2AUB7-BEBTWSSS0012 in 1 Speaker

2 in 1 speaker User Manual Audio + headphones (2 in 1 ) Please read the manaualcarefully and declare properly before using the product Audio operation manual 1. Instruction for use O :Press the button to turn on/off + :Play or pause,Answer a phone call/End the phone call — : Next song [Volume up PM : In the link state, click Pause/Play, and double-click to make a call M : Mode switch *Bluetooth Mode *Radio Mode TF: TF card port AUX: AUX port USB: USB port Micro port: Micro charging port 2. WireIess connection: 1)Turn on the audio switch, turn on the Bluetooth mode, search and find the BEBTWSS001 pairing link. Then connect. If you want to connect to a new device, first disconnect the paired device and pair it. 2)Wireless play After the wireless connection is successful, briefly press the button "play / pause music". Press + to select the previous song. Press - to select the next song. 3) Volume up / down While playing, long press - to reduce the volume. When playing, long press + to increase the volume level. 4)Mode switch M Short press m to switch Bluetooth mode / radio mode Hands free call Answer / end the call: press the pause button, refuse to listen to the call, and long press the pause button for 2 seconds. 6) Tf: when inserting the rear TF card, the system will automatically enter the TF mode for operation. 7) Usb: after inserting USB, the system will automatically enter USB mode. 3.Specification parameters model BEBTWSSS001 Bluetooth version Bluetooth V5.1 Pairing name BEBTWSSS001 Bluetooth receiving distance Straight line barrier free not less than 10 meters input voltage DC 5V Headset charging time About 1.5 hours Charging time of char In box About 3 hours Automatic shutdown time Not connected within 10 minutes Charging times of headphones by charging box About 6-7 times 4.Warnings and precautions during product use 1.Do not use abrasive detergent to clean this product. 2.Do not let this product be heated or close to a fire source, such as a cooking stove. 3.Do not let this product be directly exposed to sunlight for a long time. 4.Do not discard this product in the fire to avoid explosion. 5.Do not try to disassemble this product to make any modifications, 6.If you do not intend to use this product for a long time, please store it in a dry environment, And char e the stereo at least once a month to extend its service li e and avoid extreme temperature and dust. Earphone operation manual This product is a new Bluetooth wireless product with audio and headset combined as one It provides more portable and comprehensive services for customers and friends And experience. Parameters and configuration Wireless connection(tws)Realize wireless stereo sound, Left and right channel separation. Bluetooth on the left and right headphones Can be used alone, It can also be used in one pair Bluetooth version: BT5.3 Operating mode: Touch control Frequency response range: 20Hz-20KHz Bluetooth distance: IOM Endurance: 3-4hours Charging time of charging box: Sensitivity: 106db SPL±3dB Bluetooth connectivity Pair with the mobile phone for the first time. When the mobile phone is turned on, take out the headset from the charging bin. Search for the corresponding device namein the Bluetooth of the mobile phone, and then connect it. Note: the call supports two earphones,playback or pause, which can be controlled by any earphone button connected with Bluetooth. The other earphone will be controlled synchronously, and can be connected back automatically the next time it is turned on Headphone touch function description Key: open and take out the headset for pairing 1. The red and blue light of Bluetooth connection flashes, and the red and blue light goes out after successful connection 2. Next song: double click left and right, previous song: three hits left and right 3.Click the left and right ears to answer the call in the incoming state 4.Double click the left and right ears to hang up in the call state 5. Press and hold for two seconds to reject the call in the incoming state 6. The red light of headset charging is on for a long time, and the red light of full charge is off Warm tip: in order to prevent the headset from automatically turning on the Bluetooth mode, it is recommended that you turn off the Bluetooth device when not using the headset, so as not to waste the power of the headset and the device FCCWarningStatement Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidthe user’sauthoritytooperatetheequipment.Thisequipmenthas beentestedandfoundto complywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsa redesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation.Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinst alledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular installation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whic hcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto correcttheinterferencebyoneormoreofthefollowingmeasures: ‐‐Reorient orrelocatethereceivingantenna. Inc‐‐reasetheseparationbetweentheequipmentand receiver. ‐‐Connecttheequipment intoan outlet ona circuit differentfromthat towhich thereceiveris connected. ‐‐Consultthe dealeroranexperiencedradio/TV technicianfor help. Thisdevice complieswithpart 15 oftheFCCRules. Operation issubjectto thefollowing twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and (2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundes iredoperation. The device has been evaluated to meet general RF exposure requirement. Thedevice can be used in portable exposure condition without restriction.

Shenzhen BEB Electronics CO., Limited 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen BEB Electronics CO., Limited Address: Xinhuiteng Technology Park, Baoan District, Shenzhen, 518102, Guangdong, China Product Name: 2 in 1 Speaker FCC ID: 2AUB7-BEBTWSSS001 Model(s): BEBTWSSS001 2.911(d)(5)(i) Equipment Type We, [Shenzhen BEB Electronics CO., Limited] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Mia Wang Date: Aug. 25, 2023 Signature: Title and Company name: CEO / Shenzhen BEB Electronics CO., Limited NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen BEB Electronics CO., Limited 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen BEB Electronics CO., Limited Address: Xinhuiteng Technology Park, Baoan District, Shenzhen, 518102, Guangdong, China Product Name: 2 in 1 Speaker FCC ID: 2AUB7-BEBTWSSS001 Model(s): BEBTWSSS001 2.911(d)(5)(ii) Applicant filing We, [Shenzhen BEB Electronics CO., Limited] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Mia Wang Date: Aug. 25, 2023 Signature: Title and Company name: CEO / Shenzhen BEB Electronics CO., Limited NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenBEBElectronicsCO.,Limited 2.911(d)(7)USAAgentv1.4 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:ShenzhenBEBElectronicsCO.,Limited Address:XinhuitengTechnologyPark,BaoanDistrict,Shenzhen,518102, Guangdong,China ProductName:2in1Speaker FCCID:2AUB7-BEBTWSSS001 Model(s):BEBTWSSS001 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[ShenzhenBEBElectronicsCO.,Limited](“theapplicant”)designate[Startek Enterprises,LLC] NOTE1 forthepurposeofacceptingserviceofprocessonbehalfofthe applicant. Applicantconsent:Weacknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherwethegranteehavepermanently terminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S., orattheconclusionofanyCommission-relatedadministrativeorjudicialproceeding involvingtheequipment,whicheverislater. Agentobligation:Weacknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,orattheconclusionofanyCommission-relatedadministrativeor judicialproceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:StartekEnterprises,LLC USAAddress:807ShotgunRd,Sunrise,FL 33326,Florida,USA FRNNumber:0033402017 ContactName:MrVictorDiaz TelephoneNo:19544724320 Email:[email protected] Applicant Companyname:ShenzhenBEB ElectronicsCO.,Limited Address:XinhuitengTechnologyPark, BaoanDistrict,Shenzhen,518102, Guangdong,China FCCGranteeCode:2AUB7 ContactName:MiaWang TelephoneNo:0755-36872735 Email:[email protected] ShenzhenBEBElectronicsCO.,Limited 2.911(d)(7)USAAgentv1.4 Signature: Title:manager Signature: Title:CEO Date:August25 th ,2023Date:August25th,2023 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

S Co m Ad d Chin Pr o Mo d Pr o We act We an d issu our Sig Na m Title Com henz mpany: She dress: Xinh na oduct Name del Numbe oduct Desc authorize M on our beha declare tha d certificatio ues concern behalf shal nature: me: e: mpany: zhen B enzhen BEB huiteng Tech e: 2 in 1 Sp er(s): BEBT ription: 2 in MiCOM Lab alf on all ma at MiCOM L n of equipm ning the app ll have the s Mia Wan g CEO Shenzhen BEB Agen B Electronic hnology Pa eake r TWSSS001 n 1 Speake bs Inc., 575 atters conce Labs Inc. is ment to the r proval applic same effect g n BEB Elec Elect nt Auth cs CO., Lim rk, Baoan D r Boulder C o erning the c allowed to f regulatory a cation. Any t as acts of ctronics CO tronic horizat mited District, She ourt, Pleasa certification forward all i agencies as and all acts our own. O., Limited cs CO tion enzhen, 518 anton, Califo of above na information s required a s carried ou Date: O., Lim 8102, Guan ornia 94566 amed equip related to t nd to discu ut by MiCOM Aug. 25, 2 mited gdong, 6, USA, to pment. the approva ss any M Labs on 2023 d al

Shenzhen BEB Electronics CO., Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Aug. 25, 2023 Subject; Request for Confidentiality FCC ID: 2AUB7-BEBTWSSS001 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software security requirement In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Mia Wang Title: CEO

Annex A External Photos Report No.: HK2308163705-E Page 1 of 5 Report No.: HK2308163705-E Page 2 of 5 Report No.: HK2308163705-E Page 3 of 5 Report No.: HK2308163705-E Page 4 of 5 Report No.: HK2308163705-E Page 5 of 5

FCC ID LABEL: Ca: 3mm x 10mm Label Location FCC ID: 2AUB7-BEBTWSSS001

Annex B Internal Photos Report No.: HK2308163705-E Page 1 of 4 Report No.: HK2308163705-E Page 2 of 4 Report No.: HK2308163705-E Page 3 of 4 Antenna Report No.: HK2308163705-E Page 4 of 4

FCC RF Exposure Product Name: 2 in 1 Speaker FCC ID: 2AUB7‐BEBTWSSS001 Model(s): BEBTWSSS001 1. Limits According to KDB 447498 D01 General RF Exposure Guidance v06 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)]·[√ f(GHz)]≤3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, Where: Result=P/D*√F F= the RF channel transmit frequency in GHz P=Maximum turn‐up power in mw D=Min. test separation distance in mm 2. Test Result of RF Exposure Evaluation Frequency (MHz) Output power (dBm) Tune Up Power (dBm) Max Tune Up power dBm/mW Min test separatio n distance mm Result Limit (mW/cm 2 ) SAR Test Exclusion 2402 ‐2.25 ‐2±1 ‐1/0.79 5 0.245 3.0 Pass Note: PK Output power= conducted power. Conducted power see the test report HK2308163705‐E, antenna gain=3.35dBi Per KDB 447498 D01, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.245 which is<= 3, RF Exposure testing is not required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f (GHz)] f(GHz) is the RF channel transmit frequency in GHz Distance=5mm

2.4GHz1608ChipAntenna:RANT1608F245C01 _ Application: WLAN,802.11b/g,Bluetooth,WLAN,etc... Features SMD,highreliability,ultraImpact,Omni-directional... PartnumberInformation RANT1608F245C01 (A)(B)(C)(D)(E)(F) ElectricalSpecification ThespecificationisdefinedonEVB. DimensionandTerminalConfiguration No.TerminalName 1Feeding/GNG 2GND/Feeding (A)ProductTypeChipAntenna (B)SizeCode 1.6x0.8mm( ± 0.1mm) (C)MaterialHighKmaterial (D)Frequency2.4~2.5GHz (E)FeedingmodePIFA&SingleFeeding (F)AntennatypeType=01 WorkingFrequencyRange2400~2500MHz Bandwidth120MHz(Min.) PeakGain3.35dBi(Typ.) Impedance50Ohm Returnloss10dB(Min) PolarizationLinear AzimuthBeamwidthOmni-directional OperationTemperature(°C)-40~85°C ResistancetoSolderingHeats 10sec.(@280°C) TerminationNi/Au(Leadless) Dimension(mm) L 1.60±0.10 W 0.80±0.10 T 0.80±0.10 咏成國際科技有限公司電話 :13530576606 RAINInternationalTechnologyCo.,Ltd. TEL:13530576606 2.4GHz1608ChipAntenna:RANT1608F245C01 _ 1 EvaluationBoardReference PCBDimensionAntennaLayoutReference Unit:mm ElectricalCharacteristics ReturnLoss&Radiation ELECTRICALCHARACTERISTICSS11 Radiation ElectricalCharacteristics 2.4GHz1608ChipAntenna:RANT1608F245C01 _ TapingSpecifications ReelandTapingSpecification ReelSpecification TYPESIZEABCD 16087”4K/Reel 4.0±0.5 4.0±213.5±0.5178±2 TappingSpecification PackagingTypeABWEFGHTψDP PaperType1608 1.90±0.203.50±0.208.0±0.201.75±0.103.5±0.054.0±0.102.0±0.050.75±0.10 1.50±0.10 4.0±0.1 2.4GHz1608ChipAntenna:RANT1608F245C01 _ ReliabilityTable TestItemProcedure Requirements CeramicType Remark (Reference) Electrical Characterization Fulfilltheelectrical specification UserSpec. Thermal Shock 1.Preconditioning: 50±10°C/1hr,thenkeepfor24±1hrsatroomtemp. 2.Initialmeasure:Spec:referInitialspec. 3.Rapidchangeoftemperaturetest: -30°Cto+85°C;100cycles; 15minutesatLowercategorytemperature; 15minutesatUppercategorytemperature. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 107 Temperature Cycling 1.Initialmeasure:Spec:referInitialspec. 2.100Cycles(-30°Cto+85°C),SoakMode=1(2Cycle/hours). 3.Measurementat24±2Hoursaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. JESD22 JA104 HighTemperature Exposure 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered;500hours@T=+85°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 LowTemperature Storage 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered:500hours@T=-30°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 Solderability (SMDBottomSide) Dippingmethod: a.Temperature:235±5°C b.Dippingtime:3±0.5s Thesoldershouldcover over95%ofthecritical areaofbottomside. IEC60384-21/22 4.10 SolderingHeat Resistance (RSH) Preheatingtemperature:150±10°C. Preheatingtime:1~2min. Soldertemperature:260±5°C. Dippingtime:5±0.5s NoVisibleDamage.IEC60384-21/22 4.10 Vibration5g'sfor20min.,12cycleseachof3orientations Note:Use8"X5"PCB.031"thick7securepointson,onelong sideand2securepointsatcornersofoppositesides.Parts mountedwithin2"fromanysecurepoint.Testfrom10-2000 Hz. NoVisibleDamage.MIL-STD-202 Method204 Mechanical Shock Threeshocksineachdirectionshallbeappliedalongthethree mutuallyperpendicularaxesofthetestspecimen(18shocks) Peakvalue:1,500g’s Duration:0.5ms Velocitychange:15.4ft/s Waveform:Half-sine NoVisibleDamage.MIL-STD-202 Method213 Humidity Bias 1.Humidity:85%R.H.,Temperature:85±2°C. 2.Time:500±24hours. 3.Measurementat24±2hrsaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 Method106 2.4GHz3216ChipAntenna:RANT1608F245C01 _ Board Flex (SMD) 1.Mountingmethod: IR-Reflow.PCBSize(L:100×W:40×T:1.6mm) 2.Applytheloadindirectionofthearrowuntilbendingreaches 2mm. NoVisibleDamage.AEC-Q200 005 AdhesionForceof1.8Kgfor60seconds.NoVisibleDamage Magnificationof20Xor greatermaybeemployed forinspectionofthe mechanicalintegrityofthe devicebodyterminalsand body/terminaljunction. AEC-Q200 006 Physical Dimension Anyapplicablemethodusingx10magnification,micrometers, calipers,gauges,contourprojectors,orothermeasuring equipment,capableofdeterminingtheactualspecimen dimensions. Inaccordancewith specification. JESD22 JB100 RevisionHistory RevisionDateContent 12019/03/01NewDatasheet 22020/02/22Add2Dradiationcharacteristic

Page 1 of 48 Report No.: HK2308163705-E FCC Test Report FCC PART 15 SUBPART C 15.247 Test Report On Behalf of Shenzhen BEB Electronics CO., Limited For 2 in 1 Speaker Model No.: BEBTWSSS001 FCC ID: 2AUB7-BEBTWSSS001 Prepared For: Shenzhen BEB Electronics CO., Limited Xinhuiteng Technology Park, Baoan District, Shenzhen, 518102, Guangdong, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Aug. 16, 2023 ~ Aug. 24, 2023 Date of Report: Aug. 24, 2023 Report Number: HK2308163705-E Page 2 of 48 Report No.: HK2308163705-E Test Result Certification Applicant’s Name .................. : Shenzhen BEB Electronics CO., Limited Address .................................. : Xinhuiteng Technology Park, Baoan District, Shenzhen, 518102, Guangdong, China Manufacture's Name ............. : Shenzhen BEB Electronics CO., Limited Address .................................. : Xinhuiteng Technology Park, Baoan District, Shenzhen, 518102, Guangdong, China Product Description Trade Mark ............................. : N/A Product Name ........................... : 2 in 1 Speaker Model and/or type reference...: BEBTWSSS001 Standards .............................. : 47 CFR FCC Part 15 Subpart C 15.247 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of Performance of Tests ............ : Aug. 16, 2023 ~ Aug. 24, 2023 Date of Issue ........................................... : Aug. 24, 2023 Test Result ............................................... : Pass Prepared by: Project Engineer Reviewed by: Project Supervisor Approved by: Technical Director Page 3 of 48 Report No.: HK2308163705-E Table of Contents Page 1. Summary .............................................................................................................................................................. 5 1.1. Test Standards ......................................................................................................................................................... 5 1.2. Test Description ....................................................................................................................................................... 5 1.3. Information of the Test Laboratory ......................................................................................................................... 6 1.4. Statement of the Measurement Uncertainty .......................................................................................................... 6 2. General Information ............................................................................................................................................. 7 2.1. Environmental Conditions ....................................................................................................................................... 7 2.2. General Description of EUT ..................................................................................................................................... 7 2.3. Description of Test Modes and Test Frequency ....................................................................................................... 8 2.4. Equipments Used during the Test ............................................................................................................................ 9 2.5. Related Submittal(s) / Grant (s) ............................................................................................................................. 10 2.6. Modifications ........................................................................................................................................................ 10 2.7. Description of Test Setup ....................................................................................................................................... 10 2.8. Description of Support Units ................................................................................................................................. 11 3. Test Conditions and Results ................................................................................................................................. 12 3.1. Conducted Emissions Test ..................................................................................................................................... 12 3.2. Radiated Emissions and Band Edge ....................................................................................................................... 15 3.3. Maximum Peak Conducted Output Power ............................................................................................................ 26 3.4. 20dB Bandwidth .................................................................................................................................................... 27 3.5. Frequency Separation ........................................................................................................................................... 30 3.6. Number of Hopping Frequency ............................................................................................................................. 32 3.7. Time of Occupancy (Dwell Time) .......................................................................................................................... 34 3.8. Out‐of‐Band Emissions .................................................................................................................…

Text truncated - open the document above for the full version.

BEBTWSSS001 Radiated Emission Conducted Emission