2ARXKVHE09-4GLveeaHub

Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Model Name As stated on agency label FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (3) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Responsible Party – U.S. Contact Information Veea Inc 164 E 83rd Street, New York NY, 10028 + 619-787-5225 https://www.veea.com/ (SIGNATURE / DATE) UL (In use for limited model: VHE09 series and VHE10 Series only) To reduce potential safety issues, only the AC adapter provided with the product, a replacement AC adapter provided by VEEA Inc., or an AC adapter purchased as an accessory from VEEA Inc., should be used with the product. This product is only to be connected to PoE networks without routing to outside plants. Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. Pour réduire les problèmes de sécurité potentiels, seul l’adaptateur secteur fourni avec le produit, un adaptateur secteur de remplacement fourni par VEEA Inc. ou un adaptateur secteur acheté en tant qu’accessoire auprès de VEEA Inc. doit être utilisé avec le produit. Ce produit doit uniquement être connecté à des réseaux PoE (alimentation intégrée) sans routage vers des réseaux extérieurs. Risque d’explosion si la pile est changée avec un type incorrect. Veuillez recycler les piles usages selon les Instructions. Federal Communications Commission NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: The product shall be installed at a location where the radiating antenna can be kept 29 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. To reduce potential safety issues, only the AC adapter provided with the product, a replacement AC adapter provided by VEEA Inc., or an AC adapter purchased as an accessory from VEEA Inc., should be used with the product. Pour réduire les problèmes de sécurité potentiels, seul l'adaptateur secteur fourni avec le produit, un adaptateur secteur de remplacement fourni par VEEA Inc. ou un adaptateur secteur acheté comme accessoire auprès de VEEA Inc. doit être utilisé avec le produit. "The power supply cord(s) must be plugged into socket-outlet(s) with earthing connection" or equivalent word or text. Le ou les cordons d’alimentation doivent être branchés dans une ou des prises de courant avec mise à la terre "ou un mot ou un texte équivalent. Warning: . At first before powered on, connect the frame of the unit to earth. . For earthing wire, green-and-yellow insulation is required and the cross-sectional area of the conductor must be more than 0.75mm2 or 18 AWG. . The product shall be installed by a skilled person and the installation shall conform to all local codes. Avertissement: . Avant de mettre sous tension, connectez d'abord le châssis de l'unité à la terre. . Pour le fil de mise à la terre, une isolation verte et jaune est requise et la section transversale du conducteur doit être supérieure à 0,75 mm2 ou 18 AWG. . Le produit doit être installé par une personne qualifiée et l'installation doit être conforme à tous les codes locaux. This unit contains a CR2032 coin cell battery. CAUTION: Risk of explosion if battery is replaced by an incorrect trpe.Dispose of used batteries according to the instructions. Cet appareil contient une pile bouton CR2032. ATTENTION: Risque d'explosion si la batterie est remplacée par un trpe incorrect. Éliminez les batteries usagées conformément aux instructions. "Este produto nao e apropriado para uso em ambientes domesticos, pois podera causar interferencias eletromagneticas que obrigam o usuario a tomar medidas necessarias para minimizar estas interferencias." Professional installation instruction 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 29 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3. External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC limit and is prohibited. 4. Installa…

Text truncated - open the document above for the full version.

Quick Start Guide Model VHE09 48 VDCLT ESTAT PWR RST PWR 1 Your VeeaHub unit’s Serial Number, MAC Address, and ID are on a sticker located under the device. Package Contents Your VeeaHub package contains the following: Thank you for choosing VeeaHub. Please follow these simple but important instructions for optimal use of your new device. Your VeeaHub Unit Welcome • 1 x VeeaHub • 1 x Power Adaptor - including country specific lead • 1 x Wall/Ceiling Mounting Bracket - including mounting screws • 1 x Quick Start Guide Reset Button DC Jack 3x USB 3.0 Ports Ethernet 1, POE+ LEDs RS232/422/485Ethernet 2 SIMMicro SD Power Button Your VeeaHub unit’s Serial Number, MAC Address, and ID are on a sticker located under the device. 2 Installation & Support For instructions on how to install and register your VeeaHub, please visit www.veea.com/products/VHE09/user_guide or scan the QR code below. Notes & Warnings If an Ethernet cable (not supplied) is used, it should be of a shielded type (CAT 6 or greater) The ambient operating temperature range of this equipment is 0 °C to 50 °C. Your VeeaHub should be placed or mounted on a flat surface. The unit and mounting bracket should not be obstructed. This unit contains a CR2032 coin cell battery. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. © 2019 Veea Inc. All rights reserved. Veea and VeeaHub are trademarks of Veea Inc. All other trademarks and tradenames are the property of their respective owners. QUICK START GUIDE VHE09-V001 Compliance For regulatory compliance information, please visit www.veea.com/products/VHE09/regulatory. See the regulatory compliance document before connecting the power supply.

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1 088 Em ail : s ales. [email protected] Project and Product Certification Representative Authori zation Letter SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 {<lTE Reason for Amendment (cunent / obsolete) Revision History Approved Date Fromlo lnitial Release (obsolete) 1,01.0 Nov-1 412006 Revised wording (obsolete) 1.0 2.4 Sept-25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.04,0 May-23-2014 Added FCC lD field (obsolete) 4,0 5.0 Sep-l 6-2014 Updated company name & logo (cunent) 5.0 6.0Jun-27-2018 Veea lnc. 164 E 83rd Street, NEWYORK, USA Minor Outlying lslands, 10028 Date: 718/2020 To:BVCPS,INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Lefter We, Veea lnc., hereby authorize Bureau Veritas Consumer Product Services, lnc. to act as a Certification Body for certifying for the following project(s): FCC lD:2ARXKVHE094GL Product Description: veeaHub Model: VHEO9XXXXX (X=A-Z, 0-9, blank or L") Sincerely, z/r /,x Veea lnc. Tel: 619-787-5225 E-mail, [email protected] SC$F18: Project and Product Certification Representative Authorization Lefter Page 2 ol 2 Rev 6.0

Veea Inc. 164 E 83rd Street, NEWYORK, USAMinor Outlying Islands, 10028 Date: July 8, 2020 Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Subject: Request for Confi dentiality FCC ID: 2ARXKVIIEO9-4GL To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR$$0 .457 ,0.459), we are requesting the Commission to withhold the following attachments as confidentiai document from public disclosure indefinitely. o Schematic Diagram a Block Diagram o Operational Description a Software Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation ofthe equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission' s policy, in order to comply with the marketing regulations in 47 CFR $2.S03 and the importation rules in 47 CFR 52.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. a Extemal Photos a Intemal Photos a Test Setup Photos t Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review pnocess cannot be granted as confidential documents and those information will bi available for public review once the grant of equipment authorization is issued. Best Regards, zft/z-* Richard Kerr ISR \IP Veea Inc. Tel z 619-787-5225 E-mail: [email protected]

Veea Inc. 164 E 83rd Street, NEWYORK, usAMinoroutlyinglslands' 10028 Date: Jury 17, zoz0 To: Federal Communications Commission Equipment Authorization Division Subjecfi Expedited Review Approval FCC ID: 2ARXKVIIEO9-4GL We, the undersigned, Veea Inc., declare that the is identical to the same performance and function as previously certified DFS tested and approved VHE09XXX (X=A.,Z. 0-9. blank or "-"), FCC ID: 2ARXKYIIE09. The differences are as the table below: FCC ID of previously granted device FCC ID:ZARXKVHE09 FCC ID of new application FCC ID:2ARXKYHE09-4GL Technotroryl MTJ-MIMO 802 .l I alhl glnl ac RF chipset:QCA9g84 Same as the previous Bandwidth information and differences: HT20,HT40, VHT20, VHT40,VHT8O Same as the previous Ilifferences in DFS functioning, circuitry, software: RF chipset QCA9984 Wi-Fi Chipset driver version : Linux OCTEONTX 4.9.0 #1 SMP PREEMPT Thu Jan 17 18:21 :31 CST 2019 anrch64 aarch64 Same RF Chipset Same Chipset driver version, Same DFS functioning Same DFS circuitry Ilifferences betwsen the products : Modulation: OFDM,OFDMA, and DSSSS Antenna Type: internal chip antenna Antenna directional gain: 5.25 GHz- 5.35 GHz,2.1 dBi 5.47 GHz- 5.720 GHz,Z.l dBi Modulation: Same as the previous Antenna Type: Same as the previous Antenna directional gain: Same as the previous Narne of test lahs for the grantsl Test Lab: Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch Rlchard Kew{ SRYP Veea Ins Tel: 6$*787*5?25 E-ilttil: [email protected]

Veea Inc. l64E 83rd Street, NEW YORK, USA Minor Outlying Islands, 10028 Date:2020-07-02 FCC lD: 2ARXKVHEO9-4GL AUTHORIZATION LETTER To Whom It May Concern: Veea lnc. hereby authorizes Amanda Wu / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch ("BV CPS Taoyuan"), to act on its behatf in at[ matters retating to the Federal Communication Commission ("FCC") application for equipment authorization in connection with the FCC !D tisted above, inctuding signing of att documents relating to these matters. Any and alt acts carried out by Amanda Wu / Senior Specialist of BV CPS Taoyuan on Veea lnc.'s behatf, within the scope of the powers granted herein, shatl have the same effect as acts of its own. lf you have any questions regarding the authorization, ptease don't hesitate to contact us. Sincerety yours, Richard Kerr / SR VP Veea lnc. Tet : 619-787-5225 E-mait: [email protected] L ?/r/*

Reference No.: 200424C06-1 Page No. 1 / 7 CONSTRUCTION PHOTOS OF EUT Reference No.: 200424C06-1 Page No. 2 / 7 Reference No.: 200424C06-1 Page No. 3 / 7 Reference No.: 200424C06-1 Page No. 4 / 7 Reference No.: 200424C06-1 Page No. 5 / 7 Reference No.: 200424C06-1 Page No. 6 / 7 Reference No.: 200424C06-1 Page No. 7 / 7

Serial Number: XXXXXXXXXXXXXXXXXXXX MAC Number: XX:XX:XX:XX:XX:XX ID Number: XXXX-XXXX-XXXX-XXXX IMEI Number: xxxxxxxxyyyyyyz VHE09 Input・Entrada・输入・ 48V 1.35A Model ・Modelo・型号・ VHE09-4GL Manufactured date · 制造日期· 2020.04.30 Country of Origin・HECHO en・生产地・ / Veea Inc/Taiwan/ 中国台湾制造 申请商 前海爱讯科技（深圳）有限公司 CMIIT ID:XXXXXXXXXX E352974 S1 R-C-Vee-VHE09-4GL FCC ID:2ARXKVHE09-4GL Contains FCC ID:2ATM8EC25A IFETEL ID:XXXXXXXXX-XXXX TD-LTE无线数据终端

Label location FCC ID: 2ARXKVHE09-4GL Label

Reference No.: 200424C06-2 Page No. 1 / 18 CONSTRUCTION PHOTOS OF EUT Reference No.: 200424C06-2 Page No. 2 / 18 Reference No.: 200424C06-2 Page No. 3 / 18 Reference No.: 200424C06-2 Page No. 4 / 18 Reference No.: 200424C06-2 Page No. 5 / 18 Reference No.: 200424C06-2 Page No. 6 / 18 Reference No.: 200424C06-2 Page No. 7 / 18 Reference No.: 200424C06-2 Page No. 8 / 18 Reference No.: 200424C06-2 Page No. 9 / 18 Reference No.: 200424C06-2 Page No. 10 / 18 Reference No.: 200424C06-2 Page No. 11 / 18 Reference No.: 200424C06-2 Page No. 12 / 18 Reference No.: 200424C06-2 Page No. 13 / 18 Reference No.: 200424C06-2 Page No. 14 / 18 Reference No.: 200424C06-2 Page No. 15 / 18 Reference No.: 200424C06-2 Page No. 16 / 18 Reference No.: 200424C06-2 Page No. 17 / 18 Reference No.: 200424C06-2 Page No. 18 / 18

Report No.: SA200424C06 Page No. 1 / 7 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA200424C06 FCC ID: 2ARXKVHE09-4GL Contains module FCC ID: 2ATM8EC25A Test Model: VHE09-4GL Series Model: VHE09XXXXX (X=A-Z, 0-9, blank or “-”) Received Date: Apr. 24, 2020 Test Date: Jun. 02 ~ Jun. 11, 2020 Issued Date: Jun. 17, 2020 Applicant: Veea Inc Address: 164 E 83rd Street, New York NY, 10028, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA200424C06 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SA200424C06 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA200424C06 Original release. Jun. 17, 2020 Report No.: SA200424C06 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: veeaHub Brand: Test Model: VHE09-4GL Series Model: VHE09XXXXX (X=A-Z, 0-9, blank or “-”) Sample Status: Engineering sample Applicant: Veea Inc Test Date: Jun. 02 ~ Jun. 11, 2020 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Jun. 17, 2020 Polly Chien / Specialist Approved by : , Date:Jun. 17, 2020 Bruce Chen / Senior Project Engineer Report No.: SA200424C06 Page No. 5 / 7 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 29cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA200424C06 Page No. 6 / 7 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max AV Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2412~2462 27.13 6.21 29 0.204 1 WLAN 5180~5240 28.94 8.12 29 0.481 1 WLAN 5260~5320 23.36 8.12 29 0.133 1 WLAN 5500~5720 23.63 8.12 29 0.142 1 WLAN 5745~5825 29.65 8.12 29 0.566 1 Zigbee 2405~2475 16.76 3.2 29 0.009 1 BT LE 2402~2480 -5.33 6.0 29 0.0001 1 BT EDR 2402~2480 0.03 6.0 29 0.0004 1 LoRa 923.3 MHz – 927.5 MHz 24.71 5.0 29 0.089 0.616 For WLAN 2.4GHz Band: Directional gain = 3.2dBi + 10log(2) = 6.21dBi For WLAN 5.0GHz Band: Directional gain = 2.1dBi + 10log(4) = 8.12dBi For Zigbee: antenna gain = 3.2dBi For BT: max. antenna gain = 6.0dBi For LoRa: antenna gain = 5.0dB…

Text truncated - open the document above for the full version.

Report No.: RF200424C06-1 Page No. 1 / 42 Report Format Version:6.1.2 Partial FCC Test Report (Spot Check) Report No.: RF200424C06-1 FCC ID: 2ARXKVHE09-4GL Test Model: VHE09-4GL Series Model: VHE09XXXXX (X=A-Z, 0-9, blank or “-”) Received Date: Apr. 24, 2020 Test Date: Jun. 02 ~ Jun. 11, 2020 Issued Date: Jun. 17, 2020 Applicant: Veea Inc Address: 164 E 83rd Street, New York NY, 10028, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF200424C06-1 Page No. 2 / 42 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Description of Support Units ............................................................................................................. 12 3.3.1 Configuration of System under Test .................................................................................................. 12 3.4 General Description of Applied Standards and References ............................................................. 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Set Up ........................................................................................................................................ 17 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 19 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 19 4.2.2 Test Instruments ................................................................................................................................ 19 4.2.3 Test Procedures ................................................................................................................................. 20 4.2.4 Deviation from Test Standard ............................................................................................................ 20 4.2.5 Test Setup .....................................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF181115C24-4 Page No. 1 / 78 Report Format Version:6.1.2 FCC Test Report Report No.: RF181115C24-4 FCC ID: 2ARXKVHE09 Test Model: VHE09 Series Model: VHE09XXX (X=A-Z, 0-9, blank or "-") Received Date: Nov. 15, 2018 Test Date: Mar. 29 ~ Apr. 23, 2019 Issued Date: May 24, 2019 Applicant: Veea Inc Address: 164 E 83rd Street, New York NY, 10028, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF181115C24-4 Page No. 2 / 78 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .................................................…

Text truncated - open the document above for the full version.