2AR45-MIFI01LTE MiFi

Quick Start Guide Getting Started: Thank you for choosing the 4G MiFi. Note: This guide provides the basic operations of the MiFi. For configuration log into the web graphical user interface and click the help icon on the top right corner. Getting to Know Your 4G MiFi 1. Power button 2. Screen 3. Reset button 4. WPS button 5. Micro USB Basic Info on Screen Display 6. Signal Strength of Cellular 7. Network Type 8. Signal Strength of Wi-Fi 9. Message Sign 10. Number of message 11. Battery Power 12. Name of the Network Service Provider 13. Number of Users 14. Traffic statistics Install SIM Card and Battery 1. Power off the MiFi. 2. Remove the back cover and battery. 3. Insert the SIM card into card slot in the correct position. 4. Install back cover and battery. Note: DO NOT remove the 4G SIM card when the MiFi is powered on as this may damage the card and the MiFi. Setting Up a Wi-Fi Connection Step1: Power on the MiFi. Step2: Set up Wi-Fi connection or wired connection as blow. Step3: Connect to internet. I. Turning on MiFi Press “power button” and hold for a while till the screen is lit, and Wi-Fi is on. II. Setting up Wi-Fi connection or wired connection 1. Set up Wi-Fi connection or wired connection as blow. 2. Make sure the 4G MiFi’s Wi-Fi function is on. 3. Select Start> Control Panel> Network Connections> Wireless Network Connection 4. Click “View available wireless networks” to show a list of available Wi-Fi networks . 5. Select the wireless network connection with the 4G MiFi's SSID and click “Connect”. If the security mechanism is applied, you need to enter the correct network key. The SSID and network key are printed on the MiFi’s label. Note: How to change the SSID & Password 1. Log in to http://192.168.1.1 and enter the management page. 2. Select Wireless>Wireless Security Settings, then you will see “Network Name (SSID)” and “Wi-Fi Password”, Ensure you delete the old name and password and enter the new name and new password as your required. 3. Select “Apply” button, then log out. 4. Wait for computer or laptop screen to display the Wi-Fi icon. This means the wireless network connection has been successful. III. Connecting to the internet If the Wi-Fi function is turned on, your device should connect to the Internet automatically. IV. Logging into the Device Management website 1. Make sure the end-user device is connected to the MiFi. 2. Open the browser, enter http://192.168.1.1 in the address box. 3. Enter the username and password, and click “login”. The administrator has the right to check and modify configuration permission. Note: The default username and password are admin. Charging your MiFi 1st method: Charging by power adapter 1. Use compatible power adapter (5v, 1000mA). 2. Power adapter is a selective accessory. 2nd method: Charging by connecting to computer or laptop. Please use the proper cable to connect the MiFi to the computer or laptop. Note: If the MiFi hasn’t been used for a long time, please charge the battery before using. USB Storage Connect the MiFi to the computer via a data cable. Once the computer reads the inserted T-Flash card of the MiFi, it will start to function as USB storage. Restore Factory Settings If you are uncertain of which Wi-Fi settings you have configured or changed, you can restore the factory defaults that come with the MiFi to reconfigure the device Wi-Fi setting.  Log into Device Management Website to restore to factory default settings.  Press and hold “Reset” button for 5 seconds, and the MiFi will be activated again and restored to factory settings. Note: Reset button will delete all the device’s user-defined Wi-Fi settings and restore Admin setting and Wi-Fi Setting to factory defaults. Trouble Shooting: If you are having trouble with the MiFi, here are a few things you can do to get it to function properly: 1. Log into the device management website and click the help icon on the top right corner for answers to frequently asked questions. 2. If the MiFi is not responsive, reboot it by pressing the ‘Reset’ button for about 5 seconds. 3. Restore factory settings Note: All figures above are for reference only. Note: 1. Caution: Risk of explosion if battery is replaced with an incorrect or unapproved type. Used batteries must be disposed according to the manufacturer's instructions. 2. The MiFi product shall only be connected using a USB interface of version USB2.0. 3. Adapter shall be installed near the equipment and shall be easily accessible. 4. The maximum operating temperature of the MiFi is 35°C. 5. The plug considered as disconnect device of adapter. 6. This equipment is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. 7. The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should be minimized. For body worn operation, this model phone has been tested and meets the FCC RF exposure.Guidelines when used with an accessory designated for this product or when used with an accessory that …

Text truncated - open the document above for the full version.

Differences Declaration To whom concern, We company Shanghai Notion Information Technology CO. LTD hereby declares: The product models M022, M022T, M028, M028B, M028AT, M028A, M023, L02C, L02I, L02H, L02B are identical in the same PCB layout, interior structure and electrical circuits, the only difference is the model name for commercial purpose. Authorized signature: Date: 2020-11-06

< Shanghai Notion Information Technology CO. LTD > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Date: 2020-11-06 Subject; Request for Long Term Confidentiality FCC ID: 2AR45-MIFI01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Peng Sun Title: Project Manager

Shanghai Notion Information Technology CO. LTD Statement DATE : 2020-11-26 To whom it may concern: The product is only software change to add 3G band 2&5 and 4G band 7, the previous frequency band is not changed. Due to the equipment class changed, it had to apply for a new ID, and the test data of certified bands reference to the original FCC ID: 2AR45-MIFI Sincerely, Signature of applicant: Name Peng Sun Position Project Manager CompanyName Shanghai Notion Information Technology CO. LTD Address Floor 5,Building 5,NO 289,Bisheng Rd,Pudong district,Shanghai,China Tel +86-18512104268 E-Mail [email protected]

Test Model No.: M022

LTE MiFi Model: M022T SSID: H3SWifi_DB1D WiFi Key: 31934018 User Name: admin Password: admin IP: 192.168.1.1 Rating: 5V 1A I M E I : 8 6 9 6 2 9 0 3 1 9 3 4 0 1 8 S / N : M 0 2 2 T 1 9 0 7 1 2 0 0 0 0 0 1 M A C I D : 0 0 : 1 E : C 8 : 9 F : D B : 1 D Made in China Fabricado por : FCC ID: 2AR45-MIFI01 Shanghai Notion Information Technology Co. LTD. Label:White, self-adhesive copper paper Size:W47.6xH49.3mm

Label location

Test Model No.: M022

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] FCC SAR TEST REPORT Report No.: STS2011079H01 Issued for Shanghai Notion Information Technology CO. LTD Floor 5, Building 5, NO 289, Bisheng Rd, Pudong district, Shanghai, China Product Name: LTE MiFi Brand Name: N/A Model Name: M022 Series Model: M022T, M028, M028B, M028AT, M028A, M023, L02C, L02I, L02H, L02B FCC ID: 2AR45-MIFI01 Test Standard: ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 ( 2.1093) IEEE 1528: 2013 Max. Report SAR (1g): Body: 1.321 W/kg S T L A B S Page 2 of 49 Report No.: STS2011079H01 Test Report Certification Applicant’s name ................. : Shanghai Notion Information Technology CO. LTD Address ................................. : Floor 5, Building 5, NO 289, Bisheng Rd, Pudong district, Shanghai, China Manufacture's Name ............ : Shanghai Notion Information Technology CO. LTD Address ................................. : Floor 5, Building 5, NO 289, Bisheng Rd, Pudong district, Shanghai, China Product description Product name ........................ : LTE MiFi Brand name ......................... : N/A Model name ......................... : M022 Series Model .......................... : M022T, M028, M028B, M028AT, M028A, M023, L02C, L02I, L02H, L02B Standards ............................. : ANSI/IEEE Std. C95.1-1992 FCC 47 CFR Part 2 ( 2.1093) IEEE 1528: 2013 The device was tested by Shenzhen STS Test Services Co., Ltd. in accordance with the measurement methods and procedures specified in KDB 865664 The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of Test ........................................... : Date (s) of performance of tests ............. : 12 Nov. 2020~13 Nov. 2020 Date of Issue .......................................... : 16 Nov. 2020 Test Result.............................................. : Pass Testing Engineer : (Lemon Li) Technical Manager : (Sean She) Authorized Signatory : (Vita Li) Page 3 of 49 Report No.: STS2011079H01 Table of Contents 1. General Information 5 1.1 EUT Description 5 1.2 Test Environment 6 1.3 Test Factory 6 2.Test Standards and Limits 7 3. SAR Measurement System 8 3.1 Definition of Specific Absorption Rate (SAR) 8 3.2 SAR System 8 4. Tissue Simulating Liquids 11 4.1 Simulating Liquids Parameter Check 11 5. SAR System Validation 13 5.1 Validation System 13 5.2 Validation Result 13 6. SAR Evaluation Procedures 14 7. EUT Antenna Location Sketch 15 7.1 SAR test exclusion consider table 16 8. EUT Test Position 17 8.1 Define Two Imaginary Lines on the Handset 17 8.2 Hotspot mode exposure position condition 18 9. Uncertainty 19 9.1 Measurement Uncertainty 19 9.2 System validation Uncertainty 20 10. Conducted Power Measurement 21 11. EUT and Test Setup Photo 26 11.1 EUT Photo 26 11.2 Setup Photo 29 12. SAR Result Summary 33 12.1 Body-worn SAR 33 13. Equipment List 36 Appendix A. System Validation Plots 37 Appendix B. SAR Test Plots 45 Appendix C. Probe Calibration and Dipole Calibration Report 49 Page 4 of 49 Report No.: STS2011079H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 16 Nov. 2020 STS2011079H01 ALL Initial Issue Note: Format version of the report -V01 Page 5 of 49Report No.: STS2011079H01 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name LTE MiFi Brand Name N/A Model Name M022 Series Model M022T, M028, M028B, M028AT, M028A, M023, L02C, L02I, L02H, L02B Model Difference Only different in model name Battery Rated Voltage: 3.7V Charge Limit: 4.2V Capacity: 3000mAh Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled IMEI NULL Hardware Version N/A Software Version N/A Frequency Range WCDMA Band II: 1850~1910MHz WCDMA Band V : 824~849MHz LTE Band 7: 2500~2570MHz WLAN802.11b/g/n(HT20)/n(HT40): 2412~2462MHz Max. Reported SAR(1g): (Limit:1.6W/kg) Band Mode Body Worn (W/kg) PCT WCDMA Band II 1.321 PCT WCDMA Band V 0.410 PCT LTE Band 7 0.478 DTS 2.4G WLAN 0.084 1-g Sum SAR1.496 FCC Equipment Class Licensed Portable Transmitter Worn on Body(PCT) Digital Transmission System (DTS) Operating Mode: WCDMA: RMC, HSDPA, HSUPA Release 6 LTE: QPSK, 16QAM 2.4GWLAN: 802.11 b/g/n(HT20)/n(HT40) Antenna Specification: GSM, WCDMA, LTE: PIFA Antenna BT, WLAN: PIFA Antenna SIM Card Only supports one SIM card Hotspot Mode Not Support DTM Mode Not Support Note: 1.The EUT battery must be fully charged and checked periodically during the test to ascertain uniform power Page 6 of 49 Report No.: STS2011079H01 1.2 Test Environment Ambient conditions in the SAR laboratory: Items Required Temperature (°C) 18-25 Humidity (%RH) 30-70 1.3 Test Factory ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration No.: 625569 IC Registration No.: 12108A A2LA Certificate No.: 4338.01 Page 7 of 49 Report No.: STS2011079H01 2.Test Standards and Limits No. Identity Document Title 1 47 CFR Part 2 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 2 ANSI/IEEE Std. C95.1-1992 IEEE Stan…

Text truncated - open the document above for the full version.

Ref : ACR.345.3.20.MVGB.A SHENZHEN STS TEST SERVICES CO., LTD. 1/F, BUILDING 2, ZHUOKE SCIENCE PARK, CHONGQING ROAD FUYONG, BAO’ AN DISTRICT, SHENZHEN,CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: SN 41/18 EPGO334 Summary: This document presents the method and results from an accredited COMOSAR E-Field probe ca libration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report Page: 1/10 07/14/2020 Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise - 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibretion date: 07/14/2020 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.20.MVGB.A Customer Name Distribution : Shenzhen STS Test Services Co., Ltd. Name Function Date Signature Prepared by : Jérôme LUC 7/28/2020 Checked by : Jérôme LUC 7/28/2020 Approved by : 7/28/2020 Yann Toutain Technical Manager Technical Manager Laboratory Director Issue Date Modifications A 7/28/2020Initial release Name Jérôme LUC Page: 2/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.20.MVGB.A TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Linearity ________________________________________________________________ 4 3.2 Sensitivity _______________________________________________________________ 5 3.3 Lower Detection Limit _____________________________________________________ 5 3.4 Isotropy _________________________________________________________________ 5 3.5 Boundary Effect __________________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 5 5 Calibration Measurement Results .............................................................................. 6 5.1 Sensitivity in air __________________________________________________________ 6 5.2 Linearity ________________________________________________________________ 7 5.3 Sensitivity in liquid ________________________________________________________ 7 5.4 Isotropy _________________________________________________________________ 8 6 List of Equipment .................................................................................................... 10 Page: 3/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.20.MVGB.A 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number SN 41/18 EPGO334 Product Condition (new / used) New Frequency Range of Probe 0.45 GHz-6GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.191 M Dipole 2: R2=0.216 M Dipole 3: R3=0.197 M A yearly calibration interval is recommended. 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEEE 1528 and CEI/IEC 62209 standards. Figure 1 – MVG COMOSAR Dosimetric E field Dipole Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEEE 1528 and CEI/IEC 62209 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their affect. All calibrations / measurements performed meet the fore mentioned standards. 3.1 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. Page: 4/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vH This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.20.MVGB.A 3.2 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards. 3.3 LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurement. The required lower detection limit is 10 mW/kg. 3.4 ISOTROPY The axial isotropy was evaluated by exposing the probe to a reference wave from a standard dipole with the dipole mounted under the flat phantom in the test configuration suggested for system validations and checks. The probe was rotated along its main axis from 0 - 360 degrees in 15 degree steps. The hemispherical isotropy is determined by inserting the probe in a thin plastic box filled with tissue-equivalent liquid, with the plastic box illuminated with the fields from a half wave dipole. The dipole is rotated about it…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTS202010000008F04 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 43 TEST REPORT (WIFI) Applicant: Shanghai Notion Information Technology CO. LTD Address of Applicant: Floor 5,Building 5,NO 289,Bisheng Rd, Pudong district, Shanghai, China Manufacturer: Shanghai Notion Information Technology CO. LTD Address of Manufacturer: Floor 5,Building 5,NO 289,Bisheng Rd, Pudong district, Shanghai, China Equipment Under Test (EUT) Product Name: LTE MiFi Model No.: M022, M022T, M028, M028B, M028AT, M028A, M023, L02C, L02I, L02H, L02B FCC ID: 2AR45-MIFI01 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: October 10, 2020 Date of Test: October 12, 2020-November 06, 2020 Date of report issued: November 06, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202010000008F04 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 43 2 Version Version No. Date Description 00 November 06, 2020 Original Prepared By: Date: November 06, 2020 Project Engineer Check By: Date: November 06, 2020 Reviewer Report No.: GTS202010000008F04 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 43 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 7.3 CONDUCTED PEAK OUTPUT POWER .................................................................................................. 14 7.4 CHANNEL BANDWIDTH ...................................................................................................................... 15 7.5 POWER SPECTRAL DENSITY ............................................................................................................. 18 7.6 BAND EDGES .................................................................................................................................... 21 7.6.1 Conducted Emission Method ..................................................................................................... 21 7.6.2 Radiated Emission Method ........................................................................................................ 23 7.7 SPURIOUS EMISSION ......................................................................................................................... 27 7.7.1 Conducted Emission Method ..................................................................................................... 27 7.7.2 Radiated Emission Method ........................................................................................................ 30 8 TEST SETUP PHOTO ............................................................................................................................ 43 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 4…

Text truncated - open the document above for the full version.

Radiated Emission Model No.:M022 Conducted Emission

2AR45-MIFI01_SAR Setup photo Body Front side(separation distance is 10mm) Body Back side(separation distance is 10mm) Left Edge(separation distance is 10mm) Right Edge(separation distance is 10mm) Top Edge(separation distance is 10mm) Bottom Edge(separation distance is 10mm)