2ATOQ-X8PRO-ARobotic Vacuum Cleaner

Safety Regulation Before using this product, please read the following safety instructions and follow all the safety precautions. Any operation inconsistent with this instruction manual may cause damage to this product. ATTENTION: Ѳ2QO\DXWKRUL]HGWHFKQLFLDQVFDQGLVDVVHPEOHWKLVSroduct. Users are not recommended to disassemble this product by themselves. Ѳ3OHDVHXVHWKHRULJLQDOSRZHUDGDSWHURQOy. Other adapters may cause damage to this product. Ѳ'RQRWWRXFKZLres, sockets or power adapters when your hands are wet. Ѳ'RQRWXVHFORWKFXrtains or body parts to roll into the product drive wheels. Ѳ'RQRWSODFHWKLVSroduct near cigarette butts, lighters and other smoldering fires. Ѳ3OHDVHFOHDQWKHSroduct after charging. Ѳ'RQRWEHQGZLres excessively or place heavy objects and sharp objects on the machine. Ѳ7KLVSroduct is an indoor household prRGXFW'RQRWXVHLWRXWGRRrs. Ѳ'RQRWVLWRQWKHSroduct. Ѳ'RQRWXVHWKLVSroduct in a wet environment (e.g. bathroom). Ѳ%HIRre using this product, please remove all vulnerable items (e.g. glasses, lamps, etc.) that may entangle the side brushes, side wheels and brush brush. Ѳ'RQRWSXWWKLVSroduct in a place where it is easy to fall (e.g. on desks and chairs). Ѳ3OHDVHWXrn off the main power switch on the side of machine during transportation or not use for long time. Ѳ3OHDVHFDrefully check whether the power adapter is connected to the socket before use. ѲTo prevent tripping, please inform other members of the house when this product works. Ѳ3OHDVHHPSW\WKHGXVWEox before using this product when the dust box is full. Ѳ7KHWHPSHUDWXre used for this product is 0 to 40 degrees celsius. Ѳ'RQRWXVHWKLVSroduct in high temperature environment Ѳ3OHDVHremove the battery from the machine before the product is scrapped. Ѳ3OHDVHPDNHVXre that this product is not powered on when removing the battery. Ѳ3OHDVHrecycle the discarded batteries safely. on the ground as well as items (e.g. wires, paper sheets, curtains) War ning: to “product parameters” for battery specification information. and operating parts of the product. waste paper that may clog products. toner and toner for printers or photocopiers. It is also prohibited to use the product in clean areas with flammable items.the product in clean areas with flammable items. ashes and other articles that may cause a fire. the suction port is blocked. Clean up dust, cotton wool, hair etc. at the suction port to ensure smooth air circulation at the suction port. Use the power cord carefully to avoid damage. charging station. It is forbidden to use the power cord as a handle. It is forbidden to clamp the power cord in the crack of the door. Even if the product has been severely damaged, burning of the product is prohibited, which may lead to explosion of the battery of the product. 13、This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 2 This appliance contains batteries that are only replaceable by skilled persons. Pr oduct Composition / Package Contents Host Charging BaseAdaptor 5HPRWHϦRSWLRQDOϧ'XVW%LQ6LGH&RYHU'XVW%LQ Cleaning Brush HE3A Filter 6LGH%UXVK MopϦRSWLRQDOϧ 1 Product Composition/ Part Name 723 Bottom *URXQG6HQVRU Left side Brush Left Wheel 'XVW%LQ Right side Brush Right Wheel Charge plate Universal Wheel Battery Rolling Brush Assembly 'XVWELQ%XWWRQ 0DLQ6ZLWFK Charge Hole Go Home 6WDUW3DXVH WIFI Indicator Light %XPSHU6HQVRU 6HQVRUVDORQJZDOOV Laser head pressure sensor Laser ranging sensor 4 2 5 CharJLQJ6WDWLRQ 'XVW%LQ Remote +(3$)LOWHU&RYHU Conductive 6KUSQHO 'XVWELQ6LGH Cover 6LJQDO,QGLFDWRU '&6RFNHW &KDUJLQJ3ROH3LHFH +(3$)LOWHU 'XVWELQ0HDO 6KHHW 3ULPDU\)LOWHU Water Tank Mop Water ,QMHFWLRQ3RUW Home Forward6WDUW3DXVH Turn RightTurn Left Back Border Cleaning (The model determines whether the key is valid.) 6SRW&OHDQLQJ 6XFWLRQ3RZHU$GMXVWPHQW 212)) Automatic Cleaning 3 Product Usage / Preparation $VVHPEOH'XVW%LQ Ѳ$VVHPEOHWKHGXVWELQVLGHFRYHU3UHVVWKHVLGHFRYHUILUPO\ into specified position shown in above picture. Ѳ&ORVHWKHGXVWELQVLGHFRYHUURWDWHWKHGXVWER[VLGHFRYHUDVVKRZQE\WKHDUURZ 6 4 Ѳ,QVWDOOWKHGXVWELQ 5HPRYHWKH%XPSHU3URWHFWLYH6WULS Before using the robot, please remove the protective strip from the robot. 5 Product Use / Host Charging Ѳ3ODFLQJDQGFKDUJLQJ7KHFKDUJLQJVWDWLRQLVDJDLQVWWKHZDOODQGSODFHG RQDIODWJURXQG'RQRWSODFHDUWLFOHVZLWKLQWKHUDQJHRIPOHIWDQG right and 1.5m ahead. Ѳ&RQQHFWWKHSRZHUVXSSO\ Ѳ,QVWDOOLQJVLGHEUXVK,QVWDOOWKHVLGHEUXVKDFFRUGLQJWRWKHOHIWDQGULJKW /5  8 6 Ѳ7XUQRQ0DLQ6ZLWFK “ I ”means turn on machine “ O ”means turn off machine Ѳ&KDUJH Two ways to charge the robot: 3XWWKHURERWRQFKDUJHEDVHWRFKDUJH 2.Use power adaptor to charge Ϧ:KHQFKDUJLQJLQGLFDWRUOLJKWIODVKHVLQGLFDWLRQOLJKWZLOOWXUQWRJUHHQFRORU RQFHFKDUJLQJFRPSOHWHGϧ 'XULQJWKHFOHDQLQJSURFHVVWKHKRVWFDQVHQVHWKDWLWVSRZHULVLQVXIILFLHQWDQG automatically start the recharging mode to find the charging station to recharge. You can also command the host to start the recharging mode by the recharging button on the remote controllerRUE\$33. &KDUJLQJDWWHQWLRQϸ Ѳ7KHFKDUJLQJVWDWLRQFDQQRWEHXVHGLQHQYLURQPHQWVZLWKVWURQJUHIOHFWLRQ such as direct sunlight or nearby mirrors. If there is any object with strong reflection, please cover it 7cm from the bottom. Ѳ,QRUGHUWRHQVXUHWKHQRUPDOZRUNLQJKRXUVRIWKHKRVWSOHDVHIXOO\FKDUJHLW before use. The charging time is about 6 hours. Ѳ:KHQFKDUJLQJGRQRWDVVHPEOHWKHZDWHUWDQNDVVHPEO\WRWKHURERWYDFXXP so as to ensur…

Text truncated - open the document above for the full version.

DongguanXinsuTechnologyCo.,Ltd. Page1of1 Declarationonmodeldifference We,DongguanXinsuTechnologyCo.,Ltd. theundersignedherebyconfirmthatthesemodelsareidentical, andallmodelshavethesameRFmoduleandAntenna,exceptfor decorativepartsinfrontpanels,colorofenclosure,arethetrademark andmodelno.fortradingpurpose.  ProductionnameTradenameINPUTModelno. RoboticVacuum Cleaner N/A 100-240VAC,0.5A,50W X8Pro,X8Plus,X8,X81,X82,X83, X84,X85,X86,X87,X88,X89,X81- A,X82-A,X83-A,X84-A,X85-A, X86-A Confirmedby: Name:ZhenhuaZhao Title:QCmanager Date:2021-11-12 Signatureofapplicant:

DongguanXinsuTechnologyCo.,Ltd.C5266091_X8_Ed.1 1/1 LetterofAuthorization Company:DongguanXinsuTechnologyCo.,Ltd. Address:Room106,ChuangtouBuilding,No.8thIndustrialSouthRoad,SongshanLake High-techIndustrialDevelopmentZone,Dongguan ProductName:RoboticVacuumCleaner ModelNumber:X8Pro,X8Plus,X8,X81,X82,X83,X84,X85,X86,X87,X88, X89,X81-A,X82-A,X83-A,X84-A,X85-A,X86-A FCCIdentifier:2ATOQ-X8PRO-A WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:ZhenhuaZhaoDate:2021-11-12 Title:QCManager Signatureofapplicant:

C5266091_X10_Ed.1 1/1 DongguanXinsuTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2021-11-12 Subject:RequestforConfidentiality FCCID:2ATOQ-X8PRO-A ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo BlockDiagram Schematics TestReportNoNo TestSetupPhotosNo User’sManual InternalPhotos PartsList/TuneUp RFExposureInfo OperationalDescription CoverLetter(s)NoNo SDRSoftware/SecurityInfoNo Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Signature: Name:ZhenhuaZhao Title:QCManager

FCCID：2ATOQ-X8PRO-A

FCCID：2ATOQ-X8PRO-A RoboticVacuumCleaner Model:X8Pro FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X8Pro FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X8Plus FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X8 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X81 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X82 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X83 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X84 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X85 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X86 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X87 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X88 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X89 FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X81-A FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X82-A FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X83-A FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X84-A FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X85-A FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch RoboticVacuumCleaner Model:X86-A FCCID:2ATOQ-X8PRO-A DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch

FCCID：2ATOQ-X8PRO-A ANTENNA

FCCTESTREPORT FCCID:2ATOQ-X8PRO-A Product: RoboticVacuumCleaner ModelName: X8Pro,X8Plus,X8,X81,X82,X83,X84,X85,X86,X87,X88,X89,X81- A,X82-A,X83-A,X84-A,X85-A,X86-A Brand : N/A ReportNo.: PTC21062401820E-FC02 Preparedfor DongguanXinsuTechnologyCo.,Ltd Room106,ChuangtouBuilding,No.8thIndustrialSouthRoad,SongshanLakeHigh-techIndustrial DevelopmentZone,Dongguan Preparedby PreciseTesting&CertificationCo.,Ltd Building1,No.6,TongxinRoad,DongchengStreet,Dongguan,Guangdong,China ReportNo.:PTC21062401820E-FC02 Page2of7 TESTRESULTCERTIFICATION Applicant’sname: DongguanXinsuTechnologyCo.,Ltd Address: Room106,ChuangtouBuilding,No.8thIndustrialSouthRoad, SongshanLakeHigh-techIndustrialDevelopmentZone,Dongguan Manufacture'sname: DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch Address: Room103,building5,No.136YongjunRoad,DalingshanTown,Dongguan City,GuangdongProvince Productname: RoboticVacuumCleaner Modelname: X8Pro,X8Plus,X8,X81,X82,X83,X84,X85,X86,X87,X88,X89,X81- A,X82-A,X83-A,X84-A,X85-A,X86-A Testprocedure:KDB447498D01GeneralRFExposureGuidancev06 TestDate: Nov.02,2021toNov.16,2021 DateofIssue: Nov.17,2021 TestResult:Pass ThisdevicedescribedabovehasbeentestedbyPTC,andthetestresultsshowthatthe equipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditisapplicable onlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofPTC,this documentmaybealteredorrevisedbyPTC,personalonly,andshallbenotedinthe revisionofthedocument. TestEngineer: LeoYang/Engineer TechnicalManager: ChrisDu/Manager ReportNo.:PTC21062401820E-FC02 Page3of7 Contents Page 2TESTSUMMARY.................................................................................................................................................. 3GENERALINFORMATION................................................................................................................................. 3.1GENERALDESCRIPTIONOFE.U.T..........................................................................................................5 4RFEXPOSURE..................................................................................................................................................... 4.1REQUIREMENTS........................................................................................................................................6 4.2THEPROCEDURES/LIMIT.........................................................................................................................6 4.3MPECALCULATIONMETHOD..................................................................................................................7 4.4TESTRESULT............................................................................................................................................7 ReportNo.:PTC21062401820E-FC02 Page4of7 2TestSummary TestItemsTestRequirementResult MaximumPermissibleExposure (ExposureofHumanstoRFFields) 1.1307(b)(1)PASS Remark: N/A:NotApplicable ReportNo.:PTC21062401820E-FC02 Page5of7 3GeneralInformation 3.1GeneralDescriptionofE.U.T. ProductName : RoboticVacuumCleaner ModelName : X8Pro Additionalmodel X8Plus,X8,X81,X82,X83,X84,X85,X86,X87,X88,X89,X81-A,X82-A,X83- A,X84-A,X85-A,X86-A Note：AllmodelshavethesameRFmoduleandAntenna,exceptfordecorative partsinfrontpanels,colorofenclosure,arethetrademarkandmodelno.for tradingpurpose..ThemaintestmodelisX8Pro. Specification : 802.11b OperationFrequency : 2412-2462MHz NumberofChannel : 11channels TypeofModulation : DSSSwithDBPSK/DQPSK/CCK Antennainstallation : FPCBantenna AntennaGain : 2.5dBi Powersupply : Li-186503200mAh14.8V4S1P/47.36Wh(J&YTECHNOLOGYCO.,LTD) 19VDC600mAviaAdaptorinput:100-240~50/60HZ0.4AMAX (model:GQ12-190060-AG) HardwareVersion : V1.0 SoftwareVersion : V1.0 ReportNo.:PTC21062401820E-FC02 Page6of7 4RFExposure TestRequirement :FCCPart1.1307(b)(1) EvaluationMethod :FCCPart2.1091 4.1Requirements Systemsoperatingundertheprovisionsofthissectionshallbeoperatedinamannerthatensuresthat thepublicisnotexposedtoradiofrequencyenergylevelsinexcesslimitformaximumpermissible exposure.Inaccordancewith47CFRFCCPart2SubpartJ,section2.1091thisdevicehasbeen definedasamobiledevicewherebyadistanceof0.2mnormallycanbemaintainedbetweentheuser andthedevice. 4.2Theprocedures/limit (A)LimitsforOccupational/ControlledExposure FrequencyRangeElectricFieldMagneticFieldPowerDensity(S)AveragingTime 0.3-3.06141.63(100)*6 3.0-301842/f4.89/f(900/f)*6 30-30061.40.1631.06 300-1500F/3006 1500-100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure FrequencyRangeElectricFieldMagneticFieldPowerDensity(S)AveragingTime 0.3-1.346141.63(100)*30 1.34-30824/f2.19/f(180/f)*30 30-30027.50.0730.230 300-1500F/150030 1500-100,0001.030 Note:f=frequencyinMHz;*Plane-waveequivalentpowerdensity ReportNo.:PTC21062401820E-FC02 Page7of7 4.3MPECalculationMethod E(V/m) ＝ d GP30 PowerDensity:Pd(W/m²) ＝ 377 2 E E＝Electricfield(V/m) P ＝ PeakRFoutputpower(W) G ＝ EUTAntennanumericgain(numeric) d＝Separationdistancebetweenradiatorandhumanbody(m) Theformulacanbechangedto Pd ＝ 2 377 30 d GP   FromthepeakEUTRFoutputpower,theminimummobileseparationdistance,d=0.2m,aswellas thegainoftheusedantenna,theRFpowerdensitycanbeobtained 4.4TestResult Item Antenna Gain (numeric) Max.Peak OutputPower (dBm) PeakOutput Power(mw) PowerDensity (mW/cm2) Limitof Power Density (mW/cm2) Result 24121.77815.434.670.0122631Pass ******THEENDREPORT******

Page 1 of 41 FCCTESTREPORT FCCID:2ATOQ-X8PRO-A Product:RoboticVacuumCleaner ModelName: X8Pro,X8Plus,X8,X81,X82,X83,X84,X85,X86,X87,X88,X89,X81-A,X82- A,X83-A,X84-A,X85-A,X86-A Brand: N/A ReportNo.: PTC21062401820E-FC01 Preparedfor DongguanXinsuTechnologyCo.,Ltd Room106,ChuangtouBuilding,No.8thIndustrialSouthRoad,SongshanLakeHigh-techIndustrial DevelopmentZone,Dongguan Preparedby PreciseTesting&CertificationCo.,Ltd Building1,No.6,TongxinRoad,DongchengStreet,Dongguan,Guangdong,China ReportNo.:PTC21062401820E-FC01 Page 2 of 41 1TESTRESULTCERTIFICATION Applicant’sname: DongguanXinsuTechnologyCo.,Ltd Address: Room106,ChuangtouBuilding,No.8thIndustrialSouthRoad,SongshanLake High-techIndustrialDevelopmentZone,Dongguan Manufacture'sname: DongguanXinsuTechnologyCo.,Ltd.DalingshanBranch Address:Room103,building5,No.136YongjunRoad,DalingshanTown,Dongguan City,GuangdongProvince Productname: RoboticVacuumCleaner Modelname SerialModel : X8Pro,X8Plus,X8,X81,X82,X83,X84,X85,X86,X87,X88,X89,X81-A,X82- A,X83-A,X84-A,X85-A,X86-A Standards: FCCCFR47Part15Section15.247 Testprocedure: ANSIC63.10:2013 TestDate: Nov.02,2021toNov.16,2021 DateofIssue: Nov.17,2021 TestResult:Pass ThisdevicedescribedabovehasbeentestedbyPTC,andthetestresultsshowthattheequipment undertest(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetested sampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofPTC,this documentmaybealteredorrevisedbyPTC,personalonly,andshallbenotedintherevisionof thedocument. TestEngineer: LeoYang/Engineer TechnicalManager: ChrisDu/Manager ReportNo.:PTC21062401820E-FC01 Page 3 of 41 Contents Page 1TESTRESULTCERTIFICATION................................................................................................................................2 2TESTSUMMARY...........................................................................................................................................................5 3GENERALINFORMATION..........................................................................................................................................6 3.1GENERALDESCRIPTIONOFE.U.T.....................................................................................................................6 3.2CHANNELLIST......................................................................................................................................................7 3.3TESTSITE...........................................................................................................................................................10 4EQUIPMENTDURINGTEST.....................................................................................................................................11 4.1EQUIPMENTSLIST..............................................................................................................................................11 4.2MEASUREMENTUNCERTAINTY..........................................................................................................................13 4.3DESCRIPTIONOFSUPPORTUNITS....................................................................................................................14 5CONDUCTEDEMISSION...........................................................................................................................................15 5.1E.U.T.OPERATION............................................................................................................................................15 5.2EUTSETUP........................................................................................................................................................15 5.3TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION)..................................................................................16 5.4MEASUREMENTPROCEDURE............................................................................................................................16 5.5CONDUCTEDEMISSIONLIMIT............................................................................................................................16 5.6MEASUREMENTDESCRIPTION...........................................................................................................................16 5.7CONDUCTEDEMISSIONTESTRESULT..............................................................................................................16 6RADIATEDSPURIOUSEMISSIONS.......................................................................................................................19 6.1EUTOPERATION...............................................................................................................................................19 6.2TESTSETUP.......................................................................................................................................................20 6.3SPECTRUMANALYZERSETUP...........................................................................................................................21 6.4TESTPROCEDURE.............................................................................................................................................22 6.5SUMMARYOFTESTRESULTS...........................................................................................................................23 7CONDUCTEDSPURIOUSEMISSION.....................................................................................................................28 7.1TESTPROCEDURE.............................................................................................................................................28 7.2TESTRESULT.....................................................................................................................................................28 8BANDEDGEMEASUREMENT..............................................................................................................................…

Text truncated - open the document above for the full version.

FCCID:2ATOQ-X8PRO-A ConductedEmissions RadiatedSpuriousEmissions TestFrequencyFrom30MHz-1000MHz TestFrequencyAbove1GHz