2ASEU-CONTROLLERController

Item No. 503018Item No. 503016 1 1 2 5 6 7 2 3 4 1Power Button 2Reduce Button 3Increase Button 4Bluetooth Connect Button 5Bluetooth Indicator LED6Working Indicator LED 7Caps 1Caps25m Extension Cable Bluetooth Controller (Item No. 503018) + Ledlenser Connect App Remote Control Menu 1xClick Item No.503018 1 App Connect App Mode 2 Bluetooth Controller2023.09.061J12Axxxx Ledlenser GmbH & Co. KG Kronenstr. 5-7 • 42699 Solingen • Germany Phone +49 212/5948-0 Fax +49 212/5948-200 [email protected] www.ledlenser.com DisconnectionConnection 4. 3. 2. 1. Bluetooth Controller (Item No. 503018) Extension Cable (Item No. 503016) AF4R Work (502910) AF8R Work (502911) AF12R Work (502913) AF12C Work (502914) AT10C Work (502916) AL10R Work (502917) 1 2 FRONTBACK This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. H owever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Product NameModel No.FCC ID LampML6 Connect WL2ASEU-ML6 LampiF8R2AUMP-IF8R LampiF4R music2AUMP-IF4R LampLite Wallet Plus2ASEU-LWPLUS Remote Control Wireless Remote Control Type A2ASEU-BLE ControllerController for Area Lights2ASEU-CONTROLLER LampH7R Signature 2ASEU-21700 Batterybox Bluetooth® 21700 Batterybox 2ASEU-21700 Lamp H19R Signature 2ASEU-2X21700 Batterybox Bluetooth® 2x21700 Batterybox 2ASEU-2X21700 Lamp MH11 2AS EU-MH11 Lamp i H11R 2ASEU-MH11 LampHF8R Work 2ASEU-HF8R-Series LampHF8R Signature 2ASEU-HF8R-Series Lamp HF8R Core 2ASEU-HF8R-Series

Ledlenser Corporation Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 10/24/2023 U.S. Agent Designation Ledlenser Corporation Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2ASEU-CONTROLLER): Name and company of U.S. agent: Ledlenser Inc. Physical U.S. address of agent: 80 SE Madison St. Suite 130 Portland, OR 97214, USA FRN of U.S. agent: 0034380865 Email address of U.S. agent: [email protected] Ledlenser Inc. acknowledges their obligation to accept service of process on behalf of Ledlenser Corporation Ltd. Ledlenser Corporation Ltd. with the FRN 0028188902 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related adminis trative or judicial proc eeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature [Name] Talos lee [Title] Engineering Manager [Company] Ledlenser Corporation Ltd. Signature [Name of U.S. agent] Jeff Hutchens [Title of U.S. agent] Chief Operating Officer [Company of U.S. agent] Ledlenser Inc. 48_[model] US _Agent_2.911(d)(7) - U, V04

-LedlenserCorporationLtd.- TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB986446D01. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 10/24/23 Towhomitmayconcern: We,[LedlenserCorporationLtd.],herebycertifythattheequipmentforwhichauthorizationissought (FCCID:[2ASEU-CONTROLLER])isnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing“covered”equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(b)and(d)(5)and(6). Sincerely, Signature ZhengXiangLi SCMEngineer LedlenserCorporationLtd. 6 2 _ [ m o d e l ] C o v e r e d E q u _ 2 . 9 1 1 ( d ) ( 5 ) ( i ) a n d ( i i ) - U , V 0 2

ProjectNo.:18220WC301995Page 1 of 3 AppendixII--ExternalPhotograph ProjectNo.:18220WC301995Page 2 of 3 ProjectNo.:18220WC301995Page 3 of 3

ZONE REV. DESCRIPTION DATEEDITED BY WEIGHT(g) LL-QP-013 02 B- 10321 B 12310 39.6 P ro duct NO. N O. ① This drawing is a ppl i cable to f o ll o wi ng p ro d uc t NO . Technical requirements: The laser content should be clear and easy to read, no ghosting, color difference, tilt; 2 DIN Next LT Pro Typeface: DIN Next LT Pro; 3 Product DataMatrix code(Ten digits) and related serial number(Ten digits) is generated automatically by LL IT Laser code serial number query system after inputting purchasing order number during production, and need to be correlated with system: 4 ：Product serial number YYMMXXXXXX,the rules as following: YY represents year (last two digits), MM represents month (two digits) XXXXXX represents random number (six digits, can not be reused):đ Product DataMatrix code format is Data matrix must be clear and easy to be scan and identified, used for, product anti-counterfeiting traceability, and can not be reused: 7 Require reasonable package to protect components; 8 :SIP Inspection standard according to :SIP document,the part must meet the HSF Control Guidline requirements; 9 , , - represents importance dimensions, represents critical dimensions, - are modify areas.⑨①★★★ Controller主壳（蓝牙版黑色+激光） 1F02L0969 Controller-01 PC 2014-T S2 mm Sheet 2 of 2 比例 1：1 1:1 S2 1 更新激光内容 2023/10/8 谭永星 53.0 mm Controller Made in China Ledlenser GmbH & Co. KG, Kronenstr. 5-7, 42699 Solingen, Germany FCC ID: 2ASEU-CONTROLLER Approved 220-JP6624 Ledlenser UK Ltd, Kingswick House, Sunninghill SL5 7BH, UK 1 1 . 4 m m 12.5 mm 3 9 . 5 m m R-R-Smg-Controller Controller Made in China Ledlenser GmbH & Co. KG, Kronenstr. 5-7, 42699 Solingen, Germany FCC ID: 2ASEU-CONTROLLER Approved 220-JP6624 Ledlenser UK Ltd, Kingswick House, Sunninghill SL5 7BH, UK R-R-Smg-Controller Controller Made in China Ledlenser GmbH & Co. KG, Kronenstr. 5-7, 42699 Solingen, Germany FCC ID: 2ASEU-CONTROLLER Approved 220-JP6624 Ledlenser UK Ltd, Kingswick House, Sunninghill SL5 7BH, UK R-R-Smg-Controller

ProjectNo.:18220WC301995Page 1 of 3 AppendixIII--InternalPhotograph ProjectNo.:18220WC301995Page 2 of 3 ANT ProjectNo.:18220WC301995Page 3 of 3

RFEXPOSUREEVALUATION FCCID:2ASEU-CONTROLLER AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 2402-2.88-2.88 ±1 -1.8850.201 3 GFSK 2440-3.34-3.34 ±1 -2.3450.182 3 2480-4.42-4.42±1-3.4250.143 3 Result:NoStandaloneSARtestisrequired.

Page1of23 AppendixTestData ReportNo.:18220WC30199501TestSampleNo.:1-2-2 StartTestDate: 2023.09.12 FinishTestDate:2023.09.14 TestEngineer:Auditor: Temperature:25.3 °C RelativeHumidity:48% Pressure:102kPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz] DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt1 24020.6882401.6362402.3240.5PASS 24400.6722439.6602440.3320.5PASS 24800.6722479.6562480.3280.5PASS Page2of23 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page3of23 Page4of23 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaFrequency[MHz] OCB[MHz] FL[MHz]FH[MHz] BLE_1MAnt1 24021.04542401.47662402.5220 24401.04862439.47302440.5216 24801.05612479.47342480.5295 Page5of23 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page6of23 Page7of23 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntennaFrequency[MHz] ConductedPeak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt1 2402-2.88≤30PASS 2440-3.34≤30PASS 2480-4.42≤30PASS Page8of23 TestGraphsPeak BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page9of23 Page10of23 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt1 2402-18.25≤8.00PASS 2440-18.74≤8.00PASS 2480-19.93≤8.00PASS Page11of23 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page12of23 Page13of23 AppendixE:Bandedgemeasurements TestResult TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 Low2402-3.08-51.3≤-23.08PASS High2480-4.50-56.76≤-24.5PASS Page14of23 TestGraphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 Page15of23 AppendixF:ConductedSpuriousEmission TestResult TestMod e Antenn a Frequency[MHz ] FreqRange [MHz] RefLeve l [dBm] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 2402 Reference-3.87-3.87---PASS 30~1000-3.87-69.23≤-23.87PASS 1000~2650 0 -3.87-35.55≤-23.87PASS 2440 Reference-3.91-3.91---PASS 30~1000-3.91-69.59≤-23.91PASS 1000~2650 0 -3.91-35.7≤-23.91PASS 2480 Reference-5.36-5.36---PASS 30~1000-5.36-69.27≤-25.36PASS 1000~2650 0 -5.36-38.13≤-25.36PASS Page16of23 TestGraphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 Page17of23 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 Page18of23 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference Page19of23 BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 Page20of23 Page21of23 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] BLE_1MAnt1 24020.400.6363.491.97 24400.400.6363.491.97 24800.400.6363.491.97 Page22of23 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page23of23 ---End---

ReportNo.:18220WC30199501FCCID:2ASEU-CONTROLLERPage1of33 FCCTestReport Applicant:LedlenserCorporationLtd. Address: No.25,Yudong1Road,DongchengTown YangdongDistrict,Yangjiang,GuangDong, 529931,China ProductName:Controller ReportDate:Oct.18,2023 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC30199501FCCID:2ASEU-CONTROLLERPage2of33 Contents 1.GeneralInformation.................................................................................................................................6 1.1.ClientInformation...........................................................................................................................6 1.2.DescriptionofDevice(EUT)..........................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest..........................................................................................7 1.4.Operationchannellist....................................................................................................................8 1.5.DescriptionofTestModes.............................................................................................................8 1.6.MeasurementUncertainty.............................................................................................................8 1.7.TestSummary................................................................................................................................9 1.8.DescriptionofTestFacility...........................................................................................................10 1.9.Disclaimer....................................................................................................................................10 1.10.TestEquipmentList....................................................................................................................11 2.Antennarequirement..............................................................................................................................13 2.1.Conclusion...................................................................................................................................13 3.ConductedEmissionatACpowerline..................................................................................................14 3.1.EUTOperation.............................................................................................................................14 3.2.TestSetup....................................................................................................................................14 3.3.TestData......................................................................................................................................15 4.OccupiedBandwidth..............................................................................................................................17 4.1.EUTOperation.............................................................................................................................17 4.2.TestSetup....................................................................................................................................17 4.3.TestData......................................................................................................................................17 5.MaximumConductedOutputPower......................................................................................................19 5.1.EUTOperation.............................................................................................................................19 5.2.TestSetup....................................................................................................................................19 5.3.TestData......................................................................................................................................19 6.PowerSpectralDensity..........................................................................................................................20 6.1.EUTOperation.............................................................................................................................20 6.2.TestSetup....................................................................................................................................20 6.3.TestData......................................................................................................................................20 7.Emissionsinnon-restrictedfrequencybands.......................................................................................21 7.1.EUTOperation.............................................................................................................................21 7.2.TestSetup....................................................................................................................................21 7.3.TestData......................................................................................................................................21 8.Bandedgeemissions(Radiated)..........................................................................................................22 8.1.EUTOperation.............................................................................................................................22 8.2.TestSetup....................................................................................................................................22 8.3.TestData......................................................................................................................................23 9.Emissionsinfrequencybands(below1GHz).......................................................................................25 9.1.EUTOperation.............................................................................................................................25 9.2.TestSetup.....................................…

Text truncated - open the document above for the full version.

version01 LedlenserCorporationLtd. DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:Controller FCCID:2ASEU-CONTROLLER fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsforinternalantennatype(s) describedbelow: ModelNo.ofantenna:1B99A0044 Typeofantenna:CeramicsAntenna Gainoftheantenna:2.7dBi Frequencyrange:2402-2480MHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname:LedlenserCorporationLtd. Address:No.25,Yudong1Road,DongchengTownYangdongDistrict,Yangjiang, GuangDong,529931,China City:Yangjiang ZIP/Postalcode:/ Country:China Place:YangjiangDate:10/24/2023 Signature:

LLC ABRACON IS ISO9001-2015 CERTIFIED 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 06.21.2018 ACAG0201-2450-T MSL = 1 Pb ELECTRICAL CHARACTERISTICS FEATURESAPPLICATIONS Item VSWR • • • • MECHANICAL DIMENSIONS (mm) Unit: mm GND PI Type Mat ching Network Feeding Line Clearance Area GND VIA 3.0 5.0 1.15 1.20 1.40 0.55 0.55 Antenna Dimensions Layout Dimensions LLC ABRACON IS ISO9001-2015 CERTIFIED 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 06.21.2018 ACAG0201-2450-T MSL = 1 Pb ANTENNA RESPONSE – SMITH CHART AND RETURN LOSS S11 EVALUATION BOARD AND MATCHING CIRCUITS 6.5nH 0.5pF LLC ABRACON IS ISO9001-2015 CERTIFIED 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 06.21.2018 ACAG0201-2450-T MSL = 1 Pb RADIATION PATTERNS Coordinates LLC ABRACON IS ISO9001-2015 CERTIFIED 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 06.21.2018 ACAG0201-2450-T MSL = 1 Pb REFLOW SOLDERING STANDARD CONDITION PACKAGING Reel (4000 pcs/Reel) Dimensions: mm MSL-1 LLC ABRACON IS ISO9001-2015 CERTIFIED 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 06.21.2018 ACAG0201-2450-T MSL = 1 Pb CAUTIONS 1. Static voltage 2. Ultrasonic cleaning 3. Soldering

ProjectNo.:18220WC301995Page 1 of 2 AppendixI--TestSetupPhotograph_RF ConductedEmissionatACpowerline Emissionsinfrequencybands(below1GHz) ProjectNo.:18220WC301995Page 2 of 2 Emissionsinfrequencybands(above1GHz)