2ASEU-H19RSERIESH19R Series Headlamp

TCB CALL página 1 File FCC ID: 2ASEU-H19RSERIES Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://secure.sos.state.or.us/ucc/searchHome TCB CALL página 2 In google maps: TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

Ledlen ser Corporation Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 6/25/2026 U.S. Agent Designation Ledlenser Corporation Ltd.acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2ASEU- H19RSERIES): Name and company of U.S. agent:Ledlenser Inc. Physical U.S. address of agent: 80 SE Madison St. Suite 130 Portland, OR 97214, USA FRN of U.S. agent: 0034380865 Email address of U.S. agent:[email protected] Ledlenser Inc. acknowledges their obligation to accept service of process on behalf of Ledlenser Corporation Ltd.. Ledlenser Corporation Ltd. with the FRN 0028188902 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the C FR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature [Name] farmer.li [Title] Engineering Manager [Company] Ledlenser Corporation Ltd. Signature [Name of U.S. agent] Jeff Hutchens [Title of U.S . agent] Chief Operating Officer [Company of U.S. agent] Ledlenser Inc. (503) 419-8176 48_[mo del] US_Agent_2.911(d)(7) - U, V05

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 Ledlenser Corporation Ltd. TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Ledlenser Corporation Ltd. Grantee code: 2ASEU FCC ID: 2ASEU-H19RSERIES FRN: 0028188902 Contact Name: Li Zheng Xiang Address: No.25, Yudong 1 Road, Dongcheng Town Yangdong District, Yangjiang, GuangDong, 529931, China Telephone No: 13826947771 Fax No: 0662-6468781 Email: [email protected] i. [Ledlenser Corporation Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Ledlenser Corporation Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Ledlenser Corporation Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: July 28, 2026. Applicant’s Name: Li Zheng Xiang Title: SCM Engineer Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Ledlenser Corporation Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A Device H19R Series Headlamp Company name Ledlenser Corporation Ltd. Grantee code 2ASEU FCC ID 2ASEU-H19RSERIES FRN 0028188902 Contact name Li Zheng Xiang Address No.25, Yudong 1 Road, Dongcheng Town Yangdong District, Yangjiang, GuangDong, 529931, China Telephone number 13826947771 E-mail [email protected] Chipset/module information NRF52832 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 4 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Li Zheng Xiang Date: July 28, 2026.

LedlenserCorporationLtd. ProductSimilarityDeclaration Productname:H19RSeriesHeadlamp Modelname:H19RSignature,H19R,H19RPro FCCID:2ASEU-H19RSERIES We(LedlenserCorporationLtd.)herebystatethatallthemodelsare electricalidenticalincludingthesamesoftwareparameterand hardwaredesign(i.e.,circuitdesign,PCBLayout,RFmodule/circuit, antennatype(s)andantennalocation,componentsonPCB,etc.,), samemechanicalstructureanddesign(includingproductmaterials, etc.,),Differentaccessoriesareshipped. Formoredetailedinformation,pleaseseethetablebelow. H19RSignatureH19RH19RPro photo Factory default mode memorymodeMidPower(8h)MidPower(8h) Shipped parts ShipmentincludesTYPE-C cableand26H-15R-S extensioncable ShipmentincludesTYPE-C cable ShipmentincludesTYPE-C cable headband color White+SilverWhite+YellowWhite+Silver Headband material RecycledwebbingRecycledwebbingRecycledpolyester+ spandex+silicone Signature: Name:LiZhengXiang Title:SCMEngineer 2026/7/28

C5266091_X10_Ed.2 1/1 LedlenserCorporationLtd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2026-07-28 Subject:RequestforConfidentiality FCCID:2ASEU-H19RSERIES ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-TermConfidentiality NOTE2 IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo ☒ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☒ User’sManual ☐ NOTE 1 ☒ InternalPhotos ☐ NOTE 1 ☒ PartsList/TuneUp ☐☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☐ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselectedabove arewithheldfrompublicviewforaperiodof___180___daysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name:LiZhengXiang Title:SCMEngineer 2026/7/28

C5266091_X8_Ed.1 1/1 Letter of Authorization Ledlenser Corporation Ltd. Company: Ledlenser Corporation Ltd. Address: No.25, Yudong 1 Road, Dongcheng Town Yangdong District, Yangjiang, GuangDong, 529931, China Product Name: H19R Series Headlamp Model Number: H19R Signature, H19R, H19R Pro FCC Identifier: 2ASEU-H19RSERIES We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Li Zheng Xiang Date: July 28, 2026. Title: SCM Engineer Signature of applicant:

LabelLocation Confirmtheuseofrealappearancephotosasreferences Labelsize: （ L:3cm*W:2cm ） H19R Label: H19RProLabel ： H19RSignatureLabel ：

RFEXPOSUREEVALUATION FCCID:2ASEU-H19RSERIES AccordingtoKDB447498D01MobileandPortableDevicesRFExposureProcedures andEquipmentAuthorizationPoliciesv06. AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiationas specifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnotrequired, portabletransmitterswithoutputpowergreaterthantheapplicablelowthresholdrequire SARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 2402-6.30-6.30±1-5.30050.0913 GFSK2440-8.20-8.20 ±1 -7.20050.0603 2480-9.58-9.58±1-8.58050.0443 Result:NoStandaloneSARtestisrequired.

Page 1 of 34 FCC Test Report Report No.:1818C60041512501 Applicant:Ledlenser Corporation Ltd. Address: No.25, Yudong 1 Road, Dongcheng Town Yangdong District, Yangjiang, GuangDong, 529931, China Product Name:H19R Series Headlamp Report Date:2026-07-28 Shenzhen Anbotek Compliance Laboratory Limited #检测章# #资质章# #报告二维码# Report No.:1818C60041512501Page 2 of 34 FCC ID: 2ASEU-H19RSERIES Contents 1. General Information ...............................................................................................................................6 1.1. Client Information ........................................................................................................................6 1.2. Description of Device (EUT) ........................................................................................................6 1.3. Auxiliary Equipment Used During Test........................................................................................7 1.4. Operation channel list..................................................................................................................7 1.5. Description of Test Modes...........................................................................................................7 1.6. Measurement Uncertainty ...........................................................................................................8 1.7. Additional Instructions .................................................................................................................8 1.8. Test Summary .............................................................................................................................9 1.9. Description of Test Facility ........................................................................................................10 1.10. Disclaimer................................................................................................................................10 1.11. Test Equipment List.................................................................................................................11 2. Antenna requirement ...........................................................................................................................13 2.1. Conclusion.................................................................................................................................13 3. Conducted Emission at AC power line ................................................................................................14 3.1. EUT Operation ..........................................................................................................................14 3.2. Test Setup .................................................................................................................................14 3.3. Test Data ...................................................................................................................................15 4. 6dB Bandwidth ....................................................................................................................................17 4.1. EUT Operation ..........................................................................................................................17 4.2. Test Setup .................................................................................................................................17 4.3. Test Data ...................................................................................................................................18 5. Maximum Conducted Output Power....................................................................................................19 5.1. EUT Operation ..........................................................................................................................19 5.2. Test Setup .................................................................................................................................19 5.3. Test Data ...................................................................................................................................19 6. Power Spectral Density .......................................................................................................................20 6.1. EUT Operation ..........................................................................................................................20 6.2. Test Setup .................................................................................................................................20 6.3. Test Data ...................................................................................................................................20 7. Emissions in non-restricted frequency bands ......................................................................................21 7.1. EUT Operation ..........................................................................................................................21 7.2. Test Setup .................................................................................................................................21 7.3. Test Data ...................................................................................................................................21 8. Band edge emissions (Radiated) ........................................................................................................22 8.1. EUT Operation ..........................................................................................................................22 8.2. Test Setup .................................................................................................................................23 8.3. Test Data ...................................................................................................................................24 9. Emissions in restricted frequency bands (below 1GHz) ....................................................…

Text truncated - open the document above for the full version.

Report No.: Ti-EE26070501-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen TEST REPORT Applicant: Ledlenser Corporation Ltd. Address: No.25, Yudong 1 Road, Dongcheng Town, Yangdong District, Yangjiang City, GD, 529931, China Equipment Type: Patched antenna Model Name: ACAG0201-2450-T Brand Name: N/A Test Standard: IEEE Std 149-2021 Sample Arrival Date: Jul. 14, 2026 Test Date: Jul. 15, 2026 Date of Issue: Jul. 22, 2026 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Xia Long Approved by: Tolan Tu (Technical Director) _______________ _______________ _______________ Report No.: Ti-EE26070501-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen Revision History Version Issue Date Revisions Rev. 01 Jul. 22, 2026 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory .................................................................................................................. 3 1.2 Test Location ...................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information .......................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................ 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards ................................................................................................................... 5 3.2 Test Verdict ........................................................................................................................ 5 3.3 Test Uncertainty ................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition .................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................ 6 4.3 Test Setup .......................................................................................................................... 7 4.4 Test Frequencies ................................................................................................................ 7 ANNEX A TEST RESULTS .......................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 A.2 VSWR ................................................................................................................................. 9 ANNEX B RADIATION PATTERN ............................................................................................. 10 ANNEX C TEST SETUP PHOTOS ............................................................................................ 13 ANNEX D EUT PHOTO.............................................................................................................. 13 Report No.: Ti-EE26070501-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location 1/F., Building B, Ganghongji High-Tech Intelligent Industrial Park, No.1008, Songbai Road, Yangguang Community, Xili Subdistrict, Nanshan District, Shenzhen, Guangdong Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen, Guangdong Report No.: Ti-EE26070501-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Ledlenser Corporation Ltd. Address No.25, Yudong 1 Road, Dongcheng Town, Yangdong District, Yangjiang City, GD, 529931, China 2.2 Manufacturer Information Manufacturer Abracon Address 12117 BEE CAVES RD BLDG-3 STE 200 BEE CAVE, TEX 78738 2.3 General Description for Equipment under Test (EUT) EUT Name Patched antenna Model Name Under Test ACA…

Text truncated - open the document above for the full version.

ReportNo.:1818C60041512501-01 Page 1 of 22 AppendixTestData ReportNo.:1818C60041512501-01TestSampleNo.:1-2-2 StartTestDate:2026-4-15FinishTestDate:2026-4-22 TestEngineer:Auditor: Temperature:23 °C RelativeHumidity:55% Pressure:101kPa AppendixA:6dBBandwidth TestResult Test Mode AntennaFrequency[MHz] 6dBBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt124020.6722401.6722402.3440.5PASS BLE_1MAnt124400.6962439.6562440.3520.5PASS BLE_1MAnt124800.6882479.6602480.3480.5PASS ReportNo.:1818C60041512501-01 Page 2 of 22 TestGraphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS ReportNo.:1818C60041512501-01 Page 3 of 22 BLE_1M-Ant1-2480-PASS ReportNo.:1818C60041512501-01 Page 4 of 22 AppendixB:99%OccupiedBandwidth TestResult Test Mode AntennaFrequency[MHz] OCB [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt124021.05382401.48872402.5425------ BLE_1MAnt124401.05642439.48372440.5401------ BLE_1MAnt124801.06222479.47902480.5412------ ReportNo.:1818C60041512501-01 Page 5 of 22 TestGraphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 ReportNo.:1818C60041512501-01 Page 6 of 22 BLE_1M-Ant1-2480 ReportNo.:1818C60041512501-01 Page 7 of 22 AppendixC:Maximumconductedoutputpower TestResultPeak Test Mode Antenna Frequency [MHz] Conducted Peak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt12402-6.30≤30PASS BLE_1MAnt12440-8.20≤30PASS BLE_1MAnt12480-9.58≤30PASS TestGraphsPeak BLE_1M-Ant1-2402-PASS ReportNo.:1818C60041512501-01 Page 8 of 22 BLE_1M-Ant1-2440-PASS BLE_1M-Ant1-2480-PASS ReportNo.:1818C60041512501-01 Page 9 of 22 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt12402-21.88≤8.00PASS BLE_1MAnt12440-23.73≤8.00PASS BLE_1MAnt12480-25.23≤8.00PASS ReportNo.:1818C60041512501-01 Page 10 of 22 TestGraphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS ReportNo.:1818C60041512501-01 Page 11 of 22 BLE_1M-Ant1-2480-PASS ReportNo.:1818C60041512501-01 Page 12 of 22 AppendixE:Bandedgemeasurements TestResult Test Mode AntennaChName Frequency [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict BLE_1MAnt1Low2402-6.61-53.87≤-26.61PASS BLE_1MAnt1High2480-9.71-56.5≤-29.71PASS ReportNo.:1818C60041512501-01 Page 13 of 22 TestGraphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2480-PASS ReportNo.:1818C60041512501-01 Page 14 of 22 AppendixF:ConductedSpuriousEmission TestResult Test Mode Antenna Frequency [MHz] Freq.Range [MHz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict BLE_1MAnt124020~Reference-6.49-6.49---PASS BLE_1MAnt1240230~1000-6.49-63.58≤-26.49PASS BLE_1MAnt124021000~26500-6.49-35.1≤-26.49PASS BLE_1MAnt124400~Reference-8.50-8.50---PASS BLE_1MAnt1244030~1000-8.50-62.88≤-28.5PASS BLE_1MAnt124401000~26500-8.50-35.25≤-28.5PASS BLE_1MAnt124800~Reference-9.96-9.96---PASS BLE_1MAnt1248030~1000-9.96-63.32≤-29.96PASS BLE_1MAnt124801000~26500-9.96-35.17≤-29.96PASS Remark:Regardingthespuriousemissionsfrom30MHzto26.5GHz,thecablelosshavebeensetinthe 'InputCorrection'oftheSpectrumAnalyzerduringthetest. ReportNo.:1818C60041512501-01 Page 15 of 22 TestGraphs BLE_1M-Ant1-2402-0~Reference-PASS BLE_1M-Ant1-2402-30~1000-PASS ReportNo.:1818C60041512501-01 Page 16 of 22 BLE_1M-Ant1-2402-1000~26500-PASS BLE_1M-Ant1-2440-0~Reference-PASS ReportNo.:1818C60041512501-01 Page 17 of 22 BLE_1M-Ant1-2440-30~1000-PASS BLE_1M-Ant1-2440-1000~26500-PASS ReportNo.:1818C60041512501-01 Page 18 of 22 BLE_1M-Ant1-2480-0~Reference-PASS BLE_1M-Ant1-2480-30~1000-PASS ReportNo.:1818C60041512501-01 Page 19 of 22 BLE_1M-Ant1-2480-1000~26500-PASS ReportNo.:1818C60041512501-01 Page 20 of 22 AppendixG:DutyCycle TestResult Test Mode Antenna Frequency [MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] BLE_1MAnt124020.380.6261.292.13 BLE_1MAnt124400.390.6361.902.08 BLE_1MAnt124800.390.6361.902.08 ReportNo.:1818C60041512501-01 Page 21 of 22 TestGraphs NTNV-BLE_1M-Ant1-2402 NTNV-BLE_1M-Ant1-2440 ReportNo.:1818C60041512501-01 Page 22 of 22 NTNV-BLE_1M-Ant1-2480 ---End---