2ASCZ-GD90Digital Portable Radio

Rev.3 User's Manual Digital Radio 1 To Users Thank you for purchasing our product! This Manual is designed to make you quickly grasp use of this device. In order to avoid physical injury or property loss due to improper operation, please read this Manual carefully before using this device. Notice The device meets the requirements of FCC PART 90, PART 97 and PART 15. Local laws and regulations shall be complied with when setting up or using the equipment, and corresponding qualifications and relevant procedures shall be obtained if necessary. Consulting the relevant authorities is suggested. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Using Tips 2 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISEDC RSS warning This product meets the applicable Industry Canada technical specifications. / Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada. RF Radiation Information 1. This product is limited to occupational applications that can meet RF energy radiation requirements. The user must be fully aware of the RF radiation hazards and can take corresponding measures to meet the RF radiation limitation requirements. 2. Radio frequency (RF) refers to the electromagnetic frequency that can be radiated into space. It is a widely used technology in the fields of communication, medical treatment, and food processing. It will generate certain RF radiation during use. Safety Information In order to use the radio safely and efficiently, please read the following safety information: · The radio can only be maintained by professional technicians. Do not disassemble the radio without permission. · Only the batteries and chargers specified by our company can be used. · To avoid problems caused by electromagnetic interference and electromagnetic compatibility, please turn off the radio in places where the "Please turn off the radio" sign is displayed, such as hospitals and other health care places. When taking the flight, please turn off the radio if the crew requests to do so. Using Tips 3 Using Tips · In vehicles with airbags, do not place the radio in the area where airbag deployment may be involved. · Please turn off the radio before entering flammable or explosive environment. · Do not replace or charge the battery in a flammable or explosive environment. · Please turn off the radio before approaching the blasting area and the detonator area. · Do not use the radio with damaged antenna. A damaged antenna may cause minor burns when it comes into contact with the skin. · Do not expose the radio to direct sunlight for a long time or place it near the heating Radio. · If you wear a portable radio, make sure the antenna is at least 2.5 cm away from your body when the radio is transmitting. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: Use the approved charger to charge the battery. The remaining lithium-ion battery is limited to 30% pursuant to the new lithium battery shipment regulation approved by International Air Transport Association (IATA). Before use, charge the battery. It is recommended that the radio remain powered off during charging. Use of battery not recommend or replaced with incorrect type of battery may result in a risk of fire and explosion or personal injury. Maximum ambient temperature around the power supply equipment including charger must not exceed 40 °C (104ºF) and device operating temperature not exceed 55 °C (131ºF). 4 Using Tips RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/ controlled environment exposure limits always adhere to the following procedures. Guidelines: • Do not remove the RF Exposure Label from the device. • User awareness instructions should accompany device when transferred to other users. • Do not use this device if the operational requirements described herein are not met. Operating Instructions: • Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50 % of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). • Hold the radio in a vertical position in front of face with the microphone (and the other parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important because RF exposures decrease with distance from the antenna. Antenna should be kept away from eyes. …

Text truncated - open the document above for the full version.

Auctus Technologies Co., Ltd. 17F, Building3, China Science and Technology, Development Park, No.009, Gaoxin Road, Nanshan Dist., Shenzhen, Guangdong, China Tel: 0755-26068685 Email: [email protected] Fax: 0755-26405328 Date: 2021-07-12 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification Dear Sir/Madam, The Radio with FCC ID: 2ASCZ –GD90 was designed to operate in the frequency bands 400~470 MHz To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Auctus Technologies Co., Ltd. is requesting that the FCC lists the frequencies 400~470 MHz, under FCC Rule Part 90 on the FCC Grant. Auctus Technologies Co., Ltd. attests that the radio will not be marketed to USA users with the frequency band which is not allowed by the rule part 90. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range (MHz) FCC Rule Part 400-406 For FEDERAL 406.1-454 FCC Part 90 456-460 FCC Part 90 460-462.5375 FCC Part 90 462.7375-467.5375 FCC Part 90 467.7375-470 FCC Part 90 Also, equipment programming is the responsibility of Authorized Service Personnel, the radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Sincerely, Signature: enjian lv Projector Director

Auctus Technologies Co., Ltd. 17F, Building3, China Science and Technology, Development Park, No.009, Gaoxin Road, Nanshan Dist., Shenzhen, Guangdong, China Tel: 0755-26068685 Email: [email protected] Fax: 0755-26405328 Date: 2021-07-12 To: FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation statement regarding the Digital Portable Radio spectrum efficiency TYPE OF EQUIPMENT: Digital Portable Radio Model number: GD90 FCC ID: 2ASCZ – GD90 Dear Sir or Madam We, Auctus Technologies Co., Ltd. declare that the time division multiple access (TDMA) technology provides two paths in a 12.5 kHz channel bandwidth, thus meeting the one voice path per 6.25 kHz of spectrum requirement. This radio also provides data rate of 9600 bps in a 12.5 kHz channel, thus meeting the minimum data rate of 4800 bps in a 6.25 kHz channel. Please contact the undersigned if you have any questions or need any further information. Sincerely, Signature: Enjian lv Projector Director

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 1 of 9 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 2 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 3 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 4 of 9 Charger Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 5 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 6 of 9 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 7 of 9 Adapter 1 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 8 of 9 Adapter 2 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E -RF Page 9 of 9

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E-RF EXHIBIT A - FCC ID LABEL AND LOCATION Label 1 Label 2 FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) Label 1 Label 2

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E-RF Page 1 of 5 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E-RF Page 2 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E-RF Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E-RF Page 4 of 5 Charger： Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ4210621-24599E-RF Page 5 of 5

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. SAR EVALUATION REPORT For Auctus Technologies Co., Ltd. 17F, Building 3, China Science and Technology Development Park, No. 009, 1st South Gaoxin Road, Nanshan District, Shenzhen, Guangdong, China FCC ID: 2ASCZ-GD90 Report Type: Original Report Product Type: Digital Portable Radio Report Number: SZ4210621-24599E-20A Report Date: 2021-07-13 Reviewed By: Brave Lu SAR Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: SZ4210621-24599E-20A SAR Evaluation Report 2 of 31 Attestation of Test Results EUT Information EUT Description Digital Portable Radio Tested Models GD90 FCC ID 2ASCZ-GD90 Serial Number SZ4210621-24599E-SA-S1 Test Date 2021-06-25 Tested Model Max. SAR Level(s) Reported(W/kg) Limit PTT (400-470MHz) 1g Head SAR(Face Up) 3.94 8.0 (W/kg) 1g Body SAR(Body Back)5.79 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 643646 D01 SAR Test for PTT Radios v01r03 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for Occupational/Controlled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: SZ4210621-24599E-20A SAR Evaluation Report 3 of 31 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION .................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUIDELINES .................................................................................................. 6 SAR LIMITS ................................................................................................................................................................. 6 FACILITIES .................................................................................................................................................................. 7 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 8 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 13 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 13 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 14 LIQUID VERIFICATION ............................................................................................................................................... 14 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 15 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 16 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 17 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 17 CHEEK/TOUCH POSITION ........................................................................................................................................... 18 EAR/TILT POSITION ................................................................................................................................................... 18 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .............................................................................. 19 TEST DISTANCE FOR SAR EVALUATION .................................................................................................................... 19 SAR EVALUATION PROCEDURE ................................................................................................................................. 20 CONDUCTED OUTPUT POWER MEASUREMENT ....................................…

Text truncated - open the document above for the full version.

APPENDIX C PROBE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES

Report No.: SZ4210621-24599E -20A Page 1 of 12 Test Plot 1#:FM_12.5kHz_400.0125MHz_Face Up DUT: Digital Portable Radio ; Type: GD90; Serial: SZ4210621-24599E-SA-S1 Communication System: FM; Frequency: 400.012 MHz;Duty Cycle: 1:1 Medium parameters used: f = 400.012 MHz; σ = 0.845 S/m; ε r = 44.882; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: ES3DV2 - SN3019; ConvF(7.02, 7.02, 7.02) @ 400.012 MHz; Calibrated: 2020/11/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2020/11/23 • Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 5.14 W/kg Zoom Scan (5x5x4)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 73.20 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 5.60 W/kg SAR(1 g) = 4.61 W/kg; SAR(10 g) = 3.67 W/kg Maximum value of SAR (measured) = 4.80 W/kg 0 dB = 4.80 W/kg = 6.81 dBW/kg Report No.: SZ4210621-24599E -20A Page 2 of 12 Test Plot 2#: FM_12.5kHz_417.5125MHz_Face Up DUT: Digital Portable Radio ; Type: GD90; Serial: SZ4210621-24599E-SA-S1 Communication System: FM; Frequency: 417.512 MHz;Duty Cycle: 1:1 Medium parameters used: f = 417.512 MHz; σ = 0.853 S/m; ε r = 44.713; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: ES3DV2 - SN3019; ConvF(7.02, 7.02, 7.02) @ 417.512 MHz; Calibrated: 2020/11/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2020/11/23 • Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 8.86 W/kg Zoom Scan (5x5x4)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 103.9 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 9.52 W/kg SAR(1 g) = 7.83 W/kg; SAR(10 g) = 6.23 W/kg Maximum value of SAR (measured) = 8.18 W/kg 0 dB = 8.18 W/kg = 9.13 dBW/kg Report No.: SZ4210621-24599E -20A Page 3 of 12 Test Plot 3#: FM_12.5kHz_435MHz_Face Up DUT: Digital Portable Radio ; Type: GD90; Serial: SZ4210621-24599E-SA-S1 Communication System: FM; Frequency: 435 MHz;Duty Cycle: 1:1 Medium parameters used: f = 435 MHz; σ = 0.866 S/m; ε r = 44.551; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: ES3DV2 - SN3019; ConvF(7.02, 7.02, 7.02) @ 435 MHz; Calibrated: 2020/11/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2020/11/23 • Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 7.86 W/kg Zoom Scan (5x5x4)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 94.45 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 8.64 W/kg SAR(1 g) = 7.16 W/kg; SAR(10 g) = 5.72 W/kg Maximum value of SAR (measured) = 7.46 W/kg 0 dB = 7.46 W/kg = 8.73 dBW/kg Report No.: SZ4210621-24599E -20A Page 4 of 12 Test Plot 4#: FM_12.5kHz_452.4875MHz_Face Up DUT: Digital Portable Radio ; Type: GD90; Serial: SZ4210621-24599E-SA-S1 Communication System: FM; Frequency: 452.488 MHz;Duty Cycle: 1:1 Medium parameters used: f = 452.488 MHz; σ = 0.883 S/m; ε r = 44.229; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: ES3DV2 - SN3019; ConvF(7.02, 7.02, 7.02) @ 452.488 MHz; Calibrated: 2020/11/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2020/11/23 • Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 5.72 W/kg Zoom Scan (5x5x4)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 79.20 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 6.25 W/kg SAR(1 g) = 5.2 W/kg; SAR(10 g) = 4.17 W/kg Maximum value of SAR (measured) = 5.42 W/kg 0 dB = 5.42 W/kg = 7.34 dBW/kg Report No.: SZ4210621-24599E -20A Page 5 of 12 Test Plot 5#: FM_12.5kHz_469.9875MHz_Face Up DUT: Digital Portable Radio ; Type: GD90; Serial: SZ4210621-24599E-SA-S1 Communication System: FM; Frequency: 469.988 MHz;Duty Cycle: 1:1 Medium parameters used: f = 469.988 MHz; σ = 0.894 S/m; ε r = 44.124; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: ES3DV2 - SN3019; ConvF(7.02, 7.02, 7.02) @ 469.988 MHz; Calibrated: 2020/11/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2020/11/23 • Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.78 W/kg Zoom Scan (5x5x4)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 56.63 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 4.19 W/kg SAR(1 g) = 2.93 W/kg; SAR(10 g) = 2.17 W/kg Maximum value of SAR (measured) = 3.21 W/kg 0 dB = 3.21 W/kg = 5.07 dBW/kg Report No.: SZ4210621-24599E -20A Page 6 of 12 Test Plot 6#:4FSK_417.5125MHz_Face Up DUT: Digital Portable Radio ; Type: GD90; Serial: SZ4210621-24599E-SA-S1 Communication System: 4FSK; Frequency: 417.512 MHz;Duty Cycle: 1:2 Medium parameters used: f = 417.512 MHz; σ = 0.853 S/m; ε r = 44.713; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: ES3DV2 - SN3019; ConvF(7.02, 7.02, 7.02) @ 417.512 MHz; Calibrated: 2020/11/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2020/11/23 • Phantom: ELI v8.0; Type: QDOVA004AA; Serial: 2051 • Measurement SW: DASY52, Version 52.10…

Text truncated - open the document above for the full version.

Report No.: SZ4210621-24599E-20A Page 1 of 3 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Report No.: SZ4210621-24599E-20A Page 2 of 3 Face Up Setup Photo(25mm) Body Back Setup Photo(0mm) 25mm 40mm 25mm Report No.: SZ4210621-24599E-20A Page 3 of 3 Body Back With Headset Setup Photo(0mm) 25mm

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 90 TEST REPORT For Auctus Technologies Co., Ltd. 17F, Building 3, China Science and Technology Development Park, No. 009, 1st South Gaoxin R oad, Nanshan District, Shenzhen, Guangdong, China FCC ID: 2ASCZ-GD90 Report Type: Original Report Product Type: Digital Portable Radio Re port Number: SZ4210621-24599E-00 Re port Date: 2021-07-19 Reviewed B y: Jacob Kong RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West), 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: SZ4210621-24599E-00 FCC Part 90 Page 2 of 55 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC §1.1307(b) & §2.1093 - RF EXPOSURE INFORMATION ............................................................................ 10 APPLICABLE STANDARD ............................................................................................................................................ 10 TEST RESULT ............................................................................................................................................................. 10 FCC §2.1046 & §90.205 - RF OUTPUT POWER .................................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 TEST PROCEDURE ...................................................................................................................................................... 11 TEST DATA ................................................................................................................................................................ 11 FCC §2.1047 & §90.207 - MODULATION CHARACTERISTIC .......................................................................... 19 APPLICABLE STANDARD ............................................................................................................................................ 19 TEST PROCEDURE ...................................................................................................................................................... 19 TEST DATA ................................................................................................................................................................ 19 FCC §2.1049 & §90.209 & §90.210 – OCCUPIED BANDWIDTH & EMISSION MASK ................................... 25 APPLICABLE STANDARD .........................................................................…

Text truncated - open the document above for the full version.