2AS7X-W13Projector

Doosl Mini Video Projector User Manual W13-M 1. Do not look directly into the projector light. 2. Don't touch the project lens. 3. Mains adapter is used as disconnect device and it should remain readily operable during ntended use. In order to discon- nect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 4. Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. 5. Changes or modified to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 6. Use of this unit near fluorescent lighting may cause interfer- ence regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. 7. Shock hazard - Do Not Open. 8. Caution and marking information is located at the rear or bottom of the apparatus. 9. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing. 10. Objects filled with liquids, such as vases, shall not be placed on the apparatus. WARNINGS 1 PRODUCT OVERVIEW 2 On/of Arrow Keys Ok Model ʒ ʓ ʔ ʕ Set Up Return Focusing Ring Keystone Correction ʖ ʗ ʘ ʙ ʒ ʓ ʔ ʕ ʖ ʗ ʘ ʙ ʓ ʓ DC Power Socket PRODUCT OVERVIEW 3 ʚ ʚ ʛ USB1 HDMI Port ʛ AV 3.5mm Headphone Jack Power Forward Backward Move Left Input Source Menu Return Volume DownVolume Up Move RightMove UpMove Down Play/Pause Mute 1. Connect the projector to the DC power adapter,then turn on the power supply of the adapter, the power indicator light of the body will be on, and the projector will enter the standby state. 2. Start: Press the “ ” button on the projector or the remote control. 4 REMOTE CONTROL STARTING PROJECTOR CONNECTING In different angel you put the projector, the projection will Deformation like a trapezoid,use the keystone correction to make it correctly. Focusing Ring Keystone Correction Keystone Correction 5 Press " " of the remote control, enter signal source menu. Use the arrow keys " " and the "OK" to select the signal source. Select "Wireless" to choose your home wireless network. Enter the password to connect. The name of your home wireless network will appear in the upper right coner of the projectionscreen after the projector connects with it successfully. If not, please check your password. AirpalyMiracast Network settings Network On Network Off Wireless SSID None Status Enable IP Address 0.0.0.0 MAC Address 94-A4-08-A0-10-74 Network Information Connected To... SSID ChinaNet-JvA9 Mode None Password ConnectedManual IP Settings Airpaly Miracast Network settings W13-M 6 1. Wifi Wireless Connection for IOS and Android device Click "Signal source " on the remote control, select "MCAST >Network settings " If you use an IOS device, please choose "Airplay ", and then wait for the device connection. If you use an Android device, please choose "Miracast ", and wait for the device connection. AirpalyMiracast Network settings W13-M 6FUHHQ0LUUHULQJ6FUHHQ0LUUHULQJ 0DUVE\WH;;;;                                        ! "# !$         %      &   ' (    )  *+,( &   !    '      !  "    ! , ! %    -     Airpaly Miracast Network settings W13-M 7 For Android device, slide the phone interface from the up to bottom to enter the control center, then click on "WirelessProjection" /"Multi-screen" /"Screen sharing", (Different mobile phone models for different expressions) Make sure that your IOS/Android device connect with the same network your projector. W13-M 8 For IOS device, open Control Center and tap Screen Mirroring .  What devices can use the wireless connection? 1. IOS devices are only suitable for iPhone, and Ipad; 2. Android devices are only suitable for smartphones, and tablets; 3. Not suitable for any laptop. Looking for devices that can be mirrored on. Waiting for the connection.Select W13-M on the list. 9 Operation on the projector Signal source >MCAST >Network settings >Wire- less> Connect the WIFI>Select Airplay (IOS) /Select Miracast (Android) Operation on the IOS/ Android device connects with same WIFI>Control Center>Screen Mirroing >Waiting connection> Select W13-M 2. Connect HDMI Devices Using the HDMI cable in the package to connect with projector. (HDMI connection is recommended for projecting movies, videos, and other files which need to be HD.) Add:Different brand laptop output keys are as follows: Fujitsu Haier NEC Panasonic Sharp Hitachi TOSHIBA Lenovo Fn+F3 Fn+F8 Fn+F4 Fn+F7 Fn+F8 Fn+F5 Fn+F4 Fn+F7 Fn+F10 Fn+F3 Fn+F3 Fn+F3 Fn+F5 Fn+F7 Fn+F5 Dell HP ThinkPad Asus Acer Samsung Sony 10 Turn on your laptop and the projector. Connect the HDMI cable to your laptop's HDMI port. Connect the other end to any available HDMI port on your projector. Press " " of remote control to enter the interface of Input Source. Select HDMI source to project any files on your computer. On your laptop, hold down the key"WIN+P" board keys to change your display mode, select "Duplicate". 1 2 3 4 5 6 3. Connect Smartphone For IOS devices By using a lightning to HDMI/USB adapter(lighting to HDMI cable adapter), you can connect your iOS device to this projector easily(NOT INCLUDE ADAPTER) For Android devices This projector allows you connect to your Android mobile- phone with micro USB /type C to HDMI/USB(NOT INCLUDE ADAPTER) The user of windows 7 or over windows 7. Simply press the +P, select “Duplicate” to connect. If the operation above is invalid, Please update the computer graphics dr…

Text truncated - open the document above for the full version.

Oley Company Limited Family models declaration letter. 2022-12-20 We Oley Company Limited Of 3F,2nd Building B District, Honggao Industrial Park , Songbai Road, ShiYan Street,Shenzhen City, Guangdong Province, China Product: Projector Model Name: W13 Serial Model: BL128,W13-S,W13-M,W13MINI,W13PLUS,A1,A2,A3,M1,M2,M3,M8,G1,G2,G3, V16 All the model are the same circuit and RF module,except model names. Thanks Sincerely, Signature Name: SNOW WANG Date: 2022-12-20 Title: Manager

Oley company limited Agent Authorization Letter (2022/12/20) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen ZKT Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature : Client’s name / title : SNOW WANG / Manager Contact information / address: 3F,2nd Building B District, Honggao Industrial Park , Songbai Road, Shenzhen City, Guangdong Province, China

Oley company limited Long Term Confidentiality Request Letter (2022-12-20) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR(projector / W13,BL128,W13-S,W13- M,W13MINI,W13PLUS,A1,A2,A3,M1,M2,M3,M8,G1,G2,G3,V16 / FCC ID:2AS7X- W13) To Whom It May Concern: - This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature : Client’s name / title : SNOW WANG/ Manager Contact information / address: 3F,2nd Building B District, Honggao Industrial Park, Songbai Road, Shenzhen City, Guangdong Province, China

4cm Model: W13 FCC ID: 2AS7X-W13 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may causeundesired operation. Label Location 2cm

WIFI ANT BT ANT

RF Exposure Report FCC ID: 2AS7X-W13 The EUT is a Projector in the 2412~2462MHz and 2402-2480MHz frequency band. According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 f/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 f/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz MPE calculation method Calculation Method of RF Safety Distance: S: power density mW/ cm 2 ; P: power input to the antenna in mW; g: numeric gain of antenna; r: distance to centre of radiation in cm Calculated result Mode Max. Peak output power (dBm) Max tune up RF power (dBm) Max tune up RF power (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm 2 ) Limit of Power Density (S) (mW/ cm 2 ) 802.11b 14.31 14±1 31.62 1.995 0.012557 1 802.11g 12.86 12±1 19.95 1.995 0.007923 1 802.11n20 11.63 11±1 15.84 1.995 0.006293 1 802.11n40 10.57 10±1 12.58 1.995 0.004999 1 Note1: the antenna gain is 3.0dBi; Note2: Calculated distance is 20cm, which is declared by the manufacture.

1 SUPPLIER PREPAREDBYCHECKEDBYAPPROVEDBY marfanYangQuanshengMaDongdong CUSTOMER ACCEPTEDBYCHECKEDBYAPPROVEDBY ShenZhenCityFeiMinTechnologyCO.,LTD. SPECIFICATIONFORAPPROVED CUSTOMER:ShenzhenRuijiangTechnologyCo.,Ltd PRODUCTS:6710WFPCantenna PARTNO: Spec.:FM-S2117-6710W（150mm） Data:2022.12.14 REMARK:Pleasesendusone(orcopy)ofthisapprovalwithstampafteraccepting,othercopiesfiledby thecustomer. ADD:Room303,BuildingC,HengnanoneRoad,Gushucommunity,XixiangStreet,Bao’anDistrict,Shenzhen City Tel:0755-23035723Fax:0755-23036702 E-mail:[email protected]:www.fmant.cn ANTENNASPECIFICATION ShenzhenFeiminTechnologyCo.,Ltd 2 目录 SPECIFICATIONFORAPPROVED ....................................................................................................... 1 1.ProjectInformation....................................................................................4 1.1.AppearanceandDimensions.............................................................4 2.ElectricalCharacteristics.........................................................................5 2.1.TestEnvironmentConditions...........................................................5 2.2.Measurementmethod........................................................................5 2.2.1.AntennaVSWR ........................................................................... 5 2.2.2.AntennaReturnloss ........................................................... 6 2.3.Antennapassivetestdata ................................................ 6 2.3.1.Testsystem ............................................................................... 6 2.3.2Antennaefficiencyandgain ........................................... 7 2.3.2.AntennaRadiationPattern ................................................... 8 3.Notes............................................................................................................9 4.Productpackagingspecification.................................................................9 ShenzhenFeiminTechnologyCo.,Ltd 3 ANTENNASPECIFICATION Revisionhistory editiondatestate A12022-12-14Firstedition Changecontent:thefirstchange: Beforechange:(Ifnecessary,pleaseaddcorrespondingpictures,andthechangedetailshereshouldbe clearlydescribed) Afterchange:(Ifnecessary,pleaseaddcorrespondingpictures,andthechangedetailshereshouldbe clearlydescribed) ShenzhenFeiminTechnologyCo.,Ltd 4 ANTENNASPECIFICATION 1.ProjectInformation 1.1.AppearanceandDimensions ShenzhenFeiminTechnologyCo.,Ltd 5 ANTENNASPECIFICATION 2.ElectricalCharacteristics 2.1.TestEnvironmentConditions TemperatureOrdinaryTemperature(5to35°C) HumidityOrdinaryHumidity(25to85%RH) 2.2.Measurementmethod 2.2.1.AntennaVSWR ShenzhenFeiminTechnologyCo.,Ltd 6 ANTENNASPECIFICATION 2.2.2.AntennaReturnloss 2.3.Antennapassivetestdata 2.3.1.Testsystem ShenzhenFeiminTechnologyCo.,Ltd.(24probeOTAmicrowaveanechoicchamber) ShenzhenFeiminTechnologyCo.,Ltd 7 ANTENNASPECIFICATION 2.3.2Antennaefficiencyandgain Frequency(MHz)Gain(dBi)Efficiency(%) 2400MHz2.3442.37 2410MHz2.2745.14 2420MHz2.445.5 2430MHz2.145.72 2440MHz2.8443.43 2450MHz2.6445.77 2460MHz347.41 2470MHz2.5748.57 2480MHz2.4446.47 2490MHz2.5747.46 2500MHz2.5145.57 5150MHz2.5553.5 5200MHz2.955.7 5250MHz3.4553..47 5300MHz455.64 5350MHz3.1753.59 5400MHz3.2752.27 5450MHz3.3155.33 5500MHz3.2754.18 5550MHz3.2752.75 5600MHz3.2850.69 5650MHz3.5155.87 5700MHz3.7453.96 5750MHz3.1752.82 5800MHz3.2352.45 5850MHz3.4552.53 ShenzhenFeiminTechnologyCo.,Ltd 8 ANTENNASPECIFICATION 2.3.2.AntennaRadiationPattern XOY-plane@2440MHzYOZ-plane@2440MHz XOZ-plane@2440MHz3D-plane@2440MHz XOZ-plane@5750MHz YOZ-plane@5750MHz XOZ-plane@5750MHz 3D-plane@5750MHz ShenzhenFeiminTechnologyCo.,Ltd 9 ANTENNASPECIFICATION supplierShenzhenFeimin TechnologyCo.,Ltd Product name ****** Material code ************ Specificat ionand model ********** quantity***PCS CustomerName supplierShenzhenFeiminTechnologyCo.,Ltd OrderNo************* Material code ************* Specificat ionand model ******Product name ******* quantity*****PCS检验 Spare parts ***PCS备注 Productname:2.4Gantenna Antennaform:shieldedwire+FPC 1、Labelrequirements Theinnerlabelis7CMlongand about4CMwide Thelengthoftheouterlabelis7cm,about5cm 2、Packingprocess 1.Jobdescription: ProductPCSshallbepackedinPEopenbags,andeachsmallbag shallbeattachedwithaninternallabel;Putthesmallbaginto thelargePEsealingtapebag,exceptthemantissaandspare parts.Eachboxispackedwithlargebagsofproducts,andthebox issealedwithadhesivetapeintheshapeof"I". Stickanexternallabelontheupperrightcorneroftheboxto avoidmissingorwrongfilling. 3、Precautions Whenpacking,payattentiontotheflatplacementofthe antenna.Aftersealing,thereshouldbenoseriousshaking.If thewholeboxisnotfilled,itshouldbefilledwithfoamto avoidbadproductsduringtransportation. 3.Notes 1.Becarefulnottobetooclosetothemetalpartduringinstallationtoavoidaffecting theantennaperformance. 2.Thisantennaisonlyapplicabletothismodel,andthepositionoftheantennacannotbe changedatwill.Ifitisusedonothermachines,theeffectwillbecomeworse,whichhas nothingtodowithourcompany. 3.Thedatausedinthisacknowledgment(suchasantennaefficiency,gain,etc.)arethe dataobtainedfromthetestoftheproject/antennainthelaboratoryofShenzhenFeimin TechnologyCo.,Ltd 4.Productpackagingspecification product

Project No.:ZKT-221205L9039E-2 Page 1 of 60 FCC TEST REPORT FCC ID:2AS7X-W13 Report Number. .............................. : ZKT-221205L9039E-2 Date of Test ................................................. : Dec. 05 to Dec. 14, 2022 Date of issue .................................... : Dec. 14, 2022 Total number of pages ...................... 60 Test Result ....................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : Oley Company Limited Address .......................................... : 3F,2nd Building B District, Honggao Industrial Park , Songbai Road, ShiYan Street,Shenzhen City, Guangdong Province, China Manufacturer's name ................... : Oley Company Limited Address .......................................... : 3F,2nd Building B District, Honggao Industrial Park , Songbai Road, ShiYan Street,Shenzhen City, Guangdong Province, China Test specification: Standard .......................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2013 Test procedure ................................. : / Non-standard test method ............. : N/A Test Report Form No. .................... : TRF-EL-110_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2022-12-05 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Projector Trademark ...................................... : N/A Model/Type reference ...................... : W13,BL128,W13-S,W13-M,W13MINI,W13PLUS,A1,A2,A3,M1,M2, M3,M8,G1,G2,G3,V16 Ratings ............................................. : AC100-240V,50/60Hz Project No.:ZKT-221205L9039E-2 Page 2 of 60 Testing procedure and testing location: Testing Laboratory ..................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Alen He Tested by (name + signature) .................... : Joe Liu Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.:ZKT-221205L9039E-2 Page 3 of 60 Table of Contents Page 1. VERSION ..................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 TEST FACILITY ............................................................................................................... 7 2.2 MEASUREMENT UNCERTAINTY ................................................................................... 7 3. GENERAL INFORMATION .......................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT................................................................................. 8 3.2 DESCRIPTION OF TEST MODES ................................................................................... 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED ................ 9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ......................................... 9 3.5EQUIPMENTS LIST FOR ALL TEST ITEMS .................................................................. 11 4. EMC EMISSION TEST ............................................................................................... 13 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................. 13 4.1.1 POWER LINE CONDUCTED EMISSION Limits ................................................... 13 4.1.2 TEST PROCEDURE .............................................................................................. 13 4.1.3 DEVIATION FROM TEST STANDARD .................................................................. 13 4.1.4 TEST SETUP ......................................................................................................... 14 4.1.5 EUT OPERATING CONDITIONS ........................................................................... 14 4.1.6 TEST RESULT ....................................................................................................... 15 4.2 RADIATED EMISSION MEASUREMENT ...................................................................... 17 4.2.1 RADIATED EMISSION LIMITS .............................................................................. 17 4.2.2 TEST PROCEDURE .............................................................................................. 17 4.2.3 DEVIATION FROM TEST STANDARD .................................................................. 18 4.2.4 TEST SETUP ......................................................................................................... 18 4.2.5 EUT OPERATING CONDITIONS ........................................................................... 19 4.2.6 TEST RESULTS .................................................................................................... 20 5.RADIATED BAND EMISSIONMEASUREMENT ........................................................ 31 5.1 TEST REQUIREMENT: .................................................................................................. 31 5.2 TEST PROCEDURE ...............................…

Text truncated - open the document above for the full version.

Test Setup Photograph Radiated Emissions Test Setup Below 1G Above 1G Conduction Emissions Test Setup