2AR2SL3Wireless over-ear headphones

L 2h 03"03" R L x1x1 01" RR R x1 R x1 Headphones Fidelio L3 www.philips.com/welcome English: Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Canada: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) IC Radiation Exposure Statement: This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 0mm between the radiator and your body. French: Avis de conformité Cet appareil satisfait aux règlements de la FCC partie 15 du Code of Federal Regulations. Son fonctionnement est assujetti aux deux conditions suivantes : 1. Cet appareil ne doit pas causer d’interférence préjudiciable et 2. l’appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un fonctionnement non désiré. Règlement de la FCC Cet équipement a été testé et jugé compatible avec les limites s’appliquant aux appareils numériques de la classe B, conformément à l’article 15 du règlement de la FCC. Ces limites ont été définies pour fournir une protection raisonnable contre les interférences nuisibles dans le cadre d’une installation résidentielle. Cet équipement génère, utilise et peut émettre de l’énergie radiofréquence et, s’il n’est pas installé ni utilisé conformément aux instructions, peut causer des interférences gênantes pour les communications radio. Rien ne garantit toutefois que des interférences ne surviendront pas dans une installation particulière. Si cet équipement cause des interférences nuisibles pour la réception de la radio ou de la télévision, ce qui peut être déterminé en mettant l’équipement hors tension puis sous tension, l’utilisateur devra essayer de corriger ces interférences en effectuant une ou plusieurs des opérations suivantes : • Déplacez l’antenne de réception. • Augmentez la distance entre l’équipement et le récepteur. • Branchez l’équipement à une prise d’un circuit autre que celui sur lequel le récepteur est branché. • Consultez le détaillant ou un technicien de radiotélévision expérimenté. Canada: L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B) Déclaration d’IC sur l’exposition aux radiations: Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 0mm entre le radiateur et votre corps. 10 FCC ID: 2AR2SL3 IC: 24589-L3 Full user manual in all languages available on: | Manuel d'utilisation complet dans toutes les langues disponibles sur: | Manual completo de usuario disponible en todos los idiomas en: | Die vollständige Bedienungsanleitung ist in allen Sprachen verfügbar unter: | Manuale dell’utente completo in tutte le lingue disponibile su: | Manual do utilizador completo em todos os idiomas, disponível em: | Volledige gebruikershandleiding in alle talen beschikbaar op: | Полное руководство пользователя на всех языках доступно по ссылке: | Барлыԕ тілдердегі толыԕ нԝсԕаулыԕты мына жерден алуԑа болады: | | 鲙넁ꩡ넩뱭꾅꫑ꑝ麕 꽭꽩ꈑ鷑놹뙩ꩡ끞녅꫙ꐺ꫑ꌱ쀊넭뼍겙ꯍ넽걪鱽鲙 | ࠲ηڷՁࡋ۶嫻঺أ णئ➫Ϋ㤒˓| ϸ˓ئء࠲ڷՁࡋ܀߿۶৙঺أκڇ΋̺ऒࢭ www.philips.com/support P.1 P. 3P. 2 P. 4 QSG (180 x 180 mm) 05" ON Philips Fidelio L3 L R 237819 121011 456 R R R R R R R 12 12 P.1 P. 3P. 2 P. 4 Safety (180 x 180 mm) ITALIANO / ITALIAN Gentile Cliente, Grazie per avere scelto questo prodotto Philips. Per quanto concerne la garanzia Philips applicabile a questo prodotto, Le con…

Text truncated - open the document above for the full version.

User manual Register your product and get support at www.philips.com/support Headphones Fidelio L3 1 Important safety instructions 2 Hearing Safety 2 General information 2 2 Your Bluetooth over-ear headphones 3 What's in the box 3 Other devices 3 Overview of your Bluetooth wireless headset 4 3 Get started 5 Charge the battery 5 Pair the headphones with your mobile phone 5 4 Use your headphones 6 Connect the headphones to a Bluetooth device 6 Manage your calls and music 6 5 Technical data 8 6 Notice 9 Declaration of conformity 9 Disposal of your old product and battery 9 Remove the integrated battery 9 Compliance with EMF 9 Environmental information 10 Notice of compliance 10 7 Trademarks 11 8 Frequently asked questions 12 Contents 1 Important safety instructions Hearing Safety  To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guide- lines when using your headset. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you can't hear what's around you. • You should use caution or tempo- rarily discontinue use in potentially hazardous situations. • Excessive sound pressure from earphones and headphones can cause hearing loss. • Using headphones with both ears covered while driving is not recom- mended and may be illegal in some areas while driving. • For your safety, avoid distractions from music or phone calls while in trac or other potentially dangerous environments. General information To avoid damage or malfunction:  Do not expose headphones to excessive heat  Do not drop your headphones.  Headphones shall not be exposed to dripping or splashing.  Do not allow your headphones to be submerged in water.  Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.  If cleaning is required use a soft doth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.  The integrated battery shall not be exposed to excessive heat such as sunshine, re or the like.  Replacement of a battery with an incorrect type that can defeat a safeguard;  Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;  Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ammable liquid or gas;  A battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas.  Never use your headphones when you are operating a motor vehicle, riding a bicycl e, running or walking in trac areas. It is dangerous and illegal in many places. About operating and storage temperatures and humidity • Operating temperature: 0°C (32°F) to 40°C (104°F) • Storage temperature: -10°C (14°F) to 45°C (113°F) • Operating humidity: 8% - 90% RH (No condensation) • Storage humidity: 5% - 90% RH (No condensation) • Maximum operating altitude: 3000m • Battery life may be shorter in high or low temperature conditions. Danger Caution 2 Your Bluetooth over-ear headphones What's in the box Philips Bluetooth over-ear headphones Philips Fidelio L3 Quick start guide Other devices A mobile phone or device (e.g. note- book, PAD, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headset (see 'Technical data' on page 8). Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips oers, register your product at www.philips.com/welcome. With this Philips over-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music; • enjoy noise cancelation. Plane Adaptor Carrying case USB charging cable (for charging only) Audio cable Global Warranty Safety leaet Overview of your Bluetooth wireless headset Micro charging slot Voice Assistant Touch Control Panel LED indicator ANC/Awareness mode button (Power button) Audio jack 1 2 3 4 5 6 7 Microphone 8 2 1 3 7 8 4 5 6 3 Get started Charge the battery Charging case Note  Before you use your headset for the rst time, place the headsets in the charging case and charge the battery for 2 hours for optimum battery capacity and lifetime.  Use only the original USB charging cable to avoid any damage.  Finish your call before charging the headset, as connecting the headset for charging will power the headset o. Connect the supplied USB charging cable to: • The USB type C charging slot on the headphones and; • The charger/USB port of a computer. Tip  Normally, a full charge takes 2 hours. Pair the headphones with your mobile phone Make sure that the headphones are fully charged and turned o. Make sure that the mobile phone is turned on and its Bluetooth feature is activated. The headphone remain in pairing mode for 2 minutes. Before you use the headphones with your mobile phone for the rst time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headphones and mobile phone. The headphones store the last 8 devices in the memory. If you try to pair more than 8 devices, the earliest paired device is replaced by the new one. The following example shows you how to pair the headphones with your mobile phone. LED turns white during charging and turns o when the headphones in fully charged. Press and hold for 5 seconds until the blue and white LED ashes alternately. Philips Fidelio L3 Pair the headphones with the mobile phone. For detailed infor- mation, refer to the user manual of your mobile phone. Activate the Bluetooth feature of your mobile phone, select Philips Fidelio L3 Wired Connection Note  When streaming audio from Device 1, receiving a call from Device 2 will au…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: MMD Hong Kong Holding Limited Address: Units 1006-1007, 10th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon City: Hong Kong Country: China Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Wireless over-ear headphones Type designation: L3, L3xx/yy (xx=AA-ZZ or blank denoted different color; yy=00-99 denoted different country destination) Trademark: PHILIPS FCC ID : 2AR2SL3 on our behalf. Date: 2020-09-30 City: Hong Kong Name: Tomas Guan Function: Safety & Approbation Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: MMD Hong Kong Holding Limited Address : Units 1006-1007, 10th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon City: Hong Kong Country: China To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AR2SL3 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2020-09-30 Name and signature of applicant: Tomas Guan Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Model Declaration Letter We, the undersigning company Company Name: MMD Hong Kong Holding Limited Address: Units 1006-1007, 10th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, HongKong Hereby confirm that the following products: Product description: Wireless over-ear headphones Type designation: L3, L3xx/yy (xx=AA-ZZ or blank denoted different color; yy=00-99 denoted different country destination) Trademark: PHILIPS That all versions of the Model L3 and L3xx/yy are electrically equal except the following difference: 1. The model L3 and L3xx/yy are only differ in model name to distinguish between different markets. Date: 2020-09-30 Name: Tomas Telephone: 86-755-36358341 E-mail: [email protected] Signature:

Report No.: 2009C019 Page 2 of 19 Report No.: 2009C019 Page 3 of 19 Report No.: 2009C019 Page 4 of 19 Report No.: 2009C019 Page 5 of 19 Report No.: 2009C019 Page 6 of 19 Report No.: 2009C019 Page 7 of 19

V0.8 2020.09.25 Silk screen PANTONE 423C Silkscreen on plastic PANTONE COOLGRAY 9C S/N print on transparent PVC Black word EU/US version China/APAC version High glossy black Refer to X3 Silk screen PANTONE PANTONE 419C

Report No.: 2009C019 Page 8 of 19 Report No.: 2009C019 Page 9 of 19 Report No.: 2009C019 Page 10 of 19 Report No.: 2009C019 Page 11 of 19 Report No.: 2009C019 Page 12 of 19 Report No.: 2009C019 Page 13 of 19

Report No.: 2009C019 Page 14 of 19 Report No.: 2009C019 Page 15 of 19 Report No.: 2009C019 Page 16 of 19 Report No.: 2009C019 Page 17 of 19 Report No.: 2009C019 Page 18 of 19 Report No.: 2009C019 Page 19 of 19

Report No.: BTL-FCCP-3-2009C019 Page 1 of 4 FCC RF EXPOSURE REPORT FCC ID: 2AR2SL3 Project No. : 2009C019 Equipment : Wireless over-ear headphones Brand Name : PHILIPS or Test Model : L3 Series Model : L3xx/yy (xx=AA-ZZ or blank denoted different color; yy=00-99 denoted different country destination) Applicant : MMD Hong Kong Holding Limited Address : Units 1006-1007, 10th Floor, C-Bons International Center,108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Manufacturer : MMD Hong Kong Holding Limited Address : Units 1006-1007, 10th Floor, C-Bons International Center,108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Factory : DONGGUAN DONGCHENG TYMPHANY ACOUSTIC TECHNOLOGY CO.,LTD. Address : 1# No.27, Da Yuan Road, Zhang Cun, Dong Cheng, Dongguan City, Guangdong Province, China 2# Liuwu Sect., Sanheng Road, Xincheng District, ShekKit Town, Dongguan City, Guangdong Province, P.R. China Date of Receipt : Sep. 03, 2020 Date of Test : Sep. 03, 2020 ~ Sep. 27, 2020 Issued Date : Oct. 20, 2020 Report Version : R00 Test Sample : Engineering Sample No.:DG2020091740 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & KDB447498 D01 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Vincent Tan Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Te l : +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-3-2009C019 Page 2 of 4 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Oct. 20, 2020 Report No.: BTL-FCCP-3-2009C019 Page 3 of 4 1. TEST FACILITY The test facilities used to collect the test data in this report is at the location of No.3,Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. BTL's Test Firm Registration Number for FCC: 357015 BTL's Designation Number for FCC: CN1240 2. GENERAL CONCULUSION According to FCC KDB447498 D01, Appendix A, SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Appendix A - SAR Test Exclusion Thresholds for 100 MHz - 6 GHz and < 50 mm MHz 5 10 15 20 25 30 35 40 45 50 mm 150 39 77 116 155 194 232 271 310 349 387 SAR Test Exclusion Thresholds (mW) 300 27 55 82 110 137 164 192 219 246 274 450 22 45 67 89 112 134 157 179 201 224 835 16 33 49 66 82 98 115 131 148 164 900 16 32 47 63 79 95 111 126 142 158 1500 12 24 37 49 61 73 86 98 110 122 1900 11 22 33 44 54 65 76 87 98 109 2450 10 19 29 38 48 57 67 77 86 96 3600 8 16 24 32 40 47 55 63 71 79 5200 7 13 20 26 33 39 46 53 59 66 5400 6 13 19 26 32 39 45 52 58 65 5800 6 12 19 25 31 37 44 50 56 62 Report No.: BTL-FCCP-3-2009C019 Page 4 of 4 3. TABLE FOR FILED ANTENNA Ant. Manufacturer P/N Antenna Type Connector Gain (dBi) 1 INPAQ TECHNOLOGY CO., LTD. WAG-F- LA-00-136 FPC N/A 0.61 4. TEST RESULTS Tune up tolerance (dBm) BT LE ≤9.5 ≤9.0 F o r B T: Max. Output Power (dBm) Max. Output Power (mW) Limit (mW) 9.5 8.91 10 For LE: Max. Output Power (dBm) Max. Output Power (mW) Limit (mW) 9.0 7.94 10 Note: (1) Output power including tune up tolerance. (2) The maximum measured output peak power of this EUT is 8.91mW, less than 10mW at 5mm distance. Conclusion: No SAR evaluation required since transmitter power is below FCC threshold. End of Test Report

Report No.: BTL-FCCP-2-2009C019 Page 1 of 78 FCC Radio Test Report FCC ID: 2AR2SL3 This report concerns: Original Grant Project No. : 2009C019 Equipment : Wireless over-ear headphones Brand Name : PHILIPS or Test Model : L3 Series Model : L3xx/yy (xx=AA-ZZ or blank denoted different color; yy=00-99 denoted different country destination) Applicant : MMD Hong Kong Holding Limited Address : Units 1006-1007, 10th Floor, C-Bons International Center,108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Manufacturer : MMD Hong Kong Holding Limited Address : Units 1006-1007, 10th Floor, C-Bons International Center,108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Factory : DONGGUAN DONGCHENG TYMPHANY ACOUSTIC TECHNOLOGY CO.,LTD. Address : 1# No.27, Da Yuan Road, Zhang Cun, Dong Cheng, Dongguan City, Guangdong Province, China 2# Liuwu Sect., Sanheng Road, Xincheng District, ShekKit Town, Dongguan City, Guangdong Province, P.R. China Date of Receipt : Sep. 03, 2020 Date of Test : Sep. 03, 2020 ~ Sep. 27, 2020 Issued Date : Oct. 20, 2020 Report Version : R00 Test Sample : Engineering Sample No.:DG2020091740 for conducted, DG2020091741 for radiated. Standard(s) : FCC Part15, Subpart C (15.247) ANSI C63.10-2013 FCC KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Vincent Tan Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Te l : +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-2-2009C019 Page 2 of 78 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2009C019 Page 3 of 78 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 9 2 . GENERAL INFORMATION 10 2.1 GENERAL DESCRIPTION OF EUT 10 2.2 DESCRIPTION OF TEST MODES 12 2.3 PARAMETERS OF TEST SOFTWARE 13 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 2.5 SUPPORT UNITS 14 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 EUT OPERATING CONDITIONS 16 3.6 TEST RESULTS 16 4 . RADIATED EMISSION TEST 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 18 4.4 TEST SETUP 19 4.5 EUT OPERATING CONDITIONS 20 4.6 TEST RESULT - 9 KHZ TO 30 MHZ 20 4.7 TEST RESULT - 30 MHZ TO 1000 MHZ 20 4.8 TEST RESULT - ABOVE 1000 MHZ 20 5 . BANDWIDTH TEST 21 5.1 LIMIT 21 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM STANDARD 21 5.4 TEST SETUP 21 Report No.: BTL-FCCP-2-2009C019 Page 4 of 78 Table of Contents Page 5.5 EUT OPERATION CONDITIONS 21 5.6 TEST RESULTS 21 6 . MAXIMUM OUTPUT POWER 22 6.1 LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 . CONDUCTED SPURIOUS EMISSION 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATION CONDITIONS 23 7.6 TEST RESULTS 23 8 . POWER SPECTRAL DENSITY TEST 24 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 . MEASUREMENT INSTRUMENTS LIST 25 10 . EUT TEST PHOTO 27 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 31 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 34 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 39 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 42 APPENDIX E - BANDWIDTH 67 APPENDIX F - MAXIMUM OUTPUT POWER 70 Report No.: BTL-FCCP-2-2009C019 Page 5 of 78 Table of Contents Page APPENDIX G - CONDUCTED SPURIOUS EMISSION 72 APPENDIX H - POWER SPECTRAL DENSITY 77 Report No.: BTL-FCCP-2-2009C019 Page 6 of 78 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Oct. 20, 2020 Report No.: BTL-FCCP-2-2009C019 Page 7 of 78 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.247) Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Co…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2009C019 Page 29 of 87 12. EUT TEST PHOTO AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-1-2009C019 Page 30 of 87 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-1-2009C019 Page 31 of 87 Radiated Emissions Test Photos 30 MHz to 1000 MHz Report No.: BTL-FCCP-1-2009C019 Page 32 of 87 Radiated Emissions Test Photos Above 1 GHz