2ATU8-W30Wireless Earphones

Reset If earbuds have any connection or function problems, please reset the earbuds: (If the above operation does not work, please try again) 2. Or press and hold the charging case button for 10 seconds. 3. Take out the earbuds and wait for 20 seconds. 1. Delete the pairing information on the device and turn off the device's Bluetooth functionality. Connect 2.After turn on the phone Bluetooth, click <W30> to Pair 1.Take out the earbuds (Power on automatically) Bluetth Devic Bluetoot oo h Device nam e name e W30 Nov K a 30 7 > > Operation X1: Tap OnceLong press Only when it is not connected, it can be turned on or off Problem handling Click on the right earbud to increase volume. Safety Instructions Verbinden 2.Nach dem Öffnen des Telefons Bluetooth, Klicken Sie auf die <W30> zum Koppeln 1.Nehmen Sie die Ohrhörer heraus (Ohrhörer automatisch einschalten) Zurücksetzen Bluetth Devic Bluetoot oo h Device nam e name e W30 Nov K a 30 7 > > Betrieb X1: cliquer une foisPresse longue Nur unverbunden, unterstützt Ein- und Ausschalten Problembehandlung Klicken Sie auf den rechten Kopfhörer + Lautstärke. Sicherheitshinweise Relier 2.Après avoir ouvert le téléphone Bluetooth, cliquez sur l’icône <W30> à l’appairage 1.Sortez les écouteurs (Mise sous tension automatique des écouteurs) Réinitialisation Bluetth Devic Bluetoot oo h Device nam e name e W30 Nov K a 30 7 > > opérer X1: cliquer une foisPresse longue Non connecté uniquement, support commutateur Consignes de sécurité Collegare 2.Dopo aver aperto il telefono Bluetooth, tFare clic sull'icona <W30> all'accoppiamento 1.Estrarre gli auricolari (Accensione automatica degli auricolari) Resettare Bluetth Devic Bluetoot oo h Device nam e name e W30 Nov K a 30 7 > > Operazione X1: fare clic una voltaPressa lunga Solo quando non è collegato, può essere acceso o spento Gestione dei problemi Fare clic sulla cuffia destra + volume. Istruzioni di sicurezza Conectar 2.Después de abrir el teléfono Bluetooth, haga clic en el botón <W30> al emparejamiento 1.Saca los auriculares (Encendido automático de los auriculares) Restablecimiento Bluetth Devic Bluetoot oo h Device nam e name e W30 Nov K a 30 7 > > operación X1: hacer clic una vezPresión larga Solo no conectado, admite encendido / apagado Manejo de problemas Haga clic en el auricular derecho + volumen. Instrucciones de seguridad 接続 2.電話を開いた後 Bluetooth、クリック < W30>からペアリングへ 1.ヘッドホンを取り外します (ヘッドセット自動ブート) リセット Bluetth Devic Bluetoot oo h Device nam e name e W30 Nov K a 30 7 > > 操作 X1: 一 度クリックする長押し 接続していないときだけ、オンまたはオフにすることができます セキュリティの説明 Gestion des problèmes Cliquez sur le casque droit + volume. 問題の処理 右側のヘッドフォン+音量をクリックします。 Reject a callAnswer/hang upVoice AssistantReset Switch SongAdjust VolumePlay /Pause X2X1 - + 5S 3S Power on/off X22S 2S Siri X3 SprachassistentZurücksetzen Annehmen/Auflegen Anruf ablehnen Abspielen/pauseAbspielen/pauseLautstärke anpassenEin-/Ausschalten X2X1 - + 5S 3S X22S 2S Siri X3 Répondre/raccrocher Rejeter l'appelAssistant vocalRéinitialisation Lecture/PauseChanger de ChansonRégler le Volume X2X1 - + 5S 3S Marche/arrêt X22S 2S Siri X3 Assistente vocaleResettare Rispondi/riaggancia Respingere Riproduci/PausaCambia canzoneRegola il volumeAccendere/ Spegnere X2X1 - + 5S 3S X22S 2S Siri X3 RechazarAsistente de vozRestablecimiento Responder/colgar Reproducir /PausaCambiar canciónAjustar el VolumenEncendido/apagado X2X1 - + 5S 3S X22S 2S Siri X3 リセット 回答/ハングアップ 着信を拒否するウェイクアップシリ 再生/一時停止音楽を切り替える音量を調整する X2X1 - + 5S 3S 電源のオン/オフ X22S 2S Siri X3 Oder halten Sie das Ladeetui 10 Sekunden lang gedrückt. Ou appuyez sur le boîtier de charge pendant 10 secondes. Oppure premi la custodia di ricarica per 10 secondi. O presione el estuche de carga durante 10 segundos. または、充電ケースのボタンを10秒間押し続けます。 Clean the charging contactors of the earbuds and the charging case. Please clean the charging contactors of the earbuds and charging case frequently to avoid charging failures. (Wenn der obige Vorgang nicht funktioniert, versuchen Sie es bitte erneut) X5 X5 X5 X5 X5 X5 ② One of earbuds cannot be charged: W30 FCC ID: 2ATU8-W30 FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

BESINGTECHNOLOGY(SHENZHEN)CO.,LTD Rev1/26/2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025-10-8 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2ATU8-W30 BESINGTECHNOLOGY(SHENZHEN)CO.,LTD(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. BESINGTECHNOLOGY(SHENZHEN)CO.,LTD(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegratedKaspersky Lab,Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24- 886andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) ContactName:AliDeng

BESINGTECHNOLOGY(SHENZHEN)CO.,LTD Rev1/26/2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025/10/8 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2ATU8-W30 BESINGTECHNOLOGY(SHENZHEN)CO.,LTD(“theapplicant”)certifiesthat,asofthedateofthefilingof theapplication,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityorany ofitssubsidiariesoraffiliates)asanentityproducing“covered” equipment. Sincerely, (Applicantsignature) ContactName:AliDeng

BESINGTECHNOLOGY(SHENZHEN)CO.,LTD Rev1/26/2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025/10/8 Ref:AttestationStatementsPart2.911(d)(7)Filing FCCIDorGranteeCode:FCCID:2ATU8-W30or2ATU8 ApplicantFRN:0028618254 BESINGTECHNOLOGY(SHENZHEN)CO.,LTD( “ theapplicant ” )certifiesthat,asofthedateofthefilingof theapplication,REPAmericaLLCisourdesignatedU.S.agentforserviceofprocessfortheabove referencedFCCID.BESINGTECHNOLOGY(SHENZHEN)CO.,LTDacceptstomaintainanagentfornoless thanoneyearafterthegranteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. REPAmericaLLCaccepts,asofthedateofthefilingoftheapplication,theobligationofthedesignated U.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:REPAmericaLLC S.AgentFRN:0034192500 Address:350TerrySt.200Longmont,CO80501UnitedStates ContactPerson:MrBenXu Tel.:(719)201-3314 Email:[email protected] Sincerely, AliDengMrBenXu BESINGTECHNOLOGY(SHENZHEN)CO.,LTDREPAmericaLLC [InsertApplicantsignature][U.S.Agentsignature]

FCCID:2ATU8-W30 BESINGTECHNOLOGY(SHENZHEN)CO.,LTD ModelConfirmationLetter We,BESINGTECHNOLOGY(SHENZHEN)CO.,LTD,certifythe product:WirelessEarphones,ModelNo.:W30,W31.Theproducthas manymodels,onlythemodelname,colorandshapeisdifferent, andtheotherpartssuchasthecircuitprinciple,pcbandelectrical structurearethesame.Testsamplemodel:W30 Signiture:AliDeng CompanyName:BESINGTECHNOLOGY(SHENZHEN)CO.,LTD Date:2025/10/8

BESINGTECHNOLOGY(SHENZHEN)CO.,LTD Rev11/20/07 FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2ATU8-W30. PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitType Schematics Blockdiagram Operationdescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealsorequest temporaryconfidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitType Sincerely, (signature) AliDeng

FCCID:2ATU8-W30 External FCCID:2ATU8-W30 FCCID:2ATU8-W30 FCCID:2ATU8-W30 FCCID:2ATU8-W30 FCCID:2ATU8-W30 FCCID:2ATU8-W30 FCCID:2ATU8-W30 FCCID:2ATU8-W30

LabelLocation: Label:5*12mm NOTE:DuetotheproductbeingtoosmalltoprinttheFCCIDcode,FCCIDisprintedonthe productboxandinstructionmanual W30 FCCID:2ATU8-W30

FCCID:2ATU8-W30 Internal FCCID:2ATU8-W30 FCCID:2ATU8-W30 FCCID:2ATU8-W30 FCCID:2ATU8-W30 ANT

Page1of1 RFExposureEvaluationReport 1RFEXPOSURE ProductName:WirelessEarphones ModelNo:W30 FCCID:2ATU8-W30 NOTE:accordingtoKDB447498D01GeneralRFExposureGuidancev06 ， Unlessspecifically requiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-g extremitySARevaluationforgeneralpopulationexposureconditions,bymeasurementornumerical simulation,isnotrequiredwhenthecorrespondingSARTestExclusionThresholdcondition(s), listedbelow,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: TheEUTisaportabledevice [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Theproductisusedatadistanceof5mmfromthehumanbody. Here, 1.1EUTRFEXPOSUREEVALUATION OperationalMode:EDR Channel (MHz) MaximumPeak Conducted OutputPower (dBm) Tuneup tolerance (dB) Maximum tune-up Power (dBm) Maximum tune-up Power (mW) Calculated value Exclusion threshold 24805.62 ±1 63.9811.2343 Conclusion:thecalculatedvalue≤3.0,SARisexempted.

5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 1 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com Product Name: WiFi/Bluetooth Chip Antenna – CW201 Part Number: H2U34C1H1B0100 Features: z Supporting WiFi/Bluetooth, covering 2400 to 2484 MHz z Surface Mount z Dimensions: 2.0 x 1.2 x 0.6 mm z High performance, small size. z RoHS & REACH Compliant Applications: z ISM 2.4 GHz applications z ZigBee/BLE applications z Bluetooth earphone systems z Hand-held devices when WiFi / Bluetooth functions are needed, e.g., Smart phones z IEEE802.11 b/g/n z Wireless PCMCIA cards or USB dongles 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 2 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com WiFi/Bluetooth Chip Antenna MODEL: CW201 Version: A I. Specifications: Mechanical Specifications Dimensions (mm) 2.0(L) x 1.2 (W) x 0.6 (H) Material Ceramic Termination Ag (environmental Pb free) Environmental Conditions Operation Temperature ( o C) -40 ~ +85 Storage Temperature ( o C) -5 ~ +40 Relative Humidity 10 ~ 70 % Items Specifications Frequencies (MHz) 2400~2484 Efficiency (%) 59.2 Average Gain (dB) -2.3 Peak Gain (dBi) 1.8 Test Condition 40 x 20 mm² (Evaluation board) Impedance (ƻ) 50 Polarization Linear Polarization 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 3 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com II. Layout Guide: Solder Land Pattern: The solder land pattern (gold marking areas) is shown below. Recommendation on matching circuit will be provided according to customer’s installation conditions. Grounding Pin Signal Input Transmission Line with 50ƻ Impedance Characteristic Top View Bottom View 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 4 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com III. Mechanical Dimensions: a) Antenna Dimensions b) PIN Definition PIN 1 2 Soldering Pad Signal Input Tuning/Signal Output TOP View Bottom View Side View Unit: mm Unit: mm 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 5 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com c) Test Board with Antenna Unit: mm 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 6 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com IV. Properties: a) Return loss (dB) b) Efficiency (%) 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 7 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com c) Average Gain (dB) d) Peak Gain (dBi) 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 8 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com V. Antenna Radiation Pattern Measurement: The antenna radiation patterns are measured in Unictron’s 3D Anechoic Chamber. The measurement setup is as show below. Z Y X 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 9 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com 3D Radiation Gain Pattern 2450 MHz (unit: dBi) X Y Z 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 10 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com VI. Frequency tuning: System Matching Circuit Component Location Description Vendor Tolerance 1 N/C - - 2 5.0 pF (0402) MURATA ±0.05 pF 3 0.8 pF (0402) MURATA ±0.05 pF 4 2.7 pF (0201) MURATA ±0.05 pF DC Block 22 pF (0402) MURATA ±5% 1 3 2 DC Block 4 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 11 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com VII. Soldering conditions: Typical Soldering Profile for Lead-free Process VIII. Reminders for use of Unictron’s ceramic chip antennas: a) This chip antenna is made of ceramic materials which is relatively more rigid and brittle compared to circuit board materials. Furthermore, the length of this antenna is quite long. Bending of circuit board at the locations where chip antenna is mounted may cause the cracking of solder joints or antenna itself. b) Punching/cutting of the break-off tab of PCB panel may cause severe bending of the circuit board which may result in cracking of solder joints or chip antenna itself. Therefore break-off tab shall be located away from the installation site of chip antenna. c) Be cautious when ultrasonic welding process needs to be used near the locations where chip antennas are installed. Strong ultrasonic vibration may cause the cracking of chip antenna solder joints. 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 12 © Unictron Technologies Corp . All specifications subject to change with…

Text truncated - open the document above for the full version.

V1.0ReportNo.:DACE250702019RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 1 of 95 RFTESTREPORT For BESINGTECHNOLOGY(SHENZHEN)CO.,LTD ProductName:WirelessEarphones TestModel(s):W30 ReportReferenceNo.:DACE250702019RL001 FCCID:2ATU8-W30 Applicant’sName:BESINGTECHNOLOGY(SHENZHEN)CO.,LTD Address: 2F,Block1,TianxinResidentGroupIndustrialPark,Shangwu Community,ShiyanStreet,BaoanDistrict,Shenzhen,China TestingLaboratory:ShenzhenDACETestingTechnologyCo.,Ltd. Address: 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark, TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen, Guangdong,China TestSpecificationStandard:47CFRPart15.247 DateofReceipt:July2,2025 DateofTest:July2,2025toAugust23,2025 DataofIssue:August23,2025 Result:Pass Note:Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenDACE TestingTechnologyCo.,Ltd.ThisdocumentmaybealteredorrevisedbyShenzhenDACETestingTechnology Co.,Ltd.personnelonly,andshallbenotedintherevisionsectionofthedocument.Thetestresultsinthe reportonlyapplytothetestedsample V1.0ReportNo.:DACE250702019RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 2 of 95 Applyforcompanyinformation Applicant’sName:BESINGTECHNOLOGY(SHENZHEN)CO.,LTD Address:2F,Block1,TianxinResidentGroupIndustrialPark,Shangwu Community,ShiyanStreet,BaoanDistrict,Shenzhen,China ProductName:WirelessEarphones TestModel(s):W30 SeriesModel(s):W31 TestSpecificationStandard(s):47CFRPart15.247 NOTE1: Themanufacturershouldensurethatallproductsinseriesproductionareinconformitywiththeproductsampledetailedin thisreport.Iftheproductinthisreportisusedinanyconfigurationotherthanthatdetailedinthereport,themanufacturer mustensurethenewsystemcomplieswithallrelevantstandards. Compiledby: Supervisedby: Approvedby: KerenHuang/TestEngineerBenTang/ProjectEngineerMachaelMo/Manager August23,2025August23,2025August23,2025 V1.0ReportNo.:DACE250702019RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 3 of 95 RevisionHistoryOfReport VersionDescriptionREPORTNo.IssueDate V1.0OriginalDACE250702019RL001August23,2025 V1.0ReportNo.:DACE250702019RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 4 of 95 CONTENTS 1TESTSUMMARY...................................................................................................................................................6 1.1TESTSTANDARDS........................................................................................................................................6 1.2SUMMARYOFTESTRESULT.........................................................................................................................6 2GENERALINFORMATION....................................................................................................................................7 2.1CLIENTINFORMATION..................................................................................................................................7 2.2DESCRIPTIONOFDEVICE(EUT)..................................................................................................................7 2.3DESCRIPTIONOFTESTMODES....................................................................................................................8 2.4DESCRIPTIONOFSUPPORTUNITS................................................................................................................8 2.5EQUIPMENTSUSEDDURINGTHETEST........................................................................................................9 2.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................11 2.7IDENTIFICATIONOFTESTINGLABORATORY.................................................................................................11 2.8ANNOUNCEMENT........................................................................................................................................11 3EVALUATIONRESULTS(EVALUATION)...........................................................................................................12 3.1ANTENNAREQUIREMENT............................................................................................................................12 4RADIOSPECTRUMMATTERTESTRESULTS(RF).........................................................................................13 4.1CONDUCTEDEMISSIONATACPOWERLINE................................................................................................13 4.1.1E.U.T.Operation:........................................................................................................................13 4.1.2TestSetupDiagram:...................................................................................................................13 4.1.3TestData:...................................................................................................................................14 4.2MAXIMUMCONDUCTEDOUTPUTPOWER....................................................................................................16 4.2.1E.U.T.Operation:........................................................................................................................16 4.2.2TestSetupDiagram:...................................................................................................................16 4.2.3TestData:.............................…

Text truncated - open the document above for the full version.

FCCID:2ATU8-W30 ConductedEmissionatACpowerline Emissionsinfrequencybands(below1GHz) FCCID:2ATU8-W30 Emissionsinfrequencybands(above1GHz)