2ASJH-BMPRO7DI47 INCH Quad Core Android Tablet

1 User Manual for 7 inch BMPRO Tablet PC 1、Get to know the device home screen............................................................2 1.1 Home page....................................................................................................................2 1.2 Buttons introduction on the Home screen..................................................................2 1.2.1 Buttons that are always displayed on the screen......................................2 2、Applications..........................................................................................2 2.1 Turn on /close programs running in the background..........................................2 3、Setting.................................................................................................2 3.1 Wifi and Network.......................................................................................................2 3.1.1 Wi-Fi ......................................................................................................................2 3.1.2 Data network usage...........................................................................................3 3.2 Personal...............................................................................................................3 3.2.1 Storage..............................................................................................................3 3.22 Location service...............................................................................................3 3.2.3 Language and input methods............................................................................3 3.2.4 Back up and reset.............................................................................................3 3.3 OS......................................................................................................................3 4、 Tablet access to network.............................................................................................3 4.1 WiFi access to network.................................................................................4 4.2 Camera testing.............................................................................................4 4.3 Recording testing..........................................................................................4 4.4 Google Play..................................................................................................4 5、 FCC warning..............................................................................................................5 6、 RF warning..............................................................................................................5 7、 IC warning..............................................................................................................6 2 7inch Tablet 1.Get to know the device home screen The BMPRO tablet launcher is like any other Android tablet, here is a brief introduction: 1.1 Home screen After entering into the guide mode, the main interface -UI interface will be displayed. 1.2 Buttons introduction on the Home screen 1.2.1 Buttons that are always displayed on the screen Button of "back" . Click this icon in any interface can back to the previous level of directory. Button of "Home screen". Click this icon in any interface can back to home screen. Button of “Background app” . Click to see the app running in the background. 2.Applications 2.1 Turn on /close programs running in the background Click the background app icon at the bottom of the tablet to display all running background app, and click any app icon to switch it from the background to the current app. If you slide the app icon into left or right, then you can close the app. 3.Setting 3.1 WiFi and Network 3.1.1 Wi-Fi 1．Turn on and close Wi-Fi： Open the Settings, the first item is Wi-Fi, you can turn on WIFI. After opening WIFI, if you have a WIFI network around you, you will find in the list bar on the right, each WIFI name (on the router, this name is called SSID number，you can set it, generally not recommended to set it into Chinese) below have the small character indicates the encryption method of wireless WIFI, the fan icon behind each name, Indicates the signal strength of WIFI; If a small lock is added next to the fan icon, the signal is encrypted. A password is 3 required to connect. 2．Connect WI-FI： If the WIFI is not encrypted, it will be automatically connected after turning on the WIFI. If there is encryption, click the wireless WIFI name, it will automatically pop up to enter the password window, generally only need to enter the password and then click the "Connect" button in the lower right corner to connect. 3.1.2 Data network usage This option can display the usage of WIFI. 3.2 Personal 3.2.1 Storage Internal storage space: also called ROM space. It is the space allocated by the system to install the APK program. Memory space: it's the space for the local disk. That's shown a removable disk that you connect to your computer. It's usually a few gigabytes in size. EXTSD: It's the TF card inserted by user. Enable media scanning on SD card: Turn on this function, when the user inserts a TF card, the media files on the TF card can be displayed in the music and video player. If this function is not turned on, the media files on the TF card will not be displayed. 3.2.2 Location service High accuracy (GPS, WLAN, Bluetooth, mobile network positioning), power saving (WLAN, Bluetooth, mobile network positioning) 3.2.3 Language and input methods Language：Set system language Keyboard and input method: This item can see the system's own input method, you can also see the user installed input method. 3.2.4 Backup and reset Restore factory Settings: When some software of the system on the tablet cannot be used normally, or a function is abnormal, the system can be restored to the initial state through this function. However, restoring factory Settings will delete all user installed prog…

Text truncated - open the document above for the full version.

SETEC BMPRO PTY LTD 19 Henderson Road, Knoxfield 3180, Australia Date: 2023-09-13 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2ASJH-BMPRO7DI4 To Whom It May Concern: SETEC BMPRO PTY LTD certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory [Cecilio Dimasacat, Compliance Engineer]

SETEC BMPRO PTY LTD 19 Henderson Road, Knoxfield 3180, Australia Date: 2023-09-13 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2ASJH-BMPRO7DI4 To Whom It May Concern: SETEC BMPRO PTY LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signatory [Cecilio Dimasacat, Compliance Engineer]

SETEC BMPRO PTY LTD 19 Henderson Road, Knoxfield 3180, Australia Date: 2023-09-13 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2ASJH-BMPRO7DI4 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. ☒ Block Diagram ☐ Tune-Up Information ☒ Operational Description ☐ Security Information ☒ Schematics ☐ Software Defined Radio (SDR) Information ☐ Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); ☐ External Photos ☐ Test Setup Photos ☐ Internal Photos ☐ User Manual ☐For 45 days, pursuant to Public Notice DA 04-1705. or ☐For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory [Cecilio Dimasacat, Compliance Engineer]

SETEC BMPRO PTY LTD 19 Henderson Road, Knoxfield 3180, Australia Date: 2023-09-13 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2ASJH-BMPRO7DI4 POWER OF ATTORNEY To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, SETEC BMPRO PTY LTD are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory [Cecilio Dimasacat, Compliance Engineer]

SETEC BMPRO PTY LTD 19 Henderson Road, Knoxfield 3180, Australia Date: 2023-09-13 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: 2ASJH-BMPRO7DI4 To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, Signatory [Cecilio Dimasacat, Compliance Engineer]

Reference No.: WTX23X07150537W001/002/003 Page 2 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Reference No.: WTX23X07150537W001/002/003 Page 3 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 3 EUT View 4 Reference No.: WTX23X07150537W001/002/003 Page 4 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 5 EUT View 6 Reference No.: WTX23X07150537W001/002/003 Page 5 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 7

Reference No.: WTX23X07150537W001/002/003 Page 1 of 11 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Reference No.: WTX23X07150537W001/002/003 Page 5 of 11 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 Reference No.: WTX23X07150537W001/002/003 Page 6 of 11 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 1 Solder Board-Component View 2 Reference No.: WTX23X07150537W001/002/003 Page 7 of 11 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 3 Solder Board-Component View 4 Reference No.: WTX23X07150537W001/002/003 Page 8 of 11 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Antenna View WIFI/BT Antenna

Ref : ACR.94.8.20.SATU.A FREQUENCY: 2450 MHZ SERIAL NO.: SN 09/15 DIP 2G450-363 Calibrated at MVG US 2105 Barrett Park Dr. - Kennesaw, GA 30144 Calibration Date: 08/29/20 Summary: This document presents the method and results from an accredited SAR reference dipole calibration performed in MVG USA using the COMOSAR test bench. All calibration results are traceable to national metrology institutions. SAR Reference Dipole Calibration Report WALTEK TESTING GROUP CO., LTD. NO.77, HOUJIE SECTION , GUANTAI ROAD , HOUJIE TOWN, DONGGUAN GUANGDONG 518105 , CHINA MVG COMOSAR REFERENCE DIPOLE SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.94.8.20.SATU.A Page: 2/11 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Jérôme LUC Product Manager 8/30/2020 Checked by : Jérôme LUC Product Manager 8/30/2020 Approved by : Kim RUTKOWSKI Quality Manager 8/30/2020 Customer Name Distribution : Waltek Testing Group Co.,Ltd Issue Date Modifications A 8/30/2020Initial release SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.94.8.20.SATU.A Page: 3/11 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Introduction ................................................................................................................ 4 2 Device Under Test ..................................................................................................... 4 3 Product Description ................................................................................................... 4 3.1 General Information _______________________________________________________ 4 4 Measurement Method ................................................................................................ 5 4.1 Return Loss Requirements __________________________________________________ 5 4.2 Mechanical Requirements ___________________________________________________ 5 5 Measurement Uncertainty .......................................................................................... 5 5.1 Return Loss ______________________________________________________________ 5 5.2 Dimension Measurement ___________________________________________________ 5 5.3 Validation Measurement ____________________________________________________ 5 6 Calibration Measurement Results .............................................................................. 6 6.1 Return Loss and Impedance In Head Liquid ____________________________________ 6 6.2 Return Loss and Impedance In Body Liquid ____________________________________ 6 6.3 Mechanical Dimensions ____________________________________________________ 6 7 Validation measurement ............................................................................................ 7 7.1 Head Liquid Measurement __________________________________________________ 7 7.2 SAR Measurement Result With Head Liquid ____________________________________ 8 7.3 Body Liquid Measurement __________________________________________________ 9 7.4 SAR Measurement Result With Body Liquid __________________________________ 10 8 List of Equipment .................................................................................................... 11 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.94.8.20.SATU.A Page: 4/11 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 INTRODUCTION This document contains a summary of the requirements set forth by the IEEE 1528, FCC KDBs and CEI/IEC 62209 standards for reference dipoles used for SAR measurement system validations and the measurements that were performed to verify that the product complies with the fore mentioned standards. 2 DEVICE UNDER TEST Device Under Test Device Type COMOSAR 2450 MHz REFERENCE DIPOLE Manufacturer MVG Model SID2450 Serial Number SN 09/15 DIP 2G450-363 Product Condition (new / used) Used A yearly calibration interval is recommended. 3 PRODUCT DESCRIPTION 3.1 GENERAL INFORMATION MVG’s COMOSAR Validation Dipoles are built in accordance to the IEEE 1528, FCC KDBs and CEI/IEC 62209 standards. The product is designed for use with the COMOSAR test bench only. Figure 1 – MVG COMOSAR Validation Dipole SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.94.8.20.SATU.A Page: 5/11 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 4 MEASUREMENT METHOD The IEEE 1528, FCC KDBs and CEI/IEC 62209 standards provide requirements for reference dipoles used for system validation measurements. The following measurements were performed to verify that the product complies with the fore mentioned standards. 4.1 RETURN LOSS REQUIREMENTS The dipole used for SAR system validation measurements and checks must have a return loss of -20 dB or better. The return loss measurement shall be performed against a liquid filled flat phantom, with the phantom constucted as outlined in the fore mentioned standards. 4.2 MECHANICAL REQUIREMENTS The IEEE Std. 1528 and CEI/IEC 62209 standards specify the mechanical components and dimensions of the validation dipoles, with the dimensions frequency and phantom shell thickness dependent. The COMOSAR test bench employs a 2 mm phantom shell thickness there…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 37 TEST REPORT Reference No. .................... : WTX23X07150537W005 FCC ID ................................ : 2ASJH-BMPRO7DI4 Applicant ........................... : SETEC BMPRO PTY LTD. Address ............................. : 19 Henderson Road, Knoxfield 3180, Australia Manufacturer ..................... Dongguan Digi-in Digital Technology Co.,ltd Address ............................. Jiatian Industrial Park,Wulian Village,Fenggang Town,Dongguan City, Guangdong,China Product Name ................... : 7" Quad Core Android Tablet Model No.. .......................... : BMPRO7DI4 Standards .......................... : FCC Part 2.1093, IEEE Std C95.1: 2019 IEEE Std C95.3: 2002 + Rev. 2008 Date of Receipt sample .... : 2023-07-11 Date of Test........................ : 2023-07-11 to 2023-08-25 Date of Issue ..................... : 2023-08-25 Test Report Form No. ....... : WTX_Part2_1093W Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Jack Sun Silin Chen Reference No.: WTX23X07150537W005 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 37 TABLE OF CONTENTS 1. General Information ................................................................................................................................................... 4 1.1 Product Description for Equipment Under Test (EUT) ......................................................................................... 4 1.2 Test Standards .................................................................................................................................................... 6 1.3 Test Methodology ................................................................................................................................................ 6 1.4 Test Facility ......................................................................................................................................................... 6 2. Summary of Test Results .......................................................................................................................................... 7 3. Specific Absorption Rate (SAR) ................................................................................................................................ 8 3.1 Introduction .......................................................................................................................................................... 8 3.2 SAR Definition ..................................................................................................................................................... 8 4. SAR Measurement System ........................................................................................................................................ 9 4.1 The Measurement System .................................................................................................................................. 9 4.2 Probe ................................................................................................................................................................... 9 4.3 Probe Calibration Process ................................................................................................................................. 11 4.4 Phantom ............................................................................................................................................................ 11 4.5 Device Holder .................................................................................................................................................... 12 4.6 Test Equipment List ........................................................................................................................................... 13 5. Tissue Simulating Liquids ....................................................................................................................................... 14 5.1 Composition of Tissue Simulating Liquid ........................................................................................................... 14 5.2 Tissue Dielectric Parameters for Head and Body Phantoms ............................................................................. 15 5.3 Tissue Calibration Result ................................................................................................................................... 16 6. SAR Measurement Evaluation ................................................................................................................................ 17 6.1 Purpose of System Performance Check ............................................................................................................ 17 6.2 System Setup .................................................................................................................................................... 17 6.3 Validation Results .............................................................................................................................................. 18 7. EUT Testing Position ............................................................................................................................................... 19 7.1 EUT Antenna Position ...............................................................................................…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 64 TEST REPORT Reference No. ....................: WTX23X07150537W002 FCC ID ............................... .: 2ASJH-BMPRO7DI4 Applicant .......................... .: SETEC BMPRO PTY LTD. Address ............................ .: 19 Henderson Road, Knoxfield 3180, Australia Manufacturer .................... .: Dongguan Digi-in Digital Technology Co.,ltd Address ............................ .: Jiatian Industrial Park,Wulian Village,Fenggang Town,Dongguan City, Guangdong,China Product Name .................. .: 7" Quad Core Android Tablet Model No... ........................ .: BMPRO7DI4 Standards ......................... .: FCC Part 15.247 Date of Receipt sample ... .: 2023-07-11 Date of Test....................... .: 2023-07-11 to 2023-08-28 Date of Issue .................... .: 2023-08-28 Test Report Form No. ...... . : WTX_Part 15_247W Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Mike Shi Silin Chen Reference No.: WTX23X07150537W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 64 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 5 1.2 TEST STANDARDS ................................................................................................................................................. 6 1.3 TEST METHODOLOGY ........................................................................................................................................... 6 1.4 TEST FACILITY ...................................................................................................................................................... 6 1.5 EUT SETUP AND TEST MODE .............................................................................................................................. 7 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................. 9 1.7 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................. 10 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 13 3. ANTENNA REQUIREMENT ................................................................................................................................. 14 3.1 STANDARD APPLICABLE ..................................................................................................................................... 14 3.2 EVALUATION INFORMATION ................................................................................................................................ 14 4. FREQUENCY HOPPING SYSTEM REQUIREMENTS .................................................................................... 15 4.1 STANDARD APPLICABLE ..................................................................................................................................... 15 4.2 FREQUENCY HOPPING SYSTEM ......................................................................................................................... 15 4.3 EUT PSEUDORANDOM FREQUENCY HOPPING SEQUENCE ............................................................................... 16 5. QUANTITY OF HOPPING CHANNELS AND CHANNEL SEPARATION .................................................... 17 5.1 STANDARD APPLICABLE .................................................................…

Text truncated - open the document above for the full version.