2ATOQ-G20Robotic Vacuum Cleaner

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. •Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. • Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.

SCS-F18:ProjectandProductCertificationRepresentativeAuthorizationLetterPage1of2Rev6.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email: [email protected] ProjectandProduct Certification Representative AuthorizationLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 Revisedwording(obsolete)1.02.0Sept–25-2007 Updatedcompanytemplate(obsolete)2.03.0Jan-31-2012 Updatedletterinformation(obsolete)3.04.0May-23-2014 AddedFCCIDfield(obsolete)4.05.0Sep-16-2014 Updatedcompanyname&logo(current)5.06.0Jun-27-2018 SCS-F18:ProjectandProductCertificationRepresentativeAuthorizationLetterPage2of2Rev6.0 DongguanXinsuTechnologyCo.,Ltd. (2020-07-21) To:BVCPS,INC. 775MontagueExpressway, Milpitas,CA95035 USA DearSir/Madam, Re:ProductCertificationRepresentativeAuthorizationLetter We,_____DongguanXinsuTechnologyCo.,Ltd.___herebyauthorizeBVCPS, Inc.toactasaCertificationBodyforcertifyingforthefollowingproject(s): Product::RoboticVacuumCleaner M/N:G20,G21,G22,G23,G24,G25,G26,G27,G28,G29,KK3,KK31 FCCID:2ATOQ-G20 Sincerely, zhenhuaZhao QCManager DongguanXinsuTechnologyCo.,Ltd. Room106,ChuangtouBuilding,No.8IndustrialSouthRoad,SongshanLake High-techIndustrialDevelopmentZone,Donggua

SCS-F19:ConfidentialityRequestLetterPage 1 of 2 Rev6.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email: [email protected] m Confidentiality RequestLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 AddingCFR2.459(obsolete)1.02.0August–11-2008 Updatedcompanytemplate&Addedtext box(obsolete) 2.03.0Jan-31-2012 AddedICconfidentialityletterform (obsolete) 3.04.0March-26-2015 CorrectionstoSTCform.Addedreference toKDB(obsolete) 4.05.0Nov-19-2015 Updatedcompanylogo(current)5.06.0Jun-26-2019 SCS-F19:ConfidentialityRequestLetterPage 2 of 2 Rev6.0 DongguanXinsuTechnologyCo.,Ltd. (2020-7-21) To: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD Subject:PermanentConfidentialityRequestforFCCID:2ATOQ-G20 Pursuanttosections0.457and0.459ofCFR47,werespectfullyrequestpermanent confidentialtreatmentofthefollowingExhibitsaccompanyingthisapplicationas: -BlockDiagram -Schematics -OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. Theapplicantunderstandsthatdisclosureofthisapplicationandallaccompanying documentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerely, zhenhuaZhao QCManager DongguanXinsuTechnologyCo.,Ltd. Room106,ChuangtouBuilding,No.8IndustrialSouthRoad,SongshanLakeHigh-tech IndustrialDevelopmentZone,Donggua

SCS-F190WiFiChannel12&13DeclarationLetterPage 1 of2Rev.2.0 CreatedbyWilliamGraffApprovedbyBao-ThuongNguyen WIFIChannel12and13 DeclarationLetter ReasonforAmendment RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)Initial1.0December22,2015 Modifytheselectoptions(current)1.02.0September23,2016 SCS-F190WiFiChannel12&13DeclarationLetterPage 2 of2Rev.2.0 CreatedbyWilliamGraffApprovedbyBao-ThuongNguyen DongguanXinsuTechnologyCo.,Ltd. WIFIChannel12and13DeclarationLetter WedeclaretheequipmentidentifiedbelowwithregardstoChannel12and13capabilitiesfor FCCID:2ATOQ-G20 Declaration ProducthardwaredoesnothavethecapabilitytooperateonChannel 12and13.  ProducthardwarehasthecapabilitytooperateonChannel12and13. However,thesetwochannelswillbedisabledviasoftwareandwillnot beaccessibletouser. ProducthardwarehasthecapabilitytooperateonChannel12and13. However,alltheoperatedchannelscan’tbechangedintheRF parameterviasoftware.Allchannelshavecompliedwithallofthe requirementssetsoutinFCCPart15.247. ProducthardwarehasthecapabilitytooperateonWiFiChannel12 and13,andmeetstherequirementsofKDB594280D01v02r01. Pleasenote: 1.)Bydefault,thisdeviceoperatesinamodethatiscompliantwith theU.S.requirements. 2.)Thisdevicewillalsousesupplementalinformationsuchasgeo- locationdatatodeterminethatitisoperatingoutsidetheU.S.,if necessary,tochangeitspower.Suchsupplementaldatawillbe derivedfromthefollowing: GlobalNavigationSatelliteSystem(GNSS)7sensorsinthedevice MobileCountryCode(MCC),8orMCCwithaMobileNetworkcode (MNC),receivedfromaCMRS9carrierandreceiveddirectlybya receiveronthedevice Countryinformationderivedfrommultipleadjacentaccesspoints(for exampleusingIEEEStd802.11dprovisions)maybepermittedon case-by-casebasis Othersuitablegeo-locationdatabasedonIPaddressesorother reliablesource. SCS-F190WiFiChannel12&13DeclarationLetterPage 3 of2Rev.2.0 CreatedbyWilliamGraffApprovedbyBao-ThuongNguyen Sincerely, zhenhuaZhao QCManager DongguanXinsuTechnologyCo.,Ltd. Room106,ChuangtouBuilding,No.8IndustrialSouthRoad,SongshanLakeHigh-tech IndustrialDevelopmentZone,Donggua

Figure1.Overallviewofunit Figure2.Overallviewofunit Figure3.Remotecontrol1 Figure4.Remotecontrol2 Figure5.Remotecontrol3 Figure6.Overallviewofunit Figure7.Overallviewofunit Figure8.Labelviewofadapter

Label： LabelLocation

ANTENNA

RFEXPOSUREEVALUATION EUTSpecification EUTRoboticVacuumCleaner ModelNumberG20 FCCID2ATOQ-G20 Antennagain(Max)3dBi OperationFrequencyWLAN:2.412GHz~2.462GHz InputRatingAC120V/60Hz,0.4AMAX Max.outputpower802.11b:19.88dBm 802.11g:18dBm 802.11n(HT20):18.05dBm TestRequirement: AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 11.1Friistransmissionformula:Pd=(Pout*G)\(4*pi*R 2 ) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainmW G=Numericgainoftheantennarelativetoisotropicantenna Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainofthendtotal powerinputtotheantenna,throughthecalculation,wewillknowthedistance wheretheMPElimitisreached. 11.2MeasurementResult Antennagain:3dBi WIFI: Signature: AlanHe Date:2020-07-23

Report No.: EA2006086F06001 1 of 53 DongGuan Anci Electronic Technology Co., Ltd 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. Phone: 86-769- 8507 5888; Fax: 86-769- 8507 5898 E-mail: [email protected] Rev. 1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Robotic Vacuum Cleaner Model No.: G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, KK3, KK31 FCC ID: 2ATOQ-G20 Trademark: ABIR Report No.: EA2006086F06001 Issue Date: July 02, 2020 Prepared for Dongguan Xinsu Technology Co., Ltd. Room 106, Chuangtou Building, No.8 Industrial South Road, Songshan Lake High-tech Industrial Development Zone, Dongguan Prepared by Dong Guan Anci Electronic Technology Co., Ltd. 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan, Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. This report shall not be reproduced, except in full, without the written approval of Dong Guan Anci Eleaactronic Technology Co., Ltd. Report No.: EA2006086F06001 2 of 53 TRF No.: FCC 15.247/A Rev. 1.0 VERIFICATION OF COMPLIANCE Applicant: Dongguan Xinsu Technology Co., Ltd. Room 106, Chuangtou Building, No.8 Industrial South Road, Songshan Lake High-tech Industrial Development Zone, Dongguan Manufacturer: Dongguan Xinsu Technology Co., Ltd. Room 106, Chuangtou Building, No.8 Industrial South Road, Songshan Lake High-tech Industrial Development Zone, Dongguan Product Description: Robotic Vacuum Cleaner Model Number: G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, KK3, KK31(All models are identical except for different model names. We chose model :G20 for all tests) We hereby certify that: The above equipment was tested by Dong Guan Anci Electronic Technology Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. Date of Test : June 10, 2020 to June 29, 2020 Prepared by : Tomas Yang/Supervisor Reviewer & Authorized Signer : Alan He/Manager Report No.: EA2006086F06001 3 of 53 TRF No.: FCC 15.247/A Rev. 1.0 Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / EA2006086F06001 Report No.: EA2006086F06001 4 of 53 TRF No.: FCC 15.247/A Rev. 1.0 Table of Contents 1. GENERAL INFORMATION ..................................................................................................................................... 6 1.1 PRODUCT DESCRIPTION ........................................................................................................................................ 6 1.2 TEST METHODOLOGY ............................................................................................................................................ 6 2. SYSTEM TEST CONFIGURATION ........................................................................................................................ 7 2.1 EUT CONFIGURATION ............................................................................................................................................ 7 2.2 EUT EXERCISE ...................................................................................................................................................... 7 2.3 TEST PROCEDURE ................................................................................................................................................. 7 2.4 CONFIGURATION OF TESTED SYSTEM ................................................................................................................... 7 3. DESCRIPTION OF TEST MODES ......................................................................................................................... 9 4. SUMMARY OF TEST RESULTS ............................................................................................................................ 9 5. TEST FACILITY ....................................................................................................................................................... 13 6. CONDUCTED EMISSIONS TEST ........................................................................................................................ 14 6.1 MEASUREMENT PROCEDURE .............................................................................................................................. 14 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................................................... 14 6.3 MEASUREMENT EQUIPMENT USED ...................................................................................................................... 14 6.4 CONDUCTED EMISSION LIMIT .............................................................................................................................. 14 6.5 MEASUREMENT RESULT ...................................................................................................................................... 14 7. RADIATED EMISSION TEST ................................................................................................................................ 17 7.1 MEASUREMENT PROCEDURE .............................................................................................................................. 17 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................................................... 18 7.3 MEASUREMENT EQUIPMENT USED ...................................................................................................................... 19 7.4 RADIATED EMISSION LIMIT ..........................................................................................................…

Text truncated - open the document above for the full version.