2AT9Z-EC3-750Dual-band Gigabit Wi-Fi extender

1-5 10 8 The repeater has founctions: repeater , router and Access Point. We describe the setup as wifi repeater in details. So firstly make sure the mode switch is in the repeater mode. There are two ways to set up this device as wifi repeater, with WPS or without WPS. If you want to setup with WPS button, please make sure that the other device(that you want to conect with) has also a WPS button. 1.Connect the wifi repeater to your exsiting router by WPS button.(go to point 2 if your exsiting router does not have WPS) a.Plug the Wifi repeater into a power outlet near your exsiting router (not too far away from your router) and wait for the repeater to start up. b.Press WPS button on your exsiting router (usually press the WPS button for 3 seconds, consult the manual of your exsiting router). c.Activate WPS on the Wifi repeater by pressing the WPS button for over 5 seconds. d.The Wifi repeater will connect to your exsiting router. This will take some time, please wait at least 2 minutes. 2.Connect the Wifi repeater to your exsiting router without WPS. a. Plug the Wifi repeater into a power outlet near your exsiting router (not too far away from your router) and wait for the repeater to start up. b.The Wifi repeater will need to know to which Wifi network it should be connected and what the password is. Therefore, it is necessary to set the Wifi . You will need a network cable. Plug one side of the cable in the Wifi repeater(LAN port) and plug the other end in your PC. You may need to temporarily disconnect the existing Internet cable. c.Enter 192.168.3.1 in your web browser (do not use Google, enter it in the URL bar). d.Enter admin in both the name and password field. e.The following screen will appear. Click on “Repeater Wizard”. Click on Repeater Wizard 7 6 9 1 POWER LED 2. WAN/LAN LED 3. LAN LED 4. 2.4G Signal LED 5. 5G Signal LED 6. POWER ON/OFF Switch . 7. RESET Button 8. WPS Button 9. Mode Switch(Repeater mode,Router mode,AP mode) 10. WiFi Signal Strength Indicator 11. LAN Port 12. WAN/LAN Port LEDStatus Meaning 2.4G Signal/5G Signal POWER WiFi Signal Strength Indicator LED off LED flashing LED off LED on One LED on Two LEDs on Three LEDs on LED on LED off LAN& LAN/WAN No wifi signal Transferring data Power off Power on Weak reception, strength below 25 % Good reception,strength 50%~75% Excellent reception, strength above 75% Cable connection ok Cable connection not ok Model No: EC3-750 WAN LAN LAN 1211 Before Setting Tech Support To customize your wireless network connection and www.juplink.com to download RX4-1800 User Guide for more information. Operating Conditions Working Temperature: 0~45°C / 32~113°F Working Humidity: 10%~90% RH (non-condensing) Storage Temperature:-40~85°C / -40~185°F Storage Humidity: 5%~95% RH (non-condensing) us and we’re glad to assist you. Tell: +1(833)923-2468 (Toll Free) If you have any questions about the product,Please reach out to other advanced repeater settings, please go to Email: [email protected] Service Time: 09:00-17:00(EST)/ 06:00-14:00(PDT) FCC ID:2AT9Z-EC3-750 f. All available Wifi networks will be shown in a screen like the one shown here. g.Select your network by clicking on the circle in the column “Choose” and enter your password details. h.Click the “Save” button (at the bottom). The settings are now being saved, that is why the repeater will ask you to wait for 90 seconds. Afterwards you can remove the internet cable, and install the Wifi repeater at the selected location. 3.Connect your laptop, mobile phone or tablet to the Wifi repeater a.You can now insert the Wifi repeater in the selected power outlet. Once again, this will take some time. Wait at least 2 minutes after insertion. b.Search for new Wifi connections from your mobile device, e.g. laptop, phone or tablet. Select the SSID with -ext at the end(for example, if your exsiting router has SSID AB, select AB_2.4G_ext AB_5G_ext , ). The 5GHz connection is quicker and will automatically select wifi-AC if this is available on both devices. c.The password will be the same as your existing router. 4.Connect an end device to the Wifi repeater using WPS a.End devices are e.g. PC, mobile phone, tablet or IP camera. Activate WPS on the end device according to the manual of the device. b.Press the WPS button on the Wifi repeater for less than 3 seconds. c.The devices will now connect. After about 2 minutes, the connection works. Q1: What should I do if my router does not have a WPS button? A: Please follow instructions on option two - to set up using the browser. Q2: How to Reset to defaults? A: While the power is still on, keep pressing the reset button on the right side of the product for 5 to 10 seconds, and it will restore to factory settings. Q3: Why cannot I see the login page after entering http://192.168.3.1 in the browser? A: Make sure your PC or phone is connected to the extender network and has disconnected from any other network. Also please make sure your PC or phone is set to Q4: My signal from the range extender is weak, and keeps dropping off. A: Please place the extender in a proper location, i.e. where a minimum of 3 router signal strength bar is shown (please check the signal strength of that specific location with your phone or PC) FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct t…

Text truncated - open the document above for the full version.

NanjingJuplinkIntelligentTechnologiesCo.,Ltd. Ad-HocCountryCodeCoverLetter We,<NanjingJuplinkIntelligentTechnologiesCo.,Ltd.>,declarethatthisEUT(FCCID: 2AT9Z-EC3-750)doesn’thaveAdHocModefunctionon“non-USfrequencies”.In addition,thefrequencyselectionfeatureisdisablebyfirmwarefordevicemarketed totheUS.ForDTSpartofthisdevice,onlychannel1~11willbeusedinNorth America.Countrycodeselectionisdisabled. Shouldyouhaveanyquestionsorcommentsregardingthismatter,pleasehavemy bestattention. Sincerelyyours, ___________________ JamesXiong Companyname：NanjingJuplinkIntelligentTechnologiesCo.,Ltd. Tel:+8613823169517 Fax:025-83677687 Email:[email protected]

NanjingJuplinkIntelligentTechnologiesCo.,Ltd. UNIIDeclarationLetter WehavedeclaredbelowfeaturedforFCCequipmentauthorization,deviceFCCID:2AT9Z-EC3-750 (1)DFSDevice--Master,ClientwithRadardetectioncapability, Clientwithoutradardetectioncapability,N/A (2)Active/PassiveScanning,adhocmodeaccesspointcapability FrequencyBand (MHz) ActiveScanning (thedevicecan transmitaprobe (beacon)) passivescanning (wherethedevice is canlistenonly withno probes) AdHocMode capability Accesspoint capability 2412–2462MHzYes,NoYes,NoYes,NoYes,No 2422–2452MHzYes,NoYes,NoYes,NoYes,No 5745–5825MHzYes,NoYes,NoYes,NoYes,No 5755–5795MHzYes,NoYes,NoYes,NoYes,No 5180–5240MHzYes,NoYes,NoYes,NoYes,No 5190–5230MHzYes,NoYes,NoYes,NoYes,No 5260–5320MHzYes,NoYes,NoYes,NoYes,No 5270–5310MHzYes,NoYes,NoYes,NoYes,No 5500–5700MHzYes,NoYes,NoYes,NoYes,No 5510–5670MHzYes,NoYes,NoYes,NoYes,No (3)Countrycodeselectionability-Yes,No Ifno,plsexplainhowwasimplemented:useMicrosoftnetworkutility (4)Meet15.202requirement-Yes,No, plscheckbelow: Amasterdeviceisdefinedasadeviceoperatinginamodeinwhichithasthecapabilityto transmitwithoutreceivinganenablingsignal.Inthismodeitisabletoselectachannelandinitiatea networkbysendingenablingsignalstootherdevices Aclientdeviceisdefinedasadeviceoperatinginamodeinwhichthetransmissionsofthedevice areundercontrolofthemaster.Adeviceinclientmodeisnotabletoinitiateanetwork. (5)Forclientdevicesthathavesoftwareconfigurationcontroltooperateindifferentmodes(active scanninginsomeandpassivescanninginothers)indifferentbands(deviceswithmultipleequipment classesorthosethatoperateonnon-DFSfrequencies)ormodulardeviceswhichconfigurethemodes ofoperationsthroughsoftware,theapplicationmustprovidesoftwareandoperationsdescriptionon howthesoftwareand/orhardwareisimplementedtoensurethatproperoperationsmodescannot bemodifiedbyenduseroraninstaller. Apply,NoApply, (Ifapply,plshelptoprovideexplanationonhowitwasimplement(Byhardwareorsoftware,andhowsoftwarewascontrolled) Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Yourssincerely, Signatory PrintedName Position

Page 1 of 3Ref:KDB594280D02U-NII/RSS-247article6.4(4). SOFTWARESECURITYINFORMATION FCCID:2AT9Z-EC3-750 Pursuantto: FCCPart15E15.407(I)andKDB594280D02UNIIDeviceSecurityv01r03/ICRSS-247article6.4(4). TheinformationwithinthissectionistoshowcomplianceagainsttheSWSecurityRequirementslaidoutwithin KDB594280D02U-NIIDeviceSecurityv01r03.Theinformationbelowdescribeshowtomaintaintheoverall securitymeasuresandsystemssothatonly: 1.Authenticatedsoftwareisloadedandoperatingonthedevice. 2.ThedeviceisnoteasilymodifiedtooperatewithRFparametersoutsideoftheauthorization. SOFTWARESECURITYDESCRIPTION RequirementAnswer G e n e r a l D e s c r i p t i o n 1. Describehowanysoftware/firmwareupdatesfor elementsthancanaffectthedevice’sRF parameterswillbeobtained,downloaded, validatedandinstalled.Forsoftwarethatis accessedthroughmanufacturer’swebsiteor device’smanagementsystem,describethe differentlevelsofsecurityasappropriate. ThefactoryfirmwareisproducedbyGrantee anditisdeliveredtothefactoryviaasecured channel.Thefactoryloadsthefirmwaretothe deviceontheproductionlinewithspecialized toolsnotavailabletoconsumers.Aftersetting upthedevicebytheuserforthefirstuseall firmwareupgradesareautomatically deliveredfromGrantee’ssecureSW repositoryviaasecureupgrade channel(encryptedanddigitallysigned)that preventsanytampering.Theusercannot installanyfirmwarenotauthorizedby Grantee. 2. DescribetheRFparametersthataremodifiedby anysoftware/firmwarewithoutanyhardware changes.Aretheseparametersinsomeway limitedsuchthatanyothersoftware/firmware changeswillnotallowthedevicetoexceedthe authorizedRFcharacteristics? Radioparametersarefixedattimeof productionasrequiredbytheFCC certification.Anyfuturesoftware/firmware releaseisverifiedbytheGranteebefore release.Ifrequired,Granteewillfollow FCCpermissivechangeprocedure. 3.Describeindetailtheauthenticationprotocols thatareinplacetoensurethatthesourceofthe RF-relatedsoftware/firmwareisvalid.Describe indetailhowtheRF-relatedsoftwareis protectedagainstmodification. Yes,software/firmwareisdigitallysigned andencryptedusingproprietary handshaking,authorizationandprovisioning protocols. 4. Describeindetailanyencryptionmethodsusedto supporttheuseoflegitimateRF-related software/firmware. Yes,seeanswersto#1and#3. 5.Foradevicethatcanbeconfiguredasamaster andclient(withactiveorpassivescanning), explainhowthedeviceensurescompliancefor eachmode?Inparticularifthedeviceactsas masterinsomebandofoperationandclientin another;howiscomplianceensuredineach bandofoperation? ThisdeviceonlysupportsClientmode,please refertotestreportXM20060025W01/02for complianceensuredineachbandof operation. Page 2 of 3Ref:KDB594280D02U-NII/RSS-247article6.4(4). RequirementAnswer T h i r d P a r t y A c c e s s C o n t r o l 1.Explainifanythirdpartieshavethecapability tooperateaU.S./Canada-solddeviceonany otherregulatorydomain,frequencies,orin anymannerthatmayallowthedeviceto operateinviolationofthedevice’s authorizationifactivatedintheU.S./Canada. OnlyGranteecanreleaseormakechanges tothesoftware/firmwareusingproprietary secureprotocols 2.Describe,ifthedevicepermitsthird-party softwareorfirmwareinstallation,what mechanismsareprovidedbythe manufacturertopermitintegrationofsuch functionswhileensuringthattheRF parametersofthedevicecannotbeoperated outsideitsauthorizationforoperationinthe U.S./Canada.Inthedescriptionincludewhat controlsand/oragreementsareinplacewith providersofthird-partyfunctionalityto ensurethedevices’underlyingRF parametersareunchangedandhowthe manufacturerverifiesthefunctionality. No,refertotheanswers#1,2,and3under GeneralDescription 3.ForCertifiedTransmittermodulardevices, describehowthemodulegranteeensures thathostmanufacturersfullycomplywith thesesoftwaresecurityrequirementsforU- NIIdevices.Ifthemoduleiscontrolled throughdriversoftwareloadedinthehost, describehowthedriversarecontrolledand managedsuchthatthemodulartransmitter RFparametersarenotmodifiedoutsidethe grantofauthorization. Notapplicable,thisdeviceisnotamodular. Thissectionisrequiredfordeviceswhichhavea“UserInterface”(UI)toconfigurethedeviceinamannerthat mayimpacttheoperationalparameter.Theoperationdescriptionmustaddressifthedevicesupportsanyofthe countrycodeconfigurationsorpeer-peermodecommunicationsdiscussedinKDB594280D01. SOFTWARECONFIGURATIONDESCRIPTION RequirementAnswer U S E R C O N F I G U R A T I O N G U I D E 1.Describetheuserconfigurationspermitted throughtheUI.Ifdifferentlevelsofaccessare permittedforprofessionalinstallers,system integratorsorend-users,describethe differences. OnlytheEnduserconfigurationispermitted. 1.TheradioparametersarenotaccessiblethroughaUI toanyoperatingparty. 2.EndusersareonlyabletoenteraUIthatallows connectiontoanestablishedAPnetworkand WPSconfiguration. a)Whatparametersareviewableandconfigurable bydifferentparties? Nonethataffectscompliance b)Whatparametersareaccessibleormodifiable bytheprofessionalinstallerorsystem integrators? Nonethataffectscompliance (1)Aretheparametersinsomewaylimited,so thattheinstallerswillnotenterparametersthat exceedthoseauthorized? Notapplicableasthesetypesofsettingsarenot accessibletoanyoperatingparty. (2)Whatcontrolsexistthattheusercannot operatethedeviceoutsideitsauthorizationin theU.S./Canada? Thedevicedoesnotallowthird-partyaccessto software/firmwareparametersorconfigurations includingoperationoutsidethescopeofFCC Page 3 of 3Ref:KDB594280D02U-NII/RSS-247article6.4(4). authorization. c)Whatparametersareaccessibleormodifiable bytheend-user? Nonethataffectscompliance (1)Aretheparametersinsomewaylimited,so thattheuserorinstallerswillnotenter parametersthatexceedthoseauthorized? Notapplicable (2)Whatcontrolsexistsothattheusercannot operatethedeviceoutsideitsauthorizationin theU.S./Canada? Thedevicedoesnotallowthird-partyaccessto software/firmwareparametersorconfigurations includingoperationoutsidethescopeofFCC authorization. d)Isthecountrycodefactoryset?Canitbe changedintheUI? Thecountrycodeishardcodedintothedevice firmwareandcannotbechangedintheUI. (1)Ifitcanbechanged,whatcontrolsexistto en…

Text truncated - open the document above for the full version.

Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page 1 of 4 FCCID:2AT9Z-EC3-750 ExternalPhotos Allsampleview EUTunittopview Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page 2 of 4 EUTunitbottomview EUTunitfrontview Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page 3 of 4 EUTunitbackview EUTunitsideview Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page 4 of 4 EUTunitsideview

FCCID ： 2AT9Z-EC3-750 1 、 Label ： 2 、 LabelLocation ： Label Location

Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page1of4 FCCID：2AT9Z-EC3-750 InternalPhotos 1.uncoverview Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page2of4 Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page3of4 Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page4of4 2.Antennaview InternalAntenna0_5G InternalAntenna1_2.4G InternalAntenna0_2.4G

NOTE:1.Thereportisinvalidwhenthereisnotheapproversignatureandthespecialstampfortestreport.2.Thetestreport shallnotbereproducedexceptinfullwithoutpriorwrittenpermissionofthecompany.3.Thereportcopyisinvalidwhenthereis nothespecialstampfortestrepor.4.Thealteredreportisinvalid.5.Theentrusttestisresponsibilityforthereceivedsample only. Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 REPORTNo.：XM200060025W03 RFEXPOSURE EVALUATIONREPORT APPLICANT:NanjingJuplinkIntelligentTechnologiesCo.,Ltd. PRODUCTNAME:Dual-bandGigabitWi-Fiextender MODELNAME:EC3-750 BRANDNAME:JupLink FCCID: 2AT9Z-EC3-750 STANDARD(S): 47CFR§2.1091;KDB447498D01v06 RECEIPTDATE : 2020-06-18 TESTDATE:2020-06-18to2020-07-03 ISSUEDATE:2020-07-23 Editedby: Pengfuwei(Testengineer) Reviewby: ElvisWang(Auditor) Approvedby: AnneLiu(Supervisor) Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page20f6 REPORTNo.：XM200060025W03 DIRECTORY 1.TechnicalInformation ····················································································· 3 1.1.ApplicantandManufacturerInformation ························································· 3 1.2.EquipmentUnderTest(EUT)Description ························································ 3 1.3.AppliedReferenceDocuments ······································································ 3 2.DevicecategoryandRFexposurelimit ····························································· 4 3.RFExposureEvaluation ·················································································· 5 AnnexAGeneralInformation ················································································ 6 ChangeHistory IssueDateReasonforchange 1.02020-07-23Firstedition Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page30f6 REPORTNo.：XM200060025W03 1.TechnicalInformation Note:Providebymanufacturer. 1.1.ApplicantandManufacturerInformation Applicant: NanjingJuplinkIntelligentTechnologiesCo.,Ltd. ApplicantAddress: No.757,DixiuRoad,BinjiangEconomicDevelopmentZone, JiangningDistrict,Nanjing Manufacturer: SichuanTianyiComheartTelecomCo.,Ltd. ManufacturerAddress: No.198,Section1,XueshanAvenue,DayiCounty,Chengdu, Sichuan,China 1.2.EquipmentUnderTest(EUT)Description ProductName:Dual-bandGigabitWi-Fiextender HardwareVersion:V1.0.1 SoftwareVersion:V1.0.0 FrequencyBands: 802.11b/g/n-20MHz:2.412GHz-2.462GHz 802.11n-40MHz:2.422GHz-2.452GHz 802.11ac(HT20),802.11ac(HT40),802.11ac(HT80) 802.11a,802.11n(HT20),802.11n(HT40) ModulationMode:DSSS,OFDM Antennatype: DipoleAntenna AntennaGain: Ant2dBi 1.3.AppliedReferenceDocuments Leadingreferencedocumentsfortesting: No.IdentityDocumentTitle 147CFR§2.1091RadiofrequencyRadiationExposureEvaluation:mobile devices 2KDB447498D01v06GeneralRFExposureGuidance Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page40f6 REPORTNo.：XM200060025W03 2.DevicecategoryandRFexposurelimit Perusermanual,Basedon47CFR2.1091,thisdevicebelongstomobiledevicecategorywith GeneralPopulation/Uncontrolledexposure. MobileDevices: 47CFR2.1091(b) Forpurposesofthissection,amobiledeviceisdefinedasatransmittingdevicedesignedtobe usedinotherthanfixedlocationsandtogenerallybeusedinsuchawaythataseparationdistance ofatleast20centimetersisnormallymaintainedbetweenthetransmitter'sradiatingstructure(s) andthebodyoftheuserornearbypersons.Inthiscontext,theterm“fixedlocation”meansthatthe deviceisphysicallysecuredatonelocationandisnotabletobeeasilymovedtoanotherlocation. Transmittingdevicesdesignedtobeusedbyconsumersorworkersthatcanbeeasilyre-located, suchaswirelessdevicesassociatedwithapersonalcomputer,areconsideredtobemobile devicesiftheymeetthe20centimeterseparationrequirement. GENERALPOPULATION/UNCONTROLLEDEXPOSURE Thegeneralpopulation/uncontrolledexposurelimitsareapplicabletosituationsinwhichthe generalpublicmaybeexposedorinwhichpersonswhoareexposedasaconsequenceoftheir employmentmaynotbemadefullyawareofthepotentialforexposureorcannotexercisecontrol overtheirexposure.Membersofthegeneralpublicwouldcomeunderthiscategorywhen exposureisnotemployment-related;forexample,inthecaseofawirelesstransmitterthat exposespersonsinitsvicinity.Warninglabelsplacedonlow-powerconsumerdevicessuchas cellulartelephonesarenotconsideredsufficienttoallowthedevicetobeconsideredunderthe occupational/controlledcategory,andthegeneralpopulation/uncontrolledexposurelimitsapplyto thesedevices. TABLE1—LIMITSFORMAXIMUMPERMISSIBLEEXPOSURE(MPE) Frequency range (MHz) Electricfield strength (V/m) Magneticfield strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3-1.346141.63*(100)30 1.34-30824/f2.19/f*(180/f 2 )30 30-30027.50.0730.230 300-1500--f/150030 1500-100,000--1.030 f=frequencyinMHz*=Plane-waveequivalentpowerdensity Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page50f6 REPORTNo.：XM200060025W03 3. RFExposureEvaluation StandalonetransmissionMPEevaluation Mode Frequency Maximum conductedoutput power Power density(S) Limitfor MPE (MHz)(dBm)(mW)(mW/cm²)(mW/cm²) 802.11bANT0246217.14103.2760.0211.0 802.11bANT1243717.21104.9540.0211.0 802.11n40ANT0+ANT1243719.32170.6080.0341.0 802.11aANT0524016.1482.0350.0161.0 AccordingtoKDB447498D01GeneralRFExposureGuidancev06,simultaneous transmissionisevaluated: SimultaneoustransmissionMPEtestexclusionapplieswhenthesumoftheMPEratiosforall simultaneouslytransmittingantennasincorp…

Text truncated - open the document above for the full version.

NOTE: 1.Thereportisinvalidwhenthereisnotheapproversignatureandthespecialstampfortestreport.2.Thetestreport shallnotbereproducedexceptinfullwithoutpriorwrittenpermissionofthecompany.3.Thereportcopyisinvalidwhenthereis nothespecialstampfortestrepor.4.Thealteredreportisinvalid.5.Theentrusttestisresponsibilityforthereceivedsample only . Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page 1 0f 152 REPORTNo.：XM20060025W02 TESTREPORT APPLICANT :NanjingJuplinkIntelligentTechnologiesCo.,Ltd. PRODUCTNAME:Dual-bandGigabitWi-Fiextender MODELNAME:EC3-750 BRANDNAME:JupLink FCCID:2AT9Z-EC3-750 STANDARD(S):47CFRPart15SubpartE RECEIPTDATE :2020-06-18 TESTDATE:2020-06-18to2020-07-03 ISSUEDATE:2020-07-24 Editedby: BowersZeng(Testengineer) Reviewby: ElvisWang(Auditor) Approvedby: AnneLiu(Supervisor) Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page20f152 REPORTNo.：XM20060025W02 DIRECTORY 1.TechnicalInformation...............................................................................................................3 1.1.ApplicantandManufacturerInformation.........................................................................3 1.2.EquipmentUnderTest(EUT)Description.......................................................................3 1.3.ModulationTypeandDataRateofEUT...........................................................................4 1.4.ThechannelnumberandfrequencyofEUT ................................................................... 5 1.5.TestStandardsandResults ................................................................................................ 6 1.6.EnvironmentalConditions ................................................................................................... 6 2.47CFRPart15ERequirements ............................................................................................. 7 2.1.Antennarequirement ............................................................................................................. 7 2.2.EmissionBandwidth.............................................................................................................8 2.3.Maximumconductedoutputpower................................................................................26 2.4.PeakPowerspectraldensity............................................................................................30 2.5.RestrictedFrequencyBands............................................................................................48 2.6.FrequencyStability..............................................................................................................65 2.7.ConductedEmission...........................................................................................................67 2.8.RadiatedEmission...............................................................................................................71 2.9.Automaticallydiscontinuetransmissionrequirement ............................................ 148 AnnexATestUncertainty ........................................................................................................ 149 AnnexBTestingLaboratoryInformation ............................................................................ 150 ChangeHistory VersionDateReasonforchange 1.02020-07-24Firstedition Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page30f152 REPORTNo.：XM20060025W02 1.TechnicalInformation Note:Providebyapplicant. 1.1.ApplicantandManufacturerInformation Applicant:NanjingJuplinkIntelligentTechnologiesCo.,Ltd. ApplicantAddress:No.757,DixiuRoad,BinjiangEconomicDevelopmentZone, JiangningDistrict,Nanjing Manufacturer:SichuanTianyiComheartTelecomCo.,Ltd. ManufacturerAddress:No.198,Section1,XueshanAvenue,DayiCounty,Chengdu, Sichuan,China 1.2.EquipmentUnderTest(EUT)Description ProductName: Dual-bandGigabitWi-Fiextender SerialNo:(N/A,marked#1bytestsite) HardwareVersion:V1.0.1 SoftwareVersion:V1.0.0 ModulationType: OFDM ModulationMode: 802.11ac(HT20),802.11ac(HT40),802.11ac(HT80) 802.11a,802.11n(HT20),802.11n(HT40) OperatingFrequencyRange: 5.180GHz-5.240GHz;5.725GHz-5.850GHz ChannelNumber: Referto1.3 AntennaType: DipoleAntenna AntennaGain: Ant2dBi Note1:TheU-NIIbandisapplicabletothisreport,anotherbandsofoperation(2.4GHz)is documentedinaseparatereport. Note2:Duringtest,thedutycycleoftheEUTwassettingto100%. Note3:Foramoredetaileddescription,pleaserefertoSpecificationorUser’sManualsuppliedby theapplicantand/ormanufacturer. Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page40f152 REPORTNo.：XM20060025W02 1.3.ModulationTypeandDataRateofEUT ModulationtechnologyModulationTypeDataRate(Mbps)Note1 OFDM(802.11a) BPSK6/9 QPSK12/18 16QAM24/36 64QAM48/54 OFDM(802.11ac) BPSK6.5 QPSK13/19.5 16QAM26/39 64QAM52/58.5/65 256QAM78 OFDM(802.11n) BPSK6.5 QPSK13/19.5 16QAM26/39 64QAM52/58.5/65 Note1:Theworst-casemode(blackbold)inalldatarateshasbeendeterminedduringthe pre-scan,onlythetestdataoftheworst-casewererecordedinthisreport. Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page50f152 REPORTNo.：XM20060025W02 1.4.ThechannelnumberandfrequencyofEUT FrequencyRange:5180-5240MHz BandwidthChannelFrequency(MHz)ChannelFrequency(MHz) 20MHz 365180405200 445220485240 40MHz385190465230 80MHz425210// FrequencyRange:5725-5850MHz BandwidthChannelFrequency(MHz)ChannelFrequency(MHz) 20MHz 14957451535765 15757851615805 165…

Text truncated - open the document above for the full version.

Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page370f152 REPORTNo.：XM20060025W02 (Channel157,5785MHz,802.11n) (Channel165,5825MHz,802.11n) Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page380f152 REPORTNo.：XM20060025W02 802.11n(HT40)Testmode A.TestVerdict: Channel Frequency (MHz) MeasuredPSD (dBm/MHz) Limit (dBm/MHz) Verdict 385190 4.04 11PASS 465230 5.12 Channel Frequency (MHz) MeasuredPSD (dBm/500KHz) Limit (dBm/500KHz) Verdict 1515755 -0.30 30PASS 1595795 -0.93 B.TestPlots (Channel38,5190MHz,802.11n(HT40)) Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page390f152 REPORTNo.：XM20060025W02 (Channel46,5230MHz,802.11n(HT40)) (Channel151,5755MHz,802.11n(HT40)) Kehu-Morlab TestLaboratory XIAMENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. Unit101,No.1732GangzhongRoad,XiamenArea,PilotFreeTradeZone(Fujian),P.R.China Tel:+865925612050 Fax:+865925612095 Page400f152 REPORTNo.：XM20060025W02 (Channel159,5795MHz,802.11n(HT40)) 802.11ac20Testmode E.TestVerdict: Channe…

Text truncated - open the document above for the full version.