2ARI2-KSC300SMART CARD KEY

KONA I Co., Ltd. 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Date: 20 June, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2ARI2-KSC300 “KONA I Co., Ltd.” certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Jemma Kim / Project Manager KONA I Co., Ltd. KONA I Co., Ltd. 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Date: 20 June, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2ARI2-KSC300 “KONA I Co., Ltd.” certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Jemma Kim / Project Manager KONA I Co., Ltd.

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: •cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) •cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) •Agent can be Individual Entity or a Company Entity •Agent Entity must be located in US, US address/phone •Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) •Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. KONA I Co., Ltd. 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter must be dated within 1-year (update if other terms apply) of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name : KONA I Co., Ltd. FCC ID : 2ARI2-KSC300 Contact Name : Jemma Kim Address : 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea Zip : 07237 Telephone No : +82 2-2168-7650 Email : [email protected] Applicant Signature : Date: 13 June,2023 Signed by (Printed Name/Title): Jemma kim / Project Manager June 18, 2023

Declaration of Equivalence For declaration of equality between a product variant to be certified with reference to an original product. To be issued and signed by the company responsible for the product variant. Declare on our sole responsibility that the product - Original Model Product Information Product ID: KSC300 are in all relevant parts identical to the product - Variant Model Product Information Product ID: KSC301, KSC302, KSC303, KSC304, KSC305 - The difference between (original design) and (variant design) is : KSC301 : The difference from the original model is that the number of buttons is changed from 8 to 7. KSC302 : The difference from the original model is that the number of buttons is changed from 8 to 6. KSC303 : The difference from the original model is that the number of buttons is changed from 8 to 5. KSC304 : The difference from the original model is that the number of buttons is changed from 8 to 4. KSC305 : The difference from the original model is that the number of buttons is changed from 8 to 3. (Variant model is completely same to original model(electrically and mechanically is same) We, the undersigned, hereby declare that the Second Manufacturer KONA I is identical in both design and implementation. Signed by Company Name : KONA I Co., Ltd. Name : Jemma Kim Tel :+82 2-2168-7650 Korea / 13 June,2023 (Place, date of issue) (Signature / stamp) Jemma Kim / Project Manager

KONA I Co., Ltd. 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2ARI2-KSC300 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics / Block Diagram / Operational Description / Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. 2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos / Internal Photos / Test Setup Photos / User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Sincerely Yours, Jemma Kim / Project Manager KONA I Co., Ltd.

KONA I Co., Ltd. 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea Date: 13 June 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 ,Industry Canada c.c. Timco Engineering, Inc. Certification Division 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA FCC ID : 2ARI2-KSC300 To whom it may concern: I, the undersigned, hereby authorize Technical Manager Isaac Jin of DEKRA Korea Co., Lt d.and here after referred to as DEKRA Korea Co., Ltd. to act on our behalf in all manners r elating to application for equipment authorization, including signing of all documents rela ting to these matters. Any and all acts carried out by Technical Manager Isaac Jin of DEKRA Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing DEKRA Korea Co., Ltd. as our agent, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding KONA I Co., Ltd. 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jemma Kim / Project Manager KONA I Co., Ltd. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. External Photos Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. External Photos Front Rear Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. External Photos Left Right Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. External Photos Top Bottom

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Label Informaion Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Label information Location&Drawing The label needs to be located on the front side of the product, which should be found at lower left.

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Internal Photos Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Internal Photos PCB Front PCB Rear Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Internal Photos Inside Antenna RKE Antenna

RF EXPOSURE REPORT SMART CARD KEY KSC300 KSC301, KSC302, KSC303, KSC304, KSC305 2ARI2-KSC300 Equipment Under Test Modle Name Variant Model Name FCC ID 2023. 05. 16Date of Issue KONA I Co., Ltd. 2023. 04. 18 ~ 2023. 04. 24 Manufacturer Date of Test(s) - KONA I Co., Ltd. IC Number Applicant Cheoin-gu, Yongin-si, Gyeonggi-do, 17030, Rep. of Korea Yeongdeungpo-gu, Seoul, Republic of Korea DEKRA Korea Co., Ltd. 498-2, Geumeo-ro, Pogok-eup, KONA I Co., Ltd. 8F, 3, Eunhaeng-ro, In the configuration tested, the EUT complied with the standards specified above. Issue toIssue by Tel.: +82 31-338-8837 Fax: +82 31-338-8847 Tel.: +82 2-2168-7650 Fax: +82 2-3440-4405 Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. 1. Regulation RF EXPOSURE The SAR exclusion table from RSS-102 issue 5 is reproduced below: Table 1: SAR evaluation – Exemption limits for routine evaluation based on frequency and separation distance Frequency (MHz) Exemption Limits (mW) At separation distance of ≤5 mm At separation distance of 10 mm At separation distance of 15 mm At separation distance of 20 mm At separation distance of 25 mm ≤300 71 mW101 mW132 mW162 mW193 mW 45052 mW70 mW88 mW106 mW123 mW 83517 mW30 mW42 mW55 mW67 mW 19007 mW10 mW18 mW34 mW60 mW 24504 mW7 mW15 mW30 mW52 mW 35002 mW6 mW16 mW32 mW55 mW 58001 mW6 mW15 mW27 mW41 mW Frequency (MHz) Exemption Limits (mW) At separation distance of 30 mm At separation distance of 35 mm At separation distance of 40 mm At separation distance of 45 mm At separation distance of 50 mm ≤300 223 mW254 mW284 mW315 mW345 mW 450141 mW159 mW177 mW195 mW213 mW 83580 mW92 mW105 mW117 mW130 mW 190099 mW153 mW225 mW316 mW431 mW 580056 mW71 mW85 mW97 mW106 mW 245083 mW123 mW173 mW235 mW309 mW 350086 mW124 mW170 mW225 mW290 mW Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Step.2-2 The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below RF EXPOSURE KDB447498 was used as the guidance. SAR test exclusion considerations Step.1 For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion threshold are determined by the following : [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Step.2 For 100 MHz to 6 GHz and test separation distances > 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance – 50 mm)· (f(MHz)/150)]} mW, for 100 MHz to 1500 MHz {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance – 50 mm)·10]} mW, for > 1500 MHz and ≤ 6 GHz Step.2-1 Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. ( f(GHz) : the RF channel transmit frequency in GHz RF Exposure Compliance Issue Therefore, EUT is not required the SAR Evaluation. =0.001 62P(mW) : Output power transmitter (mW) R : Distance to the center of the radiation of the NOTE : f(GHz) was used as worst case is highest frequency.antenna5.00mm ) - S [(P(mW) / R)] X [√f(GHz)] - NOTE =[( 0.0123 /5.00)]X[√0.43392]S : Maximum Power Density = - Frequency Range :433.92 MHz - Worst case output power transmitter :76.10 dBuV/m @ 3 m=-19.10dBm The EUT will only be used with a separation of 50 millimeters or lesser between the antenna and the body of the SAR Exclusion calculation for this exposure is shown below. - P=-19.10dBm- NOTE Power Density at the specific separation SAR test exclusion considerations : RKE =0.0123mW P : Output power transmitter (dBm) Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved.

DEKRA Korea Co., Ltd. Report Number: YI-QA-23-RF-I018(1) YI-QA-P016-04(0) Page : (1) of (16) Effective Data : 2022.01.06 FCC Part 15 Subpart C §15.231 RSS-210 Issue 10 Test Report Equipment Under Test SMART CARD KEY Model Name KSC300 Variant Model Name KSC301, KSC302, KSC303, KSC304, KSC305 FCC ID 2ARI2-KSC300 IC Number - Applicant KONA I Co., Ltd. Manufacturer KONA I Co., Ltd. Date of Test(s) 2023. 04. 18 ~ 2023. 04. 24 Date of Issue 2023. 06. 20 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full Issue to Issue by KONA I Co., Ltd. 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea Tel.: +82 2-2168-7650 Fax: +82 2-3440-4405 DEKRA Korea Co., Ltd. 498-2, Geumeo-ro, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, 17030, Rep. of Korea Tel.: +82 31-338-8837 Fax: +82 31-338-8847 DEKRA Korea Co., Ltd. Report Number: YI-QA-23-RF-I018(1) YI-QA-P016-04(0) Page : (2) of (16) Effective Data : 2022.01.06 Revision history Revision Date of issue Description Revised by -- 2023.05.16 Initial - 1 2023.06.20 Report Number Revision Suhyun.Seo DEKRA Korea Co., Ltd. Report Number: YI-QA-23-RF-I018(1) YI-QA-P016-04(0) Page : (3) of (16) Effective Data : 2022.01.06 Table of contents 1. Applicant Information ................................................................................................... 4 2. Laboratory Information ................................................................................................. 4 3. Summary of test results................................................................................................ 5 4. EUT Description ............................................................................................................ 6 5. Measurement equipment .............................................................................................. 7 6. Antenna Requirement ................................................................................................... 8 7. Field strength of Fundamental ..................................................................................... 9 8. Radiated spurious emissions ..................................................................................... 11 9. Bandwidth measurement ............................................................................................ 14 10. Transmission time .................................................................................................... 16 DEKRA Korea Co., Ltd. Report Number: YI-QA-23-RF-I018(1) YI-QA-P016-04(0) Page : (4) of (16) Effective Data : 2022.01.06 1. Applicant Information 1.1. Details of applicant Applicant : KONA I Co., Ltd. Address : 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea Contact Person : Jemma Kim Telephone : +82 2-2168-7650 Fax : +82 2-3440-4405 1.2. Manufacturer Information Manufacturer : KONA I Co., Ltd. Address : 8F, 3, Eunhaeng-ro, Yeongdeungpo-gu, Seoul, Republic of Korea 2. Laboratory Information Company name : DEKRA Korea Co., Ltd. Test site number : FCC (KR0151), IC (24841) Address : 498-2, Geumeo-ro, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, 17030, Rep. of Korea Web site : http://www.dekra.kr Telephone : +82 31-338-8837 Facsimile +82 31-338-8847 DEKRA Korea Co., Ltd. Report Number: YI-QA-23-RF-I018(1) YI-QA-P016-04(0) Page : (6) of (16) Effective Data : 2022.01.06 4. EUT Description Kind of product SMART CARD KEY Model Name KSC300 Variant Model Name KSC301, KSC302, KSC303, KSC304, KSC305 FCC ID 2ARI2-KSC300 IC Number - Power supply DC 3.70 V Frequency range 433.92 MHz (TX), 0.125 MHz (RX) Modulation technique FSK Number of channels 1 ch Antenna gain / Type -7.26 dBi / PCB Antenna Test Site Registration Number FCC (KR0151), IC (24841) H/W version / S/W version V1.0 / V1.0 Test S/W version - 4.1. Declarations by the manufacturer None 4.2. Details of modification None DEKRA Korea Co., Ltd. Report Number: YI-QA-23-RF-I018(1) YI-QA-P016-04(0) Page : (7) of (16) Effective Data : 2022.01.06 5. Measurement equipment Equipment Manufacturer Model Serial number Calibration Interval Calibration date Calibration due. Test Receiver R&S ESVS30 829673/015 1 year 22.11.22 23.11.22 Signal Generator R&S SMB100A 178128 1 year 22.05.16 23.05.16 Spectrum Analyzer R&S FSV-40 100832 1 year 22.05.16 23.05.16 DC Power Supply HP 6674A 3637A01351 1 year 22.05.17 23.05.17 Horn Antenna R&S HF906 100236 1 year 22.06.27 23.06.27 Bi-Log Ant. S/B VULB 9161SE 4159 2 year 22.03.21 24.03.21 Loop Antenna ETS LINDGREN 6502 00208263 2 year 22.05.17 24.05.17 Power Amplifier SONAMA 310N 186486 1 year 22.11.22 23.11.22 Power Amplifier TESTEK TK-PA18H 170013-L 1 year 22.05.16 23.05.16 Controller INNCO CO2000 CO2000/064/6961003/ L N/A N/A N/A Antenna Master INNCO MA4000 MA4000/038/6961003/ L N/A N/A N/A Controller INNCO CO3000 CO3000/812/34240914 /L N/A N/A N/A Antenna Master INNCO MA4640-XP-ET None N/A N/A N/A ※ Remark Support equipment Description Manufacturer Model Serial number - - - - DEKRA Korea Co., Ltd. Report Number: YI-QA-23-RF-I018(1) YI-QA-P016-04(0) Page : (8) of (16) Effective Data : 2022.01.06 6. Antenna Requirement 6.1. Regulation According to §15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 6.2. Test results Complied The PCB Antenna is an integral antenna, and no antenna other than that furnished by the responsible party shall be used with the device DEKRA Korea Co., Ltd. Report Number: YI-QA-23-RF-I018(1) YI-QA-P016-04(0) Page : (9) of (16) Effective Data…

Text truncated - open the document above for the full version.

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Antenna Datasheet DocumentDatasheet TypePCB Antenna ApplicationRF 433.92MHz PartNo.RKEAnt Revision1.0 Application RF 433.92MHz(Smart Card Key) Features PCB Antenna Size(56.15*7.65mm) Performance Optimizing with external lumped matching components DATASHEET 1 Table of Content Datasheet / PCB Antenna / RF 433.92MHz RKE Ant (Rev. 1) Rev. NoDataTitleContentsPage 02022. 07. 12New Published 12022. 08. 12Changed PCB Pattern Revision History 1. Specifications 1.1 Electrical Specifications3 1.2 Mechanical Specification3 1.3Appearance and Material3 2.PCB Design 2.1Board Dimension 3. Measurement Results6 3.1 MeasuredAntenna Gain7 3.2 Measured Radiation Patterns8 2 Datasheet / PCB Antenna / RF 433.92MHz RKE Ant (Rev. 1) NoItemSpecRemark 1Frequency Range [MHz]433.92 2VSWRMax 2.0:1 3DirectionalOmni directional 4 Impedance [Ω] Nominal 50 1.Specifications 1.1 Electrical Specifications NoItemSpecRemark 1Dimensions56.15*7.65mm 1.2 Mechanical Specification NoItemSpecRemark 1AntennaPCB Pattern*. 1)PCB Stack-up *. 2)CCL Datasheet 1.3 Appearance and Material 3 *. 1) PCB Layer Stack-up 4 Datasheet / PCB Antenna / RF 433.92MHz RKE Ant (Rev. 1) *. 2) CCL datasheet 5 Datasheet / PCB Antenna / RF 433.92MHz RKE Ant (Rev. 1) Datasheet / PCB Antenna / RF 433.92MHz RKE Ant (Rev. 1) 2. PCB Design 2.1 Board Dimension 6 Datasheet / PCB Antenna / RF 433.92MHz RKE Ant (Rev. 1) 3. Measurement Results 3.1 Measured Antenna Gain 7 Datasheet / PCB Antenna / RF 433.92MHz RKE Ant (Rev. 1) 3. Measurement Results 3.2 Measured Radiation Patterns 8

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Test Setup Photos Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Test Setup Photos Radiated Emission_9 kHz ~ 30 MHz Test distance : 3 m, height of table : 0.8 m Radiated Emission_30 MHz ~ 1 GHz Test distance : 3 m, height of table : 0.8 m Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Test Setup Photos Radiated Emission_Above 1 GHz Test distance : 3 m, height of table : 1.5 m