2AU7DWPC20076-01Wireless Charger

Note: To ensure a good conversion efficiency during the charging process, please connect to mobile phone standard 5V2A charger or 9V charger with fast charging function when using. Wireless charging mobile phone charging diagram Note: Please check whether your device supports wireless charging before using this product for charging! Indicator status description LED indicator LED indicator status Red light off blue light off Red light off blue light on The device is charging Power on and Enter standby Charging status LED indicator Red light on Blue light on Red light on blue light off Red light on blue light off Report an error There is a metal foreign body contacting the sensing area The device is fully charged 12 345 Plastic Shell Separate Super Magnetic Wireless Fast Charging Base(15W） User Manual To ensure safety, please read this manual carefully before use and follow the instructions herein.Store this manual in a secure place for future reference. This product is used to charge DC input mobile phones and other electronic devices. Technical specifications product name product model Input Output Power Product Size product weight Operating temperature ( ) Plastic shell separate super magnetic wireless fast charging base(15W） PD 5V 2A 9V 2.22A 5V 1A 9V 1.12A 9V 1.67A 5W/7.5W/10W/15W 62*62*4.2mm About 46g 0°C~40°C LED indicator Type-C input interface Do not place this product on carpets, heaters, fabric materials, or expose to direct sunlight. Do not drop, squeeze, disassemble or puncture this product by yourself. Do not place this product in a high temperature, humid environment. Do not throw this product into fire, water or liquid containing corrosiveness. Please keep the temperature between 0°C~35°C during charging. Do not place this product on flammable materials (beds and blankets) while charging. If you find that the product has swelling or other undesirable phenomena and malfunctions, please stop using the product immediately and contact your dealer. Unless a professional is nearby to supervise and guide and ensure the safety of the user, the following people(including children) are not suitable to use this product: people with deteriorating physical function or mental capacity, those with insufficient knowledge of this equipment and lack of operating experience, Be sure to supervise children to ensure safe use. Cautions Name and content of hazardous substances in the product Part Name Harmful Substance Circuit board assembly Hardware parts Plastic parts Accessories This form is compiled in accordance with SJ/T 11364-2014. O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement of GB/T 26572. X: Indicates that the hazardous substance contained in at least one of the homogeneous materials of the part exceeds Note: 1. The environmental protection service life marked on this product only applies to the product working under the conditions specified in the user manual. 2. The reason why this product is marked with "X" is that there is no alternative technology or component to choose from at this stage. This product still meets the restriction requirements of the EU RoHS Directive 2015/863/EU. Warranty Card Warranty period: The warranty period of this product is valid within 12 months from the date of purchase. Free service: Free maintenance is not available in the following situations: During the product warranty period, for any faults caused by the quality of the product itself, the user is requested to contact the dealer with this warranty card and purchase certificate to enjoy free warranty. 1.The product warranty period exceeds period; 2.No warranty card or damaged product label; 3. Failure to use in accordance with the instructions, or damage caused by the use of non-original accessories; 4.Damage caused by yourself dismantling and repairing; 5. Failure caused by water ingress or falling and Man-made mechanical damage; 6. Failure or damage caused by force majeure; 7. Counterfeit and shoddy products purchased through informal channels. Customer Service Information: Customer Name Contact address Contact number Product name Product model Purchase date Sellers S/N number Maintenance records Schematic diagram of product interface Wireless charging induced field 5 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an autlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement,This equipment should be installed and operated with a minumum distance of 20 cm between the radiator. PYS-WPC2…

Text truncated - open the document above for the full version.

SCS-F019:ConfidentialityRequestLetterPage 1 of 3 Rev7.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email:[email protected] Website:https://www.cps.bureauveritas.com/ Confidentiality RequestLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 AddingCFR2.459(obsolete)1.02.0August–11-2008 Updatedcompanytemplate&Addedtext box(obsolete) 2.03.0Jan-31-2012 AddedICconfidentialityletterform (obsolete) 3.04.0March-26-2015 CorrectionstoSTCform.Addedreference toKDB(obsolete) 4.05.0Nov-19-2015 Updatedcompanylogo(current)5.06.0Jun-26-2019 UpdatedReferencesandContactInfo6.07.0Aug-30-2020 SCS-F019:ConfidentialityRequestLetterPage 2 of 3 Rev7.0 PYSHigh-TechCo.,Ltd (2021-04-17) To: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046-1609 Cc: BureauVeritasConsumerProductsServicesInc. 775MontagueExpressway Milpitas,CA95035 Subject:ConfidentialityRequestforFCCID:2AU7DWPC20076-01 PursuanttoCFR47sections0.457and0.459,werespectfullyrequestpermanentconfidentialtreatmentofthe followingExhibitsaccompanyingthisapplicationbeheldconfidential: TypeofConfidentialityRequestedExhibit ShortTermPermanentBlockDiagram ShortTermExternalPhotos ShortTermPermanent i InternalPhotos ShortTermPermanentOperationalDescription/TheoryofOperation ShortTermPermanentPartsList ShortTermPermanentTune-UpProcedure ShortTermPermanentSchematics ShortTermTestSetupPhotos ShortTermPermanent i User’sManual Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic. Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovideunjustifiedbenefitstoits competitors. PermanentConfidentiality: Theapplicantrequeststheexhibitslistedaboveaspermanentlyconfidentialbepermanentlywithheldfrom publicreviewduetomaterialsthatcontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic. Short-TermConfidentiality: Toavoidprematurereleaseofsensitiveinformationpriortomarketingorreleaseoftheproducttothepublic,the applicantrequeststhefollowingdocumentscontainedinthiscertificationapplicationbetemporarilywithheld frompublicdisclosureforaninitialperiodof45or180days;orforaspecifieddateofnottoexceed 180daysfromtheGrantDate Theapplicantunderstandsthatdisclosureofthisapplicationandallaccompanyingdocumentationwillnotbe madebeforethedateoftheGrantforthisapplication. SCS-F019:ConfidentialityRequestLetterPage 3 of 3 Rev7.0 Sincerely, AlanXiang ElectronicsEngineer PYSHigh-TechCo.,Ltd 1F~12F,Block9,LianhuaIndustryZone,LongHua,Baoan,Shenzhen,P.R.China i PermanentconfidentialitymayberequestedinaccordancewithFCCKDB726920

PYSHigh-TechCo.,Ltd 2021/04/017 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD FCCID:2AU7DWPC20076-01 ToWhomItMayConcern: Thisletteristoascertainthat,Product:WirelesschargerM/N:PYS-WPC20076- 01hasbeentheunitsusedforconductingFCCcompliancetesting,anditmeets 680106D01RFExposureWirelessChargingAppv03Clause5(b)all6 conditions. 1Powertransferfrequencyislessthat1MHz Reply ： Yes,Powertransferfrequencyislessthat1MHz;Ans:EUToperating frequencyrangeis0.11~0.205MHz. 2Outputpowerfromeachprimarycoilislessthanorequalto15watts. Reply： Yes,Outputpowerfromeachprimarycoilis15watts.Themaxoutputpower is15W. 3Thetransfersystemincludesonlysingleprimaryandsecondarycoils.This includeschargingsystemsthatmayhavemultipleprimarycoilsandclients thatareabletodetectandallowcouplingonlybetweenindividualpairsof coils. Reply： Yes,Yes,TheEUThasonlyoneprimarycoil. 4Clientdeviceisplaceddirectlyincontactwiththetransmitter. Reply： Yes,Theclientdeviceneedstobeincontactwiththetransmitterbase,and thecontactdistanceislessthan10mm. 5 Mobileexposureconditionsonly(portableexposureconditionsarenot coveredbythisexclusion). Reply： Yes,EUTMeetsMobileexposureconditions. 6TheaggregateH-fieldstrengthsat15cmsurroundingthedeviceand20cm abovethetopsurfacefromallsimultaneoustransmittingcoilsare demonstratedtobelessthan50%oftheMPElimit. Reply： Yes,RFExposureEvaluationreporttestresultmeetsthisLimt.Pleaserefer totheRFexposureEvaluationreport. Ifyouhaveanyquestionorconcerns,pls.contactus. Sincerely, AlanXiang ElectronicsEngineer PYSHigh-TechCo.,Ltd 1F~12F,Block9,LianhuaIndustryZone,LongHua,Baoan,Shenzhen, P.R.China

0<X≤66<X≤3030<X≤80 80<X≤180 180<X≤320320<X≤600 >600 Tolerances unless otherwise mentioned Dimensions Approved By Checked By Designed By Date Description: Sheet 1 Of 1 Third Angle Projection Revised History Ord. Rev. Document No. Rev. Date Date Designed By/Date Checked By Approved By PYS High-Tech Co., Ltd 文件编号：QR-EG-075 版本号：E/0 Aaron.Hu 2020.06.24 Model:PYS-WPC20076-01 Input: 5V 3A 9V 2.22A Output: 15W Max Qi :15W/10W /7.5W/5W FCC ID: 2AU7DWPC20076-01 MADE IN CHINA Model:PYS-WPC20076-01 Input: 5V 3A 9V 2.22A Output: 15W Max Qi : 15W/10W /7.5W/5W MADE IN CHINA PYS High-Tech Co.,Ltd BOTTOM

ANT

1 / 20 EUTSpecification FCCID:2AU7DWPC20076-01 CharacteristicsDescription ProductNameWirelesscharger ModelnumberPYS-WPC20076-01 PowerSupplyAC120V/60Hzforadapter OperatingFrequency Range 110-205KHz Modulation Technique ASK AntennaTypeInductioncoil DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ Exposure classification Occupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure (S=1mW/cm2) AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity EvaluationappliedMPEEvaluation SAREvaluation ApplicableStandard: FCCPart1(1.1310),Part2(2.1091)andKDB680106D01RFExposure WirelessChargingAppsv03 ApplicableRequirement: ThreedifferentcategoriesoftransmittersaredefinedbytheFCCinOET Bulletin65. Thesecategoriesarefixedinstallation,mobile,andportableandare 2 / 20 definedasfollows: FixedInstallations:fixedlocationmeansthatthedevice,includingits antenna,isphysicallysecuredatapermanentlocationandisnotabletobe easilymovedtoanotherlocation.Additionally,distancetohumansfromthe antennaismaintainedtoatleast2meters. MobileDevices:amobiledeviceisdefinedasatransmittingdevice designedtobeusedinotherthanfixedlocationsandtobegenerallyusedin suchawaythataseparationdistanceofatleast20centimetersisnormally maintainedbetweenthetransmitter'sradiatingstructuresandthebodyofthe userornearbypersons.Transmittersdesignedtobeusedbyconsumersor workersthatcanbeeasilyre-located,suchasawirelessmodemoperatingina laptopcomputer,areconsideredmobiledevicesiftheymeetthe20centimeter separationrequirement.TheFCCrulesforevaluatingmobiledevicesforRF compliancearefoundin47CFR§2.1091. PortableDevices:aportabledeviceisdefinedasatransmittingdevice designedtobeusedsothattheradiatingstructure(s)ofthedeviceis/arewithin 20centimetersofthebodyoftheuser.Portabledevicerequirementsarefound inSection2.1093oftheFCC'sRules(47CFR§2.1093). TheFCCalsocategorizestheuseofthedeviceasbasedupontheuser’s awarenessandabilitytoexercisecontroloverhisorherexposure.Thetwo categoriesdefinedareOccupational/ControlledExposureandGeneral Population/UncontrolledExposure. Thesetwocategoriesaredefinedasfollows: Occupational/controlledexposurelimitsapplyinsituationsinwhich personsareexposedasaconsequenceoftheiremploymentprovidedthose personsarefullyawareofthepotentialforexposureandcanexercisecontrol overtheirexposure.Limitsforoccupational/controlledexposurealsoapplyin situationswhenapersonistransientthroughalocationwhere occupational/controlledlimitsapplyprovidedheorsheismadeawareofthe potentialforexposure.Thephrasefullyawareinthecontextofapplyingthese exposurelimitsmeansthatanexposedpersonhasreceivedwrittenand/or verbalinformationfullyexplainingthepotentialforRFexposureresultingfrom hisorheremployment.Withtheexceptionoftransientpersons,thisphrase alsomeansthatanexposedpersonhasreceivedappropriatetraining regardingworkpracticesrelatingtocontrollingormitigatinghisorher exposure.Suchtrainingisnotrequiredfortransientpersons,buttheymust receivewrittenand/orverbalinformationandnotification(forexample,using signs)concerningtheirexposurepotentialandappropriatemeansavailableto mitigatetheirexposure.Thephraseexercisecontrolmeansthatanexposed personisallowedtoandknowshowtoreduceoravoidexposureby administrativeorengineeringcontrolsandworkpractices,suchasuseof personalprotectiveequipmentortimeaveragingofexposure. Generalpopulation/uncontrolledexposurelimitsapplyinsituationsin whichthegeneralpublicmaybeexposed,orinwhichpersonswhoare 3 / 20 exposedasaconsequenceoftheiremploymentmaynotbefullyawareofthe potentialforexposureorcannotexercisecontrolovertheirexposure. Licenseesandapplicantsareresponsibleforcompliancewithboththe occupational/controlledexposurelimitsandthegeneral population/uncontrolledexposurelimitsastheyapplytotransmittersunder theirjurisdiction.Licenseesandapplicantsshouldbeawarethatthe occupational/controlledexposurelimitsapplyespeciallyinsituationswhere workersmayhaveaccesstoareasinverycloseproximitytoantennasand accesstothegeneralpublicmayberestricted. Inlieuofevaluationwiththegeneralpopulation/uncontrolledexposure limits,amateurlicenseesauthorizedunderpart97ofthischapterand membersofhisorherimmediatehouseholdmaybeevaluatedwithrespectto theoccupational/controlledexposurelimitsinthissection,provided appropriatetrainingandinformationhasbeenprovidedtotheamateur licenseeandmembersofhis/herhousehold.Othernearbypersonswhoare notmembersoftheamateurlicensee'shouseholdmustbeevaluatedwith respecttothegeneralpopulation/uncontrolledexposurelimits. TestSetupBlock 4 / 20 TestProcedure 1.ConnecttheEUTandequipmentasabovediagramoftestconfiguration. 2.EUTwasplacedonatable,andthemeasureprobewasplacedata measurementdistanceof15cmfromtheEUTtothecenteroftheprobe. 3.Poweronthemeasuringprobe,theEUTwassetatthemaximumfield strengthemissionstate. 4.TheEUTwasputindifferentdirections(Left,Right,Front,Rear,Topand Bottom)towardtothemeasureprobe.ThedistancefromthetopoftheEUTto theprobeis20CM,andthedistancefromotherdirectionsis15cm.Measure thevalueoffieldstrength. 5.Recordtheworstdataofthedifferentdirections. MeasuringDeviceAndTestEquipment UsedEquipmentManufacturerModelNo.SerialNo.LastCal.Cal.Interval  E-Field Probe(100kHz-3 GHz) NardaEP601611WX70311 November15, 2020 1Year  H-Field Probe(300KHz-3 0MHz) NardaELT-400M-0174August03,20201Year 5 / 20  BroadbandField Meter NardaELT-400M-0173August03,20201Year DescriptionofSupportDevice iPhone：Manufacturer:AppleInc. M/N:A1524 S/N:N/A WirelessChargerReceiver Module ：Manufacturer:Universal M/N:N/A S/N:N/A Adapter：Modelnumber:580245A087 Input:AC100-240V,50/60Hz SAMSUNGS9: Manufacturer:SAMSUNG M/N:SamsungGalaxyS9 S/N:N/A Xiaomi9 ：Manufacturer:Xiaomi M/N:Xiaomi9 S/N:N/A LimitsforMaximumPermissibleExposure(MPE) MeasurementResult Wepretestedfourmodes(maxload,midload,minload,Standby)forEUT.Theworstmode(max load)andworsttestfrequency(frequency：179KHz)testdataseethefollowing. 6 / 20 MagneticField(H-Field)strengthat15cmfromtheboundariesofEUT,and 20cmfromthetop. TestMode:WirelessCharging15wfor1%batt…

Text truncated - open the document above for the full version.

Report No.: EA21040120F02001 1 of 30 DongGuan Anci Electronic Technology Co., Ltd 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. Phone: 86-769- 8507 5888; Fax: 86-769- 8507 5898 E-mail: [email protected] Rev. 1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Wireless Charger Model No.: PYS-WPC20076-01 Trademark: PYS FCC ID: 2AU7DWPC20076-01 Report No.: EA21040120F02001 Issue Date: Apr. 20, 2021 Prepared for PYS High-Tech Co., Ltd 1F~12F, Block 9, Lianhua Industry Zone, LongHua, Baoan, Shenzhen, P.R.China Prepared by Dong Guan Anci Electronic Technology Co., Ltd. 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan, Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. This report shall not be reproduced, except in full, without the written approval of Dong Guan Anci Electronic Technology Co., Ltd. Report No.: EA21040120F02001 2 of 30 TRF No.: FCC 15.209/A Rev. 1.0 VERIFICATION OF COMPLIANCE Applicant: PYS High-Tech Co., Ltd 1F~12F, Block 9, Lianhua Industry Zone, LongHua, Baoan, Shenzhen, P.R.China Manufacturer: PYS High-Tech Co., Ltd 1F~12F, Block 9, Lianhua Industry Zone, LongHua, Baoan, Shenzhen, P.R.China Product Description: Wireless Charger Trade Mark: PYS Model Number: PYS-WPC20076-01 We hereby certify that: The above equipment was tested by Dong Guan Anci Electronic Technology Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.209(2020). Date of Test : Apr. 12, 2021 to Apr. 19, 2021 Prepared by : Tomas Yang/Supervisor Reviewer & Authorized Signer : Alan He/Manager Report No.: EA21040120F02001 3 of 30 TRF No.: FCC 15.209/A Rev. 1.0 Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / EA21040120F02001 Report No.: EA21040120F02001 4 of 30 TRF No.: FCC 15.209/A Rev. 1.0 Table of Contents 1 GENERAL INFORMATION .................................................................................................................................. 5 1.1 PRODUCT DESCRIPTION .................................................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT(S) ................................................................................................................. 6 1.3 TEST METHODOLOGY ........................................................................................................................................ 6 1.4 SPECIAL ACCESSORIES ..................................................................................................................................... 6 1.5 EQUIPMENT MODIFICATIONS ............................................................................................................................. 6 1.6 TEST FACILITY .................................................................................................................................................... 6 2 SYSTEM TEST CONFIGURATION ..................................................................................................................... 7 2.1 EUT CONFIGURATION ....................................................................................................................................... 7 2.2 EUT EXERCISE .................................................................................................................................................. 7 2.3 TEST PROCEDURE ............................................................................................................................................. 7 2.4 CONFIGURATION OF TESTED SYSTEM ............................................................................................................... 8 3 SUMMARY OF TEST RESULTS ......................................................................................................................... 8 4 TEST SYSTEM UNCERTAINTY .......................................................................................................................... 9 5 CONDUCTED EMISSIONS TEST ..................................................................................................................... 10 5.1 MEASUREMENT PROCEDURE .......................................................................................................................... 10 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................................. 10 5.3 MEASUREMENT EQUIPMENT USED .................................................................................................................. 10 5.4 CONDUCTED EMISSION LIMIT .......................................................................................................................... 10 5.5 MEASUREMENT RESULT .................................................................................................................................. 11 5.6 CONDUCTED MEASUREMENT PHOTO .............................................................................................................. 14 6 RADIATED EMISSION TEST............................................................................................................................. 15 6.1 MEASUREMENT PROCEDURE .......................................................................................................................... 15 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................................. 15 6.3 MEASUREMENT EQUIPMENT USED ........................................................…

Text truncated - open the document above for the full version.

Close-upphoto