2AS3R-200206SPA

©2021 Bestway Inflatables & Material Corp. All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten/Tutti i diritti riservati Trademarks used in some countries under license from/ Marques utilisées dans certains pays sous la licence de/ Marcas comerciales utilizadas en algunos países bajo la licencia de/ Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/ Marchi utilizzati in alcuni paesi concessi in licenza a Bestway Inflatables & Material Corp., Shanghai, China Manufactured, distributed and represented in the European Union by/ Fabriqués, distribués et représentés dans l’Union Européenne par/Fabricado, distribuido y representado en la Unión Europea por/ Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto, distribuito e rappresentato nell'Unione Europea da Bestway (Europe) S.r.l., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en Latinoamérica por/Distribuído na América Latina por Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: (+61) 29 0371 388; New Zealand: 0800 142 101 Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL Exported by/Exporté par/Exportado por/Exportiert von/Esportato da Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong Tel: +86 21 69135588 (For U.S. and Canada) www.bestwayusa.com bestwayusa.com/support 2 IMPORTANT SAFETY INSTRUCTIONS PG 004 PRE-SETUP PG 004 INSTALLATION PG 004 USING THE SPA PG 004 MAINTENANCE PG 004 DISASSEMBLY AND STORAGE PG 004 TROUBLESHOOTING PG 004 ERROR CODES PG 004 CONTENTS WE SUGGEST NOT TO RETURN THE PRODUCT TO THE STORE QUESTIONS? PROBLEMS? MISSING PARTS? For FAQ, Manuals, Videos Or spare Parts, Please Visit bestwayusa.com/support V i s i t w w w . b e s t w a y u s a . c o m / s u p p o r t f o r h e l p Visit the Bestway YouTube channel OWNER’S MANUAL S200206 READ AND FOLLOW ALL INSTRUCTIONS. Carefully read, understand, and follow all information in this user manual before installing and using the spa. These warnings, instructions, and safety guidelines address some common risks of water recreation, but they cannot cover all risks and dangers in all cases. Always use caution, common sense, and good judgment when enjoying any water activity. Retain this information for future use. In addition, the following information can be supplied depending on the spa type. Keep these instructions in a safe place. If instructions are missing, please contact the manufacturer or search it on the website www.bestwayusa.com. IMPORTANT SAFETY INSTRUCTIONS 303021264959_14x21cm_60002E; 60004E; 60006E; 60008E; 60010E; 60016E; 60018E; 60020E; 60022E; 60024E; 60026E; 60038E; 60060E; 60062E; 60086E; 22AirJetSPA 3 WARNING IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS. WARNING – To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. A wire connector is provided on this unit to connect a minimum 8 AWG (8.37 mm 2 ) solid copper conductor between this unit and any metal equipment, metal enclosures of electrical equipment, metal water pipe, or conduit within 5 feet (1.5 m) of the unit. DANGER – Risk of injury. a) Replace damaged cord immediately. b) Do not bury cord. c) Connect to a grounded, grounding type receptacle only. WARNING – This product is provided with a ground-fault circuit-interrupter integrated with the power plug at the end of the cord. The GFCI must be tested before each use. With the product operating, push the test button on the GFCI and the product should not operate. Push the reset button on the GFCI and the product should now operate normally. When the product fails to operate in this manner, there is a ground current flowing indicating the possibility of an electrical shock. Disconnect the power until the fault has been identified and corrected. DANGER – Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by children. To avoid accidents, ensure that children cannot use this spa unless they are supervised at all times. DANGER – Risk of Injury. The suction fittings in this spa are sized to match the specific water flow created by the pump. Should the need arise to replace the suction fittings or the pump, be sure that the flow rates are compatible. Never operate spa if the suction fittings are broken or missing. Never replace a suction fitting with one rated less than the flow rate marked on the original suction fitting. DANGER – Risk of Electric Shock. Install at least 5 feet (1.5 m) from all metal surfaces. As an alternative, a spa may be installed within 5 feet of metal surfaces if each metal surface is permanently connected by a minimum 8 AWG (8.37 mm 2 ) solid copper conductor to the wire connector on the terminal box that is provided for this purpose. DANGER – Risk of Electric Shock. Do not permit any electric appliance, such as a light, telephone, radio, or television, within 5 feet (1.5 m) of a spa. WARNING – To reduce the risk of injury: a) The water in a spa should never exceed 104°F (40°C). Water temperatures between 100°F (38°C) and 104°F (40°C) are considered safe for a healthy adult. Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes. b) Since excessive water temperatures have a high potential for causing fetal damage during the early months of pregnancy, pregnant or possibly pregnant women should limit spa wa…

Text truncated - open the document above for the full version.

Bestway (Hong Kong) International Ltd. Declaration Letter We Bestway (Hong Kong) International Ltd. hereby declare that the product SPA / S200206, S300206 is not capable of operating with channel 12 and 13 in regions of US and Canada. Versions of the product available for import and sale in the US and Canada will not operate on channels 12 and 13. It will not be possible for users and configure these channels in the US and Canada version. By: ______________________ Mi Huang (Signature 1 ) (Print name) Title: Director________ On behalf of: Bestway (Hong Kong) International Ltd. (Company Name) Telephone: _____+86-021-69133312_____________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC ID:2AS3R-200206 IC : 26017-200206 Declaration Letter We, Bestway (Hong Kong) International Ltd. Address: SUITE 713, 7/FLOOR, EAST WING, TSIM SHA TSUI CENTRE, 66 MODY ROAD, KOWLOON, HONG KONG Declare that Our Product SPA, model: S200206,S300206. They use the same electric circuit and RF module, the difference is the color and physical structure. Declared by: Bestway (Hong Kong) International Ltd. Name: Mi Huang Signature: Date:2022-11-16

Bestway (Hong Kong) International Ltd. 041521-14 Authority to Act as Agent Date: November 13, 2022 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: ______Intertek Testing Service Shanghai______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____2023.11.13_____ By: __________________________ _______Mi Huang________ (Signature 1 ) (Print name) Title: ____Director_____ On behalf of: __Bestway (Hong Kong) International Ltd.__ (Company Name) Telephone: ____+86-021-69133312___________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Bestway (Hong Kong) International Ltd. 041521-14 Request for Confidentiality Date: November 13, 2022 Subject: Confidentiality Request for: ______2AS3R-200206_____ Pursuant to FCC 47 CFR 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term ☐ Permanent * 3 User’s Manual ____Bestway (Hong Kong) International Ltd._____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: __________________________ _______Mi Huang____________ (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC ID:2AS3R-200206 IC : 26017-200206 External Photos FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206

FCC ID:2AS3R-200206 IC : 26017-200206 External Photos FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206

S300206 S200206 Location

FCC ID:2AS3R-200206 IC : 26017-200206 Internal Photos FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206 Antenna Location FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206

FCC ID:2AS3R-200206 IC : 26017-200206 Internal Photos FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206 Antenna FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206 FCC ID:2AS3R-200206 IC : 26017-200206

Bestway (Hong Kong) International Ltd. MPE ASSESSMENT REPORT Report Type: FCC MPE assessment report Model: S200206, S300206 REPORT NUMBER: 220300150SHA-003 ISSUE DATE: October 26, 2022 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-01_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-01_V1© 2018 Intertek Page 2 of 8 Report no.: 220300150SHA-003 Applicant: Bestway (Hong Kong) International Ltd. SUITE 713, 7/FLOOR, EAST WING, TSIM SHA TSUI CENTRE, 66 MODY ROAD, KOWLOON, HONG KONG Manufacturer: Bestway (Hong Kong) International Ltd. SUITE 713, 7/FLOOR, EAST WING, TSIM SHA TSUI CENTRE, 66 MODY ROAD, KOWLOON, HONG KONG Factory: Bestway (Nantong) Recreation Corp. No. 8 Hui Min West Road, Economic Development Zone, Rugao, Jiangsu 226500, P.R. China FCC ID: 2AS3R-200206 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part2.1093 FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Eric Li Reviewer Wakeyou Wang Report No.: 220300150SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 8 Revision History Report No. Version Description Issued Date 220300150SHA-003 Rev. 01 Initial issue of report October 26, 2022 Report No.: 220300150SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 8 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: SPA Type/Model: S200206, S300206 Description of EUT: EUT is a Wireless SPA with BLE and WIFI functions, there are two models, both of them are the same except the physical size and filter, we test the model of S300206 as representative and list the worst results in this report. Rating: 110-120V~60Hz,12A Category of EUT: Class B EUT type: Tabletop Floor standing Software Version: / Hardware Version: / Sample received date: June 27, 2022 Date of test: June 28 , 2022~ July 6, 2022 1.2 Technical Specification Frequency Band: 2400MHz ~ 2483.5MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20, IEEE 802.11n-HT40 Type of Modulation: IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT20: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT40: OFDM (64-QAM, 16-QAM, QPSK, BPSK) Channel Number: 11 Channels for 802.11b, 802.11g and 802.11n(HT20) 7 Channels for 802.11n(HT40) Channel Separation: 5 MHz Antenna: FPC Antenna, 2.0dBi Frequency Band: 2402MHz to 2480MHz Support Standards: Bluetooth Low Energy Type of Modulation: GFSK Channel Number: 40 Channel Separation: 2MHz Antenna Information: FPC Antenna, gain is 2.0dBi Report No.: 220300150SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 8 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN1175 IC Registration Lab Registration code No.: 2042B-1 VCCI Registration Lab Registration No.: R-4243, G-845, C-4723, T-2252 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 220300150SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 8 2 MPE Assessment Test result: Pass 2.1 MPE Assessment Limit Mobile device exposure for standalone operations: Frequency range E-field strength (V/m) H-field strength (A/m) B-field (uT) Equivalent plane wave power density S eq (W/m 2 ) 0-1 Hz - 3,2 × 10 4 4 × 10 4 - 1-8 Hz 10 000 3,2 × 10 4 /f 2 4 × 10 4 /f 2 - 8-25 Hz 10 000 4 000/f 5 000/f - 0,025-0,8 kHz 250/f 4/f 5/f - 0,8-3 kHz 250/f 5 6,25 - 3-150 kHz 87 5 6,25 - 0,15-1 MHz 87 0,73/f 0,92/f - 1-10 MHz 87/f 1/2 0,73/f 0,92/f - 10-400 MHz 28 0,073 0,092 2 400-2 000 MHz 1,375 f 1/2 0,0037 f 1/2 0,0046 f 1/2 f/200 2-300 GHz 61 0,16 0,20 10 Mobile device exposure for simultaneous transmission operations: the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 220300150SHA-003 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 8 2.2 Assessment Results Power density (S) is calculated according to the formula: S = P / (4πR²) Where S = power density in mW/cm² P = Radiated transmit power in mW G = numeric gain of transmit antenna R = distance (cm) As we can see from the test report 220300150SHA-001&220300150SHA-002: The calculations in the table below use the highest gain of antenna for client EUT. These calculations represent worst case in terms of the exposure levels. Mode Frequency band Max Power Antenna Gain R S Limits (MHz) dBm dBi (cm) (mW/cm2) (mW/cm2) Bluetooth 2402 -2480 0.60 2.0 20 0.0004 1 WIFI 2412-2462 17.84 2.0 20 0.0192 1 Note: 1 mW/cm2 from 1.310 Table 1 The sum of the MPE ratios for all simultaneously transmitting is 0.0004/1+0.0192/1=0.02…

Text truncated - open the document above for the full version.

供应商名称Supplier Name： 东莞市一佳电子通讯科技有限公司 器件名称Product Name： WIFI天线 型号规格Product Type WIFI天线，1代IPEX,线径1.13，线长132mm,材质PCB 拓邦料号TOPBAND PN： 制造商名称Manufacturer Name： 东莞市一佳电子通讯科技有限公司 制造商料号Manufacturer PN： YJT01.010.007.301A 环保属性 Environmental properties：RoHS REACH □HF □PAHS □ 湿敏等级 MSL： 非湿敏器件 承认书版本Spec Version： V1.0 送承日期 Supply Date： 2022.11.04 供应商信息 Supplier Information（加盖公章）： 对深圳拓邦股份有限公司 器件规格承认书 SPECIFICATION FOR APPROVAL 供应商确认信息 拓邦确认信息 Approved by Topband 研发 拟制 谢丽 批准 陈国强 业务接口人 申辉 Approved by supplier 器件确认人 采购 变更记录 Change History list 版本 Version 变更描述 Change Description 核对 Checked 审核 Approved 日期 Date V1.0 首次发行 承认书项目表 NO . 内容 （Contents） 页数 （Number of Page） 页码 （Page Code） 1 承认书封面（Spec Cover） 11 ~ 2 承认书封面（p） 2 承认书项目表（Spec Item ） 13 3 工程成品图（Drawing） 14 4 天线规格（Antenna Specification） 15 5 S参数测试（S Parameter ） 16 6 无源测试（Passive Test ） 27 ~ 8 7 方向图（Radiation Pattern ） 39 ~ 11 8 天线装配图（Antenna Profile） 112 9 材质证明（Mt ilC tifi t） 1613 289 材质证明（Material Certificate ） 1613 ~ 28 10 RoHS报告（RoHS Test Report ） **** 11N/AN/AN/A add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 12--- 13--- 天线规格 Antenna Specification Electrical Properties Frequency 2.4-2.5GHz qy Impedance50 Ohm Nominal V.S.W.R2.0 Max Gain 20dBi Gain 2.0 dBi RadiationOmni-directional PolarizationLinear Physical Properties Connector 1代IPEX Cable TypeO.D.1.13mm Cable Length132mm Cable ColorBlack add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Operating Temp.-40 ~ +85 ̊C Storage Temp / Humidity 25±5 ̊C / <70% AntennaPerformance Test Agilent Antenna Performance Te s t Agilent E5071B SS Parameter Test // WiFi Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 AntennaPassive TestAntenna Passive Te s t ZZ Y X X Z Y add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Passive Test For WiFi Antenna FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 70.6 -1.5 1.5 2410 70.9 -1.5 1.6 2420 69.8 -1.6 1.3 2430 68.1 -1.7 1.4 2440 66.4 -1.8 1.3 2450 68.4 -1.7 1.3 2460 67.9 -1.7 1.8 2470 68.9 -1.6 1.9 2480 68.2 -1.7 2.0 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 2490 70.6 -1.5 1.9 2500 70.9 -1.5 1.8 Radiation Pattern For WiFi Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 WiFi Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 3 Acrylic Foam Tape 4229P For Professional Market Applications General Description 3M ™ Acrylic Foam Tape 4229P is a medium-density, dark gray acrylic foam tape with high performance acrylic adhesives. 3M acrylic foam tape 4229P is characterized by high performance peel and shear adhesion, high internal strength, good conformability and excellent plasticizer resistance. Typical applications include body side moldings; stainless steel, ABS and PVC rocker panels; wheel lip moldings, door edge moldings, nameplates/ ornamentation, luggage rack slats, wind and rain defl ectors, and dashboard overlays. 3M acrylic foam tape 4229P utilizes the same proprietary acrylic foam core and adhesive technology that has been proven successful on numerous OEM automotive applications. The acrylic foam core has unique viscoelastic properties that allow it to elongate and relax when put under load, thereby minimizing stress on the adhesive bond line. These properties allow the tape to bond more effectively to a wide variety of automotive surfaces. Data Sheet September 2004 Product Construction Shelf Life One year from date of receipt by customer when stored at 4°C - 38°C (40°F - 100°F) and 0-95% relative humidity. Optimum storage conditions are 22°C (72°F) and 50% relative humidity. Typical Applications “B” Pillar Applique Dash Overlays Body Side and Rocker MoldingsWheel Lip Moldings Supersedes technical data sheet dated May 1998 Luggage Rack Slats Door Edge Moldings Ornamentation Liner printed with 3M Logo AR-7 Acrylic Adhesive Acrylic Foam DS-4 Acrylic Adhesive Data Sheet 4229P Page 2 Performance Properties Values shown are typical values not to be used for specifi cation purposes. Foam: Dark Gray Acrylic Adhesive: Liner Side: AR7 High Performance Acrylic Non-liner Side: DS4 High Performance Acrylic Thickness: 0.76 mm (0.030 in.) Range: min. 0.68 mm (0.027 in.) max. 0.84 mm (0.033 in.) Density: 688 kg/m 3 (43 lb/ft 3 ) Range: min. 608 kg/m 3 (38 lb/ft 3 ) max. 768 kg/m 3 (48 lb/ft 3 ) Release Liner: Red Polyethylene - 3M Logo Printed Roll widths: min. 4 mm (0.157 in.) Roll Lengths: For widths less than 8 mm (0.314 in.): Up to 98.8 m (108 yds.). For widths between 8 - 9.5 mm (0.314 - 0.375 in.): Up to 131.6 m (144 yds.). For widths greater than 9.5 mm (0.375 in.): Up to 160 m (175 yds.) Performance tests are run using standard test procedures. The values presented are typical values not to be used for specifi cation purposes. 1. Breakaway and Continuing Peel 72 hrs. at 22°C (72°F) Breakaway Peel 8.6 kg (19 lbs.) Continuing Peel 4.1 kg (9 lbs.) Breakaway and Continuing Peel tests are run with 12.7 mm (0.5 in.) wide tape on PVC test bars. Tests were run on base coat/clear coat paint at a separation rate of 305 mm/min. (12 in./min.). 2. Static Shear Exceeds 100 hours at 70°C (158°F). Static shear tests are run with 12.7 mm (0.5in.) wide by 50.8 mm (2 in.) long tape on PVC test bars. 6.8 kg (15 lbs.) roll-down against stainless steel. Static weight is 250 gm (0.55 lbs.). Physical Properties Minimum 10% Post Consumer Fiber Printed in USA © 3M 2004 75-3467-4643-3 Automotive Division 3M Center, Building 223-1S-02 St. Paul, MN 55144-1000 www.3MAutomotiveTape.com 3 Many plastic substrates can be diffi cult to adhere to and may require the use of a 3M ™ Adhesion Promoter to ensure a reliable bond. Please contact 3M Automotive Technical Service or Sales for assistance with application questions. Warranty and Limited Remedy: This product will be free from defects in material and workmanship at the t…

Text truncated - open the document above for the full version.

Bestway (Hong Kong) International Ltd. RF TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report Model: S200206, S300206 REPORT NUMBER: 220300150SHA-002 ISSUE DATE: October 26, 2022 DOCUMENT CONTROL NUMBER: TTRF15.247-02_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.247-02_V1 © 2018 Intertek Page 2 of 41 Report no.: 220300150SHA-002 Applicant: Bestway (Hong Kong) International Ltd. SUITE 713, 7/FLOOR, EAST WING, TSIM SHA TSUI CENTRE, 66 MODY ROAD, KOWLOON, HONG KONG Manufacturer: Bestway (Hong Kong) International Ltd. SUITE 713, 7/FLOOR, EAST WING, TSIM SHA TSUI CENTRE, 66 MODY ROAD, KOWLOON, HONG KONG Factory: Bestway (Nantong) Recreation Corp. No. 8 Hui Min West Road, Economic Development Zone, Rugao, Jiangsu 226500, P.R. China FCC ID: 2AS3R-200206 IC: 26017-200206 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2020): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-247 Issue 2 (February 2017): Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5 (March 2019) Amendment 1: General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Eric Li Reviewer Wakeyou Wang Report No.: 220300150SHA-002 TEST REPORT TTRF15.247-02_V1 © 2018 Intertek Page 3 of 41 Content REVISION HISTORY................................................................................................................................................ 5 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 6 1 GENERAL INFORMATION ............................................................................................................................. 7 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 7 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 7 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 8 2 TEST SPECIFICATIONS ................................................................................................................................... 9 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................... 9 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................... 9 2.3 TEST SOFTWARE LIST .......................................................................................................................................... 10 2.4 TEST PERIPHERALS LIST ....................................................................................................................................... 10 2.5 TEST ENVIRONMENT CONDITION: .......................................................................................................................... 10 2.6 INSTRUMENT LIST .............................................................................................................................................. 11 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 13 3 MINIMUM 6DB BANDWIDTH ..................................................................................................................... 14 3.1 LIMIT .............................................................................................................................................................. 14 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 14 3.3 TEST CONFIGURATION .....................................................................................................................................…

Text truncated - open the document above for the full version.