2ATPZJJ15000KettlebellConnect

KettlebellConnect TM 2.0 User Manual Model No:JJ15000 一、Product Introduction Thanks for selecting Kettlebell, an innovative training tool designed to help you achieve your fitness goals. Its elegant design and advanced technology result in a single kettlebell that adjusts from 12lbs (5.5kg) to 42lbs(19kg). By connecting the Kettlebell to the App, you can set your goals, track your workouts, and fully grasp your fitness level with APP. ※This product needs to be charged and activated before first use. It is recommended to fully charge the battery before use. Read and understand the contents of this manual before attempting to use the Kettlebell. 二、Product Accessories Kettlebell Shell Base Weights Charging Cable &USB TYPE-C Carefully remove all items from the box and place them on the floor prior to assembly. Verify that all of the components have been included. Should you find any parts missing, return the product to your point of purchase or contact JAXJOX at: [email protected] or (425)324-3017 三、Assembly Place the base on a solid, level floor. We recommend using and storing your kettlebell on the floor to minimize risk of injury. 1. Charge the Kettlebell Connect Plug the charging cable into the AC Adapter. Plug the other end of the charging cable into the base of Kettlebell Connect. Plug the AC Adapter into a power outlet. （1）When the base battery is low, the display screen showing as follows, please charge it in time. （2）When the shell battery is low, the display showing as follows, please charge it in time. 3. Stack the weights one at a time. （1）Facing the base’s screen, place the wights on the base in reverse order, starting with 1(on the top) and ending with 5(on the bottom). (2) Ensure the notches are directly to the side, towards the wings of the base. The number on the weight should appear right side up. （3）Place the weights completely, ensuring there are no spaces in between each of the weights. 4. Place the kettlebell shell onto the base. （1）Put the kettlebell shell over the top of the weights, ensuring the kettlebell’s handles are aligned with the wings of the base. （2）When properly seated and ready for use, the Kettlebell Connect will beep once. Important: All five weights weights must be stacked in the correct order for the Kettlebell connect to function properly. Incorrect assembly of the weights and kettlebell shell may result in damage to the Kettlebell Connect or result in serious injury. 四、LCD Display 1. Bluetooth Icon 2. Base battery Icon 3. Shell sensor battery Icon 4. Weights(default weight set 12LB) 5. Weight Unit(LB/KG) 五、Download and install APP Search “JAXJOX” from APP Store, and install. 六、Bluetooth Connection • Open Bluetooth in your phone • Open “JAXJOX” App Click “ Connect”, Select Device, the Bluetooth icon will not flash if connect successfully. • Check the data after connecting with the APP. Connected Disconnected Note： Verify the Kettlebell has been added in JAXJOX app. Verify Bluetooth is enabled on your mobile device Use the Kettlebell 7-1. Activate the Kettlebell (1) Press either the "–" or “+ ”on the base to activate the Kettlebell. (2)The screen will display to remind you to connect the Kettlebell with your mobile device and the JAXJOX app. 7-2. The unit settings Press and hold either the [+] or [-] button for two seconds, then enter into the weight unit setting interface, the unit icon [LB] or [KG] in the upper right corner flashes, press the [+] or [-] button to switch the unit, and it will automatically determine if there is no operation for a short time. 7-3. Weights Setting • Press 【+】or【-】to choose the desired weight for your workout.. The device can be adjust from 12lb(5.5kg)—18lb(8.2kg)—24lb(10.9kg—30lb(13.6kg）—36lb(13.6kg）—42lb（19kg）— 12lb（5.5kg) • The Kettlebell connect takes approximately 3 seconds to change to your selected weight. The weight loading animation plasy while the weight is adjusting. Do not move the Kettlebell connect while it is adjusting. • The kettle will beep once when ready for use. . 7-4. The weight of the kettlebell handle does not match the weight displayed on the base. If the weight of the kettlebell shell does not match the weight displayed on the base, pls do the following step: • Put away the shell from the base • Press and hold【+】&【-】button for five seconds at the same time, the screen will display the number of the weights. • According to the number of weights remaining on the base, press the [+] and [-] button to adjust so that the number of weights displayed on the LCD is consistent with the number of remaining weights on the base, the number of weights flashes, about three seconds, the kettle bell will beep once finish, then put the handle back on the base. Note: Pls do not adjust the kettlebell shell weight by hand. The weight of the kettlebell shell and the base do not match, which may cause the device to not work properly. Pls reset it as above, otherwise it may cause serious injury or equipment damage. 7-5. Precautions before kettlebell training Before starting your workout, ensure your environment is free of anything that may interfere with your movements. Do not drop the kettlebell or use excessive force when moving the kettlebell. IMPORTANT: Do not attempt to adjust any of the mechanisms on the underside of the kettlebell shell. Do not attempt to manually adjust the weight ot the kettlebell shell. Doing so may result in serious injury and /or device malfunction. 7-6. Disconnect and connect shell and base Shell/Base connect and disconnet display: （1）Shell and base connected, icon display； （2）Shell and base disconnected, icon not display； （3）When charging, icon display；without charging,icon not display； （4） Shell and Base disconnected reminder: If the shell and base disconnected more than 24 hours, then the display will reminder the user to put back the shell. Every 2 seconds and 1 second are displayed alternately. The buttons have no function. Putting the handle back to the base will return to…

Text truncated - open the document above for the full version.

JAXJOX INC Date. 2020-8-18 TO FederalCommunicationCommission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC lD: 2ATPZIJ 15000 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co. Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC lD above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, lnc , still resides with JAXJOX INC This authorization is valid until further written notice from the applicant. Print Name: Owusu Stephen Signature: A/il/lrl 9-rrft ^ On behalf of Company: JAXJOX INC Telephone: 1 (425)32$A17 E-mail: stephen.owusu@jaxjox. com

JAXJOX INC To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: JAXJOX INC

SGS i.Jorth America lnc 620 Otd Peachiree Road (r lrTE .nn .fUIiL IUU Suwanee, Georgaa 30024 Unile{"l $iates Applicant Declaration Applicant Legal Business Name Address Lincoln Square South Building 10400 NE 4th ST BELLEVTIE Washington 98004 United States Grantee Code Authorized Contact Name Owusu Stephen Contact Enrail ste ph en. orvu s u (g!j ax.i o r. com Conlact Phone 1 (425)32430 r 7 l. lhe undersigned, certify that I am an authorized signatory forthe Applicant and therefore declare: a) in accordance with 47CFR2-91 1(d), all of the staiernents herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exacl FCC lD as specilied in this application (2) compliance statement labeling pursuant to the applicabie rules, (3) compliance of the equipment with the applicable technical rules. if the Applicant is not the actual manu{acturer of the equipmeni, appropriate arrangements have been made with the manufacturer to ensure that production units of this eguipment will continue to comply with the FCC's technical requirements. in accordance with 47 CFR 2,909 and KD8394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321 in accordance with 1SO17065, FCC KD8641163, FCC KD8610077, KD839432'1 and RSP-100. the Applicant has read, understood. accepts and agrees to abide by the post market surveillance requirements. ( 1 ) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant siiail make provisions to always have a production sample available upon request by SGS, FCC andlor ISED. (3) the Applicant sha/i, upon request by SGS. at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surve;llance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits. pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. $862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1,2002(b) for the definition of a "party" for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, lnc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.qov/wireless/bureau-divisions/technoloqies-svstems-and-innovaiion-division/rules-requlatio_ns-tttle-47 Link to KDBs; https://aops.fcc.oov/oetcf/kdb/index.cfm Link to RSP-100: httpsJ/u/ww.ic.oc.caleic/site/sm!qsi.nsf,Ienq/sf01 1 30.html Applicant Declaration Rer,:0.0 Applicant Signature: Print Name. 0rvuslr Steplren / CEO WOiSi This declaratlan cannot be sig*ed by an AEent, it sftall be slgned bv an sig*ed by AEent, srgned by person

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZEM2008007780CR FCC ID:2ATPZJJ15000 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

KB200 SHELL LABEL KB200 LI LA MEI20200928 Augus Xiao20200928 LI LA MEI Augus Xiao20200928First Release ISSUE FOR 0.0 P/N. 0.6.XXXXXX.xxxx-xx REV.DATE MADE BYAPP BY TITLE MATERIAL FINISH MODEL NO. PART NO. VERSION 0.0 1 1 PAGE OF SCALE CAD REF.DRAWING DATE CHECKED DATE APPROVED DATE Unless otherwise specified: 3rd angle projection All dimensions are in mm Linear dimensions tolerance: ANGULAR PORTIONS TOLERANCE: 0.25 DO NOT SCALE DRAWING 0~10 0.10 10~50 0.15 50~100 0.2 >100 0.25 / / / / This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 26482-JJ15000 FCC ID: 2ATPZJJ15000 SKU:JJ15000 MATERIAL: T=0.08MM WHITE PET FINISH: MATT. PP COATING NOTE: 1. INK MUST BE 100% OPAQUE TO INSURE CORRECT COLOR 2. GRAPHICS TOLERANCE: +/-0.5MM UNLESS OTHERWISE SPECIFIED BlackYellowMagentaCyan 蓝红黄黑 MODEL: KB200, CUSTOMER: JAXJOX PRODUCT NAME: KETTLEBELL SHELL LABEL SIZE: L105W27MM COLOR: PRINTING IN BLACK This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 26482-JJ15000 FCC ID: 2ATPZJJ15000 SKU:JJ15000

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 10 Internal Photos for SZEM2008007780CR FCC ID:2ATPZJJ15000 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 10 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 9 of 10 Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 10 of 10

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778003 Page: 1 of 7 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM2008007780CR Applicant: JAXJOX INC Address of Applicant: Lincoln Square South Building 10400 NE 4th ST, BELLEVUE, Washington, United States. Manufacturer: JAXJOX INC Address of Manufacturer: Lincoln Square South Building 10400 NE 4th ST, BELLEVUE, Washington, United States. Factory: JAXJOX INC Address of Factory: Lincoln Square South Building 10400 NE 4th ST, BELLEVUE, Washington, United States. Equipment Under Test (EUT): EUT Name: KettlebellConnect™ 2.0 Model No.: JJ15000 Trade Mark: JAXJOX® FCC ID: 2ATPZJJ15000 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-08-11 Date of Test: 2020-08-12 to 2020-08-28 Date of Issue: 2020-09-01 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778003 Page: 2 of 7 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-09-01 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778003 Page: 3 of 7 3 Contents Page 1 COVER PAGE .............................................................................................................................................. 1 2 VERSION ...................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................. 3 4 GENERAL INFORMATION .......................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION ...................................................................................................................................... 5 4.3 TEST FACILITY ........................................................................................................................................ 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 6 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 6 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 6 5 SAR EVALUATION ...................................................................................................................................... 7 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 7 5.1.1 Standard Requirement ..................................................................................................................... 7 5.1.2 Limits ................................................................................................................................................ 7 5.1.3 EUT RF Exposure ............................................................................................................................ 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778003 Page: 4 of 7 4 General Information 4.1 General Description of EUT Battery: Kettlebell Shell:Rechargeable battery DC 3.7V(Charging by Type-C) Charing Base:Rechargeable battery DC 3.7V(Charging by Type-C) Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Data rate: 1Mbit/s Antenna Type: PCB antenna Antenna Gain: -3dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778003 Page: 5 of 7 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778003 Page: 6 of 7 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Techn…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778002 Page: 1 of 49 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2008007780CR Applicant: JAXJOX INC Address of Applicant: Lincoln Square South Building 10400 NE 4th ST, BELLEVUE, Washington, United States. Manufacturer: JAXJOX INC Address of Manufacturer: Lincoln Square South Building 10400 NE 4th ST, BELLEVUE, Washington, United States. Factory: JAXJOX INC Address of Factory: Lincoln Square South Building 10400 NE 4th ST, BELLEVUE, Washington, United States. Equipment Under Test (EUT): EUT Name: KettlebellConnect™ 2.0 Model No.: JJ15000 Trade Mark: JAXJOX® FCC ID: 2ATPZJJ15000 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-08-11 Date of Test: 2020-08-12 to 2020-08-28 Date of Issue: 2020-09-01 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778002 Page: 2 of 49 Revision Record Version Chapter Date Modifier Remark 01 2020-09-01 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778002 Page: 3 of 49 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200800778002 Page: 4 of 49 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 7 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 7 4.4 TEST LOCATION .................................................................................................................................... 8 4.5 TEST FACILITY ...................................................................................................................................... 8 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 8 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 8 5 EQUIPMENT LIST ...................................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 11 6.1 ANTENNA REQUIREMENT .................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 12 7.1 CONDUCTED PEAK OUTPUT POWER .................................................................................................... 12 7.1.1 E.U.T. Operation .......................................................................................................................... 12 7.1.2 Test Mode Description ................................................................................................................. 12 7.1.3 Test Setup Diagram ..................................................................................................................... 13 7.1.4 Measurement Procedure and Data............................................................................................. 13 7.2 MINIMUM 6DB BANDWIDTH .................................................................................................................. 14 7.2.1 E.U.T. Operation .........................................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 2 Setup Photos for SZEM2008007780CR FCC ID:2ATPZJJ15000 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 2 1 Photographs Radiated Spurious Emissions Below 1GHz Above 1GHz