2ARPKDTM-02WTelemetics mangement Terminal

DTM-02W USER’S GUIDE (Telemetics mangement Terminal) ©All Rights Reserved DTM-02W User’s Guide Rev.: 1.0 +Update: 01/10/19 Rev. 1.0 Page 2 of 18 This page contains confidential information, which is protected by copyright and is proprietary to DIV No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV Revision History Revision Issue Date Author Scope 1.0 2019/08/14 Lim.J.H Initial Release DTM-02W User’s Guide Rev.: 1.0 +Update: 01/10/19 Rev. 1.0 Page 3 of 18 This page contains confidential information, which is protected by copyright and is proprietary to DIV No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV Contents 1 WARNINGS FOR SAFETY OPERATION ................................................................ 5 2 INTRODUCTION ...................................................................................................... 9 3 OVERVIEW ............................................................................................................ 10 3.1 Components ................................................................................................................................................. 10 3.3 Features ........................................................................................................................................................ 11 4 HARDWARE DESCRIPTIONS ............................................................................... 12 4.1 DTM-02W ...................................................................................................................................................... 12 4.1.1 I/O Connector ...................................................................................................................................... 13 4.1.2 Status LED .......................................................................................................................................... 15 5 HOW TO USE ........................................................................................................ 16 5.1 User Registration ......................................................................................................................................... 16 5.2 WIFI Mode Operation .................................................................................................................................. 16 6 SPECIFICATIONS .................................................................................................. 17 6.1 DTM-02W ...................................................................................................................................................... 17 7 LIMITED WARRANTY ............................................................................................ 18 DTM-02W User’s Guide Rev.: 1.0 +Update: 01/10/19 Rev. 1.0 Page 4 of 18 This page contains confidential information, which is protected by copyright and is proprietary to DIV No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV Figure FIGURE １ LIN-Q SYSTEM .................................................................................................................................. 9 FIGURE ２ DTM-02W TERMINAL .................................................................................................................... 10 FIGURE ３ DTM-02W TERMINAL .................................................................................................................... 12 FIGURE ４ I/O CONNECTOR ............................................................................................................................. 13 FIGURE ５ STATUS LED ................................................................................................................................... 15 Table TABLE 1 DESCRIPTIONS FOR EACH PARTS OF DTM-01 ............................................................................ 12 TABLE 2 PIN DESCRIPTIONS FOR I/O CONNECTOR .................................................................................... 14 TABLE 3 STATUS LED ...................................................................................................................................... 15 TABLE 4 DTM-02W SPECIFICATIONS ............................................................................................................. 17 DTM-02W User’s Guide Rev.: 1.0 +Update: 01/10/19 Rev. 1.0 Page 5 of 18 This page contains confidential information, which is protected by copyright and is proprietary to DIV No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV 1 Warnings for safety operation This is to protect your safety and property. Please read this manual carefully before using.  Operational Environment - The operating voltage of this products is between 9Vdc and 34Vdc. Please use the specified operating volgage. - Use within the specified temperature range. - This product is specialized for industrial vehicles.  Insallation Precaustions - Insallation and wiring require professional skills. Be sure to install it with the help of a propessional. Incorrect insallation and wiring can cuase the fire or malfuncation. - When installing the product, install it so that it does not inferfere with the operation of safety devices such as airbags and brake levers...etc. - Insall in a location free from moisture. It may cuase damage or accidents if it is installed in places where water or rain is splashed or dusty. - When wiring, be sure to check the position of pipes, tanks, electric wiring, etc., and pay special attention to avoid interference or contact. - Use specified cables and components. - Be careful not to fall down when installing in a place where the ceiling and vibration of the vehicle are severe. - Do not block the vent or heat sink. It may ca…

Text truncated - open the document above for the full version.

Page 2 of 4 Applicant Confidentiality Letter SAMPLE HOIMYUNG ICT Corporation 1203, 8th Daeryungtechnotown, 96, Gamasan‐ro, Geumcheon‐gu Seoul 08501 Korea (Republic Of) Tel. +82 2 6958 3500 / Fax. +82 2 6958 3530 FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 December 30, 2019 Subject: Confidentiality Request for Exhibits under FCC ID: 2ARPKDTM‐02W To Whom It May Concern: Pursuant of Section 0.457 and 0.459 of the Commission’s Rules and KDB 726920 D01 Confidentiality Request Procedures, we hereby request that the exhibits listed below, submitted in support of the certification application for FCC ID: 2ARPKDTM‐02W, be withheld permanently from public disclosure. Exhibit Type Document Number or NameVersion/ or Revision File Name Block Diagram DTM‐02W_Block Diagramn/aDTM‐02W_Block Diagram.pdf Operational Description DTM‐02W_Operational description_rev01 Rev01 DTM‐02W_Operational description_rev01.pdf Parts list DTM‐02W_Part List n/aDTM‐02W_Part List.pdf Schematics DTM‐02W_Schematicsn/aDTM‐02W_Schematics.pdf This request includes third party confidentiality for items not allowed to be accessed by HOIMYUNG ICT Corporation. The below third party and its confidentiality documents are listed as below: Documents only accessible by Zentri Pty Ltd: Exhibit Type Document Number or NameVersion/ or Revision File Name Schematics ADP‐AMW007‐E03.2G, ADP‐AMW007‐E03.2 n/aAMW007‐E03.pdf, ADP‐AMW007‐E03_2.pdf Operational Description APB‐MW007‐104R n/aAPB‐MW007‐104R.pdf Block Diagram ADS‐MW007‐ZentriOS‐105Rn/aADS‐MW007‐ZentriOS‐105R.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04‐1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Page 3 of 4 Exhibit Type Document Number or NameVersion/ or Revision File Name External photos External photos_DTM‐02Wn/aExternal photos_DTM‐02W.pdf Internal photos Internal photos_DTM‐02Wn/aInternal photos_DTM‐02W.pdf Test setup photos Test setup photos_DTM‐02W n/aTest setup photos_DTM‐02W.pdf User Manual DTM‐02W_User Manual_Rev 03 Rev 03 DTM‐02W_User Manual_Rev 03.pdf Best Regards, Jongrak Geun / General Manager HOIMYUNG` ICT Corporation

HOIMYUNG ICT Corporation 1203, 8th Daeryungtechnotown, 96, Gamasan-ro, Geumcheon-gu Seoul 08501 Korea (Republic Of) Tel. +82 2 6958 3500 / Fax. +82 2 6958 3530 December 24, 2019 To : TIMCO ENGENEERING INC. Dear Sir/Madam, Re: Declaration states : EUT uses a previously certified module. We, Hoimyung ICT, hereby declare that this EUT is leveraging previously certified WiFi module. There is no change to module and that the module when installed into this host system(DTM-02W) is identical to what was previously certified under FCC ID: 2ABPY- 5B9198, IC : 11685A-5B9198. The original module’s test reports accurately represents test results under the new host application. And the antenna is the same as the original antenna(Model name: ACA-PIFA-2430). Host product name: Telemetics mangement Terminal Model name: DTM-02W FCC ID: 2ARPKDTM-02W IC : 24504-DTM02W Certified WiFi moduel product name: Spectre Model name: AMW007 FCC ID: 2ABPY-5B9198 IC : 11685A-5B9198 Test report Number: FR641926 (FCC), CR641926(IC) Sincerely, Client’s signature : Client’s name / title : Jongrak Geun / General Manager Contact information / address : [email protected]

\\kdata\Project\2019(일반)\KP19-03001~03500\KP19-03078_회명정보통신_DTM-02W\시험성적서(RF)\FCC\2. Word\접수자료\POA_Letter_140225.docx HOIMYUNG ICT Corporation 1203, 8th Daeryungtechnotown, 96, Gamasan-ro, Geumcheon-gu, Seoul, Republic of Korea Tel. +82 2 6958 3500 / Fax. +82 2 6958 3530 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: September 19, 2019 SUBJECT: FCC Application for 2ARPKDTM-02W To Whom It May Concern: We, the undersigned, hereby authorize Ms. Athena Kim at KCTL Inc. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Ms. Athena Kim at KCTL Inc. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Client’s signature : Client’s name / title : Jongrak Geun / General Manager Contact information / address : [email protected]

http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval External photos of EUT http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval

<Label> <Label Location>

http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval Internal photos of EUT http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval Patch Antenna (GPS) http://www.kctl.co.kr This test report shall not be reproduced, except in full, without the written approval Chip Antenna (Bluetooth Low Energy) PCB Antenna (WiFi)

Data sheet of Multilayer Chip Antenna Part No. : ALA931C5 January 23, 2008 AMOTECH Co., LTD. 5B 1L, Namdong Industrial complex, 617 Namchondong, Namdonggu, Incheon, Korea Notes The contents of this data sheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. AMOTECH - 2 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 1. SPECIFICATIONS 1.1 Electrical Specifications No ITEM SPEC. Remark 1 Frequency Range 2.4 ~2.485 GHz for ISM 2 VSWR 2.5 : 1 max. 3 Gain Avg. -3 dBi min. 4 Polarization Linear 5 Azimuth Beam Pattern Omni-directional 6 Impedance Nominal 50 Ω ※ These values are measured on the matched reference test board. ※ ALA931C5 has higher self-resonance-frequency than ALA931C4. 1.2 Mechanical Specifications No ITEM SPEC. Remark 1 Internal Electrode Ag Pb-free 2 External Electrode Ag/Ni/Sn Pb-free 3 Dimensions (L x W x H) 9.0 x 3.0 x 1.2 mm 4 Unit Weight 97 ± 9 mg 5 Operating Temperature -35 ~ +85 °C 1.3 Appearance and Dimensions No Name Function Material 1 External Electrode Soldering, Input Port Ag/Ni/Sn 2 Direction index Indication of Input Port Ceramic 4 Ceramic Body - Ceramic 3 Model & Serial No. index - Ceramic 5 External Electrode Soldering Ag/Ni/Sn AMOTECH - 3 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 2. MEASUREMENT 2.1 Reference Test Board for Measurement Chip Antenna Matching Stage SMA Connector GND [Unit : mm] 2.2 Diagram for VSWR measurement Network Analyzer Styrofoam AUT AMOTECH - 4 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 2.3 Diagram for radiation gain and pattern measurements iMac A. Anechoic chamber spec. Parameters Condition Unit Chamber size 8x4x4 m Temperature 21.5 °C Humidity 55 % RH Measurement S21 (8753ES) System software Midas (Orbit/FR) B. Measurement coordinates Measurement Plane Symbol Rotating direction Azimuth Azimuth x→y Elevation1 E1 z→x Elevation2 E2 z →-y x y z -y Azimuth E1 E2 AMOTECH - 5 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 3. MEASUREMENT RESULT 3.1 VSWR & Smithchart A. Matching Value (recommend for reference testboard only) ③① ② ① N/C ② 2.7 nH ③ 1.2 nH B. Measured data (for ALA931C5) AMOTECH - 6 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 3.2 Radiation Gain and Pattern [Measured data table] Peak Gain (dBi) Average Gain (dBi) Remark Azimuth 2.8 1.0 @2.45 GHz Elevation1 3.5 -0.7 @2.45 GHz Elevation2 1.7 -1.6 @2.45 GHz [ ALA931C5 radiation pattern : [email protected] ] AMOTECH - 7 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) [ ALA931C5 radiation pattern : [email protected] ] [ALA931C5 Radiation Pattern : [email protected] ] AMOTECH - 8 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 4. SUGGESTED LAYOUT & MATCHING CIRCUIT 4.1 Layout (recommend only) 4.2 Matching Circuit (recommend only) L – type T - type π- type For usable matching, the ground stability must be guaranteed with sufficient via holes and the case effects should be considered. Finally, using one or more lumped chip elements and a tuning stub are recommended for better results. AMOTECH - 9 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 5. RELIABILITY TEST No ITEM TEST CONDITION TEST REQUIREMENTS 1 Adhesive Strength of Termination 1. Applied force on SMD chip till detached point from PCB. F SMD PAD PCB 1. No mechanical damage by forces applied on the right. 2. Strength (F) > 7 kgf 2 Tensile Strength 1. Wire : 0.6~0.8 tined Cu wire F Clamp Wire 1. No mechanical damage by forces applied on the right. 2. Strength (F) > 3 kgf 3 Thermal Shock (Temperature Cycle) 1. 1 cycle / step 1 : -40 ± 3°C, 30 min step 2 : +125 ± 3°C, 30 min 2. Number of cycle : 30 3. Measure after left for 48 hrs min. at room temperature 1. No visual damage 2. Within electric spec (VSWR) 4 High Temperature Resistance 1. Temperature : +125 ± 5°C 2. Time : 1000 ± 24 hrs 3. Measure f C after left for 24 hrs min. at room temperature 1. No visual damage 2. Within electric spec (VSWR) 5 Low Temperature Resistance 1. Temperature : -40 ± 5°C 2. Time : 1000 ± 24 hrs 3. Measure f C after left for 48 hrs min. at room temperature 1. No visual damage 2. Within electric spec (VSWR) 6 Humidity (Steady Condition) 1. Humidity : 85 % RH 1. Temperature : +85 ± 3°C 2. Time : 1000 ± 24 hrs 3. Measure f C after left for 48 hrs min. at room temperature 1. No visual damage 2. Within electric spec (VSWR) AMOTECH - 10 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 6. SOLDERING RECOMMENDATIOS 6.1 Reflow Soldering Profile [ Soldering Reflow Profile for Pb-free ] 6.2 Soldering Land Pattern 10.2 1.3 3.2 7.6 (unit : mm) AMOTECH - 11 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 7. PACKING 7.1 Tape Dimension (unit : mm) A0 3.30±0.10 P0 4.00±0.10 E 1.75±0.10 B0 9.30±0.10 P1 8.00±0.10 F 7.50±0.10 K0 1.30±0.10 P2 2.00±0.10 W 16.00±0.30 D0 1.55±0.05 t 0.30±0.05 7.2 Taping Style 7.3 Packing Unit Quantity Size Reel 1,000 ea Φ7” x 16mm Small Box 3,000 ea (3 reel*1,000ea/reel) 185 * 185 * 68 (mm 3 ) Medium Box 15,000 ea (5 small box*3,000ea/small box) 365 * 200 * 200 (mm 3 ) Large Box 42,000 ea (14 small box*3,000ea/small box) 390 * 390 * 280 (mm 3 ) AMOTECH - 12 - MULTILAYER CHIP ANTENNA Januay 2008 (Rev5.0) 7.4 Description of Packing Label AMOTECH CO., LTD. Name of Company 617 5B 1LT, Namchon-Dong, Namdong-Gu, Inchon, Korea Address of Manufacture Multilayer Chip Antenna Name of Component Type : ALA931C5 Lot No : MA09A4050101 Quantity : 1,000 pcs Quantity : 1,000 pcs Date : 2007/10/01 Date : 2007/10/01 8. STORAGE CONDITION A. Storage environment must be at an ambient temperature of 15~35°C and an ambient humidity of 45~75 % RH. (MSL Level 2) B. Chip antenna can experience degradation of termination solderability when subjected to high temperature of humidity, or if exposed to sulfur or chlorine gases. C. Avoid mechanical shock (ex. falling) to the chip antenna to prevent mechanical cracking inside of the ceramic dielectric due to its own weight. ALA : Amotech LTCC Antenna 931 : Chip Size C5 : Version & Frequency index MA : Mass-product Antenna 09 : Chip Size A5 : Version & F…

Text truncated - open the document above for the full version.

DTM-02W WIFI PCB ANTENNA 규격 1. Antenna Dimensions 2. RF Charcteristics Operating Frequency 2400~2485 MHz Conditions Peak gain 3.29dBi Board 상 측정 Average gain(Linear) -1.2dBi Average efficiency >70% 3. 측정결과 No Freq.[GHz] EFF.[%] Avg.[dBi] Peak.[dBi] 1 2.400 74.08 -1.30 2.59 2 2.442 77.36 -1.11 3.29 3 2.485 75.71 -1.21 2.33 4. 2D pattern

verify No.890838952229 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142 Page (2) of (11) KCTL-TIR001-003/2 Report revision history Date Revision Page No 2019-09-18 Initial report - This report shall not be reproduced except in full, without the written approval of KCTL Inc. This document may be altered or revised by KCTL Inc. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KCTL Inc. will constitute fraud and shall nullify the document. This test report is a General report that does not use the KOLAS accreditation mark and is not related to KOLAS accreditation. KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142 Page (3) of (11) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 CONTENTS 1. General information ......................................................................................................4 2. Device information ........................................................................................................4 2.1. Frequency/channel operations................................................................................5 3. Measurement uncertainty .............................................................................................5 4. RF Exposure .................................................................................................................6 4.1. Test results..............................................................................................................9 5. Measurement Equipment ............................................................................................ 11 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142 Page (4) of (11) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 1. General information Client : HOIMYUNG ICT Corporation Address : 1203, 8th Daeryungtechnotown, 96, Gamasan-ro, Geumcheon-gu, Seoul, Republic of Korea Manufacturer : HOIMYUNG ICT Corporation Address : 1203, 8th Daeryungtechnotown, 96, Gamasan-ro, Geumcheon-gu, Seoul, Republic of Korea Laboratory : KCTL Inc. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-3327, G-198, C-3706, T-1849 Industry Canada Registration No. : 8035A KOLAS No.: KT231 2. Device information Equipment under test : Telemetics mangement Terminal Model : DTM-02W Frequency range : Bluetooth Low Energy_2 402 ㎒ ~ 2 480 ㎒ 802.11b/g/n HT20_2 412 ㎒ ~ 2 462 ㎒ Modulation technique : Bluetooth Low Energy_GFSK 802.11b/g/n HT20_DSSS, OFDM Number of channels : Bluetooth Low Energy _40 ch 802.11b/g/n HT20_11 ch Power source : DC 12 V, DC 24 V Antenna specification : Bluetooth Low Energy _Chip Antenna WIFI_PCB Antenna Antenna gain : 3.50 ㏈i (Bluetooth Low Energy) 3.29 ㏈i (WIFI) Software version : Ver1.0.1 Hardware version : LIGHTTMS_WIFI_R1.0 Operation temperature : -30 °C ~ 70 °C KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142 Page (5) of (11) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 2.1. Frequency/channel operations This device contains the following capabilities: Bluetooth Low Energy, 802.11b/g/n HT20 Ch. Frequency (㎒) 00 2 402 . . . . 19 2 440 . . . . 39 2 480 Table 2.1.1. Bluetooth Low Energy Ch. Frequency (㎒) 01 2 412 . . . . 06 2 437 . . . . 11 2 462 Table 2.1.2. 802.11b/g/n HT20 mode 3. Measurement uncertainty The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k=2 to indicated a 95 % level of confidence. The measurement data shown herein meets of exceeds the U CISPR measurement uncertainty values specified in CISPR 16-4-2 and thus, can be compared directly to specified limits to determine compliance. Parameter Expanded uncertainty (±) Conducted RF power 1.76 ㏈ KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142 Page (6) of (11) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 4. RF Exposure FCC Regulation This document is prepared to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC rules and Regulations. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310, is listed in Table 1-1. According to FCC §1.1310: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b). Table 1 – Limits for Maximum Permissible Exposure (MPE) Frequency Range (㎒) Electric Field Strength [V/m] Magnetic Field Strength [A/m] Power Density [㎽/㎠] Averaging Time [minute] (A) Limits for Occupational / Controlled Exposure 0.3 ~ 3.0 614 1.63 *100 6 3.0 ~ 30 1842/f 4.89/f *900/f 2 6 30 ~ 300 61.4 0.163 1.0 6 300 ~ 1 500 / / f/300 6 1 500 ~ 15 000 / / 5 6 (B) Limits for General Population / Uncontrolled Exposure 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19/f *180/f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1 500 / / f/1 500 30 1 500 ~ 15 000 / / 1.0 30 f=frequency in ㎒, *= plane-wave equivalent power density Per the guidance of KDB 680106, the E-field and H-field limits shown in the table above are extended down to 100 ㎑ KCTL Inc. 65, Sinwon-ro, Yeongtong…

Text truncated - open the document above for the full version.

verify No.583954445144 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142-B Page (2) of (11) KCTL-TIR001-003/2 Report revision history Date Revision Page No 2019-09-18 Initial report - 2019-09-24 Updated measurement equipment 11 2019-10-04 Added simultaneous data 10 This report shall not be reproduced except in full, without the written approval of KCTL Inc. This document may be altered or revised by KCTL Inc. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KCTL Inc. will constitute fraud and shall nullify the document. This test report is a General report that does not use the KOLAS accreditation mark and is not related to KOLAS accreditation. KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142-B Page (3) of (11) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 CONTENTS 1. General information ......................................................................................................4 2. Device information ........................................................................................................4 2.1. Frequency/channel operations................................................................................5 3. Measurement uncertainty .............................................................................................5 4. RF Exposure .................................................................................................................6 4.1. Test results..............................................................................................................9 5. Measurement Equipment ............................................................................................ 11 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142-B Page (4) of (11) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 1. General information Client : HOIMYUNG ICT Corporation Address : 1203, 8th Daeryungtechnotown, 96, Gamasan-ro, Geumcheon-gu, Seoul, Republic of Korea Manufacturer : HOIMYUNG ICT Corporation Address : 1203, 8th Daeryungtechnotown, 96, Gamasan-ro, Geumcheon-gu, Seoul, Republic of Korea Laboratory : KCTL Inc. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-3327, G-198, C-3706, T-1849 Industry Canada Registration No. : 8035A KOLAS No.: KT231 2. Device information Equipment under test : Telemetics mangement Terminal Model : DTM-02W Frequency range : Bluetooth Low Energy_2 402 ㎒ ~ 2 480 ㎒ 802.11b/g/n HT20_2 412 ㎒ ~ 2 462 ㎒ Modulation technique : Bluetooth Low Energy_GFSK 802.11b/g/n HT20_DSSS, OFDM Number of channels : Bluetooth Low Energy _40 ch 802.11b/g/n HT20_11 ch Power source : DC 12 V, DC 24 V Antenna specification : Bluetooth Low Energy _Chip Antenna WIFI_PCB Antenna Antenna gain : 3.50 ㏈i (Bluetooth Low Energy) 3.29 ㏈i (WIFI) Software version : Ver1.0.1 Hardware version : LIGHTTMS_WIFI_R1.0 Operation temperature : -30 °C ~ 70 °C KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142-B Page (5) of (11) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 2.1. Frequency/channel operations This device contains the following capabilities: Bluetooth Low Energy, 802.11b/g/n HT20 Ch. Frequency (㎒) 00 2 402 . . . . 19 2 440 . . . . 39 2 480 Table 2.1.1. Bluetooth Low Energy Ch. Frequency (㎒) 01 2 412 . . . . 06 2 437 . . . . 11 2 462 Table 2.1.2. 802.11b/g/n HT20 mode 3. Measurement uncertainty The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k=2 to indicated a 95 % level of confidence. The measurement data shown herein meets of exceeds the U CISPR measurement uncertainty values specified in CISPR 16-4-2 and thus, can be compared directly to specified limits to determine compliance. Parameter Expanded uncertainty (±) Conducted RF power 1.76 ㏈ KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR19-SRF0142-B Page (6) of (11) This test report shall not be reproduced, except in full, without the written approval KCTL-TIR001-003/2 4. RF Exposure FCC Regulation This document is prepared to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC rules and Regulations. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310, is listed in Table 1-1. According to FCC §1.1310: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b). Table 1 – Limits for Maximum Permissible Exposure (MPE) Frequency Range (㎒) Electric Field Strength [V/m] Magnetic Field Strength [A/m] Power Density [㎽/㎠] Averaging Time [minute] (A) Limits for Occupational / Controlled Exposure 0.3 ~ 3.0 614 1.63 *100 6 3.0 ~ 30 1842/f 4.89/f *900/f 2 6 30 ~ 300 61.4 0.163 1.0 6 300 ~ 1 500 / / f/300 6 1 500 ~ 15 000 / / 5 6 (B) Limits for General Population / Uncontrolled Exposure 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19/f *180/f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1 500 / / f/1 500 30 1 500 ~ 15 000 / / 1.0 30 f=fr…

Text truncated - open the document above for the full version.