2AT88-2000021194Smart Cooking Sensor

USER MANUAL Safera Sense PRO Safera Sense Wi-Fi Safera Sense BT Smart Cooking Sensor SLI 20.11.2020 22078_XX-G 2 1. Introduction 1.1. Introduction Congratulations for buying the Safera Sense Smart Cooking Sensor. This guide describes the use, installation, and maintenance of the three versions of the product: Sense BT, Sense Wi-Fi and Sense Pro. Before reading, please check the Safera website for an updated version of this user manual: www.safera.com/support. We wish you safe and enjoyable cooking. We wish you safe and enjoyable cooking! 1.2. Manufacturer Information The product is designed and manufactured by Safera, a Finnish company of experts in smart cooking. Safera Oy Tekniikantie 4 02150 Espoo, Finland Product support www.safera.com/support email: [email protected] | tel.: +358 40 1897 146 2. Information and Warnings 2.1. General Warnings • This device is designed to EN 50615 Category B - prevention of fires originating from overheating of oil in pans and pots on a hob. This device may not be suitable for fires originating from flammable materials left in proximity of the hob or on the hob. This device may not be suitable for fires originating from oven. • Using Safera Sense does not remove your responsibility of safe cooking. Read chapter 6 carefully for limitations. • Safera Sense does not replace statutory home fire alarms. Ensure that fire safety at your home follows the local regulations. • Flame cooking is prohibited under the cooker hood. Also, operating gas stove burners without pans is prohibited. • Safera Sense is meant for household use only. The appliance must not be used in professional kitchens or with cookers and hobs meant for professional use. • Safera Sense is not user serviceable. For safety and reliability reasons, do not disassemble the product. Contact Safera for all service needs. • Safera Sense controls the stove and/or oven only if it is equipped and correctly coupled with the optional Power Control Unit (PCU). 2.2. Additional warnings when paired with optional Power Control Unit (see chapter 5.) WARNING All electrical connections must be carried out by a qualified electrician. 3 If the connection cord is damaged, it must be replaced by the service personnel of the manufacturer or their representative to avoid hazards. If the appliance was stored in a cold space, it must be allowed to warm up to room temperature before connecting it to mains power. 2.3. Battery Safety Information Failure to follow the instructions below may cause the batteries to leak fluid and gas, or even explode: • Do not expose batteries to excessive heat, insert them with wrong polarity, or try to recharge them. • Always replace all batteries at once, using the same make, model and age for all batteries. • Do not leave empty batteries inside the device for prolonged periods. • Recycle the empty batteries according to local regulations, do not place in domestic waste. • If the leaked fluid gets into your eyes, do not rub them, as there is a risk of losing eyesight. Rinse your eyes with water and contact a physician immediately. • If the leaked fluid gets into your mouth, rinse with water and contact a physician immediately. • If the leaked fluid gets on your skin or clothes, rinse with copious amounts of water to prevent burns. 2.4. Laser Safety Information (Sense PRO only) The product contains two laser light sources: 1. Class 1 laser as part of the optical distance and gesture detection system. This is an invisible infrared laser, similar to commonly used autofocus lasers in (cell phone) cameras. It is directed from the sensor lens area towards the stove area. 2. Class 3R laser as part of the air quality sensor system. This rating applies only in a case where This laser is inside the product and not directly visible for the user during normal operation. Diffused reflections may be seen if the battery cover / mounting bracket is removed. Do not stare into these reflections closely or inspect them with optical instruments. Care must be taken to not damage or disassemble the sensor unit so that the laser source becomes fully exposed. In case of accidental enclosure damage which fully exposes the visible red laser beam, avoid direct eye exposure to the beam and do not inspect it with optical instruments. In such case, remove the batteries and discontinue the use of the product. 4 3. Main Features 3.1. Cooking Safety Safera Sense monitors the stove area and improves cooking safety by sounding an alarm with a red blinking light if it detects a potentially dangerous cooking situation. These situations may be, for example, an overheating pan or prolonged lack of human presence during cooking. When you hear the alarm, check the situation calmly. If there is no danger, you can silence the alarm by pressing the OK-button. In order to set up the Safera Sense to your hob and kitchen environment, Bluetooth connection to a mobile phone is required during the installation (see chapter 4.4). After the installation, Bluetooth is not required for cooking safety alarm functionality. With Sense Wi-Fi and Sense PRO, remote alarms can be enabled by setting up a Wi-Fi connection via Safera App (see chapter 4.4). Please note that not all possible hazards may be detected. Also note the limitations in chapters 2.1 and 11. 3.2. Air Quality (Sense PRO only) Safera Sense PRO indicates and monitors kitchen air quality. This functionality requires the Safera App and Bluetooth connection to a mobile phone. More accurate list of currently supported air quality sensors and values are available in the Safera App. 3.3. Smart Cooking Safera Sense’s smart cooking features helps you cook better and easier. These features include automated timers and temperature helpers. This functionality requires the Safera App and Bluetooth connection to a mobile phone. Additional features will be added via wireless software update from the Safera App. 3.4. Indication summary LED color Sound Function Red blinking, three times, fast Yes,…

Text truncated - open the document above for the full version.

Cover letter Date: May 3rd, 2022 From: To: Safera Oy Tekniikantie 4 B Espoo 02150 Finland Regulatory Certification Body DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Related to product: Type of equipment: Smart Cooking Sensor FCC ID: 2AT88-2000021194 Model name: IFU10B-PRO To whom it may concern: We, Safera Oy, hereby declares that the already certified model with FCC ID 2AT88-1000021194 has been only Software modified to enable WiFi and Zigbee functionalities. Then, the Bluetooth test report 2595ERM.004 according to FCC standards performed by DEKRA Certification, Inc. on January15th, 2020 remain applicable, valid and representative of the current model name under certification. We ́ve additionally performed new EMC report, RF Exposure evaluation and RF test reports for WLAN and Zigbee interfaces as well as partial Bluetooth measurements. Sincerely, PA __________________________ By: Mr Samuli Lintonen Title: R&D Director Company: Safera Oy Telephone: +358400800420 e-mail: [email protected]

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 64670RAN.002 2020-11-17 Test report No: NIE: 64670RAN.002 Assessment report RF EXPOSURE REPORT ACCORDING TO FCC 47 CFR Part 2.1091 ISED RSS-102 Issue 5:2015 (*) Identification of item under evaluation Smart Cooking Sensor (*) Trademark Safera (*) Model and /or type reference Sense PRO (Model code: IFU10B-PRO) (*) Other identification of the product HW version: B SW Version: 1.0.25 FCC ID: 2AT88-1000021194 (Sense PRO) (*) Features Bluetooth LE, 802.15.4 (ZigBee-type), Wi-Fi 802.1 b/g/n (HT20) (*) Manufacturer SAFERA OY Tekniikantie 4B, FI-02150 Espoo, Finland Test method requested, standard FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. ISED RSS-102 Issue 5 (2015-03) – Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) IEEE Std C95.3 TM -2002 (R2008). IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz–300 GHz Summary IN COMPLIANCE Approved by (name / position & signature) Miguel Lacave Antennas Lab Manager Date of issue 2020-11-17 Report template No FAN36_01 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 64670RAN.002 Page 2 of 11 2020-11-17 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Data provided by the client .......................................................................................................... 3 Identification of the client............................................................................................................. 3 Document history ........................................................................................................................ 3 General description of the device under evaluation ..................................................................... 4 RF Exposure Assessment result and verdict ............................................................................... 5 Appendix A: FCC RF Exposure information ................................................................................ 6 FCC RF Exposure evaluation ................................................................................................. 7 FCC MPE Evaluation ............................................................................................................. 8 Appendix B: ISED RF Exposure information ............................................................................... 9 ISED RF Exposure evaluation for mobile devices ................................................................. 10 ISED MPE Evaluation .......................................................................................................... 11 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 64670RAN.002 Page 3 of 11 2020-11-17 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification, S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification, S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification, S.A.U. at the time of performance of the test. DEKRA Testing and Certification, S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Assessment Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification, S.A.U. General conditions 1. This report is only referred to the item that has undergone the assessment. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification, S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification, S.A.U. and the Accreditation Bodies Data provided by the client The following data has been provided by the client: 1. Information relating to the description of the sample ("Identification of the item tested", "Trademark", "Model and/or type reference tested", “General description of the device”). 2. Maximum output power, maximum antenna gain and use distance information. DEKRA Testing and Certification S.A.U. declines any responsibility with respect to the information provided by the client and that may affect the validity of results. Identification of the client SAFERA OY Tekniikantie 4B, FI-02150 Espoo, Finland Document history Report number Date Description 64670RAN.002 2020-11-17 First release DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · Es…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 64670RRF.003A2 2022-06-14 ISED CABid: ES1909 Test Report No: NIE: 64670RRF.003A2 Test Report USA FCC Part 15.247, 15.209 CANADA RSS-247, RSS-Gen (*) Identification of item tested Smart Cooking Sensor (*) Trademark Safera (*) Model and /or type reference Sense Pro (Model code: IFU10B-PRO) Other identification of the product HW Version: B SW Version: 1.0.25 FCC ID: 2AT88-2000021194 (*) Features Bluetooth LE, 802.15.4 (ZigBee-type), Wi-Fi 802.11 b/g/n (HT20) Applicant SAFERA OY Tekniikantie 4 B, FI-02150 Espoo, Finland. Test method requested, standard USA FCC Part 15.247 (10-1-20) Edition: Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz. USA FCC Part 15.209 (10-1-20) Edition: Radiated emission limits; general requirements. CANADA RSS-247 Issue 2 (February 2017). CANADA RSS-Gen Issue 5, Amendment 2 (February 2021). Guidance for Performing Compliance Measurements on Digital Transmission System, Frequency Hopping Spread Spectrum System, and Hybrid Systems Devices Operating Under Section 15.247 of the FCC Rules. 558074 D01 Meas Guidance v05r02 dated April 2, 2019. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. Summary IN COMPLIANCE Approved by (name / position & signature) Rafael López EMC Consumer & RF Lab. Manager Date of issue 2022-06-14 Report template No FDT08_24 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 64670RRF.003A2 Page 2 of 60 2022-06-14 Index Competences and guarantees ...................................................................................................................... 3 General conditions ......................................................................................................................................... 3 Uncertainty ..................................................................................................................................................... 3 Data provided by the client ............................................................................................................................ 3 Usage of samples .......................................................................................................................................... 3 Test sample description ................................................................................................................................. 5 Identification of the client ............................................................................................................................... 6 Testing period and place ............................................................................................................................... 6 Document history ........................................................................................................................................... 6 Environmental conditions .............................................................................................................................. 6 Remarks and comments ................................................................................................................................ 7 Testing verdicts .............................................................................................................................................. 8 Summary ....................................................................................................................................................... 8 Appendix A: Test results. 802.11 bgn20 1x1. ................................................................................................ 9 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 64670RRF.003A2 Page 3 of 60 2022-06-14 Competences and guarantees DEKRA Testing and Certification S.A.U. is a testing laboratory accredited by the National Accreditation Body (ENAC -Entidad Nacional de Acreditación), to perform the tests indicated in the Certificate No. 51/LE 147. DEKRA Testing and Certification is a FCC-recognized accredited testing laboratory with appropriate scope of accreditation that covers the performed tests in this report. DEKRA Testing and Certification is an ISED-recognized accredited testing laboratory, CABid: ES1909, with the appropriate scope of accreditation that covers the performed tests in this report. In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification S.A.U. at the time of performance of the test. DEKRA Testing and Certification S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification S.A.U. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or impl…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: NIE: 64670RRF.004A1 Page 1 of 40 2021-12-23 ISED CABid: ES1909 Test Report No: NIE: 64670RRF.004A1 Test Report USA FCC Part 15.247, 15.209 CANADA RSS-247, RSS-Gen (*) Identification of item tested Smart Cooking Sensor (*) Trademark Safera (*) Model and /or type reference Sense Pro (Model code: IFU10B-PRO) Other identification of the product HW Version: B SW Version: 1.0.25 FCC ID: 2AT88-2000021194 (*) Features Bluetooth LE, 802.15.4 (ZigBee-type), Wi-Fi 802.11 b/g/n (HT20) Manufacturer SAFERA OY Tekniikantie 4 B, FI-02150 Espoo, Finland. Test method requested, standard USA FCC Part 15.247 (10-1-20 Edition): Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz. USA FCC Part 15.209 (10-1-20 Edition): Radiated emission limits; general requirements. CANADA RSS-247 Issue 2 (February 2017). CANADA RSS-Gen Issue 5 amendment 1 (March 2019). Guidance for Performing Compliance Measurements on Digital Transmission System, Frequency Hopping Spread Spectrum System, and Hybrid Systems Devices Operating Under Section 15.247 of the FCC Rules. 558074 D01 Meas Guidance v05r02 dated April 2, 2019. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. Summary IN COMPLIANCE Approved by (name / position & signature) Rafael López EMC Consumer & RF Lab. Manager Date of issue 2022-06-08 Report template No FDT08_24 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: NIE: 64670RRF.004A1 Page 2 of 40 2021-12-23 Index INDEX ........................................................................................................................................................................... 2 COMPETENCES AND GUARANTEES ....................................................................................................................... 3 GENERAL CONDITIONS ............................................................................................................................................. 3 UNCERTAINTY ............................................................................................................................................................ 3 DATA PROVIDED BY THE CLIENT ............................................................................................................................ 3 USAGE OF SAMPLES ................................................................................................................................................. 4 TEST SAMPLE DESCRIPTION ................................................................................................................................... 5 IDENTIFICATION OF THE CLIENT ............................................................................................................................. 6 TESTING PERIOD AND PLACE .................................................................................................................................. 6 DOCUMENT HISTORY ................................................................................................................................................ 6 ENVIRONMENTAL CONDITIONS ............................................................................................................................... 6 REMARKS AND COMMENTS ..................................................................................................................................... 7 TESTING VERDICTS ................................................................................................................................................... 8 SUMMARY .................................................................................................................................................................... 8 APPENDIX A: TEST RESULTS. 802.15.4 (ZIGBEE) .................................................................................................. 9 INDEX ......................................................................................................................................................................... 10 TEST CONDITIONS ................................................................................................................................................... 11 TEST CASES DETAILS ............................................................................................................................................. 14 FCC 47 CFR PART 15.247 / RSS-247 ..................................................................................................................... 14 RSS-247 5.2 (a) / FCC 15.247 (a) (2) 6 dB Bandwidth ...................................................................................... 14 RSS-247 5.4 (d) / FCC 15.247 (b) (3) Maximum Peak Conducted output power .............................................. 17 RSS-247 5.2 (b) / FCC 15.247 (e) Power Spectral Density ............................................................................... 20 RSS-247 5.5 / FCC 15.247 (d) Band-edge emissions compliance (Transmitter) .............................................. 23 RSS-247 5.5 / FCC 15.247 (d) Emission limitations radiated (Transmitter) ....................................................... 28 Occupied Channel Bandwidth 99% .................................................................................................................... 38 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: NIE: 64670RRF.004A1 Page 3 of 40 2021-12-23 Competences and guarantees DEKRA Testing and Certification S.A.U. is a testing laboratory accredited by the National Accreditati…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: NIE: 64670RRF.005 Page 1 of 15 2021-12-23 ISED CABid: ES1909 Test Report No: NIE: 64670RRF.005 Partial Test Report USA FCC Part 15.247, 15.209 CANADA RSS-247, RSS-Gen (*) Identification of item tested Smart Cooking Sensor (*) Trademark Safera (*) Model and /or type reference Sense Pro (Model code: IFU10B-PRO) Other identification of the product HW Version: B SW Version: 1.0.25 FCC ID: 2AT88-2000021194 (*) Features Bluetooth LE, 802.15.4 (ZigBee-type), Wi-Fi 802.11 b/g/n (HT20) Manufacturer SAFERA OY Tekniikantie 4 B, FI-02150 Espoo, Finland. Test method requested, standard USA FCC Part 15.247 (10-1-20 Edition): Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz. USA FCC Part 15.209 (10-1-20 Edition): Radiated emission limits; general requirements. CANADA RSS-247 Issue 2 (February 2017). CANADA RSS-Gen Issue 5 amendment 1 (March 2019). Guidance for Performing Compliance Measurements on Digital Transmission System, Frequency Hopping Spread Spectrum System, and Hybrid Systems Devices Operating Under Section 15.247 of the FCC Rules. 558074 D01 Meas Guidance v05r02 dated April 2, 2019. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. Approved by (name / position & signature) Rafael López EMC Consumer & RF Lab. Manager Date of issue 2021-12-23 Report template No FDT08_23 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: NIE: 64670RRF.005 Page 2 of 15 2021-12-23 Index INDEX ........................................................................................................................................................................... 2 COMPETENCES AND GUARANTEES ....................................................................................................................... 3 GENERAL CONDITIONS ............................................................................................................................................. 3 UNCERTAINTY ............................................................................................................................................................ 3 DATA PROVIDED BY THE CLIENT ............................................................................................................................ 3 USAGE OF SAMPLES ................................................................................................................................................. 4 TEST SAMPLE DESCRIPTION ................................................................................................................................... 5 IDENTIFICATION OF THE CLIENT ............................................................................................................................. 6 TESTING PERIOD AND PLACE .................................................................................................................................. 6 DOCUMENT HISTORY ................................................................................................................................................ 6 ENVIRONMENTAL CONDITIONS ............................................................................................................................... 6 REMARKS AND COMMENTS ..................................................................................................................................... 7 TESTING VERDICTS ................................................................................................................................................... 8 SUMMARY .................................................................................................................................................................... 8 APPENDIX A: TEST RESULTS. BLUETOOTH 5.0 (1 & 2 MBPS): ............................................................................ 9 INDEX ......................................................................................................................................................................... 10 TEST CONDITIONS ................................................................................................................................................... 11 TEST CASES DETAILS ............................................................................................................................................. 12 RSS-247 5.4 (d) / FCC 15.247 (b) (3) Maximum Peak Conducted output power .............................................. 12 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas…

Text truncated - open the document above for the full version.