2ASNSRB26Two Way Radio

Technical Specifications Factory default settings Frequency Range GMRS GMRS Memory Channel 30 channel RX TX power bandwidth CTCSS/ Remarks DCS 462.5625 462.5625 2W 12.5KHz 67.0 Audio Distortion <5% 2 462.5875 462.5875 2W 12.5KHz 118.8 Frequency Stability ±2. 5ppm 3 462.6125 462.6125 2W 12.5KHz 127.3 Maximum Frequency Deviation .;;5KHz/,;;2. 5KHz 4 462.6375 462.6375 2W 12.5KHz 131.8 Remanent Radiation .;;7uW 5 462.6625 462.6625 2W 12.5KHz 136.5 6 462.6875 462.6875 2W 12.5KHz 141.3 Modulation Mode 16K¢ F3E/ 11K<i> F3E 7 462.7125 462.7125 2W 12.5KHz 146.2 Reference Sensitivity ,;;o. 25uV ;,;;o. 3uV 8 467.5675 467.5675 0.5W 12.5KHz D243N Noise-free Sensitivity ,;;o. 2uv1,;;o. 25uV 9 467.5875 467.5875 0.5W 12.5KHz D032N Adjacent Channel Selectivity :::.65dB 10 467.6125 467.6125 0.5W 12.5KHz D047N 11 467.6375 467.6375 0.5W 12.5KHz nn!i1N Spurious Response Rejection ;:.55dB 12 467.6625 467.6625 0.5W 12.5KHz D053N Inter-Modulation :::.60dB 13 467.6875 467.6875 0.5W 12.5KHz nn«,;1\1 Electric Current ,;;1. 3A 14 467.7125 467.7125 0.5W 12.5KHz D116N 15 462.5500 462.5500 2W 12.5KHz 123 Operating Voltage 3. 7V DC 16 462.5750 462.5750 2W 12.5KHz D7431 17 462.6000 462.6000 2W 12.5KHz D3321 18 462.6250 462.6250 2W 12.5KHz 127.3 19 462.6500 462.6500 2W 12.5KHz D2431 20 462.6750 462.6750 2W 12.5KHz D606N 21 462.7000 462.7000 2 W 12.5KHz D7311 22 462.7250 462.7250 2W 12.5KHz 136.5 23 462.5500 467.5500 2W 12.5KHz 136.5 24 462.5750 467.5750 2W 12.5KHz 136.5 07 08 GMRS channel RX TX power bandwidth 25 462.6000 467.6000 2W 12.5KHz 26 462.6250 467.6250 2W 12.5KHz 27 462.6500 467.6500 2W 12.5KHz 28 462.6750 467.6750 2W 12.5KHz 29 462.7000 467.7000 2W 12.5KHz 30 462.7250 467.7250 2W 12.5KHz 09 CTCSS/ Remarks DCS 136.5 136.5 136.5 136.5 136.5 136.5 Warnings RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS ATIENTION! Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations. This two-way radio uses electromagnetic energy in the radio freque­ ncy (RF) spectrum to provide communications between two or more users over a distance. RF energy, which when used improperly, can cause biological damage. All Retevis two-way radios are designed, manufactured, and tested lo ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instruc­ tions lo users of two-way radios.These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control ii. Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.who.int/en/ Local Government Regulation When two-way radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirem­ ents. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retevis two-way radio has a RF Exposure Product Label. Also, your Retevis user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. 10 Radio License Governments keep the radios in classification, business two-way radios operate on radio frequencies that are regulated by the local radio management departments (FCC, ISED, OFCOM, ANFR, BFTK, Bundesnetzagentur... ) . To transmit on these frequencies, you are required to have a license issued by them. The detailed classification and the use of your two radios, please contact the local government radio management departments. Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohib­ ited Unauthorized modification and ad j ustment Changes or modifications not expressly approved by the party 「esponsiblefor compliance may void the user's authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization represent­ ative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules FCC Requirements: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. (Licensed radios are applicable) ; This device complies with part 15 of the FCC Rules. Operation 1s subject to the following two conditions: (Other devices are applicable) ( 1 ) This device may not cause harmful interference and. ( 2) this device must accept any interference received, including inte­ rference that may cause undesired operation 11 NOTE: •The radio operates on GMRS frequencies which require an FCC (Federal Communications Commission) license. You must be licensed before operating your radios. Licenses are issued for a ten- year term and can be renewed between 90 days prior to the expiration date and up to the actual expiration date of the license. If you receive a license, any family member, regardless of age, can operate GMRS stations and units within the licensed system. •To obtain a license, you need FCC Form 605 & 159, we suggest visiting the FCC website at https://www.fcc.gov/wireless/support/ fcc-form-605, which includes necessary instructions. More questions about the licens…

Text truncated - open the document above for the full version.

2020-11-11 Federal Communications Commission Authorization and Evaluation Division, 7435 Oakland Mills Road Columbia, MD 21046 USA Re: FCC ID: 2ASNSRB26 Gentlemen: The scanner receiver equipment meets the requirements of the FCC Rules, 15.121(a) and (b). Compliance is achieved through the following methods: The scanner receiver in this equipment is incapable of tuning, or readily being altered, by the User to operate within the frequency bands allocated to the Domestic Public Cellular Telecommunications Service in Part 22. Blocking of the cellular frequencies is implemented in the firmware of the unit’s main control central processing unit (CPU). Coverage of 824 - 849 MHz and 869 - 894 MHz is completely blocked, since it is done in the microprocessor, and cannot be re-enabled by any user-accessible procedure, including diode, resistor, or jumper changes, nor by connection of any external device such as a personal computer, nor by installation of any “special” enabling semiconductor device. The scanning receiver is designed so that the tuning, control and filtering circuitry is inaccessible. The scanning receiver is reject any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. Agency agreement expiration date: Nov.11, 2021 By: Weidong Shen Signature Printed Title: Manager On behalf of : Shenzhen Retevis Technology Co., Ltd. Telephone: 0755-23481953

2020-11-03 NemkoCanadaInc 303RiverRoad Ottawa,Ontario,Canada K1V1H2 Attn:DirectorofCertification AuthoritytoActasAgent Onourbehalf,IappointShenzhenHuatongweiInternationalInspectionCo., Ltd./1/F,Bldg3,HongfaHi-techIndustrialPark,GenyuRoad,Tianliao, Gongming,Shenzhen,China/HansHu,.toactasouragentinthepreparationof thisapplicationforequipmentcertification.Icertifythatsubmitteddocumentsproperly describethedeviceorsystemforwhichequipmentcertificationissought.Ialsocertify thateachunitmanufactured,importedormarketed,asdefinedintheFederal CommunicationsCommission’sregulationswillhaveaffixedtoitalabelidenticalto thatsubmittedforapprovalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonour behalf,Iacknowledgethatallresponsibilityforcomplyingwiththetermsandconditions forcertification,asspecifiedbyNemkoCanadaInc,stillresideswithShenzhen RetevisTechnologyCo.,Ltd./Room700,7/F,13-C,Zhonghaixin Science&TechnologyPark,No.12Ganli6thRoad,JihuaStreet,Longgang District,Shenzhen,China. Agencyagreementexpirationdate: Nov.03,2021 By: WeidongShen SignaturePrinted Title: GM Onbehalfof: ShenzhenRetevisTechnologyCo.,Ltd. Telephone: 0755-23481953

2020-11-03 EquipmentAutorisationDivision FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 FCCID: 2ASNSRB26 ProductName: TwoWayRadio RequestforConfidentiality PursuanttoSections0.457and0.459ofthecommissionsrules,weherebyrequestthat thefollowingdocumentsbeheldconfidential: (Listherethedocumentsforwhichyouareseekingconfidentiality–forexample...) Schematics Blockdiagram  Operationdescription BOM  PCBLayout PCBPlacement Tuneup Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoourcompetitors. By: WeidongShen SignaturePrinted Title: GM Onbehalfof: ShenzhenRetevisTechnologyCo.,Ltd. Telephone: 0755-23481953

EXTERANAL PHOTOS

INTERNAL PHOTOS

Page: 1 of 22 TEST REPORT Report No..................................: CHTEW20100100 Report Verification: Project No.................................： SHT2008103307EW FCC ID ............................................. : 2ASNSRB26 Applicant’s name ........................... : Shenzhen Retevis Technology Co., Ltd. Address ............................................. : Room 700, 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China Test item description .................... : Two Way Radio Trade Mark ....................................... : RETEVIS Model/Type reference ....................... : RB26 Listed Model(s) ................................. : - Standard ......................................... : FCC CFR Title 47 Part 15 Subpart B Date of receipt of test sample...........: Oct.09, 2020 Date of testing..............................: Oct.09, 2020- Nov.12, 2020 Date of issue.................................: Nov. 12, 2020 Result .................. ........................: PASS Compiled by ( position+printed name+signature) .. : File administrators Echo Wei Supervised by ( position+printed name+signature) .. : Project Engineer Hans Hu Approved by ( position+printed name+signature) .. : RF Manager Hans Hu Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd. Address ............................................. : 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report merely corresponds to the test sample. Report No.: CHTEW20100100 Page: 2 of 22 Issued: 2020-11-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2019-10) Contents 1. TEST STANDARDS AND REPORT VERSION ........................................... 3 1.1. Test Standards 3 1.2. Report version 3 2. TEST DESCRIPTION .................................................................... 4 3. SUMMARY ............................................................................... 5 3.1. Client Information 5 3.2. Product Description 5 3.3. Radio Specification Description 6 3.4. Testing Laboratory Information 6 4. TEST CONFIGURATION ................................................................. 7 4.1. EUT operation mode 7 4.2. Support unit used in test configuration 7 4.3. Environmental conditions 7 4.4. Statement of the measurement uncertainty 7 4.5. Equipments Used during the Test 8 5. TEST CONDITIONS AND RESULTS ..................................................... 9 5.1. Conducted Emissions 9 5.2. Radiated Emissions 12 5.3. Antenna conducted power for reciver 18 5.4. Sanning receivers and frequency converters used with sanning receviers 20 6. TEST SETUP PHOTOS OF THE EUT .................................................. 21 7. EXTERNAL AND INTERNAL PHOTOS OF THE EUT .................................. 22 Report No.: CHTEW20100100 Page: 3 of 22 Issued: 2020-11-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2019-10) 1. TEST STANDARDS AND REPORT VERSION 1.1. Test Standards The tests were performed according to following standards: FCC CFR Title 47 Part 15 Subpart B - Unintentional Radiators ANSI C63.4: 2014 – American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40GHz 1.2. Report version Revision No. Date of issue Description N/A 2020-11-12 Original Report No.: CHTEW20100100 Page: 4 of 22 Issued: 2020-11-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2019-10) 2. TEST DESCRIPTION Test Item Section in CFR 47 Result Test Engineer Conducted Emissions 15.107(a) Pass Jianquan Wu Radiated Emissions 15.109(a) Pass Quanhai Deng Antenna conducted power for reciver 15.111 Pass Zijian Li Scanning receviers and frequency converters used with scanning receivers 15.121(b) N/A #1 - Note: 1. The measurement uncertainty is not included in the test result. 2. #1, The scanning recevie frequency range of this EUT is from 462.5500 to 467.7250MHz, not in the cellular radiotelephone service frequency bands, so this item is not applicable. Report No.: CHTEW20100100 Page: 5 of 22 Issued: 2020-11-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2019-10) 3. SUMMARY 3.1. Client Information Applicant: Shenzhen Retevis Technology Co., Ltd. Address: Room 700, 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China Manufacturer: Shenzhen Retevis Technology Co., Ltd. Address: Room 700, 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China 3.2. Product Description Main unit Name of EUT: Two Way Radio Trade Mark: RETEVIS Model/Type reference: RB26 Listed Model(s) - Power supply: DC 3.7V Hardware version: RB26-v3.0 Software version: RB26-v3.0 Ancillary unit Battery information: Model: BL26 Voltage: DC 3.7V Capacity: 2000mAh(7.4Wh) Charger information: Model: DC26 Input: DC5Va.c.,1000mA Output: DC4.2Va.c.,300mA Report No.: CHTEW20100100 Page: 6 of 22 Issued: 2020-11-12 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2019-10) 3.3. Radio Specification Description Transmit frequency: #2 Main channel: (462MHz) 462.5500, 462.5750, 462.6000, 462.6250, 462.6500, 462.6750, 462.7000, 462.72…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS OF THE EUT Conducted Emissions (AC Mains) Radiated Emissions