2ATZ4-G6Smart phone

PG2311GBA G6 Quick Start Guide Made in China Manufacturer: Shenzhen Youmi lntelligent Technology Co., Ltd Add: 406-407 Jinqi Zhigu Building,4/F, 1 Tangling Road, Nanshan District, Shenzhen City, Guangdong Province China English Greetings From UMIDIGI Mobile This guide will show you how to use the phone and its important functions. You may also visit UMIDIGI’s official website to get more information about the phone. How to Restart the Phone Press the Power Button for a few seconds until the UMIDIGI restart animation is displayed to restart the phone. How to Transfer Old Mobile Content to a New Mobile You can use UMIDIGI Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one in the following three approaches. Transfer Cable You can use a USB-C transfer cable to directly connect the old and new phones and transfer data. Google Account Backup and Restore 1. Ensure that both phones are connected to Wi-Fi and have your Google account signed in. 2. On the old phone, go to "Settings" > "System" > "Backup" and ensure that "Back up to Google Drive" is enabled. Back up your data. 3. On the new phone, sign in with the same Google account during setup. Your apps, contacts, calendar events, and some other settings should automatically sync and restore. Security information (including BS, ES, and battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, and OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly. Warning Do not place the phone or battery near or inside heating equipment, cooking equipment, or high-ressure vessels (such as microwave ovens, induction cookers, electric ovens, heaters, pressure cookers, water heaters, gas stoves, etc.) to prevent the battery from overheating which may lead to an explosion. The original charger, data cable, and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards. When charging, please place the device in an environment that has a normal room temperature and good ventilation, it is recommended to charge the device in an environment with a temperature ranging from 5°C~35°C. The back cover can't be removed. Deutsch Grüße von UMIDIGI Mobile Diese Anleitung zeigt Ihnen, wie Sie das Telefon benutzen und welche wichtigen Funktionen es hat. Sie können auch die offizielle Website von UMIDIGI besuchen,um weitere Informationen über das Telefon zu erhalten. Neustart des Telefons Drücken Sie die Einschalttaste einige Sekunden lang, bis die UMIDIGI-Neustartanimation angezeigt wird, um das Telefon neu zu starten. Übertragen alter Handy-Inhalte auf ein neues Handy Sie können UMIDIGI Phone verwenden, um ganz einfach Fotos, Videos, Musik, Kontakte,Nachrichten, Apps usw. von Ihrem alten Telefon auf das neue zu übertragen. Übertragungskabel Sie können ein USB-C-Übertragungskabel verwenden, um das alte und das neue Telefon direkt zu verbinden und Daten zu übertragen. Google-Konto sichern und wiederherstellen 1. Vergewissern Sie sich, dass beide Telefone mit Wi-Fi verbunden sind und IhrGoogle-Konto angemeldet ist. 2. Gehen Sie auf dem alten Telefon zu "Einstellungen" > "System" > "Sicherung" und stellen Sie sicher, dass "Auf Google Drive sichern" aktiviert ist. Sichern Sie Ihre Daten. 3. Melden Sie sich auf dem neuen Telefon mit demselben Google-Konto an wie bei der Einrichtung. Ihre Apps, Kontakte, Kalenderereignisse und einige andere Einstellungen sollten automatisch synchronisiert und wiederhergestellt werden. Die Sicherheitsinformationen (einschließlich BS-, ES- und Akkusicherheitsinformationen) der Installation und Funktion von Software von Drittanbietern können in verschiedenen Regionen oder durch unterschiedliche Hardwarespezifikationen variieren. UMIDIGI übernimmt keine Haftung für Leistungsprobleme oder Inkompatibilität, die durch Anwendungen von Drittanbietern, Bearbeitung der Registrierung und Änderung der Betriebssystemsoftware verursacht werden. Die Anpassung des Betriebssystems kann dazu führen, dass das Gerät oder einige Anwendungen nicht richtigfunktionieren. Warnung Legen Sie das Telefon oder den Akku nicht in der Nähe von oder in Heizgeräten, Kochgeräten oder Hochdruckbehältern ab (z. B. Mikrowellenherde, Induktionsherde, Elektroherde, Heizgeräte, Schnellkochtöpfe,Warmwasserbereiter, Gasherde usw.), um eine Überhitzung des Akkus zu vermeiden,die zu einer Explosion führen kann. Bitte stellen Sie das Gerät beim Aufladen in eine Umgebung mit normaler Raumtemperatur und guter Belüftung. Es wird empfohlen, das Gerät in einer Umgebung mit einer Temperatur zwischen 5°C und 35°C aufzuladen. Die hintere Abdeckung kann nicht entfernt werden. ltaliano Saluti da UMIDIGI Mobile Questa guida vi mostrerà come utilizzare il telefono e le sue funzioni più importanti. È inoltre possibile visitare il sito Web ufficiale di UMIDIGI per ottenere ulteriori informazioni sul telefono. Come riavviare il telefono Premere il pulsante di accensione per alcuni secondi finché non viene visualizzata l'animazione di riavvio UMIDIGI per riavviare il telefono. Backup e ripristino dell'account Google 1. Assicuratevi che entrambi i telefoni siano connessi alla rete Wi-Fi e che il vostro account Google sia attivo. 2. Sul vecchio telefono, andare su "Impostazioni" > "Sistema" > "Backup" e assicurarsi che "Backup su Google Drive" sia abilitato. Eseguire il backup dei dati. 3. Sul nuovo telefono, accedere con lo stesso account Google utilizzato durante la configurazione. Le app, i contatti, gli eventi del calendario e alcune altre impostazioni dovrebbero essere sincronizzate e ripristinate automaticamente. Cavo di trasferimento È possibile utilizzare u…

Text truncated - open the document above for the full version.

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2024-01-05 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2ATZ4-G6 Shenzhen Youmi Intelligent Technology Co., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Contact Person:Wang Kun Title:Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2024-01-05 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2ATZ4-G6 Shenzhen Youmi Intelligent Technology Co., Ltd. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Contact Person:Wang Kun Title:Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2024-01-05 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2ATZ4-G6 Shenzhen Youmi Intelligent Technology Co., Ltd. certifies that, as of the date of the filing of the application, Wilson Tech Service LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Shenzhen Youmi Intelligent Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Wilson Tech Service LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Wilson Tech Service LLC Address: 1312 17th Street Suite 692, Denver, CO, 80202, United States FRN: 0033402033 Tel.: +1-716-965-5112 Email: [email protected] Signed by (printed name): Wilson Cheung Signature: Applicant: Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China FRN: 0028652048 Tel: 86-075583220991 Email: [email protected] Signed by (printed name): Wang Kun Signature:

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2024-01-05 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Shenzhen Youmi Intelligent Technology Co., Ltd., the undersigned, hereby authorizes World Alliance Testing and Certification (Shenzhen) Co., Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by World Alliance Testing and Certification (Shenzhen) Co., Ltd on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Wang Kun Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] FCC Confidential Authorization Date: 2024-01-05 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ATZ4-G6 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Youmi Intelligent Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Parts List/Tune up procedure (for licensed devices)  Software Security Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Wang Kun Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] Date: 2024-01-05 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD21046 Dear Sir/Madam, Our product Smart phone, model: PG2311GBA, FCC ID: 2ATZ4-G6, for marketing purpose, this product only supports GSM850/PCS1900; WCDMA Band 2/5; LTE band 2/5/7/12/41(2535-2655MHz), BT, BLE 1M/2M(BLE 2M only support 2404-2478MHz), 2.4G Wi-Fi (2412-2462MHz/2422-2452MHz), 5G Wi-Fi(5150-5250MHz; 5725-5850MHz), NFC, GNSS and FM, the other functions and bands were disabled to use by manufacture in the software, the end user has no capability to activate it. Signature: Wang Kun Manager

Report No.: RWAZ202300129 Page 1 of 6 EUT EXTERNAL PHOTOGRAPHS Report No.: RWAZ202300129 Page 2 of 6 Report No.: RWAZ202300129 Page 3 of 6 Report No.: RWAZ202300129 Page 4 of 6 Report No.: RWAZ202300129 Page 5 of 6 Adapter 1 Report No.: RWAZ202300129 Page 6 of 6 Adapter 2

The E-label information To access the e-label information, in the device, Choose: Settings > About phone > Authentication information Detailed as follows: Scroll through the menu to find and select Settings Scroll down in Settings to find and select About phone Scroll down in About phone to find and select Authentication information The e-label will display Regulatory information

IC:26074-G6 HVIN:G6M510-MB-A FCC ID:2ATZ4-G6 5GHz band(W52)Indoor use 36.00 mm 4 2 . 0 m 0 m PG2311GBA UMIDIGI G6 Memory: RAM 4GB+ROM 128GB SN:XXXXXXXXXXXXXX IMEI 1:XXXXXXXXXXXXXXX IMEI 2:XXXXXXXXXXXXXXX 211-231205 ADF230036211 Made in China Label Label location IC:26074-G6 HVIN:G6M510-MB-A FCC ID:2ATZ4-G6 5GHz band(W52)Indoor use PG2311GBA UMIDIGI G6 Memory: RAM 4GB+ROM 128GB SN:XXXXXXXXXXXXXX IMEI 1:XXXXXXXXXXXXXXX IMEI 2:XXXXXXXXXXXXXXX 211-231205 ADF230036211 Made in China

Report No.: RWAZ202300129 Page 1 of 12 EUT INTERNAL PHOTOGRAPHS Report No.: RWAZ202300129 Page 2 of 12 Report No.: RWAZ202300129 Page 3 of 12 Report No.: RWAZ202300129 Page 4 of 12 Report No.: RWAZ202300129 Page 5 of 12 Report No.: RWAZ202300129 Page 6 of 12 Report No.: RWAZ202300129 Page 7 of 12 Report No.: RWAZ202300129 Page 8 of 12 Report No.: RWAZ202300129 Page 9 of 12 Report No.: RWAZ202300129 Page 10 of 12 Bluetooth &Wi-Fi ANT Report No.: RWAZ202300129 Page 11 of 12 DIV ANT NFC ANT Report No.: RWAZ202300129 Page 12 of 12 WWAN Main ANT Battery

Report No.: RWAZ202300129K Report Template: TR-4-E-016/V1 Page 1 of 5 RF Exposure Evaluation Report Report No.: RWAZ202300129K Applicant: Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Product Name: Smart phone Product Model: PG2311GBA Multiple Models: N/A Trade Mark: UMIDIGI FCC ID: 2ATZ4-G6 Standards: 47 CFR §1.1310 KDB 447498 D01 General RF Exposure Guidance v06 Test Date: 2023/12/22~2024/02/22 Test Result: Complied Report Date: 2024/02/27 Reviewed by: Approved by: Abel Chen Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: RWAZ202300129K Report Template: TR-4-E-016/V1 Page 2 of 5 Announcement 1．This test report shall not be reproduced in full or partial, without the written approval of World Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 27, Feb,2024 Original Report No.: RWAZ202300129K Report Template: TR-4-E-016/V1 Page 3 of 5 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Laboratory Location ................................................................................................................... 4 2 RF Exposure Evaluation ..................................................................................................................... 5 2.1 Standard .................................................................................................................................... 5 2.2 Result ......................................................................................................................................... 5 Report No.: RWAZ202300129K Report Template: TR-4-E-016/V1 Page 4 of 5 1 General Information 1.1 Client Information Applicant: Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Manufacturer: Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China 1.2 Product Description of EUT Sample Serial Number 2X-5 (assigned by WATC) Sample Received Date 2023-12-05 Sample Status Good Condition Frequency Range BT/BLE: 2402MHz - 2480MHz NFC: 13.56MHz Maximum Conducted Output Power Bluetooth: 6.36dBm. BLE: -4.25dBm NFC: 66.49dBuV/m@3m Modulation Technology Bluetooth: GFSK, π/4 DQPSK, 8DPSK BLE: GFSK NFC: ASK Antenna Gain # BT/BLE:1.1dBi NFC: 0.98dBi Power Supply DC 3.87V from battery or DC 5V from USB Port Adapter Information Adapter 1 Model: HF-0502000U Input: AC100-240V, 50/60Hz, 0.3A Output: DC 5.0V, 2A Adapter 2 Model: HJ-0502000W2-US Input: AC100-240V, 50/60Hz, 0.3A Output: DC 5V, 2A Modification Sample No Modification by the test lab 1.3 Laboratory Location World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China Tel: +86-755-29691511, Email: [email protected] The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 463912, the FCC Designation No. : CN5040. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0160. Report No.: RWAZ202300129K Report Template: TR-4-E-016/V1 Page 5 of 5 2 RF Exposure Evaluation 2.1 Standard According to §1.1310, radio frequency devices shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 2.2 Result Radio Frequency (MHz) Maximum Conducted Power including Tune-up Tolerance (dBm) Min. t…

Text truncated - open the document above for the full version.

ANT M Addres Huanin Cu 安 Par t 颜 C 销 Sale 结 Str 日 客户确 Manufacturers ss:2nd Floor, ng Road, Dala 客户 ustomer 威料号 t Number 颜 色 Color 销 售 esperson 结 构 ructure 日 期 Date 确认Custom : ANWEI com East Block, B u ng Street, Lon An G6 G G6 4G-2.4G G6 5 Q mer confirm mnuication Eq uilding 5, Yifen nghua District nten Youmi 6 4G-MAIN-A 6 4G-DIV-A GWIFI/GPS/ 5G-NFC/FM black Mr.Xie QIN YUN LIN 2023.12.5 mation: quipment Co. nghua Innovat , Shenzhen Ci nna s AW AW /5GWIFI-AW M-AW N 携手共 Join hand 1 ,Ltd tion Industria ty, Guangdo n spec / 规格型 Spec W 频 Frequen c 版 Editi 设 Desi 共进 共创 ds to create t l Park, ng Province cifica 型号 cs 段 cy Band GSM WC LTE 5/2 BT& 5G 本 on 计 gn 创未来 the future atio MB8/B2/B3 CDMA:B1/B :1/2/3/4/5 / 26/28/66/71 &2.5G WIFI WIFI:5100~ ons PG2311GB 3/B5 2/B4/B8/B5 /7/8/12/13 1/34/38/39 :2400~2483 ~5800MHZ REV:A0 WUXI BA 5/B6 /17/18/19 / 9/40/41 3.5MHZ /20/2 anten MAIN 1. Pr The re nna is a 4G a ANT roduct spe port mainly antenna. (A ecification y provides p As shown be ns parameter t elow) 2 esting of PGG2311GBA aantenna peerformance. The PG23111GBA DIV A N NT 3 BT& W WiFi&GNSS An ntenna 4 NFC+ F FM ANT 5 frequ 2. El (1.) Spe The w ency band A 3. Pa (1.) T The E507 Hand Use the m other 4. Se The Agile (1.) AW zon (2 The pow rad sen ant e ectrical p ecifications orking freq ntenna stru arameter Test settin sequential 71B Networ dling of test a hard cab mobile phon devices in t ettings for active test d ent8960→5 ) test site W microwave e range is 4 2.) Test Re e maximum wer radiatio iation spac sitivity of t enna. erforman and standa quency ban ucture: FPC testing ngs connection rk Analyzer→ t fixtures: le to lead o ne PCB, con turn. r active te device conn 50 ohm coa e anechoic 40cm circum sults m radiated p on value a e. TRP and the antenna ce ards d of anten s of the VSW →50 ohm c out the SMA nnect it to a esting nections in s xial cable→ chamber: T mference, an power and nd best r e d TIS reflect a, that is, t 6 nna is 699~ WR test dev coaxial cable A-J connect a copper tu sequence a →Satimo SG The test fre nd the refle maximum eceiving pe t the avera they reflect ~960MHZ, 1 vice are: e→110mm tor from the ube covered re: 16 test syst equency ran ectivity is les receiving s erformance age radiated t the overa 1710~2700M m long coppe e 50 ohm t d with a ch tem→Mobi nge is 400M ss than -90 sensitivity r of the an d power an ll receiving MHZ, and er tube→Te test point o oke, and th ile phone to MHz-6GHz, dB. reflect the ntenna in t nd average performa n resonates i est Fixture f the anten hen connec o be tested the quiet maximum the entire receiving nce of the n this nna on ct it to The e following are the mobile phone 7 antenna acctive test reesults: Main 工作频 2G 3G 4G BT/WI GPS n antenna 频段(Working IFI a: g frequency b 2/3/ 1/2/ CDMA B1/2 2.4G 1575 band)：699~9 /5/8 /4/5/6/8 A:BC0/BC10 2/3/4/5/7/ G+5G 5.42MHz 960MHZ, 171 0/BC1 /8/12/13/ 8 10~2700MHZ 17/18/19/2 20/25/26/28/66/71/34/38/39/40/41 CDDMA:BC0/BC D P C LTE:B1 C10 GSM85 GSM900,W DCS1800,WC PCS1900,WC CDMA:BC1 W LTE 2. 频段Band 12/17/28 NR LTE:B13 LTE:B71 0,WCDMA-B WCDMA-B8 CDMA-B4 ,L CDMA-B2,LT WCDMA-B1,L E-B7/B38/B4 LTE-B40 GPS .4G WIFI/BT 5G WIFI NFC FM R:N28 B5/6,LTE-B5 ,LTE-B8 TE-B3/4/66 TE-B39/25/2 LTE-B1/B34 41 T 9 /18/19/20/26 Gain (dB -4.5 -3.6 -5.0 6 -4.0 -3.8 1. 1.1 0.6 0.4 1.4 1. 1. 0.5 0.9 1.0 增益 Bi) 55 69 03 02 85 2 15 68 47 46 5 1 55 98 02 10 11 12 13 GPS/ 工作频 /WIFI/BT: 频段(Working g frequency bband)：1560~~1580MHZ， 14 2400~2500MMHZ,5180~85525MHZ Joinn Hands To 15 Creatte Thee Futur re

Report No.: RWAZ202300129A Report Template: TR-4-E-006/V1 Page 1 of 44 FCC Test Report Report No.: RWAZ202300129A Applicant: Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Product Name: Smart phone Product Model: PG2311GBA Multiple Models: N/A Trade Mark: UMIDIGI FCC ID: 2ATZ4-G6 Standards: FCC CFR Title 47 Part 15C (§15.247) Test Date: 2023/12/22~2024/01/26 Test Result: Complied Report Date: 2024/02/27 Reviewed by: Approved by: Abel Chen Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: RWAZ202300129A Report Template: TR-4-E-006/V1 Page 2 of 44 Announcement 1．This test report shall not be reproduced in full or partial, without the written approval of World Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 27, Feb,2024 Original Report No.: RWAZ202300129A Report Template: TR-4-E-006/V1 Page 3 of 44 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Antenna information .................................................................................................................. 4 1.4 Related Submittal(s)/Grant(s) .................................................................................................... 5 1.5 Measurement Uncertainty ......................................................................................................... 5 1.6 Laboratory Location ................................................................................................................... 5 1.7 Test Methodology ...................................................................................................................... 5 2 Description of Measurement .............................................................................................................. 6 2.1 Test Configuration ...................................................................................................................... 6 2.2 Test Auxiliary Equipment ........................................................................................................... 6 2.3 Test Setup .................................................................................................................................. 7 2.4 Test Procedure .......................................................................................................................... 9 2.5 Measurement Method .............................................................................................................. 10 2.6 Measurement Equipment ......................................................................................................... 11 3 Test Results ....................................................................................................................................... 12 3.1 Test Summary .......................................................................................................................... 12 3.2 Limit ......................................................................................................................................... 13 3.3 AC Line Conducted Emissions Test Data ................................................................................ 14 3.4 Radiated emission Test Data ................................................................................................... 18 3.5 RF Conducted Test Data ......................................................................................................... 29 3.5.1 20 dB Emission Bandwidth and 99% Occupied Bandwidth ......................................... 29 3.5.2 Maximum Conducted Peak Output Power ................................................................... 29 3.5.3 Channel separation ...................................................................................................... 30 3.5.4 Number of hopping Frequency .................................................................................... 30 3.5.5 Time of occupancy (dwell time) .................................................................................... 30 3.5.6 100 kHz Bandwidth of Frequency Band Edge ............................................................. 31 4 Test Setup Photo ............................................................................................................................... 43 5 E.U.T Photo ........................................................................................................................................ 44 Report No.: RWAZ202300129A Report Template: TR-4-E-006/V1 Page 4 of 44 1 General Information 1.1 Client Information Applicant: Shenzhen Youmi Intelligent Te…

Text truncated - open the document above for the full version.

Report No.: RWAZ202300129 Page 1 of 2 TEST SETUP PHOTOGRAPHS AC Line Conducted Emission Report No.: RWAZ202300129 Page 2 of 2 RadiatedEmission Below 1GHz Above 1 GHz