2AR2SPDS20Outdoor Speaker

Read and underst and all instructions bef or e you use your speaker . If d amage is caused by f ailure to follow instructions, the warranty does not apply. Be sure to include all documents when passing this product on to others. Keep these instructions for use for future ref er ence. Safety Important safety instructions – Make sure that the power supply vol tage cor responds to the vol tage of the unit. – The speaker shall not be exposed to dripping or splashing. – lit candles). – Make sure that there is enough free space around the speaker f or ventil ation. – Please use the speaker s af ely in an environment with temperature between 0°C and 45°C. – Battery s afety precautions – Danger o f e xplosion if a batter y is incor rectly r eplaced. Replace only with the same or e quivalent type. – A b atter y ( batter y p ack or b atter y installed) shall not be exposed to – A b atter y in extr eme high or low temperatures during use, storage or transpor tation, and low air pressure at high altitude can pose saf ety hazards. – Do not r eplace a batter y with an incor rect type that can defeat a saf eguard (for e xample, some lithium batter y t ypes). – cutting a batter y c an result in an explosion. – Leaving a batter y in an extr emely high temperature surrounding, or an extr emely low air pressure environment may r esult in an explosion o Warning – Never leave children unsuper vised with the packaging material. The underestimate dangers. – Always keep children and pets away f rom the product. – Never r emove the casing of this speaker . – Never lubricate any p ar t of this speaker . – – Never place this speaker on other electrical equipment. – – – Risk of e xplosion if a batter y is replaced by an incor rect type. Care for your product Care of the environment Disposal of your old product and batter y Notes on charging the built-in lithium battery Please note that your device contains built-in lithium batteries. The charging capacity of lithium batteries will decrease over time due to their self-discharge characteristics. To ensure the longevity of your device's battery, we recommend charging the built-in lithium battery to around 50% every 6 months when the device is not in use. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol on a product means that the product is cover ed by Eur opean Dir ect iv e 2012/19/EU. This symbol means that the product contains batteries cover ed by Eur opean Dir ect iv e 2013/56/EU which cannot be disposed of with normal household waste. Inf orm yourself about the local separate collect ion syst em for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Cor rect disposal of old products and batteries helps prevent negativ e consequences for the environment and human heal th . Charge the speaker Connect the supplied USB char ging cable to the char ging por t of the speaker and the USB wall outlet (5V 2A). Warning: If you are not going to use the speaker f or a long time, turn it o and be sure to unplug its USB char ging cable from the power outlet. Charging indicator status Power indicator Power o state Charging: Blinks red three times then solid red Fully char ged Power on state Charging: Blinks red and white alternately Fully char ged: Solid White Power supply ( built-in battery) This speaker c omes with a built-in rechar geable batter y. The power indicator will blink in red when in low battery case both in standby and power on state. If the batter y level is less than 10%, Speaker INPUT 5V 2A Press and hold for 3 seconds to turn the unit on, the power indicator turns to solid whit and a prompt tone "power on" is heard. Pr ess and hold for 3 seconds to turn the unit o , all indicat Change language of prompt tone In “p ower on” mode, press and hold and simultaneously f or 3 The speaker turns o automatic ally if: – the speaker does not play in Bluetooth mode or no Bluetooth device is connect ed in 15 minutes. seconds to switch the language of prompt tone between Chinese and English. USER MANUAL Siz e: 400mm x 224mm All unnecessar y p ackaging has been omitted. We have tried to make the packaging easy t o separate into three materials: car dboar d (box), polyst yrene foam (buffer ) and polyeth ylene (bags and protect iv e foam sheet). Your product consists of materials which can be recycled and reused if disassembled by a speci alized company. Please observe the local regulations regarding disposal of p ackaging materials, exhausted batteries and old equipment. Decl aration of c onformity This product complies with the radio inter fer ence requirements of the Eur opean community. Her eby, TP Vision Europe B.V. decl ar es that the pr oduct is in compliance with the essential requirements and other relevant provisions of RED Dir ect iv e 2014/53/EU and UK Radio E of Conformity on www.p or sche-design.c om. O n/O button Press and hold to turn the unit on and o Microphone hole Bluetooth button Press and hold to connect or disconnect Bluetooth device Ster eo Pairing button ( Volume) key Decr ease the volume Pl ay/Pause key; Previous/Next track in Bluetooth mode. ( Volume) key Increase the volume USB-C char ging por t Bluetooth/Power and Battery Low/Ster eo Pairing indicator Product overview What’s in the box SpeakerSilicon RingUSB char ging cable Quick star t guide Global warrantySaf ety instructions The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Connect the speaker t o your Bluetooth device – Press and hold f or 3 seconds to turn on the speaker , the speaker automatic ally enter s Bluetooth mode, and the Bluetooth indicator blinks white slowly. On the Bluetooth device, turn on Bluetooth , sear ch for and selec…

Text truncated - open the document above for the full version.

INPUT 5V 2A PDS20_00 QSG_V1.0 1 2 1 2 2 A 文 Porsche Design PDS20 Bluetooth ON Bluetooth Devices 20 m 1 12 1 2 2 3 AA & QUICK START GUIDE Outdoor Speaker PDS20 3 Sec. 3 Sec. 3 Sec. 3 Sec. 3 Sec. Quick start guide Warranty card 3 Sec. 3 Sec. BB 3 Sec. B QUICK START GUIDE Size: 320mm x 224mm A

SAFETY English Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Important Safety Instructions • Make sure that the power supply voltage corresponds to the voltage of the unit. • The speaker shall not be exposed to dripping or splashing. • Do not place any source of danger on the speaker (e.g. liquid filled objects, lit candles). • Make sure that there is enough free space around the speaker for ventilation. • Please use the speaker safely in an environment with temperature between 0°C and 45°C. • Only use attachments and accessories specified by the manufacturer. Battery safety precautions • Danger of explosion if a battery is incorrectly replaced. Replace only with the same or equivalent type. • A battery (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • A battery in extreme high or low temperatures during use, storage or transportation, and low air pressure at high altitude can pose safety hazards. • Do not replace a battery with an incorrect type that can defeat a safeguard (for example, some lithium battery types). • Disposing a battery into fire or a hot oven, mechanically crushing or cutting a battery can result in an explosion. • Leaving a battery in an extremely high temperature surrounding, or an extremely low air pressure environment may result in an explosion or leakage of flammable liquid or gas. Warning • Never remove the casing of this speaker. • Never lubricate any part of this speaker. • Place this speaker on a flat, hard and stable surface. • Never place this speaker on other electrical equipment. • Only use this speaker indoors. Keep this speaker away from water, moisture and liquid-filled objects. • Keep this speaker away from direct sunlight, naked flames or heat. • Risk of explosion if a battery is replaced by an incorrect type. • To avoid risk of fire, the equipment is supplied only by external power source which output shall comply with PS1 (with output capacity less than 15W). Care for your product • Use only microfiber cloth to clean the product. • Please note that your device contains built-in lithium batteries. The charging capacity of lithium batteries will decrease over time due to their self-discharge characteristics. To ensure the longevity of your device's battery, we recommend charging the built-in lithium battery to around 50% every 6 months when the device is not in use. Care of the environment Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol on a product means that the product is covered by European Directive 2012/19/EU. This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health. All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags and protective foam sheet). Your product consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding disposal of packaging materials, exhausted batteries and old equipment. Declaration of conformity This product complies with the radio interference requirements of the European community. Hereby, TP Vision Europe B.V. declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can find the Declaration of Conformity on www.porsche-design.com. Albanian (Shqip) Lexoni dhe kuptoni të gjitha udhëzimet përpara përdorimit të produktit tuaj. Garancia nuk gjen zbatim nëse dëmtimi shkaktohet nga mosndjekja e udhëzimeve. Siguria Udhëzime të rëndësishme sigurie • Sigurohuni që voltazhi i furnizimit me energji elektrike të përputhet me tensionin e njësisë. • Autoparlanti nuk duhet të ekspozohet ndaj rënies së pikave(pikimit) apo spërkatjes. • Mos vendosni asnjë burim që mund të përbëjë rrezik mbi autoparlantin (p.sh. objekte të mbushura me lëngje, qirinj të ndezur). • Sigurohuni që të ketë mjaftueshëm hapësirë të lirë për ventilim rreth autoparlantit. • Ju lutem përdorni autoparlantin në mënyrë të sigurt në një mjedis me temperaturë ndërmjet 0°C dhe 45°C. • Përdorni vetëm kapëse dhe pajisje shtesë të specifikuara nga prodhuesi. Masat paraprake për sigurinë e baterisë • Rrezik shpërthimi nëse bateria është zëvendësuar gabimisht. Zëvendësoni vetëm me të njëjtin lloj ose ekuivalent me të. • Bateria (paketa e baterisë ose bateritë e instaluara) nuk duhet të ekspozohen ndaj nxehtësisë së tepërt si rrezet e diellit, ndaj zjarrit ose të ngjashme me to. • Bateria në temperatura ekstremisht të larta ose të ulëta gjatë përdorimit, ruajtjes ose transportit si dhe nga presioni i ulët i ajrit në lartësi të madhe mund të krijojë rreziqe për sigurinë. • Shmagni zëvendësimin e bateri së me llojin e gabuar që mund të prishë mbrojtjen (për shembull, disa lloje baterish litiumi). • Hedhja e një baterie në zjarr ose në një furrë të nxehtë, ose shtypja ose prerja mekanike e një baterie, mund të rezultojë në një shpërthim. • Lënia e një baterie në një mjedis me temperaturë jashtëzakonisht të lartë ose në një mjedis me presion jashtëzakonisht të ulët ajri mund të rezultojë në një shpërthim ose rrjedhje të lëngut ose gazit të ndezshëm. Paralajmërim • Asnjëherë mos e hiqni veshjen mbështjellëse të këtij autoparlanti. • Asn…

Text truncated - open the document above for the full version.

WARRANTOR This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its aliates, and MMD Hong Kong Holding Limited FLAT/RM 1006 10TH / F C-BONS INTERNATIONAL CENTER WAI YIP STREET KWUN TONG KOWLOON Hong Kong is the warrantor in relation to this product. Dear Customer, Porsche Design electronic products are designed and manufactured to the highest standards and deliver high-quality performance, ease of use and ease of installation. If you encounter any diculties while using your product, we recommend that you rst consult the Quick Start Guide delivered together with your product. Our Customer Service Representatives will also provide you with additional service when needed. Please refer to our Service Contact Information section for further assistance in nding the right contact service number. In the unlikely event of a failure of the product, MMD Hong Kong Holding Limited or one of its aliates will arrange for your electronic product to be serviced, free-of-charge during the warranty period, provided that the product was used in accordance with the user manual (e.g. in the intended environment). This warranty statement is in addition to the statutory warranty obligations of your dealer. Your statutory warranty rights against your dealer are not limited by this warranty statement if the product was not free of defects when delivered. This document only applies to consumer electronic products. For professional use products the warranty terms of the sale or purchase agreement will apply. Please note that consumer electronic products are not intended for commercial use and the warranty service can be refused. Warranty terms The warranty period starts on the date of purchase as stated on your proof-of-purchase and expires at the end of the period indicated in the section “Warranty period” below. If you require service, but you lost your proof-of-purchase or the retailer is unknown to MMD Hong Kong Holding Limited or one of its aliates, the warranty period shall be deemed to have started three months from the date of manufacture indicated on the product or derived from the serial number. If you require service for products without production date or serial number on the product, a valid proof-of-purchase is required. Where a repair is not possible or not commercially viable, MMD Hong Kong Holding Limited or one of its aliates may replace the product with a new or refurbished product of similar functionality. Aer a repair, rmware upgrade or replacement, the warranty period will continue from the date of the original purchase. What is excluded? The warranty does not cover consequential damages (including but not limited to loss of data or loss of income), nor compensation for activities done by yourself, such as regular maintenance, installing rmware updates or saving or restoring data. The warranty excludes, or does not apply if: - The proof of purchase (POP) documents have been altered in any way or made illegible; - The model- and/or serial number or production date code on the product has been altered, removed or made illegible; - Unauthorized service organizations or persons have carried out repairs or product modications and alterations; - The defect is caused by abuse or misuse of the product or by environmental conditions that are not in conformance with the recommended operations of the product; - The defect is caused by connection to peripherals, additional equipment or accessories other than those recommended in the user manual; - The defect is caused by an external enclosure, assembled around the product, which has not been recommended in the user manual; - The product has been damaged - including but not limited to damage by human factors, animals, lightning, abnormal voltage, water or re, natural disaster or transport accident; - The product becomes defective due to normal wear and tear of parts; - The product does not function properly because it was not originally designed, manufactured, approved and/or authorized for the country where you use the product, which might occur in instances where the product has been purchased in another country other than that of its intended use; - The product does not function properly due to problems with access to, or connection with service providers, such as interruptions in the access networks (e.g. internet), faults on the subscriber's or the correspondent's line, local network fault and faults in the transmission network (interference, scrambling, faults or poor network quality). Service needed? In order to avoid unnecessary inconvenience, we advise you to read the user manual carefully and/or consult the support section of this leaet before contacting your dealer or MMD Hong Kong Holding Limited or one of its aliates. To obtain service within the warranty period, please contact the consumer contact center via one of the contact methods indicated in the dedicated section of this service leaet. When your product is no longer within warranty, in some countries you can contact the nearest authorized service center directly. If available, you can nd the addresses of the service centers in the dedicated section of this service leaet. To be able to help you eciently when you contact MMD Hong Kong Holding Limited, one of its aliates or its service partners please have available: - The product type- or model number (also sometimes called model ID); - The proof-of-purchase (e.g. original invoice or cash receipt) indicating the date of purchase, dealer name and model number of the product; - The product serial number or production date code as specied on the product; - The model number, the serial number or production date code (if available). Warranty period The warranty period for all Porsche Design audio products is 24 months. GARANT Dette produkt er fremstillet af og sælges under MMD Hong Kong Holding Limiteds eller en af dennes associerede virksomheders ansvar, og MM…

Text truncated - open the document above for the full version.

MMD Hong Kong Holding Limited Date: 6/14/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: 2AR2SPDS20 Grantee’s FRN: 0028068138 1. MMD Hong Kong Holding Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. MMD Hong Kong Holding Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Tomas Guan Job Title: Safety & Approbation Manager Company Name: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong, China Date:6/14/2023

MMD Hong Kong Holding Limited Date: 6/14/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: 2AR2SPDS20 Grantee’s FRN: 0028068138 MMD Hong Kong Holding Limited (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Contact Person: Gcoff Bostwick Company Name: TPV-USA Corp TPV-USA Corp does not do any other business with the FCC Company Address: 6525 Carnegie Blvd., Suite #200 Charlotte, NC 28211 Email: [email protected] Sincerely yours, MMD Hong Kong Holding Limited Name: Tomas Guan Job Title: Safety & Approbation Manager Company Name: Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong, China Date:6/14/2023

Form: RFT-AMER-TCB-OP-19o Revision: 1 Page 1 of 1 Date: 1/25/2023 [TPV-USA Corp] Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both [TPV-USA Corp ]Agentand [MMD Hong Kong Holding Limited] Aacknowledge consent to obligations of each party pursuant to 47 CFR part §2.911(d)(7) of the FCC rules in regard to the agent for service of process. I [Tomas Guan] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC if there is any change in the status identified above. Applicant Company Name Contact Name Address Telephone No Email FRN : MMD Hong Kong Holding Limited : Tomas Guan : Units 1208-11,12th Floor,C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon,Hong Kong : 86-755-36358341 : [email protected] : 0028068138 : 2AR2SPDS20 Signature: ____________________________________ Date: ____________________________________ I [Gcoff Bostwick] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to the FCC ID designated above. : TPV-USA Corp : Gcoff Bostwick : 6525 Carnegie Blvd., Suite #200 Charlotte, NC 28211 : 980-890-7523 : [email protected] TPV-USA Corp does not do any other business with the FCC Agent Company Name Contact Name Address Telephone No Email Signature: ____________________________________ FCC ID Date: _ 0 _ 3 _ / _ 0 __ 7 _ / _ 2 _ 0 _ 2 __ 3 ________________________ 03/07/2023

MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong, China Confirmation Letter We, MMD Hong Kong Holding Limited The product: Outdoor Speaker And model No.: PDS20,PDS20/00, PDS20/yy（yy=00-99 or blank, for country code） FCC ID: 2AR2SPDS20 PDS20,PDS20/yy（yy=00-99 or blank, for conutry code）have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with PDS20/00. The difference lies only the model name for different appearance color and different country destination. all these changes do not degrade the unwanted emissions of the certified product. Name: Tomas Guan Job Title: Safety & Approbation Manager Company Name: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong, China Date:6/14/2023

MMD Hong Kong Holding Limited Date: 06/14/2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Name: Tomas Guan Job Title: Safety & Approbation Manager Company Name: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong, China Date:6/14/2023

MMD Hong Kong Holding Limited Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AR2SPDS20 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Name: Tomas Guan Job Title: Safety & Approbation Manager Company Name: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong, China Date:6/14/2023

MMD Hong Kong Holding Limited DATE : 06/14/2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Request for Short-Term Confidentiality Company name: MMD Hong Kong Holding Limited FCC ID: 2AR2SPDS20 FCC Part 15 Certification Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.: (1) Test Setup Photos (2) External Photos (3) Internal Photos (4) User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Signature Name: Tomas Guan Job Title: Safety & Approbation Manager Company Name: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong, China Date:6/14/2023

EUT External Photo 1 EUT External Photo 2 EUT External Photo 3 EUT External Photo 4 EUT External Photo 5 EUT External Photo 6

Note:the label is on the back of the device through silk-screen printing.

EUT Internal Photo 1 EUT Internal Photo 2 EUT Internal Photo 3 EUT Internal Photo 4 EUT Internal Photo 5 EUT Internal Photo 6 EUT Internal Photo 7 EUT Internal Photo 8 EUT Internal Photo 9 EUT Internal Photo 10 Antenna

FCC ID: 2AR2SPDS20 According to 447498 D04 Interim General RF Exposure Guidance v01, 2.1.4 MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the product of the maximum antenna gain and the delivered maximum time-averaged power.10 For this case, a RF source is an RF exempt device if its ERP (watts) is…

Text truncated - open the document above for the full version.