2AUCY-V1935Mobile Phone

Bienvenido a vivo This Quick Start Guide tells you how to set up your phone and use its key features. For more detailed instructions, turn on your phone, then go to Settings > About phone > Customer service > Manual. You can also learn more useful information on vivo's official website. For legal information, go to Settings > About phone > Legal information. For the FCC ID of this phone, please go to "Settings > About phone > FCC ID". The features and images shown in this guide are for reference only. They may differ from the actual product. Appearance Front camera Volume button Power button Pin port Card tray Receiver Ambient light sensor &Proximity sensor (Hidden hole) Microphone Speaker USB port Rear camera Rear flash Fingerprint sensor Special Instructions Ambient Light Sensor & Proximity Sensor The ambient light sensor and proximity sensor of this device are hidden on the right side of the receiver. To ensure the sensors function well, please keep them away from any dust, grease or light-proof film. Using a third-party screen protector may cause the sensors blocking alert or locked screen nonresponsive to incoming calls, so you need to cut the film to expose the sensors. Earphone jack Product Technical Specifications 162.04 × 76.46 × 9.11mm Product model Product name Camera Battery Dimensions Mobile phone vivo 1935 Optimum operating temperature is 0°C to 35°C and optimum storage temperature is -20°C to 45°C. Extreme heat or cold may damage your device or accessories. Screen 50 ()00mAhTYP 16.58cm (6.53) 2340 × 1080 Front: 16MP Rear: 13MP +8MP+2MP+2MP Product Standard Accessories Cell phone x 1 Charger x 1 Headset x 1 USB cable x 1 Pin x 1 Warranty card x 1 Quick start guide x 1 Phone case x 1 metal and positions the device a minimum of 15mm from the Unlicensed transmitter Class B digital device or peripheral This device complies with part 15 of the FCC Rules .Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information to user Caution: Changes or modifications not expressly approved by the vivo Mobile Communication Co.,Ltd. could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Consult the dealer or an experienced radio/TV technician for help. SAR statement This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. FCC SAR Head ：W/kg Body-worn：W/kg（15mm distance） Hotspot：W/kg（10mm distance） such body-worn accessory should be avoided. Accessory available in market and must be used to keep use distance 15mm from EUT to body-worn operation. vivo 1935 Quick Start Guide Please read this Quick Start Guide before using your phone, and keep it for future reference. 1.171 0.607 1.086

vivo Mobile Communication Co., Ltd. Agent Authorization Company: vivo Mobile Communication Co., Ltd. Address: #283, BBK Road, Wusha, Chang'An, DongGuan, China Product Name: Mobile Phone Model Number(s): vivo 1935 Product Description: Smart Phone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jun. 01, 2020 Name: Jianfeng Xiang Title: Certification Engineer Company: vivo Mobile Communication Co., Ltd.

vivoMobileCommunicationCo.,Ltd. Date:27May27,2020 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 ToWhomItMayConcern: ThevivoMobileCommunicationCo.,Ltd.theundersigned,herebyauthorizesMr.WuXuewen fromShenzhenBALUNTechnologyCo.,Ltd.,toactonthebehalfofthevivoMobile CommunicationCo.,Ltd.solelyinmattersrelatingtotheapplicationforanFCCequipment authorizationforFCCID:2AUCY-V1935includingthesigningofdocumentsinconnectionwith thisApplication.NecessaryactscarriedoutbyShenzhenBALUNTechnologyCo.,Ltd.in connectionwiththeApplicationshallhavethesameeffectasactsofthevivoMobile CommunicationCo.,Ltd. ThevivoMobileCommunicationCo.,Ltd.alsoherebycertifythatnopartytothisapplicationis subjecttoadenialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-Drug AbuseActof1988,21U.S.C.Section862. YoursSincerely, Printname:XiangJianfeng Title:CertificationEngineer vivoMobileCommunicationCo.,Ltd.

vivoMobileCommunicationCo.,Ltd. Date:May27,2020 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 RE:vivoMobileCommunicationCo.,Ltd. FCCID: 2AUCY-V1935 FCCCertificationConfidentialityRequest Gentlemen: Thisletteristocomplywith47CFR0.457and0.459pertainingtoconfidentialitymaterial.vivo MobileCommunicationCo.,Ltd.requeststhatthefollowingdocumentsregardingthissubmission forFCCID:2AUCY-V1935bekeptLong-Termconfidential: ExhibitTypeFileName BlockDiagramBlockDiagram.pdf SchematicsSchematics.pdf OperationalDescriptionOperationalDescription.pdf PartlistBOM.pdf Tune-Up-Procedure softwaresecurityinformation Tuneupprocedure.pdf softwaresecurityinformation.pdf Andbelowexhibitkeptshort-termconfidential(180days): ExhibitTypeFileName ExternalPhotosExternalPhoto.pdf InternalPhotosInternalPhoto.pdf TestSetupPhotosTestSetupPhotos.pdf UsersManualsUsersManual.pdf Thosedocumentscontaindetailedsystemandequipmentdescriptionandrelatedinformation abouttheproductwhichvivoMobileCommunicationCo.,Ltd.considerstobeconfidential proprietary,acustomdesignand,otherwise,notreleasabletothegeneralpublic.Sincethisdesign isabasisformwhichfuturetechnologicalproductswillevolve,vivoMobileCommunicationCo., Ltd.considersthisinformationwouldbeofbenefittoitscompetitors,andthatthedisclosureof theinformationinthesedocumentswouldgivecompetitorsanunfairadvantageinthemarket. Thankyouforyourattentiontothismatter. YoursSincerely, Printname:XiangJianfeng Title:CertificationEngineer vivoMobileCommunicationCo.,Ltd.

Annex No.: BL-SZ2040775-AW 1 / 7 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Annex No.: BL-SZ2040775-AW 2 / 7 LEFT SIDE VIEW OF EUT RIGHT SIDE OF EUT Annex No.: BL-SZ2040775-AW 3 / 7 TOP VIEW OF EUT c BOTTOM VIEW OF EUT Annex No.: BL-SZ2040775-AW 4 / 7 Accessory-Power Adapter (V1020D-US US Plug, Manufacturer: Phitek) CLOSE-UP Annex No.: BL-SZ2040775-AW 5 / 7 Accessory-Power Adapter (V1020D-US US Plug, Manufacturer: Salcomp) CLOSE-UP Annex No.: BL-SZ2040775-AW 6 / 7 Accessory-Power Adapter (V1020D-US EU Plug, Manufacturer: Aohai) CLOSE-UP Annex No.: BL-SZ2040775-AW 7 / 7 Accessory-USB Cable Accessory-Earphone

vivoMobileCommunicationCo.,Ltd. Date:June1,2020 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Subject:LabelStatementFCCID:2AUCY-V1935 Subject:LabelStatement FCCID:2AUCY-V1935 ToWhomitMayConcern WeherebyprovidethefollowingattestationsaccordingtoCFR2.935andFCCKDB784748D02: Atthetimeofpurchase,theFCCIDisreadilyandphysicallyvisibletothepurchaserontheexterior packageperCFR2.935(f).TheFCCIDwillbereadilylegiblewithouttheaidofmagnification accordingtoCFR2.935(d).Theliteratureinthepackagedescribeshowtoaccesstheelectronic displaytofindtheFCCIDperCFR2.935(b)andFCCKDB784748.PerCFR2.935(c),theuserwillbe abletoaccessthisinformationwithinamaximumof3steps.Theuserwillbeabletoaccessthis informationwithoutaSIMcard,specialaccessoriesorsupplementalplug-ins.PerCFR2.935(e), We,vivohaveprogrammedthee-labelanditisnotabletobemodifiedbyanythirdparty. PerCFR2.935(f),theFCCIDwillbeabletosurvivenormalshippingandhandlingsoitisvisiblefor inspectionatthetimeofimport. Shouldyouhaveanyquestionsorcommentsconcerningtheabove,pleasecontactthe undersigned. YoursSincerely, Printname:XiangJianfeng Title:CertificationEngineer vivoMobileCommunicationCo.,Ltd.

FCCE–LabelInformation Model：vivo1935 A.Informationtobedisplayed Theinformationthatwillbedisplayedonthee-labelandinformationthatwill remainintheusermanualisshownbelow: InformationOnE-labelInManual FCCIDnumberYesNo DoclogoNoNo 15.19statement("Thisdevicecomplies withpart15oftheFCCRules.Operationis subjecttothefollowingtwo conditions:(1)Thisdevicemaynotcause harmfulinterference,and(2)thisdevice mustacceptanyinterference received,includinginterferencethatmay causeundesiredoperation.") NoYes ClassA/BDigitalDeviceusermanual statement NoYes DocdeclarationNoNo Cautiontotheuserthatchangesor modificationsnotexpresslyapprovedby thepartyresponsibleforcompliance couldvoidtheuser"sauthoritytooperate theequipment NoYes DescribeanyotherFCCregulatory informationincludedine-label Ifthee-labelincludesinformationtypicallyincludedinthemanualthenthee-labelshallclearly differentiatebetweeninformationrequiredtobeonthedevice’ssurfaceandinformation requiredtobeinthemanual--referto784748D02elabellingv01sectionIID3(b） Imagesofthee-labelscreenareprovidedbelow: vivo1935 FCCID:2AUCY-V1935 B.Accesstotherequiredinformationonthee-label 1.Usersareabletoaccesstheinformationinnomorethanthreestepsinadevice＇s menu.Theactualstepsare: TOaccessthee-labelinformation,inthedevice, Choose:settings＞Aboutphone＞FCCID Nospecialaccesscodesorpermissionsarerequiredtogothroughtheabovesteps beyondenteringauser-definedpasswordtoprotectagainstunauthorizedaccessto thedevice 2.Theinformationisstoredonthedevice,nospecialaccessoriesorsupplemental plug-ins(e.g.,aSIM/USIMcard)arerequiredtoaccesstheinformation. YES 3.Usersareprovidedspecificinstructionsonhowtoaccesstheinformation. ThisquickstartguideisinthephoneboxtoProvideinformationalinstructionsto users. C.LabelingforImportationandpurchasing 1.Productsutilizinge-labelsarerequiredtohaveaphysicalontheproductatthetime ofimportation,marketingandsales.Fordevicesimportedinbulkandnotpackaged individually,aremovableadhesivelabelor,fordevicesinprotectivebags,slabelonthe bagsisacceptableforthispurpose.Anyremovablelabelshallbeofatypeintendedto survivenormalshippingandhandlingandmustonlyberemovedbythecustomer afterpurchase,Fordevicesimportedalreadyinindividualpackagesreadyforsale,the informationmayalternativelybeprovidedonthepackage.Itshallcontain: 1.TheFCCIDand/ortheDoclogo(ifapplicable): 2.Anyotherinformationrequiredbyspecificruletobeprovidedonthesurfaceofthe productunlesssuchinformationispermittedtobeincludedintheUser＇smanualor otherpackaginginserts. FCCIDandmodelarepresetonthepackagingbagofthedevice D.Otherconsiderations 1.Theaboveinformationmustbeprogrammedbytheresponsiblepartyandthe informationmustbesecuredinsuchamannerthatthird-partiescannotmodifyit. Thee-labelinformationispre-programmedbythegrantee.Theusercannotmodify thee-labelinformation Yes,itisprovided.

Annex No.: BL-SZ2040775-AI 1 / 6 EUT INTERNAL PHOTOS EUT UNCOVER VIEW EUT UNCOVER VIEW BT/WIFI/GPS Antenna 2/3/4G Antenna 2/3/4G Antenna Annex No.: BL-SZ2040775-AI 2 / 6 EUT UNCOVER VIEW MAIN BOARD TOP VIEW (WITH SHIELDING) Annex No.: BL-SZ2040775-AI 3 / 6 MAIN BOARD REAR VIEW (WITH SHIELDING) MAIN BOARD TOP VIEW (WITHOUT SHIELDING) Annex No.: BL-SZ2040775-AI 4 / 6 MAIN BOARD REAR VIEW (WITHOUT SHIELDING) SUB BOARD TOP VIEW (WITH SHIELDING) RF Chip Annex No.: BL-SZ2040775-AI 5 / 6 SUB BOARD TOP VIEW (WITHOUT SHIELDING) SUB BOARD REAR VIEW Annex No.: BL-SZ2040775-AI 6 / 6 Battery Photo (FRONT) Battery Photo (REAR)

Report No.: BL-SZ2040775-701 2 / 250 Revision History VersionIssue DateRevisions Content Rev. 01Jun. 01, 2020Initial Issue TABLE OF CONTENTS 1 ADMINSTRATIVE DATA (GENERAL INFORMATION)....................................................................................5 1.1Identification of the Testing Laboratory.................................................................................................5 1.2Identification of the Responsible Testing Location..............................................................................5 1.3Test Environment Condition .................................................................................................................... 5 1.4Announce ................................................................................................................................................... 6 2 PRODUCT INFORMATION...................................................................................................................................7 2.1Applicant Information...............................................................................................................................7 2.2Manufacturer Information........................................................................................................................7 2.3Factory Information..................................................................................................................................7 2.4General Description for Equipment under Test (EUT) ........................................................................ 7 2.5Ancillary Equipment .................................................................................................................................. 7 2.6Technical Information ............................................................................................................................... 8 2.7Power Reduction Description...............................................................................................................10 3 SUMMARY OF TEST RESULTS........................................................................................................................15 3.1Test Standards ........................................................................................................................................ 15 3.2Device Category and SAR Limit..........................................................................................................16 3.3Test Result Summary ............................................................................................................................ 17 3.4Test Uncertainty ...................................................................................................................................... 18 4 SAR MEASUREMENT SYSTEM........................................................................................................................20 4.1Definition of Specific Absorption Rate (SAR).....................................................................................20 4.2SATIMO SAR System............................................................................................................................20 5 SYSTEM VERIFICATION....................................................................................................................................29 5.1Antenna Port Test Requirement .......................................................................................................... 29 5.2Purpose of System Check....................................................................................................................29 5.3System Check Setup.............................................................................................................................29 6 EUT TEST POSITION CONFIGURATUONS...................................................................................................30 Report No.: BL-SZ2040775-701 3 / 250 6.1Head Exposure Conditions...................................................................................................................30 6.2Body-worn Position Conditions............................................................................................................32 6.3Hotspot Mode Exposure Position Conditions....................................................................................33 6.4Product Specific 10g Exposure Consideration .................................................................................. 33 7 SAR MEASUREMENT PROCEDURES ............................................................................................................ 34 7.1SAR Measurement Process Diagram.................................................................................................34 7.2SAR Scan General Requirements.......................................................................................................35 7.3SAR Measurement Procedure.............................................................................................................36 7.4Area & Zoom Scan Procedures...........................................................................................................36 8 CONDUCTED RF OUPUT POWER .................................................................................................................. 37 8.1GSM..........................................................................................................................................................37 8.2WCDMA ................................................................................................................................................... 38 8.3CDMA.......................................................................................................................................................38 8.4LTE........................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2040775-701 CALIBRATION REPORT F.1 E-Field Probe Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 F.2 835 MHz Dipole Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 F.3 1800 MHz Dipole Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 F.4 1900 MHz Dipole Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 F.5 2450 MHz Dipole Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701 Report No.: BL-SZ2040775-701

Tested by: Approved by: ~~-+~-+------ Liao Jianming (Technical Director) Shenzhen BALUN Technology Co., Ltd. FOR Validation Dipoles &Waveguide LW-SZ2030763 SAR Validation Dipole and Wayeguide DIP 08750-446, DIP 08835-447 DIP 08900-448, DIP 18800-449 DIP 18900-450, DIP 28000-451 DIP 28450-452, DIP 28600-453 SW85500-W8A 42 SATIMO Pass Mar. 18, 2020 -Mar. 20, 2020 N OTE: This test report can be duplicated completely for the legal use with the approval of the applicant; it shall not be reproduced except in full, without the written approval of Shenzhen BALUN Technology Co., Ltd. BALUN Laboratory. Any objections should be raised within thirty days from the date of issue. To validate the report, please visit BALUN website. Block B, I st FL,Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong, P. R. China 518055 TEL: +86-755-668501 00, FAX: +86-755-61824271 Email: [email protected] www.baluntek.com 2/25 1GENERALINFORMATION 1.1Introduction ThisdocumentcontainsasummaryoftherequirementssetforthbytheIEEE1528,FCCKDB865664 D01forreferencedipolesusedforSARmeasurementsystemvalidations.Insteadofthetypicalannual calibrationrecommendedbymeasurementstandards,thereferencedipolesweredemonstratedthatthe SARtarget,impedanceandreturnlosshaveremainstable,sothelongercalibrationintervalis acceptable. 1.2GeneralDescriptionforEquipmentunderTest(EUT) ModelFrequencySerialNumber Product Condition(New/ Used) LastCal. Date LastMeas. Date Dipole DIP0G750750MHz SN11/17 DIP0G750-446 Used2019/03/202020/03/18 DIP0G835835MHz SN11/17 DIP0G835-447 Used2019/03/202020/03/18 DIP0G900900MHz SN11/17 DIP0G900-448 Used2019/03/202020/03/18 DIP1G8001800MHz SN11/17 DIP1G900-449 Used2019/03/202020/03/19 DIP1G9001900MHz SN11/17 DIP1G900-450 Used2019/03/202020/03/19 DIP2G0002000MHz SN11/17 DIP2G000-451 Used2019/03/202020/03/19 DIP2G4502450MHz SN11/17 DIP2G450-452 Used2019/03/202020/03/19 DIP2G6002600MHz SN11/17 DIP2G600-453 Used2019/03/202020/03/19 Waveguide SWG55005GHz-6GHz SN49/16 WGA42 Used2019/03/202020/03/20 3/25 1.3TestEquipmentList DescriptionManufacturerModelSerialNo.Cal.DateCal.Due PCDellN/AN/AN/AN/A E-FieldProbeMVGSSE2SN34/15SSE2EPGO2652019/05/162020/05/15 Phantom1SATIMOSAMSN30/13SAM103N/AN/A Phantom2SATIMOSAMSN30/13SAM104N/AN/A MultiMeterKeithley MultiMeter 2000 40240222019/06/172020/06/16 SignalGeneratorR&SSMBV100A2605922019/06/132020/06/12 PowerMeterR&SNRVD-B27250BJ-0112/20112019/10/302020/10/29 PowerSensorR&SNRV-Z41003812019/10/302020/10/29 PowerSensorR&SNRV-Z21002112019/10/302020/10/29 SignalGeneratorR&SSMBV100A2605922019/06/132020/06/12 ThermometerElitechRC-4HCN/A2019/11/022020/11/01 PowerAmplifierSATIMO6552B22374N/AN/A DielectricProbeKitSATIMOSCLMPSN25/13OCPG56N/AN/A AttenuatorCOM-MWZA-S1-311305003187N/AN/A DirectionalcouplerAA-MCSAAMCS-UDC000272N/AN/A 4/25 1.4EUTPhotos DIP0G750-446 DIP0G835-447 5/25 DIP0G900-448 DIP1G800-449 DIP1G900-450 DIP2G000-451 6/25 DIP2G450-452 DIP2G600-453 WaveguideSWG5500 7/25 2DIPOLEIMPEDANCEANDRETURNLOSS Thedipolesaredesignedtohavelowreturnlosswhenpresentedagainstaflatphantomatthespecified distance.AVectorNetworkAnalyzerwasusedtoperformareturnlossmeasurementonthespecificdipole wheninthemeasurementlocationagainstthephantomandthedistancewasspecifiedbythemanufacturer withaspecial,lowlossandlowrelativepermittivityspacer. TheimpedancewasmeasuredattheSMA-connectorwiththenetworkanalyzer. Themeasurementofverificationwithreturnlossshouldnotdeviatebymorethan20%andminimumof20dBof thereturnloss,andtheimpedance(realorimaginaryparts)shouldnotdeviatebymorethan5Ohmsfromthe previousmeasurementusingnetworkanalyzer. Note: The“PreviousMeas.”inthefollowingtablerefertodipolesorotherequivalentRFsourcescalibrationreports. 8/25 2.1DIP0G750 RETURNLOSSANDIMPEDANCEINHEADLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-26.12-32.481.1% Impedance53.2Ω+2.7jΩ51.6Ω+1.7jΩ 0.8Ω (Imaginarypart) ReturnLoss Impedance 9/25 RETURNLOSSANDIMPEDANCEINBODYLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-26.69-23.503.8% Impedance50.1Ω+5.4jΩ48.8Ω+6.6jΩ 1.0Ω (Realpart) ReturnLoss Impedance 10/25 2.2DIP0G835 RETURNLOSSANDIMPEDANCEINHEADLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-31.42-34.073.1% Impedance55.6Ω-3.4jΩ49.3Ω+1.8jΩ 2.3Ω (Imaginarypart) ReturnLoss Impedance 11/25 RETURNLOSSANDIMPEDANCEINBODYLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-24.02-22.964.0% Impedance47.3Ω+5.0jΩ45.3Ω+5.3jΩ 0.9Ω (Realpart) ReturnLoss Impedance 12/25 2.3DIP0G900 RETURNLOSSANDIMPEDANCEINHEADLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-30.91-30.382.0% Impedance50.39Ω-2.4jΩ51.8Ω-2.4jΩ 1.4Ω (Realpart) ReturnLoss Impedance 13/25 RETURNLOSSANDIMPEDANCEINBODYLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-28.58-27.293.5% Impedance54.4Ω+2.1jΩ53.4Ω+2.6jΩ 0.3Ω (Realpart) ReturnLoss Impedance 14/25 2.4DIP1G800 RETURNLOSSANDIMPEDANCEINHEADLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-23.52-25.493.1% Impedance41.6Ω+3.3jΩ45.4Ω+2.6jΩ 3.2Ω (Realpart) ReturnLoss Impedance 15/25 RETURNLOSSANDIMPEDANCEINBODYLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-26.39-26.353.7% Impedance46.0Ω+3.4jΩ45.4Ω-1.5jΩ 1.8Ω (Realpart) ReturnLoss Impedance 16/25 2.5DIP1G900 RETURNLOSSANDIMPEDANCEINHEADLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-27.40-24.2016.2% Impedance52.4Ω+6.6jΩ51.2Ω+6.0jΩ 1.4Ω (Imaginarypart) ReturnLoss Impedance 17/25 RETURNLOSSANDIMPEDANCEINBODYLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-25.02-22.4512.2% Impedance50.4Ω+6.6jΩ46.7Ω+6.7jΩ 2.8Ω (Realpart) ReturnLoss Impedance 18/25 2.6DIP2G000 RETURNLOSSANDIMPEDANCEINHEADLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-24.19-24.613.6% Impedance53.8Ω–1.0jΩ54.3Ω–4.0jΩ 1.9Ω (Realpart) ReturnLoss Impedance 19/25 RETURNLOSSANDIMPEDANCEINBODYLIQUID Meas.ResultsCurrentMeas.PreviousMeas.Max.Deviation ReturnLoss(dB)-…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2040775-602 2 / 65 Revision History Version Issue Date Revisions Content Rev. 01 Jun. 01, 2020 Initial Issue TABLE OF CONTENTS 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) .......................................................................... 5 1.1 Identification of the Testing Laboratory ....................................................................................... 5 1.2 Identification of the Responsible Testing Location ...................................................................... 5 1.3 Laboratory Condition ................................................................................................................... 5 1.4 Announce .................................................................................................................................... 5 2 PRODUCT INFORMATION ...................................................................................................................... 6 2.1 Applicant Information ................................................................................................................... 6 2.2 Manufacturer Information ............................................................................................................ 6 2.3 Factory Information ..................................................................................................................... 6 2.4 General Description for Equipment under Test (EUT) ................................................................ 6 2.5 Technical Information .................................................................................................................. 7 2.6 Additional Instructions ................................................................................................................. 8 3 SUMMARY OF TEST RESULTS .............................................................................................................. 9 3.1 Test Standards ............................................................................................................................ 9 3.2 Verdict ......................................................................................................................................... 9 4 GENERAL TEST CONFIGURATIONS ................................................................................................... 10 4.1 Test Environments .................................................................................................................... 10 4.2 Test Equipment List ................................................................................................................... 10 4.3 Measurement Uncertainty ......................................................................................................... 11 4.4 Description of Test Setup .......................................................................................................... 12 4.4.1 For Antenna Port Test ............................................................................................................... 12 4.4.2 For AC Power Supply Port Test ................................................................................................ 12 4.4.3 For Radiated Test (Below 30 MHz) ........................................................................................... 13 4.4.4 For Radiated Test (30 MHz-1 GHz) .......................................................................................... 13 4.4.5 For Radiated Test (Above 1 GHz) .............................................…

Text truncated - open the document above for the full version.