2ATPZJJ15001Dubbell Connect

DumbbellConnect TM User Manual Model：JJ15001 一、Product Introduction Thank you for choosing our Bluetooth Smart Dumbbell which is an innovative training tool for sports series manufactured by our company. With exquisite design and advanced technology, the weight of Smart Dumbbell can be adjusted from 8 pounds (3.6 kg) to 50 pounds (22.7 kg). You can set goals, track training, and fully master your fitness quality level at the JAXJOX® Fitness IQTM because the Smart Dumbell can connect to JAXJOX® APP via Bluetooth Low Energy. ※This product needs to be charged and activated before first use. It is recommended to fully charge the battery before use. This product manual will make you better understand our Smart Dumbbell. Please keep it for future reference. • Our products are not intended to provide medical advice, is only to show you the exercise date. 二、Product Accessories Handle Base weightsX14 Charging Cable &USB TYPE-C Carefully remove all items from the box and place them on the floor prior to assembly. Verify that all of the components have been included. Should you find any parts missing, return the product to your point of purchase or contact JAXJOX at: [email protected] or (425)324-3017 三、The installation step of Dumbbell. 1. Place the base on a firm level surface We recommend that you use and store your dumbbells horizontally to minimize the risk of injury. 2. Charging Dumbbell Plug the USB cable into the charger Insert the other end of the USB cable into the Dumbbell base Plug the charger into the power socket （1） When the base battery is low, the display screen showing as follows, please charge it in time. ： （2）When the shell battery is low, the display showing as follows, please charge it in time. ： 3. Weight stacked Make sure the weight slot faces directly to the side and to the wing plate of the base. Place weights in turn, making sure there is no space between each weight. 4. Place the dumbbell handle on the base (1) Place the handle on top of the weight, make sure the dumbbell handle is aligned with the base wing . (2）The dumbbells will beep when in right place and ready to use . • Note: weights must be stacked symmetrically so that dumbbell can be connected and work properly. Improper assembly of weights and dumbbell handles can damage dumbbell connections or cause serious injury . 四、LCD 1. Bluetooth icon （If the Smart Dumbbell connect the Bluetooth, the icon always on/otherwise not ） 2. Base battery Icon 3. Handle battery Icon 4. Value of weight (The default weight is 8 LB if it is not set) 5. Unit of weight (LB / KG ) 五、Download and install APP Search “JAXJOX” from APP Store, and install. 六、Bluetooth Connection • Open Bluetooth in your phone • Open “JAXJOX” App • Click “ Connect”, Select Device, the Bluetooth icon will not flash if connect successfully. • Check the data after connecting with the APP. Connected Disconnected Note： Verify the Kettlebell has been added in JAXJOX app. Verify Bluetooth is enabled on your mobile device • How to use Dumbbell 7-1. Start the dumbbell (1)Press the button of - or + on the base to activate the dumbbell. (2)The screen displays icon，reminding you that you need to connect to the JAXJOX application. 7-2. The unit settings Press and hold either the [+] or [-] button for two seconds, then enter into the weight unit setting interface, the unit icon [LB] or [KG] in the upper right corner flashes, press the [+] or [-] button to switch the unit, and it will automatically determine if there is no operation for a short time. 7-3. Setting up the weight • Press 【+】or【-】to choose the desired weight for your workout.. The device can be adjust from 8lb（3.6kg）— 14lb（6.4kg）— 20lb （9.1kg）— 26lb（11.8kg ）— 32lb （14.5kg）— 38lb（17.2kg）— 44lb（20kg）50lb（22.7kg) • The Dumbbell connect takes approximately 3 seconds to change to your selected weight. The weight loading animation plasy while the weight is adjusting. Do not move the Dumbbell connect while it is adjusting. • The Dumbbell will beep once when ready for use. Note: If the weight of the handle does not match the weight displayed on the base, please put back the handle and reset the weight according to the above steps. 7-4. Precautions before Dumbbell training Before starting your workout, ensure your environment is free of anything that may interfere with your movements. Do not drop the Dumbbell or use excessive force when moving the Dumbbell. IMPORTANT: Do not attempt to adjust any of the mechanisms on the underside of the Dumbbell. Do not attempt to manually adjust the weight on the Dumbbell shell. Doing so may result in serious injury and /or device malfunction. 7-5. Handle and Base (Disconnect and Connect) 显 Display for the handle/base connected and disconnected: （1）Handle and base connected, icon display； （2）Handle and base disconnected, icon not display； （3）During chargingicon display；without charging,icon not display； If the handle and base connected, it will see the battery icon in the screen. If the handle and base disconnected, it will not see the battery icon in the screen. （4）Handle and Base disconnected reminder: If the handle and base disconnected more than 24 hours, then the display will reminder the user to put back the handle. Every 2 seconds and 1 second are displayed alternately. The buttons have no function. Putting the handle back to the base will return to the main page. 7-6. Reset the dumbbell Resetting the device may correct equipment problems if your dumbbell with something wrong. To reset the dumbbells, press the reset button below the base, which is highlighted in the figure. 7-7. Enter into Sleep Mode Without any operation, it enters into sleep mode after 20 seconds, and the backlight turns off. 八、Disclaimer • The products are subject to change due to the manufacturer's ongoing research and development plans without prior notice. Our Company makes no representations or warranties as to this user manual or the product we described. • Our Company shall not be liable fo…

Text truncated - open the document above for the full version.

JAXJOX INC Date: 2020-9-10 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ATPZJJ15001 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with JAXJOX INC This authorization is valid until further written notice from the applicant. Print Name: Owusu Stephen Title: CEO Signature: On behalf of Company: JAXJOX INC Telephone: 1(425)3243017 E-mail: [email protected]

JAXJOX INC Date: 2020-09-10 To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: JAXJOX INC Regarding: Confidentiality Request regarding application for FCC ID: 2ATPZJJ15001 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date whichever is less. If the device is marketed within confidential period, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Print Name: Owusu Stephen Title: CEO Signature: On behalf of Company: JAXJOX INC Telephone: 1(425)3243017 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name JAXJOX INC Address Lincoln Square South Building 10400 NE 4th ST BELLEVUE Washington 98004 United States Grantee Code 2ATPZ FCC ID 2ATPZJJ15001 Authorized Contact Name Owusu Stephen Contact Email [email protected] Contact Phone 1(425)3243017 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1)the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2)the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3)the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2020-09-10 Print Name: Owusu Stephen Title: CEO *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 7 Internal Photos for SZEM2009008856CR FCC ID: 2ATPZJJ15001 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 7 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 7

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885603 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM2009008856CR Applicant: JAXJOX INC Address of Applicant: Lincoln Square South Building 10400 NE 4th ST BELLEVUE Washington 98004 United States Manufacturer: JAXJOX INC Address of Manufacturer: 8720 148th Ave NE Redmond, WA 98052 Factory: JAXJOX INC Address of Factory: 8720 148th Ave NE Redmond, WA 98052 Equipment Under Test (EUT): EUT Name: Dubbell Connect TM Model No.: JJ15001 Trade mark: JAXJOXⓇ FCC ID: 2ATPZJJ15001 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-09-04 Date of Test: 2020-09-04 to 2020-09-22 Date of Issue: 2020-09-22 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885603 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-09-22 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885603 Page: 3 of 6 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST LOCATION ................................................................................................................................ 5 4.3 TEST FACILITY .................................................................................................................................. 5 4.4 DEVIATION FROM STANDARDS ............................................................................................................ 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................... 5 5 SAR EVALUATION ................................................................................................................................. 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ........................................................................................ 6 5.1.1 Standard Requirement ................................................................................................................ 6 5.1.2 Limits .......................................................................................................................................... 6 5.1.3 EUT RF Exposure ....................................................................................................................... 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885603 Page: 4 of 6 4 General Information 4.1 General Description of EUT Power Supply: Dumbbell handle：DC 3.7V 1000mAh 3.7Wh Base: Rechargeable battery: DC 3.7V 1000mAh 3.7Wh (Charge by Type-C) Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Data rate: 1Mbit/s Antenna Type: PCB antenna Antenna Gain: -3dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885603 Page: 5 of 6 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885603 Page: 6 of 6 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885602 Page: 1 of 50 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2009008856CR Applicant: JAXJOX INC Address of Applicant: Lincoln Square South Building 10400 NE 4th ST BELLEVUE Washington 98004 United States Manufacturer: JAXJOX INC Address of Manufacturer: 8720 148th Ave NE Redmond, WA 98052 Factory: JAXJOX INC Address of Factory: 8720 148th Ave NE Redmond, WA 98052 Equipment Under Test (EUT): EUT Name: Dubbell Connect TM Model No.: JJ15001 Trade Mark: JAXJOXⓇ FCC ID: 2ATPZJJ15001 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-09-04 Date of Test: 2020-09-04 to 2020-09-22 Date of Issue: 2020-09-22 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885602 Page: 2 of 50 Revision Record Version Chapter Date Modifier Remark 01 2020-09-22 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885602 Page: 3 of 50 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900885602 Page: 4 of 50 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 7 4.4 TEST LOCATION ............................................................................................................................. 8 4.5 TEST FACILITY ............................................................................................................................... 8 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 8 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 8 5 EQUIPMENT LIST ............................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................11 6.1 ANTENNA REQUIREMENT ................................................................................................................11 6.1.1 Test Requirement: ..................................................................................................................11 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................12 7.1 CONDUCTED PEAK OUTPUT POWER ................................................................................................12 7.1.1 E.U.T. Operation .....................................................................................................................12 7.1.2 Test Mode Description ............................................................................................................12 7.1.3 Test Setup Diagram ................................................................................................................13 7.1.4 Measurement Procedure and Data .........................................................................................13 7.2 MINIMUM 6DB BANDW IDTH .............................................................................................................14 7.2.1 E.U.T. Operation .....................................................................................................................14 7.2.2 Test Mode Description ............................................................................................................14 7.2.3 Test Setup Diagram ............................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 2 Setup Photos for SZEM2009008856CR FCC ID: 2ATPZJJ15001 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 2 1 Photographs Radiated Spurious Emissions Below 1GHz Above 1GHz