 0.3(Provided by the customer) Note: The additional model AS700B/00,A2,AS700U/…

Text truncated - open the document above for the full version.

Page 1 of 48 Report No.: 2212293515RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 TEST REPORT Product Name: Wireless Speaker Trade Mark: AOC Model No. / HVIN: AS700W/00 Add. Model No: AS700B/00,A2,AS700U/00, AS700x/yy(x=A-Z or NiL , yy=00-99 or NiL for country code) Report Number: 2212293515RFC-1 Test Standards: FCC 47 CFR Part 15 Subpart C RSS-247 Issue 2 RSS-Gen Issue 5 FCC ID: 2AR2SAS700 IC: 24589-AS700 Test Result: PASS Date of Issue: March 23, 2023 Prepared for: MMD Hong Kong Holding Limited Units 1208-11,12th Floor,C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon,Hong Kong Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Approved by: Date: March 23, 2023 Kevin Liang Assistant Manager Page 2 of 48 Report No.: 2212293515RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 Version Version No. Date Description V1.0 March 23, 2023 Original Page 3 of 48 Report No.: 2212293515RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES ............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.6 TEST LOCATION ................................................................................................................................................. 6 1.7 TEST FACILITY................................................................................................................................................... 6 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 6 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 6 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 7 2. TEST SUMMARY ...................................................................................................................................................... 8 3. EQUIPMENT LIST .................................................................................................................................................... 9 4. TEST CONFIGURATION ........................................................................................................................................ 10 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ...................................................................................................... 10 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................. 10 4.1.2 RECORD OF NORMAL ENVIRONMENT AND TEST SAMPLE ........................................................................ 10 4.2 TEST CHANNELS ............................................................................................................................................. 10 4.3 EUT TEST STATUS .......................................................................................................................................... 10 4.4 PRE-SCAN .................................................................................................................................................... 11 4.4.1 PRE-SCAN UNDER ALL PACKETS AT MIDDLE CHANNEL .............................................................................. 11 4.4.2 WORST-CASE DATA PACKETS ................................................................................................................ 11 4.4.3 TESTED CHANNEL DETAIL ...................................................................................................................... 11 4.5 TEST SETUP ......................................…

Text truncated - open the document above for the full version.

Page 34 of 48 Report No.: 2212293515RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: …

Text truncated - open the document above for the full version.