2ARFP-ES8502HC-BControl Panel

C8000 Model: ES8502HC Table of Contents OVERVIEW 1. Overview OVERVIEW INSTALLING THE C8000 2. Installing the C8000     2.1. Determining the Best Location for the C8000        2.2. Necessary Items      INSTALLING THE C8000 2.3. Setting Up the C8000 ◼ ◼ ◼ INSTALLING THE C8000 INSTALLING THE C8000 2.4. Wall Mounting the C8000 ◼ ◼ ◼ INSTALLING THE C8000 2.5. Configuring C8000 Parameters OPERATING THE C8000 3. Operating the C8000 3.1. Emergency Alarms 3.2. Speakerphone   3.3. Emergency Conversation Flow with the C8000 OPERATING THE C8000 3.4. C8000 LEDs                   ◼ ◼ ◼ ◼ RESTORING FACTORY SETTINGS 4. Restoring Factory Settings   REMOVING ALL PERIPHERALS 5. Removing All Peripherals MAINTAINING THE C8000 6. Maintaining the C8000      6.1. Weekly Inspection 6.2. Communications Maintenance 6.3. Replacing the Backup Battery MAINTAINING THE C8000 6.4. Resetting the C8000 SPECIFICATIONS 7. Specifications           ◼ ◼ ◼ ◼ SPECIFICATIONS   SPECIFICATIONS TESTING PERIPHERALS Appendix A Testing Peripherals Testing Emergency Devices    ◼ ◼ TESTING PERIPHERALS Troubleshooting LEGAL NOTICE Formatted: Font: Italic, Complex Script Font: Italic, Do not check spelling or grammar

Page 1 of 1 November 29, 2022 Telefication B.V. Attn: Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Application for composite certification of a Control Panel, FCC ID: 2ARFP-ES8502HC-B Dear Gentlemen, Please find attached our composite application for certification of a Control Panel, FCC ID: 2ARFP-ES8502HC-B, prepared in accordance with FCC Rules part 15 subpart C sections 15.231 and 15.247. The product testing and this application for certification were performed by Hermon Laboratories, which is recognized and accredited by FCC, Test Firm Registration Number is 927748, Designation Number is IL1001. Hermon Labs responsible person is Mr. Michael Nikishin, tel: +972 4626 8440, fax:+972 4628 8277, e-mail: [email protected]. Please send an invoice to Hermon Labs. We hope this application satisfies your requirements Sincerely yours, Tal Cohen, Technical Director of Regulatory, Certification and Reliability

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: Essence Smartcare Ltd. Address: 12 Abba Eban avenue, Ackerstein Tower Bldg. D, City: Herzliya 4612001 Country: Israel To: Telefication B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID:2ARFP-ES8502HC-B Reference number: 47160 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: FCC ID:2ARFP-ES8502HC-B Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Patent pending, Competative advantage Date: November 29, 2022 Name and signature of applicant: Tal Cohen Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 1 of 3 EXTERNAL PHOTOGRAPHS Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 2 of 3 Care Home Control panel External view Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 3 of 3 Rear view

Essence Security International Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HCB Page 1 of 2 Label The label with FCC ID: 2ARFP-ES8502HC-B and IC: 24417-ES8502HCB is affixed on the rear side of the device as shown below. The label material is PVC with a permanent adhesive. Essence Security International Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HCB Page 2 of 2 Label location The statement according to FCC part 15 §15.19(a)(3) is placed in User’s Guide (Application exhibit User_manual_47160).

Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 1 of 7 INTERNAL PHOTOGRAPHS Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 2 of 7 Care Home Control panel Internal view Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 3 of 7 Component side of the RF PCB Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 4 of 7 Component side of the RF PCB Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 5 of 7 LTE Module Antenna Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 6 of 7 BLE Antenna Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 7 of 7 LTE RF module RI7LE910CXSAX module

Essence Smartcare Ltd. FCC ID:2ARFP-ES8502HC-B Page 1 of 1 Environmental evaluation and exposure limit according to FCC CFR 47part 1, §1.1307, §1.1310 The device is classified as mobile one tested according to FCC Part 15 sec.15.231 (operating at 916.5 MHz)* and sec.15.247 (operating at 2400 - 2480 GHz) and also single modular approved transmitter FCC ID: RI7LE910CXSAX. * The standard section 15.231 does not contain RF Exposure limits. Limit for power density for general population/uncontrolled exposure is 1 mW/cm 2 for 1500 -100000 MHz frequency range. The power density P (mW/cm 2 ) = P T / 4π r 2 , where PT is the transmitted power, which is equal to the peak transmitter output power 18.32 dBm plus maximum antenna gain 3 dBi, the maximum equivalent isotropically radiated power EIRP is PT = 16.97 dBm + 3 dBi = 19.97 dBm = 99.31 mW 16.97 dBm is the EUT maximum output power with the tune up tolerance, 3 dBi – antenna gain. The power density at 20 cm (minimum safe distance, required for mobile devices), calculated as follows: 99.31 mW / 4π (20 cm) 2 = 0.0197 mW/cm 2 << 1 mW/cm 2 Maximum conducted power given in FCC ID: RI7LE910CXSAX module grant is 192.3mW (22.84dBm) in band 12, 213.3mW (23.29dBm) in band 66 and 4 and 219.3mW (23.41dBm) in band 2. Limit for power density is f/1500= 0.48 mW/cm2 for band 12 (698-716 MHz) and 1 mW/cm2 for 1500 -100000 MHz for general population/uncontrolled exposure for bands 66, 4 and 2. The gain of antennas used with the module are 8 dBi for band 12, 5.6 dBi for band 66 and 4 and 5 dBi for band 2. The maximum equivalent isotropic radiated power EIRP is for band 12: PT = 22.84 dBm + 8 dBi = 30.84 dBm = 1213.38 mW The power density at 20 cm (minimum safe distance, required for mobile devices), calculated as follows: 1213.38 mW / 4π (20 cm) 2 = 0.241 mW/cm 2 << 0.48 mW/cm 2 Assessment of RF hazard from BLE and LTE wireless module S1/limit + S2/limit ≤ 1, i.e 0.0197/1 + 0.241/0.48 = 0.197 + 0.502 = 0.521 ≤ 1 The aggregate ratio of transmit power to the relevant power limits does not exceed 100% and meets the safety requirements.

BLE Antenna Test Report Frequency range: 2.4-2.48GHz TRP: 16.56 dBm EIRP: 20.72 dBm Peak Gain: 3.0 dBi Azimuth BW: Omni Direction Elevation BW: Omni Direction

Hermon Laboratories Ltd. P.O. Box 23, Binyamina 3055001, Israel Tel. +972 4628 8001 Fax. +972 4628 8277 E-mail: [email protected] Page 1 of 68 Report ID: ESSRAD_FCC.47160_DTS.docx Date of Issue: 28-Dec-22 TEST REPORT ACCORDING TO: FCC 47CFR part 15 subpart C §15.247 (DTS) and subpart B, RSS-247 Issue 2:2017, RSS-Gen Issue 5, ICES-003 Issue 7:2020 FOR: 3B3BEssence Smartcare Ltd. Control Panel 5B5BModel: ES8502HC_B FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HCB This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: ESSRAD_FCC.47160_DTS.docx Date of Issue: 28-Dec-22 Page 2 of 68 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 Test configuration .......................................................................................................................................................... 5 6.3 Changes made in EUT .................................................................................................................................................. 5 6.4 Transmitter characteristics ............................................................................................................................................ 6 7 Transmitter tests according to 47CFR part 15 subpart C and RSS-247 requirements .................................................. 7 7.1 Minimum 6 dB bandwidth .............................................................................................................................................. 7 7.2 Peak output power ...................................................................................................................................................... 12 7.3 Field strength of spurious emissions ........................................................................................................................... 17 7.4 Band edge radiated emissions .................................................................................................................................... 42 7.5 Peak spectral power density ....................................................................................................................................... 45 7.6 Conducted emissions .................................................................................................................................................. 50 7.7 Antenna requirements ................................................................................................................................................. 54 8 Emissions tests according to FCC 47CFR part 15 subpart B and ICES-003 requirements ......................................... 55 8.1 Conducted emissions .................................................................................................................................................. 55 8.2 Radiated emission measurements .............................................................................................................................. 59 9 APPENDIX A Test equipment and ancillaries used for tests ....................................................................................... 63 10 APPENDIX B Test equipment correction factors ......................................................................................................... 64 11 APPENDIX C Measurement uncertainties .................................................................................................................. 66 12 APPENDIX D Test laboratory description ................................................................................................................... 67 13 APPENDIX E Specification references ........................................................................................................................ 67 14 APPENDIX F Abbreviations and acronyms ................................................................................................................. 68 Report ID: ESSRAD_FCC.47160_DTS.docx Date of Issue: 28-Dec-22 Page 3 of 68 1 Applicant information Client name: Essence Smartcare Ltd. Address: 12 Abba Eban avenue, Ackerstein Tower Bldg. D, P.O.Box 2073, Herzliya 4612001, Israel Telephone: +972 732 447 735 Fax: +972 9772 9962 E-mail: [email protected] Contact name: Mr. Israel Gottesman 2 Equipment under test attributes Product name: Control Panel Product type: Transceiver Model(s): ES8502HC_B Serial number: 001 Hardware version: 2.A Software release: 8.1 Receipt date 29-Mar-22 3 Manufacturer…

Text truncated - open the document above for the full version.

Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 1 of 5 SETUP PHOTOGRAPHS This document contains 4 photographs Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 2 of 5 Photograph 1 Setup for OBW measurements Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 3 of 5 Photograph 2 Setup for spurious emission field strength measurements below 30 MHz Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 4 of 5 Photograph 3 Setup for spurious emission field strength measurements from 30 to 1000 MHz Essence Smartcare Ltd. FCC ID: 2ARFP-ES8502HC-B IC: 24417-ES8502HC-B Page 5 of 5 Photograph 4 Setup for spurious emission field strength measurements above 1000 MHz