2AT5O-SHD-KH121SEX TOY

Quick Start Guide • Sensera self-care device • Satin storage sachet • Magnetic USB charger • Product Manual and Quick Start Guide • 3 interchangeable lubricant capsules: 2 pleasure, 1 wellness What’s in the box: Introduction: Meet Sensera, a feminine wellness device that adapts to your changing body and enhances overall comfort, pleasure, and wellness. Sensera is bridging the gap between pleasure and wellness by tracking your unique body responses, including heart rate, friction, pelvic floor muscle contractions, moisture levels, and more. It adapts in real time to your needs and releases supplemental lubrication – resulting in a more comfortable, pleasurable experience. Over time, Sensera will learn about your specific likes and dislikes continuing to both adapt in the short term and the long term. It is a personalized experience that evolves with your body and throughout your life journey. Welcome to our community where pleasure meets wellness. Charging: To start your journey, we recommend fully charging your device before its first use. This can take up to 150 minutes. Connect the magnetic USB charging cable to the device’s charging port When fully charged, the LED on the button will remain solidly lit When fully charged, the LED on the button will stay lit. A full charge provides up to one hour of use Button Functions: Button 1 (Lubricant/Drop): Press to dispense lubrication press agin to stop sidpense. Hold to clean pipes. Button 2 (Program): Hold the program button to pair your device for the first time with the app. Press to starts your favorite program and another press to pause. Button 3 (On/Off + vibrations): Hold to turn the device on/off. Press to cycles through 4 vibration levels and patterns. 1 2 3 Customization of Device Settings With the Sensera App: Download the Sensera app from the App Store (for iPhone) or Google Play (for Android). Pair your phone with the device via Bluetooth and use the app to switch between inner and outer motors, adjust vibration patterns, and select custom programs. Capsule Placement Instructions: 1. Open the capsule housing by turning it 180 degrees counterclockwise 2. Insert the capsule with its foiled side up into the capsule housing. 3. Once inserted, close the capsule housing by turning it 180 degrees clockwise 4. Attach the capsule housing with the capsule inside to the device. 1234 Cleaning and Storage: 1. Lubricant – Remove the capsule from the capsule housing, then hold the drop button to clean the pipes internally. 2. Remove the charging cable before cleaning. 3. Clean the device thoroughly with warm, soapy water before and after each use. 4. Rinse it with hot water to remove all soap residue. 5. Dry the device with a clean, lint-free washcloth or microfiber towel ensuring no lint remains. 6. Store the device in a convenient location like your nightstand, so it's always within reach when you're ready for fun. Make sure it doesn't touch other objects and is kept out of reach of children. Safety and Precautions: This product is for adults only. It is not a contraceptive device. It is intended for personal use, although it can be used with a partner. Keep it out of reach of children. Avoid using excessive force to prevent injury or damage to the product. If you feel uncomfortable, stop using the device immediately and talk to your healthcare provider. Inspect your device before and after use. Do not use it if it's damaged. Safety and precaution FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be ‐ located or operating in conjunction with any other antenna or transmitter. IC WARNING: 1.This device contains licence‐exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence‐exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des émetteurs/récepteurs sans licence qui sont conformes aux RSS sans licence d'Innovation, Sciences et Développement économique Canada. L'exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences qui pourraient causer un fonctionnement indésirable de l'a…

Text truncated - open the document above for the full version.

ShenZhen S-HANDE Technology Co., Ltd. Add: 2 /F, Building 8, XinXinTian Industrial Park, Sha Jing Street, BaoAn District, ShenZhen, China Tel: 0755-33116865 Fax: 0755-33116865 Email: [email protected] Attestation Letter Date: 2025-09-12 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: Our product SEX TOY, model: SHD-KH121, FCC ID: 2AT5O-SHD-KH121, for marketing purpose, this product only supports , BLE 1M, BLE 2M, 2.4G Wi-Fi (2412-2462MHz, 802.11b/g/n ht20, 2422-2452MHz, 802.11n ht40 modes). The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Printed Name: Jin Cheng Title: CEO

CEO

QA-FR-170-B ShenZhen S-HANDE Technology Co., Ltd. Add: 2 /F, Building 8, XinXinTian Industrial Park, Sha Jing Street, BaoAn District, ShenZhen, China Tel: 0755-33116865 Fax: 0755-33116865 Email: [email protected] FCC Authorization Date: 2025-09-12 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , ShenZhen S-HANDE Technology Co., Ltd., Hereby authorizes Bay Area Compliance Laboratories Corp.(Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp.(Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Jin Cheng Title: CEO

QA-FR-172-A ShenZhen S-HANDE Technology Co., Ltd. Add: 2 /F, Building 8, XinXinTian Industrial Park, Sha Jing Street, BaoAn District, ShenZhen, China Tel: 0755-33116865 Fax: 0755-33116865 Email: [email protected] FCC Confidential Authorization Date: 2025-09-12 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AT5O-SHD-KH121 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, ShenZhen S-HANDE Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Printed Name: Jin Cheng Title: CEO

Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-EXP Page 1 / 4 EUT EXTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-EXP Page 2 / 4 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-EXP Page 3 / 4 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-EXP Page 4 / 4 *****END *****

Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 1 / 11 EUT INTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 2 / 11 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 3 / 11 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 4 / 11 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 5 / 11 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 6 / 11 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 7 / 11 BLE Antenna Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 8 / 11 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 9 / 11 Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 10 / 11 WIFI Antenna Bay Area Compliance Laboratories Corp. (Dongguan) EXHIBIT No.: 2502T59576E-RF-INP Page 11 / 11 *****END *****

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T59576E-RF-00B Report Template Version: FCC+IC-BLE-V2.2 Page 61 of 62 EXHIBIT C - RF EXPOSURE EVALUATION Maximum Permissible Exposure (MPE) Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Measurement Result The max conducted power including tune-up tolerance is -2.0dBm (0.63mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =0.63/5*(√2.480) = 0.2< 3.0 Note: the max conducted power including tune-up tolerance was declared by manufacturer. Result: Compliant. The stand-alone SAR evaluation is not necessary.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T59576E-RF-00A Report Template Version: FCC+IC-Wi-Fi2.4-V2.1 Page 74 of 74 EXHIBIT C - RF EXPOSURE EVALUATION Maximum Permissible Exposure (MPE) Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Measurement Result The max conducted power including tune-up tolerance is 9.7dBm (9.33mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =9.33/5*(√2.462) = 2.93< 3.0 Note: the max conducted power including tune-up tolerance was declared by manufacturer. Result: Compliant. The stand-alone SAR evaluation is not necessary. ***** END OF REPORT *****

TEST REPORT Applicant: ShenZhen S-HANDE Technology Co., Ltd. Address: 2 /F, Building 8, XinXinTian Industrial Park, Sha Jing Street, BaoAn District, ShenZhen, China, Product Name: SEX TOY F C C I D : 2AT5O-SHD-KH121 I C : 28068-SHDKH121 H V I N : SHD-KH121 Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 3, August 2023 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2020+Cor. 1-2023+C63.10a- 2024 + Errata to C63.10a-2024 ★ KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2502T59576E-RF-00B Report Date: 2025/10/15 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T59576E-RF-00B Report Template Version: FCC+IC-BLE-V2.2 Page 2 of 62 CONTENTS DOCUMENT REVISION HISTORY ................................................................................................ 4 1. GENERAL INFORMATION .......................................................................................................... 5 1.1 GENERAL DESCRIPTION OF EQUIPMENT UNDER TEST .......................................................................... 5 1.2 ACCESSORY INFORMATION ...................................................................................................................... 5 1.3 ANTENNA INFORMATION DETAIL▲ ........................................................................................................ 5 1.4 EQUIPMENT MODIFICATIONS ................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................................. 6 3. DESCRIPTION OF TEST CONFIGURATION ........................................................................... 7 3.1 OPERATION FREQUENCY DETAIL ............................................................................................................ 7 3.2 EUT OPERATION CONDITION .................................................................................................................. 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ............................................................................................... 7 3.4 SUPPORT CABLE LIST AND DETAILS ........................................................................................................ 7 3.5 BLOCK DIAGRAM OF TEST SETUP ............................................................................................................ 8 3.6 TEST FACILITY ........................................................................................................................................ 10 3.7 MEASUREMENT UNCERTAINTY .............................................................................................................. 10 4. REQUIREMENTS AND TEST PROCEDURES ........................................................................ 11 4.1 AC LINE CONDUCTED EMISSIONS ......................................................................................................... 11 4.1.1 Applicable Standard ........................................................................................................................................... 11 4.1.2 EUT Setup .......................................................................................................................................................... 13 4.1.3 EMI Test Receiver Setup ................................................................................................................................... 13 4.1.4 Test Procedure .................................................................................................................................................... 14 4.1.5 Corrected Amplitude & Margin Calculation ...................................................................................................... 14 4.1.6 Test Result .......................................................................................................................................................... 14 4.2 RADIATION SPURIOUS EMISSIONS .......................................................................................................... 15 4.2.1 Applicable Standard ........................................................................................................................................... 15 4.2.2 EUT Setup .......................................................................................................................................................... 15 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ................................................................................................ 17 4.2.4 Test Procedure .........................................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: ShenZhen S-HANDE Technology Co., Ltd. Address: 2 /F, Building 8, XinXinTian Industrial Park, Sha Jing Street, BaoAn District, ShenZhen, China Product Name: SEX TOY F C C I D : 2AT5O-SHD-KH121 I C : 28068-SHDKH121 H V I N : SHD-KH121 Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 3, August 2023 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2020+Cor. 1-2023+C63.10a- 2024 + Errata to C63.10a-2024 ★ KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2502T59576E-RF-00A Report Date: 2025/9/10 The above device has been tested and found compliant with the requirement of the relevant standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Alice Tan Approved By: Pedro Yun Title: RF Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T59576E-RF-00A Report Template Version: FCC+IC-Wi-Fi2.4-V2.1 Page 2 of 74 CONTENTS DOCUMENT REVISION HISTORY ................................................................................................ 4 1. GENERAL INFORMATION .......................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................. 5 1.2 ACCESSORY INFORMATION ...................................................................................................................... 5 1.3 ANTENNA INFORMATION DETAIL▲ ........................................................................................................ 5 1.4 EQUIPMENT MODIFICATIONS ................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................................. 6 3. DESCRIPTION OF TEST CONFIGURATION ........................................................................... 7 3.1 OPERATION FREQUENCY DETAIL ............................................................................................................ 7 3.2 EUT OPERATION CONDITION .................................................................................................................. 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ............................................................................................... 7 3.4 SUPPORT CABLE LIST AND DETAILS ........................................................................................................ 8 3.5 BLOCK DIAGRAM OF TEST SETUP ............................................................................................................ 8 3.6 TEST FACILITY ........................................................................................................................................ 10 3.7 MEASUREMENT UNCERTAINTY .............................................................................................................. 10 4. REQUIREMENTS AND TEST PROCEDURES ........................................................................ 11 4.1 AC LINE CONDUCTED EMISSIONS ......................................................................................................... 11 4.1.1 Applicable Standard ........................................................................................................................................... 11 4.1.2 EUT Setup .......................................................................................................................................................... 13 4.1.3 EMI Test Receiver Setup ................................................................................................................................... 13 4.1.4 Test Procedure .................................................................................................................................................... 14 4.1.5 Corrected Amplitude & Margin Calculation ...................................................................................................... 14 4.1.6 Test Result .......................................................................................................................................................... 14 4.2 RADIATION SPURIOUS EMISSIONS .......................................................................................................... 15 4.2.1 Applicable Standard ........................................................................................................................................... 15 4.2.2 EUT Setup .......................................................................................................................................................... 15 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ................................................................................................ 17 4.2.4 Test Procedure ............................................…

Text truncated - open the document above for the full version.

Wireless Device Over the Air Performance Data Summary REPORT NO. : OQ1D0806 EQUIPMENT : ESP-ANT S-H BRAND NAME : ESPRESSIF MODEL NAME : ESP32-S3-MINI-1 DEVICE RECEIVING DATE : Nov. 16, 2021 TEST DATE(S) : Nov. 16, 2021 ~ Nov. 16, 2021 Reviewed by: Approved by: Feynman Liu / Vice Manager Kevin Chu / Manager Sporton International (Kunshan) Inc. No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International (Kunshan) Inc. Page Number : 2 of 10 TEL : +86-512-57900158 Report Issued Date : Dec. 14, 2021 FAX : +86-512-57900958 Report Version : 1.0 Wireless Device OTA RF Performance Data Summary Report No. : OQ1D0806 Table of Contents Revision History ---------------------------------------------------------------------------------------------------------------------- 3 1. Administration Data ----------------------------------------------------------------------------------------------------------- 4 1.1 Testing Laboratory ------------------------------------------------------------------------------------------------------- 4 1.2 Applicant ------------------------------------------------------------------------------------------------------------------- 4 2. Product Photo ------------------------------------------------------------------------------------------------------------------- 4 3. Summary of Test Results ---------------------------------------------------------------------------------------------------- 5 4. FS Pattern ------------------------------------------------------------------------------------------------------------------------- 6 5. Description for EUT Testing Position ------------------------------------------------------------------------------------ 9 Sporton International (Kunshan) Inc. Page Number : 3 of 10 TEL : +86-512-57900158 Report Issued Date : Dec. 14, 2021 FAX : +86-512-57900958 Report Version : 1.0 Wireless Device OTA RF Performance Data Summary Report No. : OQ1D0806 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE OQ1D0806 1.0 Initial issue of report Dec. 14, 2021 Sporton International (Kunshan) Inc. Page Number : 4 of 10 TEL : +86-512-57900158 Report Issued Date : Dec. 14, 2021 FAX : +86-512-57900958 Report Version : 1.0 Wireless Device OTA RF Performance Data Summary Report No. : OQ1D0806 1. Administration Data 1.1 Testing Laboratory Test Site Sporton International (Kunshan) Inc. Test Site Location No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China TEL: +86-0512-5790-0158 FAX: +86-0512-5790-0958 Chamber □ OTA01-KS □ OTA02- KS □ OTA03-KS □ OTA04-KS ■ OTA05-KS ■: Indicates the chamber(s) used in this test report. 1.2 Applicant Company Name ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD Address Suite 204, Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China 2. Product Photo Sporton International (Kunshan) Inc. Page Number : 5 of 10 TEL : +86-512-57900158 Report Issued Date : Dec. 14, 2021 FAX : +86-512-57900958 Report Version : 1.0 Wireless Device OTA RF Performance Data Summary Report No. : OQ1D0806 3. Summary of Test Results Test / Position Frequency (MHz) Avg Gain (dBi) Peak Gain (dBi) Directivity (dBi) Efficiency (dB) Efficiency (%) Free Space 2397 -1.79 3.72 5.51 -1.79 66.15 2402 -1.74 3.69 5.43 -1.74 66.94 2407 -1.53 3.86 5.39 -1.53 70.28 2412 -1.32 3.99 5.31 -1.32 73.85 2417 -1.25 3.99 5.24 -1.25 75.07 2422 -1.17 4.00 5.17 -1.17 76.35 2427 -1.15 3.94 5.09 -1.15 76.67 2432 -1.18 3.87 5.05 -1.18 76.21 2437 -1.22 3.79 5.01 -1.22 75.58 2442 -1.15 3.92 5.06 -1.15 76.82 2447 -1.07 3.99 5.06 -1.07 78.12 2452 -0.99 4.17 5.16 -0.99 79.65 2457 -0.88 4.31 5.19 -0.88 81.71 2462 -0.82 4.43 5.25 -0.82 82.72 2467 -0.82 4.49 5.31 -0.82 82.81 2472 -0.86 4.54 5.40 -0.86 82.07 2477 -0.95 4.47 5.42 -0.95 80.40 2482 -1.04 4.42 5.45 -1.04 78.77 2487 -1.12 4.40 5.51 -1.12 77.31 Sporton International (Kunshan) Inc. Page Number : 6 of 10 TEL : +86-512-57900158 Report Issued Date : Dec. 14, 2021 FAX : +86-512-57900958 Report Version …

Text truncated - open the document above for the full version.