2ASWVSWIFI-TRACKCAMIP CAMERA

Shenzhen LINGDU Auto Electronics Co., Ltd. DATE:2020-1-8 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint Shenzhen Zhongjian Nanfang Testing Co.,Ltd.; 1st Floor, Block No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China；Bruce.Zhang, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with 1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua,Shenzhen, Guangdong, China Dated this 2020-01-08 By: Sophie Huang Signature Printed Title: Manager On behalf of : Shenzhen LINGDU Auto Electronics Co., Ltd. Telephone: 8613823114619

Shenzhen LINGDU Auto Electronics Co., Ltd. DATE :2020-01-08 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ASWVSWIFI-TRACKCAM Product Name: IP CAMERA Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operation description  BOM These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2020-01-08 By: Sophie Huang Signature Printed Title: Manager On behalf of : Shenzhen LINGDU Auto Electronics Co., Ltd. Telephone: 8613823114619

Declaration Letter We, Shenzhen LINGDU Auto Electronics Co.,Ltd. declared that our product IP CAMERA item No.: SWIFI-TRACKCAM , SWIFI-TRACKCM32GB were identical inside, the electrical circuit design, layout, components used and internal wiring, with only difference being model name and SWIFI-TRACKCM 32GB comes with a 32GB card, SWIFI-TRACKCM does not. Sincerely yours Signature: Name/Title: Sophie Huang / Manager Tel. No.: 8613823114619 E-Mail: [email protected] Date：2020-1-8

Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 56 of 65 8 EUT Constructional Details Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 57 of 65 Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 58 of 65 Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 59 of 65 Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 60 of 65 Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 61 of 65

label location label location

Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 62 of 65 Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 63 of 65 Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 64 of 65 Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 65 of 65 ------End of report------

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE191205803 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page RF Exposure Evaluation Report Applicant: Shenzhen LINGDU Auto Electronics Co., Ltd. Address of Applicant: 1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua, Shenzhen, China Equipment Under Test (EUT) Product Name: IP CAMERA Model No.: SWIFI-TRACKCAM , SWIFI-TRACKCM32GB Trade mark: Swann FCC ID: 2ASWVSWIFI-TRACKCAM Applicable standards: FCC CFR Title 47 Part 2 Subpart J Section 2.1091 Date of sample receipt: 11 Dec., 2019 Date of Test: 11 Dec., to 30 Dec., 2019 Date of report issue: 30 Dec., 2019 Test Result: PASS* Report No: CCISE191205803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 7 2 Version Version No. Date Description 00 30 Dec., 2019 Original Tested by: Date: 30 Dec., 2019 Test Engineer Reviewed by: Date: 30 Dec., 2019 Project Engineer Report No: CCISE191205803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 7 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 CLIENT INFORMATION ........................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ...................................................................................................................... 4 4.3 OPERATING MODES .............................................................................................................................................. 4 4.4 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ...................................................................... 4 4.5 LABORATORY FACILITY ........................................................................................................................................ 5 4.6 LABORATORY LOCATION ...................................................................................................................................... 5 5 TECHNICAL REQUIREMENTS SPECIFICATION IN FCC CFR TITLE 47 PART 2.1091 ............................ 6 5.1 LIMITS .................................................................................................................................................................... 6 5.2 TEST PROCEDURE ................................................................................................................................................. 6 5.3 RESULT .................................................................................................................................................................. 7 5.4 CONCLUSION ......................................................................................................................................................... 7 Report No: CCISE191205803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 7 4 General Information 4.1 Client Information Applicant: Shenzhen LINGDU Auto Electronics Co., Ltd. Address: 1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua, Shenzhen, China Manufacturer: Shenzhen LINGDU Auto Electronics Co., Ltd. Address: 1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua, Shenzhen, China Factory: Dongguan KAKA Electronic Technology Co., Ltd Address: No.395, Huanshi East Road, Shitanpu, TangxiaTown, Dongguan, Guangdong, China 4.2 General Description of E.U.T. Product Name: IP CAMERA Model No.: SWIFI-TRACKCAM , SWIFI-TRACKCM32GB Operation Frequency: 2.4G Wi-Fi: 2412MHz~2472MHz Modulation technology: 802.11b: DSSS, 802.11g/n: OFDM Antenna Type: Internal Antenna Antenna gain: Wi-Fi: 2.0 dBi Test Sample Condition: The test samples were provided in good working order with no visible defects. Remark: 4.3 Operating Modes Operating mode Detail description 2.4G WIFI mode Keep the EUT in continuously transmitting in 2.4G WIFI mode 4.4 Additions to, deviations, or exclusions from the method No Report No: CCISE191205803 Shenzhen Zhongjian Nanfang Testin…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE191205801 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT (WIFI) Applicant: Shenzhen LINGDU Auto Electronics Co., Ltd. Address of Applicant: 1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua, Shenzhen, China Equipment Under Test (EUT) Product Name: IP CAMERA Model No.: SWIFI-TRACKCAM , SWIFI-TRACKCM32GB Trade mark: Swann FCC ID: 2ASWVSWIFI-TRACKCAM Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: 11 Dec., 2019 Date of Test: 11 Dec., to 30 Dec., 2019 Date of report issued: 30 Dec., 2019 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 65 2 Version Version No. Date Description 00 30 Dec., 2019 Original Tested by: Date: 30 Dec., 2019 Test Engineer Reviewed by: Date: 30 Dec., 2019 Project Engineer Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 65 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST ENVIRONMENT AND TEST MODE ................................................................................................................... 6 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 6 5.5 MEASUREMENT UNCERTAINTY .............................................................................................................................. 6 5.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD....................................................................... 6 5.7 LABORATORY FACILITY .......................................................................................................................................... 6 5.8 LABORATORY LOCATION ....................................................................................................................................... 7 5.9 TEST INSTRUMENTS LIST ....................................................................................................................................... 7 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 6.1 ANTENNA REQUIREMENT ....................................................................................................................................... 8 6.2 CONDUCTED EMISSION ......................................................................................................................................... 9 6.3 CONDUCTED OUTPUT POWER ............................................................................................................................ 12 6.4 OCCUPY BANDWIDTH .......................................................................................................................................... 15 6.5 POWER SPECTRAL DENSITY ............................................................................................................................... 20 6.6 BAND EDGE ......................................................................................................................................................... 23 6.6.1 Conducted Emission Method..........................................................................................................…

Text truncated - open the document above for the full version.

Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 31 of 65 802.11g mode: Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11g Tx mode Test Channel: Lowest channel Polarization: Vertical Test Voltage: AC 120/60Hz Environment: Temp: 24°C Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 32 of 65 Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11g Tx mode Test Channel: Lowest channel Polarization: Horizontal Test Voltage: AC 120/60Hz Environment: Temp: 24°C Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 33 of 65 Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11g Tx mode Test Channel: Highest channel Polarization: Vertical Test Voltage: AC 120/60Hz Environment: Temp: 24°C Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 34 of 65 Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11g Tx mode Test Channel: Highest channel Polarization: Horizontal Test Voltage: AC 120/60Hz Environment: Temp: 24°C Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 35 of 65 802.11n(HT20): Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11n(HT20) Tx mode Test Channel: Lowest channel Polarization: Vertical Test Voltage: AC 120/60Hz Environment: Temp: 24°C Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 36 of 65 Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11n(HT20) Tx mode Test Channel: Lowest channel Polarization: Horizontal Test Voltage: AC 120/60Hz Environment: Temp: 24°C Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 37 of 65 Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11n(HT20) Tx mode Test Channel: Highest channel Polarization: Vertical Test Voltage: AC 120/60Hz Environment: Temp: 24°C Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 38 of 65 Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11n(HT20) Tx mode Test Channel: Highest channel Polarization: Horizontal Test Voltage: AC 120/60Hz Environment: Temp: 24°C Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 39 of 65 802.11n(HT40): Product Name: IP CAMERA Product Model: IPC01 Test By: Mike Test mode: 802.11n(HT40) Tx mode Test Channel: Lowest channel Polarization: Vertical Test Voltage: AC 120/60Hz En…

Text truncated - open the document above for the full version.

Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 54 of 65 7 Test Setup Photo Radiated Spurious Emission Below 1GHz Above 1GHz Report No: CCISE191205801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912058 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 55 of 65 Conducted Emission