2ASFYMM07MHINBL0000WIRELESS MOUSE

Wireless RGB Gaming Mouse Quick Start Guide 1 Left Key 2 Right Key 3 Scroll Wheel 4 Profile Switch 5 Forward Button 6 Backward Button 7 Slide Switch: Wireless Mode/ Power Saving Mode/Off 8 Dongle Storage Product Overview Package Contents 1 Mad Catz M.O.J.O M2 x1 2 QSG x1 3 Warranty Card x1 4 Logo Sticker x1 • DPI: 400 / 800 (Default) / 1200 / 2400 / 3200 / 6400. Up to 16000 DPI via software DPI Level: 5 • 1. Take out the dongle stored at the back of M.O.J.O M2 2. Plug in the dongle to PC 3. Slide the switch on the back of M.O.J.O M2 4. 3 modes available, wireless mode/power saving mode/Off Wireless Connection • DPI: 400 / 800 (Par défaut) / 1200 / 2400 / 3200 / 6400. Jusqu’à 16000 DPI via logiciel Niveau de DPI : 5 • 1 Touche Gauche 2 Touche Droite 3 Molette Centrale de Défilement 4 Switch de Changement de Profil 5 Bouton Avant 6 Bouton de Retour en Arrière 7 Switch de Défilement : Mode Sans-fil / Mode d'Économie d'Énergie / Désactivé 8 Compartiment Pour Clé USB Sans-fil Aperçu du Produit Contenu du Paquet 1 Mad Catz M.O.J.O. M2 x1 2 QSG x1 3 Carte de Garantie x1 4 Sticker Logo x1 1. Retirez la clé USB sans-fil stockée à l'arrière de M.O.J.O. M2 2. Branchez cette dernière sur votre PC 3. Faites glisser l'interrupteur à l'arrière de M.O.J.O. M2 4. 3 modes disponibles : Mode Sans-fil/Mode Économie d'Énergie/Arrêt %QPPGZKQP5CPUsN 1 Linkstaste 2 Rechtstaste 3 Scrollrad 4 Profilschalter 5 Vorwärtstaste 6 Rückwärtstaste 7 Schiebeschalter: Drahtlosmodus/ Energiesparmodus/ Aus 8 Dongle-Aufbewahrung Produktübersicht Lieferumfang 1 Mad Catz M.O.J.O. M2 x1 2 Kurzanleitung x 1 3 Garantiekarte x 1 4 Logo-Sticker x 1 1. Nehmen Sie den Dongle aus seiner Aufbewahrung auf der Rückseite des M.O.J.O M2 heraus 2. Schließen Sie den Dongle an den PC an 3. Verschieben Sie den Schalter auf der Rückseite des M.O.J.O M2 4. 3 Modi sind verfügbar: Drahtlosmodus/ Energiesparmodus/ Aus Drahtlosverbindung • DPI: 400 / 800 (Standard) / 1200 / 2400 / 3200 / 6400. Bis zu 16000 DPI über Software DPI-Stufen: 5 • 1. Saque la llave almacenada en la parte posterior de M.O.J.O M2 2. Inserte la llave USB en su PC 3. Deslice el conmutador en la parte posterior de M.O.J.O M2 4. 3 modos disponibles: inalámbrico, ahorro de energía y apagado Conexión inalámbrica 1 Botón izquierdo 2 Botón derecho 3 Rueda de desplazamiento 4 Cambio de perfil 5 Botón Avanzar 6 Botón Retroceder 7 Conmutador deslizante: Modo inalámbrico/Modo de ahorro de energía/Desactivado 8 Almacenamiento en llave Información general del producto Contenido del paquete 1 Mad Catz M.O.J.O. M2 x1 2 Guía de inicio rápido x1 3 Tarjeta de garantía x1 4 Pegatina con el logotipo x1 • PPP: 400, 800 (valor predeterminado), 1200, 2400, 3200 y 6400. Hasta PPP de 16 000 vía software Nivel de PPP: 5 • 1 Botão direito 2 Botão esquerdo 3 Roda de deslocamento 4 Mudança de perfil 5 Botão para avançar 6 Botão para retroceder 7 Interruptor deslizante: Modo sem fios/Modo de poupança de energia/ Desligado 8 Armazenamento do adaptador Apresentação do produto Conteúdo da embalagem 1 Mad Catz M.O.J.O M2 x1 2 QSG x1 3 Certificado de garantia x1 4 Autocolante de logótipo x1 • PPP: 400 / 800 (predefinido) / 1200 / 2400 / 3200 / 6400. Até 16000 PPP através de software Nível de PPP: 5 • .KICÁºQUGOsQU 1. Retire o adaptador armazenado na parte traseira do M.O.J.O M2 2. Ligue o adaptador ao PC 3. Deslize o interruptor na parte traseira do M.O.J.O M2 4. 3 modos disponíveis, modo sem fios/modo de poupança de energia/desligado 1 ʸ̡̛̖̣̹̏̌́̌̏̌ 2 ʿ̡̛̬̣̹̌̏̌́̌̏̌ 3 ʶ̨̨̨̡̡̛̣̖̭̪̬̬̱̯ 4 ʿ̸̴̡̨̛̛̖̬̖̣̖̦̖̪̬̣̀́ 5 ʶ̨̡̦̪̌ͨʦ̪̖̬̖̔ͩ 6 ʶ̨̡̦̪̌Ηʻ̌̌̔̚Η 7 ʿ̸̨̡̨̡̣̱̦̼̜̪̖̬̖̣̯̖̣̏̀̌̽͗̚ ̨̨̨̛̖̭̪̬̦̜̬̖̙̥̍̏̔ͬ ̨̛̛̬̖̙̥̦̖̬̭̖̬̖̙̖̦̾̐̍́ͬ ̡̼̣̏͘ 8 ˈ̛̬̦̖̦̖̪̯̖̬̌̌̔̌̌ ʽ̨̨̡̬̪̬̱̯̍̔̌̚ ˁ̨̨̡̛̖̬̙̥̖̪̖̯̔̌̌ 1 DĂĚĂƚnjD͘K͘:͘K͘ʺϮ̵ϭ 2 Y^'džϭ 3 ʧ̨̛̬̦̯̜̦̼̜̯̣̦̌̌̌džϭ 4 ʻ̡̡̨̨̨̛̣̖̜̭̣̯̪̥̌̌̐džϭ • W/͗κϬϬͬΘϬϬ;̸̨̨̛̪̱̥̣̦̌̀ͿͬϭϮϬϬͬϮκϬϬͬϯϮϬϬͬ ςκϬϬ͘ʪ̨ϭςϬϬϬW/̨̨̨̨̨̭̪̥̺̪̬̬̥̥̦̽̀̐̌̐ ̸̨̛̖̭̪̖̖̦̍́ ˄̨̬̖̦̏̽W/͗ρ • ϭ͘ʦ̵̛̼̦̯̖̪̯̖̬͕̬̦̺̜̭̦̦̖̜̽̌̔̌̌́́̌̌̔̚ ̛̪̦̖̣̌D͘K͘:͘K͘ʺϮ Ϯ͘ʿ̸̨̡̡̡̨̛̣̯̖̪̯̖̬̥̪̯̖̬̱̔̀̌̔̌̽̀͘ ϯ͘ˁ̸̡̛̛̦̯̖̪̖̬̖̣̯̖̣̦̦̖̜̪̦̖̣̔̏̽̀̌̽̌̌̔̌̚ D͘K͘:͘K͘ʺϮ κ͘ʪ̨̭̯̱̪̦̼ϯ̨̨̨̛̛̬̖̙̥̖̭̪̬̦̜̬̖̙̥̌͗̍̏̔ͬ ̨̡̛̛̬̖̙̥̦̖̬̭̖̬̖̙̖̦̼̣̾̐̍́ͬ̏͘ ʥ̨̨̨̨̛̛̖̭̪̬̦̖̭̖̦̖̦̖̏̔̔ 1 ٘୰ 2 ՘୰ 3 ૶࢞ 4 *6/Ӥ݅୰ 5 ӹ଒ܷ୰ 6 եଞܷ୰ 7 Ҽ୻ڔࠥमऄկڐ 8 ;9(ଠ୆֘ уռࠃ੒ Ԕੇࣲࢢռ࡯Ԥୣܭ୭ݜ ڿࡉ ॸঞੌ࠭ ڏ׶࣐҄ 1 3GJ)GZ`3505ƿǨ 2 79-^ 3 ґғԪ^ 4 2UMUૉ঻^ 1 Ӄؠ=OTJY 2 6)୆(9;ו'ঀՍ *6/੦঴ ײ੽લޅ6*/ગ৥ͫબر֨௵ݖ߶ҵऄ਋ङ ;9(ঀՍܷޞ澞 • • *6/ ௄ગ ߂௤*6/௜Ԉղ࣫ *6/঴ ރ ԯݖԯऀ͹ر௵߶କݎӱՕऀङ ;9(ঀՍͫ௵ر߶ਘԈ؍੸۱߄ ڷ஬ङ௜Ԉ३پ澞 Ոӟ;9(ଠ୆֘ ;9(ଠ୆֘କݎӱ6) Ҽڐސե߶կ௵ڐ һय़ڔࠥͫڐկमऄڔࠥҼ୻ ړࠆ঎ݸ ֛ঋ 9;݊ܣ(ͫࣀեرҿ୍ݖޏҵऄ਋ङ ;9(ঀՍ澞 Оӗصࢮࢳ۪ऄӠԮகͫબԓ҅ߎગוଶՉ஧䃷 ۪Չ䉸澞 બԓғݷગו澞իөر҅ґғݼޗͫۇٴՕਈଭۨ 澞ְ݃י۞וગ ݱ֨ߧײҁߎфս۟ޞӱѠѾЉଠͫબॹԯҠ࠲ ҅ऀ35053ͱ澞࠴ߧײय़ܴڥە৒Շࣿͫ બؼԛ澞 ߎфսԕխ▲пشனў澞ߧײթҵͫՕਈѫحਚ 䳑ێ澞࠴֜ЉଠՠٍљЈҩॿ҅ऀ澞 ҵՐ▲Ֆऄ਋ݖ߶௵رડغՕਈͫߧײ ঋ֛ ङ;9(ঀՍ澞 ֛ঋ ځ҅ऀପऄङ;9(ঀՍ澞 ֛ঋ غડ୍ޏկԈऄ਋澞 ԉͫબઘ୼ٮઑ۪ڏך޾஬ײ ঋ֛ ]]]SGJIGZ`IUS ײ஬଒▲࠵дઆՕ৚३ܷ୚澝ۅਈગ৥澝ࢰҰߧݼ澝 ੮வ߻ӕ澝љՃਘؔУًۅગ৥ঈͫબђ ]]]SGJIGZ`IUS*U]TRUGJYЈૺ؍ۇٴ੸૷ў澞 1 2 3 4 5 6 7 8 1 2 3 4 • • 1 ࠻ुੁ 2 ࠝհुੁ 3 ݛ਺Ծ஄ 4 ଎Իଗࡢݛ৔ 5 ટ؟Իࡳߔ 6 ҋԻ؟ટ 7 ৔ࡢݛҖࢇԂݞ ۴הֻҖࢸࢷֻҖ΋̛ 8 Ѱ̔ؿ˗ ࢼૺʋ࠾ זࡅέ࢝ૣ 1 0DG&DW]02-20ʎ 2 46*ʎ 3 ؿऎ৞Җٕ 4 Իˈݛફ৲ࢠ • '3, ̛قʅ  ܕ଎ઝ࡛߭ձ੼ଥফо'3, '3,Ԧخ • 02-20ҏ߾ִؿ˗ѹѰ̔ࡶ̿εТЬ Ѱ̔ࡶ߾&3ࠉʼଢТЬ 02-20ҏ߾ִ࢑Еࡢݛ৔ձ׼ТЬ ɼएֻҖई۴הֻҖࢸࢷֻҖ΋̛ձ ТЬݡ࢑ܹଟࡈی ʹࠆ۱ב 1 ٘揗 2 ՘揗 3 䈎忮 4 *6/Ӥ㠹揗 5 ӹ悹ܷ揗 6 㒑ଞܷ揗 7 旇⮆म朅ڔࠥ昘旅 8 ;9(惨୆֘ 䟖ռࠃ嫳 ୣܭ୭ݜ ڿࡉ Ԕ娙ࣲࢢռ࡯⮞ ॸ佷ੌ࠭ 旇׶࣐҄ 1 3GJ)GZ`3505ƿǨ 2 79-^ 3 ґғԪ^ 4 ڵ㶩嶳伤^ 暽ݖԯऀ͹ᆑ࢝௵悪ݎӱՕऀङ ;9(׀ͫ࢝௵ᆑਘ⥺؍娙۱߄ ڷ஬ङ樟⥺३ڔ澞 䎹䄿صࢮ䍿۪朅㤎Ԯ暿ͫ寶ԓ҅ߎ孙➩ଶՉ஧䃷 ۪Չ䉸澞 寶ԓғݷ孙➩澞ի⤄ᆑ҅ґғ䐘ݼͫ◅Օਈଭۨ 孙➩۞י㡦⻂澞 ݱ֨ߧײҁߎ䟗ս㩌۟ӱѠѾЉ惨ͫ寶ॹԯҠ࠲ ҅ऀ35053ͱ澞࠴ߧײ䱷ܴڥە傑䤚ࣿͫ 寶ؼ或澞 ߎ䟗սԕխ▲пشனў澞ߧײթҵͫՕਈ㫵㆏ਚ 䳑ێ澞࠴֜Љ惨ՠ㻯љЈ⡓ॿ҅ऀ澞 ֛ঋ 9;݊ܣ(ͫࣀ㒑ᆑҿ୍ݖޏҵ朅匊ङ ;9(׀澞 ֛ঋ ߧײՕਈͫⰵ宒ᆑ࢝௵ݖҵՐ▲Ֆ朅匊 ङ;9(׀澞 ֛ঋ 㚙҅ऀପ朅ङ;9(׀澞 ֛ঋ ⰵ宒୍ޏ⮆⥺朅匊澞 ֛ঋ ײ஬ڏך޾岚۪㎬ԉͫ寶孖⭶ ]]]SG…

Text truncated - open the document above for the full version.

MAD CATZ GLOBAL LIMITED FLAT/RM 507 5/F NEW TREASURE CENTRE 10 NG FONG STREET SAN PO KONG KL HONGKONG China Agent Authorization Company: MAD CATZ GLOBAL LIMITED Address: FLAT/RM 507 5/F NEW TREASURE CENTRE 10 NG FONG STREET SAN PO KONG KL HONGKONG China Product Name: WIRELESS MOUSE Model Number(s): M.O.J.O. M2 Product Description: WIRELESS MOUSE We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Oct. 24, 2022 Name: Lucian Lu Title: General Manager Company: MAD CATZ GLOBAL LIMITED

MAD CATZ GLOBAL LIMITED Responsibility Declaration Letter v1.0 Responsibility Declaration Letter Company name: MAD CATZ GLOBAL LIMITED Address: FLAT/RM 507 5/F NEW TREASURE CENTRE 10 NG FONG STREET SAN PO KONG KL HONGKONG China Product Name: WIRELESS MOUSE FCC ID: 2ASFYMM07MHINBL0000 Model(s): M.O.J.O. M2 Model(s) Difference Description: / We, MAD CATZ GLOBAL LIMITED, hereby acknowledge that all the product information (including all original, drafted, or modified documents) provided to the TCB either by us or our agent or representative(s) for the purposes of FCC certification will meet FCC regulations and requirements; and that any modifications or changes made as a result of TCB review of the documents will be formally implemented into the manufacturing process and product documentation shipped with equipment. We also confirm that all information provided is legitimate and does not contain any false content such as forgery, fabrication, alteration, tampering and concealment. We assume all economic and legal responsibilities in matters that may arise as a result of disclosure on sample products and associated product documentation provided for product certification that may subsequently be found to be a mis-representation of the final product and accompanying documentation when produced, marketed, or sold in the United States, Canada, or anywhere in the world. MAD CATZ GLOBAL LIMITED Contact person: Lucian Lu Date: Oct. 24, 2022

Report No.: AGC08218221001AP03 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC08218221001AP03 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC08218221001AP03 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC08218221001AP03 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID and IC Label Location 40.84mm*12.9mm

Report No.: AGC08218221001AP03 Page 1 of 6 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC08218221001AP03 Page 2 of 6 VIEW OF BATTERY-1 VIEW OF BATTERY-2 Report No.: AGC08218221001AP03 Page 3 of 6 ANTENNA CLOSE-UP PHOTO-1 INTERNAL VIEW OF EUT (FIGURE 1) Antenna Report No.: AGC08218221001AP03 Page 4 of 6 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC08218221001AP03 Page 5 of 6 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC08218221001AP03 Page 6 of 6 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) ****************************************End of Report****************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description WIRELESS MOUSE Test Model M.O.J.O. M2 FCC ID 2ASFYMM07MHINBL0000 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION P t =-0.831dBm=0.826mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(0.826mW /5mm) .[√2.404(GHz)]= 0.256<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

2.4 GHz PCB Antenna Specifications 1. Summary Item Units Value Outline Dimension mm L=15.5, H=4.5 Frequency Band MHz 2400~2480 Antenna Type PCB Model V9 Mouse Max Gain dBi 1.2 Input Impedance Ohm 50 Manufacture SHENZHEN BOSAIJIE ELECTRON CO.,LTD Trademark 2. S11 3. Radiation Pattern

Page 1 of 45 FCC Test Report Report No.: AGC08218221001FE02 FCC ID : 2ASFYMM07MHINBL0000 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : WIRELESS MOUSE BRAND NAME : MAD CATZ MODEL NAME : M.O.J.O. M2 APPLICANT : MAD CATZ GLOBAL LIMITED DATE OF ISSUE : Oct. 21, 2022 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC08218221001FE02 Page 2 of 45 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 21, 2022 Valid Initial Release Report No.: AGC08218221001FE02 Page 3 of 45 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 7 2.3. RELATED SUBMITTAL(S)/GRANT(S) ....................................................................................................... 8 2.4. TEST METHODOLOGY ............................................................................................................................. 8 2.5. SPECIAL ACCESSORIES .......................................................................................................................... 8 2.6. EQUIPMENT MODIFICATIONS ................................................................................................................. 8 2.7. ANTENNA REQUIREMENT ....................................................................................................................... 8 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 9 4. DESCRIPTION OF TEST MODES ................................................................................................................. 10 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 11 5.1. CONFIGURATION OF TESTED SYSTEM ............................................................................................... 11 5.2. EQUIPMENT USED IN TESTED SYSTEM .............................................................................................. 11 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 11 6. TEST FACILITY .............................................................................................................................................. 12 7. PEAK OUTPUT POWER ................................................................................................................................ 13 7.1. MEASUREMENT PROCEDURE .............................................................................................................. 13 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 13 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 14 8. BANDWIDTH .................................................................................................................................................. 16 8.1. MEASUREMENT PROCEDURE .............................................................................................................. 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 16 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 16 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 20 9.1. MEASUREMENT PROCEDURE .............................................................................................................. 20 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 20 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 20 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 20 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 27 Report No.: AGC08218221001FE02 Page 4 of 45 10.1. MEASUREMENT PROCEDURE ............................................................................................................ 27 10.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 27 10.3. MEASUREMENT EQUIPMENT USED .................................................................................................. 27 10.4. LIMITS AND MEASUREMENT RESULT................................................................................................ 27 11. RADIATED EMISSION ................................................................................................................................. 29 11.1. MEASUREMENT PROCEDURE ............................................................................................................ 29 11.2. TEST SETUP .......................................................................................................................................... 30 11.3. LIMITS AND MEASUREMENT RESULT........................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC08218221001AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC08218221001AP02 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************