2ASJ3-ATSV625ATS6

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: •cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) •cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) •Agent can be Individual Entity or a Company Entity •Agent Entity must be located in US, US address/phone •Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) •Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: December 2, 2025 Signed by (Printed Name/Title): Nathan Grinager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Aviron Interactive. Grantee FRN: 0028262319 FCC ID: 2ASJ3-ATSV625 Contact Name: Andy Hoang Street Address: 265 Bartley Drive., North York M4A2N7, Canada City/Province/Zip: North York M4A2N7 Telephone No: 877-955-4222 Email: [email protected] Applicant Signature: Date: November 30, 2025 Signed by (Printed Name/Title): Andy Hoang, CEO

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 1, 2025 FCC ID: 2ASJ3-ATSV625 RE: Covered listed Attestation Part 2.911(d)(5)(i) Filing Aviron Interactive. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Aviron Interactive. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti- virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. Or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. RE: Attestation Statements Part 2.911(d)(5)(ii) Filing Aviron Interactive. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Applicant : Aviron Interactive. Address : 265 Bartley Drive., North York M4A2N7, Canada Signature : _________________________________ Name and Job Title : Andy Hoang, CEO E-mail : [email protected] Tel. : 877-955-4222

Request for Confidentiality Date: December 1, 2025 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: 2ASJ3-ATSV625 To whom it may concern: Short-term Confidentiality pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 90 days after the grant date. 1. Internal Photographs 2. External Photographs 3. User’s manual 4. Test Set up photos Permanent Confidentiality Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. 1. Block Diagram 2. Schematics Diagram 3. Operational Description / Software Security For U-NII Devices It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant : Aviron Interactive. Address : 265 Bartley Drive., North York M4A2N7, Canada Signature : _________________________________ Name and Job Title : Andy Hoang, CEO E-mail : [email protected] Tel. : 877-955-4222

Agent Authorization Letter Date: December 1, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: 2ASJ3-ATSV625 Product Name: ATS6 To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name : Leo Huang Job Title : VP e-mail : [email protected] We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : Aviron Interactive. Address : 265 Bartley Drive., North York M4A2N7, Canada Signature : _________________________________ Name and Job Title : Andy Hoang, CEO E-mail : [email protected] Tel. : 877-955-4222

Radio Exposure Evaluation Report Report No. : FA5O1401 TEL : 886-3-327-3456 Page Number : 1 of 12 FAX : 886-3-327-0973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: 2ASJ3-ATSV625 Radio Exposure Evaluation Report FCC ID : 2ASJ3-ATSV625 Equipment : ATS6 Brand Name : AVIRON Model Name : ATS6 Applicant : Aviron Interactive 265 Bartley Drive, North York, Ontario, M4A 2N7, Canada Manufacturer : Qisda Corporation 157, Shan-Ying Road, Gueishan, Taoyuan 333, Taiwan Standard : 47 CFR FCC Part 2 Subpart J, section 2.1091 The product was received on Oct. 14, 2025, and testing was started from Oct. 30, 2025 and completed on Nov. 21, 2025. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in 47 CFR FCC Part 2 Subpart J, section 2.1091 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) Radio Exposure Evaluation Report Report No. : FA5O1401 TEL : 886-3-327-3456 Page Number : 2 of 12 FAX : 886-3-327-0973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: 2ASJ3-ATSV625 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Applicable Standards ............................................................................................................................. 7 1.3 Testing Location ..................................................................................................................................... 7 2 MAXIMUM PERMISSIBLE EXPOSURE ............................................................................................... 8 2.1 Limit of Maximum Permissible Exposure ............................................................................................... 8 2.2 RF Exposure Exempt Measurement ...................................................................................................... 9 2.3 Multiple RF Sources Exposure ............................................................................................................. 10 2.4 MPE Calculation Method ...................................................................................................................... 11 2.5 Calculated Result and Limit .................................................................................................................. 12 Photographs of EUT V01 Radio Exposure Evaluation Report Report No. : FA5O1401 TEL : 886-3-327-3456 Page Number : 3 of 12 FAX : 886-3-327-0973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: 2ASJ3-ATSV625 History of this test report Report No. Version Description Issued Date FA5O1401 01 Initial issue of report Dec. 08, 2025 Radio Exposure Evaluation Report Report No. : FA5O1401 TEL : 886-3-327-3456 Page Number : 4 of 12 FAX : 886-3-327-0973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: 2ASJ3-ATSV625 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Exposure evaluation PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: None Reviewed by: Ben Tseng Report Producer: Michelle Tsai Radio Exposure Evaluation Report Report No. : FA5O1401 TEL : 886-3-327-3456 Page Number : 5 of 12 FAX : 886-3-327-0973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: 2ASJ3-ATSV625 1 General Description 1.1 Information 1.1.1 EUT General Information RF General Information Evaluation Mode Frequency Range (MHz) Operating Frequency (MHz) Modulation Type 2.4GHz WLAN 2400-2483.5 2412-2462 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 5GHz WLAN 5150-5250 5725-5850 5180-5240 5745-5825 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) Bluetooth 2400-2483.5 2402-2480 BR / EDR: FHSS (GFSK / π/4-DQPSK / 8DPSK) LE: DSSS (GFSK) 1.1.2 Antenna Information Ant. Brand Name Model Name Antenna Type Connector Support 1 INPAQ WA-P-LB-02-1125 PCB I-Pex 2.4G+5G+BT 2 INPAQ WA-P-LB-01-350 PCB I-Pex 2.4G+5G Ant. Port Gain (dBi) 2.4G 5G BT U-NII-1 U-NII-3 1 1 3.72 4.15 4.67 3.72 2 2 3.44 3.54 4.12 - Note 1: The EUT has two antennas. Radio Exposure Evaluation Report Report No. : FA5O1401 TEL : 886-3-327-3456 Page Number : 6 of 12 FAX : 886-3-327-0973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: 2ASJ3-ATSV625 For 2.4GHz function: For IEEE 802.11 b/g/n mode (2TX/2RX) Ant. 1 (port 1), Ant. 2 (port 2) could transmit/receive simultaneously. For 5GHz function: For IEEE 802.11 a/n/ac mode (2TX/2RX) Ant. 1 (port 1), Ant. 2 (port 2) could transmit/receive simultaneously. For BT function: For IEEE 802.15.1 Bluetooth mode (1TX/1RX) Ant. 1 (port 1) could transmit/recei…

Text truncated - open the document above for the full version.

FCC Radio Test Report Report No. : FR5O1401AN TEL : 886-3-3273456 Page Number : 1 of 25 FAX : 886-3-3270973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-D1 Ver4.6 Report Version : 01 FCC ID: 2ASJ3-ATSV625 FCC Radio Test Report FCC ID : 2ASJ3-ATSV625 Equipment : ATS6 Brand Name : AVIRON Model Name : ATS6 Applicant : Aviron Interactive 265 Bartley Drive, North York, Ontario, M4A 2N7, Canada Manufacturer : Qisda Corporation 157, Shan-Ying Road, Gueishan, Taoyuan 333, Taiwan Standard : 47 CFR FCC Part 15.407 The product was received on Oct. 14, 2025, and testing was started from Nov. 07, 2025 and completed on Nov. 25, 2025. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) FCC Radio Test Report Report No. : FR5O1401AN TEL : 886-3-3273456 Page Number : 2 of 25 FAX : 886-3-3270973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-D1 Ver4.6 Report Version : 01 FCC ID: 2ASJ3-ATSV625 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 8 1.3 Testing Location Information .................................................................................................................. 8 1.4 Measurement Uncertainty ...................................................................................................................... 8 2 TEST CONFIGURATION OF EUT......................................................................................................... 9 2.1 Test Channel Mode ................................................................................................................................ 9 2.2 The Worst Case Measurement Configuration ...................................................................................... 10 2.3 Support Equipment ............................................................................................................................... 11 2.4 Test Setup Diagram ............................................................................................................................. 12 3 TRANSMITTER TEST RESULT .......................................................................................................... 13 3.1 AC Power-line Conducted Emissions .................................................................................................. 13 3.2 Emission Bandwidth ............................................................................................................................. 15 3.3 Maximum Conducted Output Power .................................................................................................... 16 3.4 Peak Power Spectral Density ............................................................................................................... 18 3.5 Unwanted Emissions ............................................................................................................................ 20 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 24 APPENDIX A. TEST RESULTS OF AC POWER-LINE CONDUCTED EMISSIONS APPENDIX B. TEST RESULTS OF EMISSION BANDWIDTH APPENDIX C. TEST RESULTS OF MAXIMUM CONDUCTED OUTPUT POWER APPENDIX D. TEST RESULTS OF PEAK POWER SPECTRAL DENSITY APPENDIX E. TEST RESULTS OF UNWANTED EMISSIONS APPENDIX F. TEST RESULTS OF RADIATED EMISSION CO-LOCATION APPENDIX G. TEST PHOTOS PHOTOGRAPHS OF EUT V01 FCC Radio Test Report Report No. : FR5O1401AN TEL : 886-3-3273456 Page Number : 3 of 25 FAX : 886-3-3270973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-D1 Ver4.6 Report Version : 01 FCC ID: 2ASJ3-ATSV625 History of this test report Report No. Version Description Issued Date FR5O1401AN 01 Initial issue of report Dec. 08, 2025 FCC Radio Test Report Report No. : FR5O1401AN TEL : 886-3-3273456 Page Number : 4 of 25 FAX : 886-3-3270973 Issued Date : Dec. 08, 2025 Report Template No.: HE1-D1 Ver4.6 Report Version : 01 FCC ID: 2ASJ3-ATSV625 Summary of Test Result Report Clause Ref. Std. Clause Test Items Result (PASS/FAIL) Remark 1.1.2 15.203 Antenna Requirement PASS - 3.1 15.207 AC Power-line Conducted Emissions PASS - 3.2 15.407(a) Emission Bandwidth PASS - 3.3 15.407(a) Maximum Conducted Output Power PASS - 3.4 15.407(a) Peak Power Spectral Density PASS - 3.5 15.407(b) Unwanted Emissions PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and explanations: None Reviewed by: Ben Tseng Report Producer: Michelle Tsai FCC Radio Test Report Report No. : FR5O1401AN TEL : 886-3-3273456 P…

Text truncated - open the document above for the full version.

1 Copyright © by Passive System Alliance | All rights reserved. Address：No. 11, Keyi St., Zhunan Township, Miaoli County 350402 , Taiwan TEL：+886-37-585-555 # 17113 FAX : +886-37-585-511 Contact: Marco Yeh 2 Copyright © by Passive System Alliance | All rights reserved. 3 QISDA ATS6 27" Copyright © by Passive System Alliance | All rights reserved. Last updated in Sep.23 th , 2025 Report Version: V0.4 P r e s e n t e d b y : D o n n y G a o , R F R & D D e p t . C h e c k e d b y :H o n g X i a n X i u A p p r o v e d b y : L e e t i n g H s i e h I N PA Q Te c h n o l o g y C o . , L t d . 4 Released DateVersionRecord Aug.1 th , 20250.1Fine Tuning Aug.7 th , 20250.2Antenna Relocation Sep.22 th , 20250.3Comparison of Antenna Positions Sep.23 th , 20250.4Fine Tuning Revision History 5 Requirements of Antenna Design and Measurement Requirements of Antenna Design RFFunctionNumber of ANTFrequency Band QISDA ATS6 Main 2400~2500、5150~5850(MHz) Aux 2400~2500、5150~5850(MHz) Requirements of Measurement Test ItemSpecificationRemark VSWRN / A IsolationN / A Peak gain N / A EfficiencyN / A 6 Contents •Product / Antenna Overview •Results •VSWR •Isolation •Efficiency & Peak Gain •3D Radiation Pattern •Conclusions 7 Antenna Placement & Solution X Y Z AntennaANT Type Size (L * W * H) Cable TypeCable length MainPCB30*7*0.4mm1.13LLS350mm AuxPCB30*7*0.4mm1.13LLS525mm 8 AuxMain VSWR 2 2 9 Isolation -15dB 10 3D Radiation PatternResults Main－5470MHz Main－2450MHz X Y Z Z X Y Z Y X Z Y X Z X Y 11 3D Radiation PatternResults Aux－5470MHz Aux－2450MHz X Y Z Z X Z X Y Y X Y X Z Y Z 12 Efficiency (%) Peak Gain (dBi) Average Gain (dB) Frequency(MHz)MainAuxMainAuxMainAux 240041.59 34.64 3.43 3.34 -3.81-4.60 245043.32 38.84 3.72 3.44 -3.63-4.11 250042.19 36.73 3.29 3.22 -3.75-4.35 515042.41 37.79 3.83 3.54 -3.73-4.23 525042.68 36.06 4.15 3.34 -3.70-4.43 535040.18 38.10 4.22 3.65 -3.96-4.19 547041.56 38.11 4.15 3.42 -3.81-4.19 560045.98 37.83 4.78 3.58 -3.37-4.22 572545.29 36.48 4.67 4.01 -3.44-4.38 578044.82 38.14 4.54 4.12 -3.49-4.19 585042.21 37.79 4.49 4.09 -3.75-4.23 Peak Gain & Efficiency 13 1.The VSWR of all antennas is less than 2. 2.The isolation of all antennas is less than -15 dB. 3.The efficiency of the main antenna is between 40.18% and 45.98%. 4.The efficiency of the aux antenna is between 34.64% and 38.84%. 5.The peak gain of the main antenna ranges from 3.29 dBito 4.78 dBi. 6.The peak gain of the aux antenna ranges from 3.22 dBito 4.12 dBi. Conclusions 14 本資料均屬機密，僅供指定之收件人使用，未經寄件人許可不得揭露、複製或散佈本信件。 This message and any attachments are confidential and may be legally privileged. Any unauthorized review, use or distribution by anyone other than the intended recipient is strictly prohibited. If you are not the intended recipient, please immediately notify the sender, completely delete this documents, and destroy all copies. Your cooperation will be highly appreciated. Thank you for your attention