2ASYW-B01004V2Family of bait and trap-style stations

User Manual Bell iQ Total Solutions Revision 1.2 July 15, 2026 7/15/26 Bell iQ Total Solutions User Manual Rev1.2 Page 2 of 7 NOTICE TO READERS This document contains proprietary information which is the property of SMART WAVE TECHNOLOGIES CORP. CONFIDENTIAL Except for the right expressly granted in writing, this document may not, in whole or in part, be duplicated or disclosed without the prior written permission of Smart Wave Technologies Corp. 7/15/26 Bell iQ Total Solutions User Manual Rev1.2 Page 3 of 7 TABLE OF CONTENTS TABLE OF CONTENTS ......................................................................................................................... 3 Product Description .................................................................................................................................. 4 Product installation ................................................................................................................................... 4 Product operation ...................................................................................................................................... 4 Product Specification ................................................................................................................................ 5 Electrical Specifications ........................................................................................................................ 5 Radio Information ................................................................................................................................. 5 Antenna Information ............................................................................................................................. 5 Regulatory Information ............................................................................................................................ 6 7/15/26 Bell iQ Total Solutions User Manual Rev1.2 Page 4 of 7 PRODUCT DESCRIPTION The Bell iQ Total Solutions is a family of rodent traps and bait station devices used to detect rodents and insects that have entered the units and timestamp when the event occurred. The product offerings include two bait stations (Pulse Rat iQ TOTAL V2 and Pulse Mouse iQ TOTAL V2) and trap-style stations (24/7 iQ TOTAL V2). The devices uses a capacitive touch pad connected to capacitive touch sensor IC configured with customized filtering to provide information to the controller, which in turn uses a proprietary filtering algorithm to isolate events and detections. This information is passed to a mobile phone app, via Bluetooth, which will upload the information to a cloud server. The device is also equipped with LoRaWAN capabilities to provide direct device-to-cloud connection through a configurable heartbeat interval. PRODUCT INSTALLATION All Bell iQ Total Solutions products include a radio board installed in a plastic housing that is sonically welded to protect against installation environments and rodent exposure. An ER14505H battery must be connected to the radio board before the unit is installed in the plastic housing. PRODUCT OPERATION Once powered, the device will advertise for 30 seconds before going to sleep. Tapping the sensor pad a few times will wake the device up and it will again advertise for 30 seconds before going back to sleep. This operation will happen for device that are unregistered (Factory Mode). For devices that are registered and installed in the field, the device will continually advertise every 1.5 seconds. A LoRaWAN heartbeat will also transmit periodically according to how the device is configured. 7/15/26 Bell iQ Total Solutions User Manual Rev1.2 Page 5 of 7 PRODUCT SPECIFICATION Electrical Specifications Parameter Min Typical Max Unit Operating Voltage 2.4 - 3.6 VDC Operating Current 0.035 .05 125 mA Sleep Current 9 - 13 uA Radio Information BLE Category of Wideband Data Transmission equipment  Frequency Hopping Spread Spectrum (FHSS) equipment  Other types of Wideband Data Transmission equipment ( e.g. DSS, OFDM, etc.) Frequency Band 2400-2483.5 MHz Frequency Min (MHz) 2402 Frequency Max (MHz) 2480 Type of modulation BLE (GFSK) RF Output Impedance 50 Ohm LoRaWAN Category of Wideband Data Transmission equipment  Frequency Hopping Spread Spectrum (FHSS) equipment  Other types of Wideband Data Transmission equipment ( e.g. DSS, OFDM, etc.) Frequency Band 863.0-870 MHz (EU); 915-928 MHz (ANZ); 902-928 MHz (US/CAN) Frequency Min (MHz) 863.0 MHz (EU); 917 MHz (ANZ); 903 MHz (US/CAN) Frequency Max (MHz) 870 MHz (EU); 926 MHz (ANZ); 914.9 MHz (US/CAN) Type of modulation Chirp Spred Spectrum RF Output Impedance 50 Ohm Antenna Information The device is equipped with a fixed ¼ wave monopole, helical style antenna with a connector-style PCB- mount base, which is the only antenna intended and certified to be used on the device. Manufacturer Linx Technologies Type ¼ wave monopole Model ANT-915-VENTH Frequency Range 902-930 MHz Peak Gain (dBi) 0.9 dBi 7/15/26 Bell iQ Total Solutions User Manual Rev1.2 Page 6 of 7 REGULATORY INFORMATION CANADA ISED Regulatory Statements IC: 24934-B01004V2 PMN: Bell iQ Total Solutions HVIN(s): Pulse Mouse iQ TOTAL V2, Pulse Rat iQ TOTAL V2, 24/7 iQ TOTAL V2 ISED non-interference disclaimer This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout br…

Text truncated - open the document above for the full version.

1 Marmac Drive, Toronto, Ontario, M9W 1E7 Tel: (416) 679-5050 Fax: (416) 679-WAVE (9283) www.multitech.com December 16, 2025 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer Subject: Covered Equipment Certification Attestation Letter Applicant: SmartWave Technologies FCC ID: 2ASYW-B01004V2 The applicant certifies that the equipment for which authorization is sought i s not “covered” equipment prohibited from receiving an equipment authorization pursuant to section ß2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by an y of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the appli cant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Joe Triventi Title: Engineering Manager Company Name: SmartWave Technologies Date: December 16, 2025

1 Marmac Drive, Toronto, Ontario, M9W 1E7 Tel: (416) 679-5050 Fax: (416) 679-WAVE (9283) www.multitech.com U.S. Agent Designation for Service of Process - Certification Attestation Letter December 16, 2025 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2ASYW-B010004V2 Applicant FRN: 0028362523 This letter serves as a formal designation, pursuant to ß2.911(d)(7) of the FCC Rules, of the following U.S. Agent* for Service of Process for the equipment under application: U.S. Agent for Service of Process: • C ompany Name: Multi-Tech Systems • P hysical U.S. Company Address: 2205 Woodale Dr. Mounds View, MN 55112 • Agent Name: Tim Gunn • Agent Email Address: [email protected] • Agent FRN**: 0009336579 The above listed designated agent hereby acknowledges and accepts the obligation for service of proces s on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Servic e of Process for a minimum period of one year following either: • Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. • The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant) Signed: Signed: Printed name: Joe Triventi Printed name: Tim Gunn Title: Engineering Manager Title: Director of Certification and Product Support Company Name: SmartWave Technologies Company Name: Multi-Tech Systems Date: December 16, 2025 Date: December 16, 2025

1 Marmac Drive, Toronto, Ontario, M9W 1E7 Tel: (416) 679-5050 Fax: (416) 679-WAVE (9283) www.mu ltitech.com Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC and ISED Certification Application Dear Director of Certification, This letter formally appoints S pencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC and ISED Canada regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party invo lved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti- Drug Abuse Act of 1988 (21 U.S.C. ß862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Nemko North America, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Sincerely, Dated: December 16, 2025 Agency agreement expiration date: December 16, 2026 *Up to 12 months Signed by: Joe Triventi Signature Print name Engineering Manager Title 416-679-5050 Phone On behalf of: SmartWave Technologies Company name

1 Marmac Drive, Toronto, Ontario, M9W 1E7 Tel: (416) 679-5050 Fax: (416) 679-WAVE (9283) www.multitech.com July 10, 2025 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Confidentiality – FCC FCC ID: 2ASYW-B01004V2 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Selection of exhibits for LTC - general Exhibit name  Permanent (Long Term) Block Diagrams ☒ Permanent (Long Term) Operation Description / Theory of Operation ☒ Permanent (Long Term) Parts List & Placement / BOM ☒ Permanent (Long Term) Schematics Selection of exhibits for LTC - specific 1 Exhibit name ☐ Permanent (Long Term) Tune-Up Procedure ☐ Permanent (Long Term) SDR 2 Software / Security Info Our company has spent a substantial effort in developing this product and it is one of the first of its kind in the industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. 1 - Tune up procedure is applicable only for licensed equipment. 2 - The FCC rules require that any radio, in which the software is designed or expected to be modified by a party other than the manufacturer that would affect the operating parameters of frequency range, modulation type, maximum output power or other radio frequency parameters outside the range under which the transmitter has been approved in accordance with the FCC rules, must be certified as a software-defined radio (SDR). 1 Marmac Drive, Toronto, Ontario, M9W 1E7 Tel: (416) 679-5050 Fax: (416) 679-WAVE (9283) www.multitech.com The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed by: Joe Triventi Signature Print name Engineering Manager Title 416-679-5050 Phone Smart Wave Technologies Company 1 Marmac Drive, Toronto, Ontario, M9W 1E7 Address

1 Marmac Drive, Toronto, Ontario, M9W 1E7 Tel: (416) 679-5050 Fax: (416) 679-WAVE (9283) www.multitech.com July 15, 2026 Nemko North America, Inc. 303 River Road, Ottawa, ON K1V 1H2 Canada Attn: Director of Certification FCC ID: 2ASYW-B01004V2 ISED certification number: IC: 24934-B01004V2 HVINs/Models: Pulse Mouse iQ TOTAL V2, Pulse Rat iQ TOTAL V2, 24/7 iQ TOTAL V2 Family Certification request letter We hereby request Family Certification for the above mentioned HVINs/Models based on them being electrically, and physically identical apart from model name/number. 1. Electrically identical – is the circuitry, components, layout identical, other? Yes, the models are Electrically identical, the exact same PCBA is used in all models. 2. Have the same antenna type/gain? Yes, the antenna is the same for each model. 3. Have the same enclosure? No, the enclosures are different between the models. The Pulse Mouse is a bait station style of a rodent trap. The Pulse Rat is the same as the Pulse mouse, but larger to catch larger rodent. The 24/7 is a glue trap style rodent trap. Plastic materials are the same for both the Pulse Mouse and Pulse Rat. The 24/7 uses slightly different plastic material. Sincerely, Signed by: Joe Triventi Signature Print name Engineering Manager Title 416-679-5050 Phone

Model: 24/7 iQ TOTAL V2 Model: Pulse Mouse iQ TOTAL V2 Model: Pulse Rat iQ TOTAL V2 Enclosure internal view for Model: Pulse Mouse iQ TOTAL V2 (left) and Pulse Rat iQ TOTAL V2 (right) Enclosure internal view for Model: Pulse Mouse iQ TOTAL V2 (left) and Pulse Rat iQ TOTAL V2 (right)

Model: Pulse Mouse iQ TOTAL V2, Label design and location (bottom): Model: Pulse Rat iQ TOTAL V2, Label design and location (bottom): Model: 24/7 iQ TOTAL V2, Label design and location (bottom):

PCB front view (with and without RF shield): PCB back view: Zoomed in RF section view:

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC and RSS-102 Annex C – MPE Calculation; Date: August 2023 C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT Report ID Project ID REP122226 PRJ0079138 Type of assessment: MPE Calculation report Manufacturer: Product Marketing Name (PMN): SmartWave Technologies Bell iQ Total Solutions Hardware Version Identification Numbers (HVINs): Pulse Rat iQ TOTAL V2, Pulse Mouse iQ TOTAL V2, 24/7 iQ TOTAL V2 FCC identifier: ISED certification number: FCC ID: 2ASYW-B01004V2 IC: 24934-B01004V2 Specification:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 6, (December 2023) RSS-102 Annex B - Declaration of RF Exposure Compliance ATTESTATION: I attest that the information provided in Annex A is correct; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Date of issue: July 15, 2026 Tarek Elkholy, EMC/RF Engineer Prepared by Signature Section 1 MPE calculation Report reference ID: REP122226 Page 2 of 5 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road, Ottawa, ON, Canada, K1V 1H2 Tel: +1 613 737 9680 Test site registration number: CA2040 Montréal site: 292 Labrosse Avenue, Pointe-Claire, QC, Canada, H9R 5L8 Tel: +1 514 694 2684 Test site registration number: CA2041 Cambridge site: 1-130 Saltsman Drive, Cambridge, ON, Canada, N3E 0B2 Tel: +1 519 650 4811 Test site registration number: CA0101 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Section 1 MPE calculation Report reference ID: REP122226 Page 3 of 5 Evaluation summary 1.1 MPE calculation for simultaneous transmission 1.1.1 References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1) — Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. RSS-102, Section 5 For the purpose of this standard, ISED has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6: Table 1.1-2: Table 4 to RSS-102 — RF Field Strength Limits Frequency range (MHz) Electric field strength (V/m rms) Magnetic field strength (A/m rms) Power density (W/m 2 ) Reference Period (minutes) Limits for Controlled Environment 10–20 61.4 0.163 10 6 20–48 129.8 / ƒ 0.25 0.3444 / ƒ 0.25 44.72 / ƒ 0.5 6 48–100 49.33 0.1309 6.455 6 100–6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 0.6455 ƒ 0.5 6 6000–15000 137 0.364 50 6 Limits for Uncontrolled Environment 10–20 27.46 0.0728 2 6 20–48 58.07 / ƒ 0.25 0.1540 / ƒ 0.25 8.944 / ƒ 0.5 6 48–300 22.06 0.05852 1.291 6 300–6000 3.142 ƒ 0.3417 0.008335 ƒ 0.3417 0.02619 ƒ 0.6834 6 6000–15000 61.4 0.163 10 6 Notes: ƒ = frequency in MHz Section 1 MPE calculation Report reference ID: REP122226 Page 4 of 5 References, definitions and limits, continued Equation from page 18 of OET Bulletin 65, Edition 97-01 푆= 푃퐺 4휋푅 2 where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) 1.1.2 EUT technical information Transmitter 1 (BLE) Transmitter 2 (LoRa) Prediction frequency 2402 MHz 903 MHz Antenna type Helical antenna Helical antenna Antenna gain 0.9 dBi (declared), −2.1 dBi (measured) 0.9 dBi Maximum transmitter condu…

Text truncated - open the document above for the full version.

DATA AND DEVICES / ANT-915-VHETH The ANT-915-VHETH antenna is a compact surface mount helical antenna for low-power, wide-area (LPWA) applications including LoRaWAN®, remote controls, and ISM band applications in the 902 MHz to 930 MHz range. The ANT-915-VHETH antenna is made from 0.6 mm diameter nickel plated high-carbon steel for use in PCB-mount installations requiring a rugged, compact and omnidirectional embedded antenna. The connector-style base of the antenna ensures proper mounting for uniform performance in high- volume manufacturing. ORDERING INFORMATION Part NumberDescription ANT-915-VHETH915 MHz helical antenna with connector-style PCB-mount base AEK-915-VHETH915 MHz helical antenna evaluation kit Available from Linx Technologies and select distributors and representatives. ANT-915-VHETH 915 MHz Helical Antenna FEATURESAPPLICATIONS • Performance at 902 MHz to 930 MHz –VSWR: ≤ 2.3 –Peak Gain: 0.9 dBi –Efficiency: 58% • Direct PCB attachment • Reflow- or hand-solder assembly • Omnidirectional radiation pattern • Compact size –44.3 mm x 7.0 mm x 7.0 mm • Low-power, wide-area (LPWA) applications –LoRaWAN® • ISM applications • Remote control, sensing and monitoring –Security systems –Industrial machinery –Automated equipment –AMR (automated meter reading) • Internet of Things (IoT) devices • Smart Home networking DATA AND DEVICES / ANT-915-VHETH2 TABLE 1. ELECTRICAL SPECIFICATIONS ANT-915-VHETH915 MHz Frequency Range902 MHz to 930 MHz VSWR (max)2.3 Peak Gain (dBi)0.9 Average Gain (dBi)-2.5 Efficiency (%)58 PolarizationLinear RadiationOmnidirectional Max Power15 W Wavelength1/4-wave Electrical TypeMonopole Impedance50 Ω ESD SensitivityNOT ESD sensitive. As a best practice, Linx may use ESD packaging. Electrical specifications and plots measured with a 100 mm x 100 mm (3.94 in x 3.94 in) reference ground plane. TABLE 2. MECHANICAL SPECIFICATIONS ParameterValue ConnectionSolder pin Operating Temperature Range-40 °C to +80 °C Weight0.4 g (0.01 oz) Dimensions44.3 mm x 7.0 mm x 7.0 (1.75 in x 0.28 in x 0.28 in) Figure 1. ANT-915-VHETH Antenna Dimensions PRODUCT DIMENSIONS Figure 1 provides dimensions for the ANT-915-VHETH antenna. DATA AND DEVICES / ANT-915-VHETH3 VSWR RETURN LOSS Figure 2 provides the voltage standing wave ratio (VSWR) across the antenna bandwidth. VSWR describes the power reflected from the antenna back to the radio. A lower VSWR value indicates better antenna performance at a given frequency. Reflected power is also shown on the right-side vertical axis as a gauge of the percentage of transmitter power reflected back from the antenna. Return loss (Figure 3), represents the loss in power at the antenna due to reflected signals. Like VSWR, a lower return loss value indicates better antenna performance at a given frequency. Figure 3. ANT-915-VHETH Antenna Return Loss Figure 2. ANT-915-VHETH Antenna VSWR 902930 0 10 20 30 40 1 2 3 4 5 900905910915920925930935 Reflected Power (%) VSWR Frequency (MHz) 902930 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 900905910915920925930935 Return Loss (dB) Frequency (MHz) DATA AND DEVICES / ANT-915-VHETH4 PEAK GAIN The peak gain across the antenna bandwidth is shown in Figure 4. Peak gain represents the maximum antenna input power concentration across 3-dimensional space, and therefore peak performance at a given frequency, but does not consider any directionality in the gain pattern. Figure 4. ANT-915-VHETH Antenna Peak Gain AVERAGE GAIN verage gain (Figure 5), is the average of all antenna gain in 3-dimensional space at each frequency, providing an indication of overall performance without expressing antenna directionality. 902930 -20 -15 -10 -5 0 5 900905910915920925930935 Average Gain (dBi) Frequency (MHz) Figure 5. ANT-915-VHETH Antenna Average Gain 902930 -20 -15 -10 -5 0 5 900905910915920925930935 Peak Gain (dBi) Frequency (MHz) DATA AND DEVICES / ANT-915-VHETH5 RADIATION EFFICIENCY Radiation efficiency (Figure 6), shows the ratio of power delivered to the antenna relative to the power radiated at the antenna, expressed as a percentage, where a higher percentage indicates better performance at a given frequency. Figure 6. ANT-915-VHETH Antenna Radiation Efficiency 902930 0 10 20 30 40 50 60 70 80 90 100 900905910915920925930935 Efficiency (%) Frequency (MHz) DATA AND DEVICES / ANT-915-VHETH6 Figure 7. ANT-915-VHETH Antenna Radiation Patterns RADIATION PATTERNS Radiation patterns provide information about the directionality and 3-dimensional gain performance of the antenna by plotting gain at specific frequencies in three orthogonal planes. Antenna radiation patterns are shown in Figure 7 using polar plots covering 360 degrees. The antenna graphic at the top of the page provides reference to the plane of the column of plots below it. Note: when viewed with typical PDF viewing software, zooming into radiation patterns is possible to reveal fine detail. XZ-Plane GainYZ-Plane GainXY-Plane Gain 902 MHZ TO 930 MHZ (915 MHZ) XZ-Plane GainYZ-Plane GainXY-Plane Gain -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 902 MHz 915 MHz 930 MHz -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 GROUND PLANE 1/4-Wave monopole antennas require an associated ground plane counterpoise for proper operation. The size and location of the ground plane relative to the antenna will affect the overall performance of the antenna in the final design. When used in conjunction with a ground plane smaller than that used to tune the antenna, the center frequency typically will shift higher in frequency and the bandwidth will decrease. The proximity of other circuit elements and packaging near the antenna will also affect the final performance. For …

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC 15.247 and RSS-247; Date: Feb 12, 2024 C h o o s e S c a n d i n a v i a n t r u s t ANTENNA TEST REPORT Report ID: Project number: REP173181a PRJ0079138 Type of radio equipment: Bluetooth Device Applicant: Description of product: SmartWave Technologies Family of bait and trap-style stations Model(s)/HVIN(s): Product marketing name (PMN): Pulse Rat iQ TOTAL, Pulse Mouse iQ TOTAL, 24/7 iQ TOTAL Bell iQ Total Solutions FCC identifier: ISED certification number: FCC ID: 2ASYW-B01004V2 IC: 24934-B01004V2 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.247  RSS-247, Issue 4, July 2024, Section 5 Date of issue: July 7, 2026 Tarek Elkholy, EMC/RF Engineer Tested by Signature Andrey Adelberg, Senior EMC/RF Specialist Reviewed by Signature Report reference ID: REP173181a Page 2 of 13 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road, Ottawa, ON, Canada, K1V 1H2 Tel: +1 613 737 9680 Test site registration number: CA2040 Montréal site: 292 Labrosse Avenue, Pointe-Claire, QC, Canada, H9R 5L8 Tel: +1 514 694 2684 Test site registration number: CA2041 Cambridge site: 1-130 Saltsman Drive, Cambridge, ON, Canada, N3E 0B2 Tel: +1 519 650 4811 Test site registration number: CA0101 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc.…

Text truncated - open the document above for the full version.