2AUDO-V6V7Automatic Clamping Mount

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ShenzhenItianTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2023-7-4 FCCID:2AUDO-V6V7 Ref.#1:AttestationStatementsPart2.911(d)(5)(i)Filing ShenzhenItianTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorization issoughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorization pursuanttosection2.903oftheFCCrules. Ref.#2:AttestationStatementsPart2.911(d)(5)(ii)Filing ShenzhenItianTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Applicant:ShenzhenItianTechnologyCo.,Ltd. Address:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China ContactPerson:JiankunZhao Tel.:15814454134 Email:[email protected] Sincerely, Signature:

Shenzhen Itian Technology Co.,Ltd. SignedonbehalfofClevelandInternational TradeAgency signature Name:BeckyDeng Title:Manager Address ： 6F,Building D, Phase 2nd , Anfeng Industrial Park , Dalang Street , Longhua District,Shenzhen , China FRN:0028652667 Date: 2023-07-07 FederalCommunicationsCommission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT:FCCApplication for FCC ID: 2AUDO-V6V7 Shenzhen Itian Technology Co.,Ltd. certifies that, as of the date of the filing of the application, Cleveland International Trade Agency. is our designated U.S. agent for service of process for the above referenced FCC ID. Shenzhen Itian Technology Co.,Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Cleveland International TradeAgency accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. DesignatedU.S. Agent Information: Name: Cleveland International Trade Agency Address: 4033 ST Clair Ave, Cleveland, OH 44103, USA FRN: 0033401837 Contact Person: BeckyDeng Tel.: 216-600-0606 Email: [email protected] Sincerely, Date:2023-07-0 Signed on behalf of Shenzhen Itian Technology Co.,Ltd. signature Name: Jiankun Zhao Title:General Manager Date: 2023-7-77

ShenzhenItianTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:July14,2023 Subject;RequestforConfidentiality FCCID:2AUDO-V6V7 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:JiankunZhao Title:GeneralManager

ShenzhenItianTechnologyCo.,Ltd. ModelConfirmationLetter We,ShenzhenItianTechnologyCo.,Ltd. certifytheproduct:AutomaticClampingMount ModelNo.: V6,V7 Thecircuitdesign,layout,componentsusedandinternalwiringareallthesame,except forthecolordifference. Date:2023-7-4

ShenzhenItianTechnologyCo.,Ltd. Date：2023-7-4 ProductModelNumber:V6,V7 FCCID：2AUDO-V6V7 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatORGANIZATION.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyORGANIZATION.onourbehalf shallhavethesameeffectasactsofourown. By:JiankunZhao ContactListedonFCCWesbite Title:GeneralManager Email:[email protected] Telephone:15814454134 Onbehalfof:ShenzhenItianTechnologyCo.,Ltd.

ExternalPhotos

InternalPhotos

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TESTREPORT Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothe sample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. xcReportNo.:CQASZ20230601024E Applicant: ShenzhenItianTechnologyCo.,Ltd. AddressofApplicant: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,LonghuaDistrict, Shenzhen,China EquipmentUnderTest(EUT): EUTName: AutomaticClampingMount ModelNo.: V6,V7 TestModelNo.: V6 BrandName: ITIAN FCCID: 2AUDO-V6V7 Standards:47CFRPart15,SubpartB,ClassB DateofReceipt:2023-6-7 DateofTest:2023-6-7to2023-6-14 DateofIssue:2023-6-30 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230601024E Page:2of21 1Version RevisionHistoryofReport ReportNo.Version Description IssueDate CQASZ20230601024ERev.01 Initialreport 2023-6-30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230601024E Page:3of21 2TestSummary TestItemTestRequirementTestmethodResult RadiatedEmission47CFRPart15BANSIC63.4-2014PASS ConductedEmission (150kHzto30MHz) 47CFRPart15BANSIC63.4-2014PASS Highestfrequencygeneratedorusedinthedevice oronwhichthedeviceoperatesortunes (MHz) UpperfrequencyofmeasurementRange (MHz) Below1.70530 1.705to1081000 108to5002000 500to10005000 Above10005thharmonicofthehighestfrequencyor40GHz, whicheverislower Note: Theproductoperatesat12MHz,below108MHz,sothereisnoneedtotestAbove1GHz ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230601024E Page:4of21 3Contents Page 1VERSION...............................................................................................................................................................................2 2TESTSUMMARY.................................................................................................................................................................3 3CONTENTS...........................................................................................................................................................................4 4GENERALINFORMATION.................................................................................................................................................5 4.1CLIENTINFORMATION......................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT...................................................................................................................................5 4.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD.........................................................................................5 4.4TESTENVIRONMENTANDMODE......................................................................................................................................5 4.5DESCRIPTIONOFSUPPORTUNITS.................................................................................................................................6 4.6TESTLOCATION...............................................................................................................................................................6 4.7DEVIATIONFROMSTANDARDS........................................................................................................................................6 4.8ABNORMALITIESFROMSTANDARDCONDITIONS...........................................................................................................6 4.9OTHERINFORMATIONREQUESTEDBYTHECUSTOMER...............................................................................................6 4.10MEASUREMENTUNCERTAINTY(95%CONFIDENCELEVELS,K=2).............................................................................6 5EQUIPMENTLIST................................................................................................................................................................7 6TESTRESULTSANDMEASUREMENTDATA.............................................................................................................8 6.1CONDUCTEDEMISSIONS.................................................................................................................................................8 6.2RADIATEDEMISSION.....................................................................................................................................................12 APPENDIX1PHOTOGRAPHSOFTESTSETUP..........................................................................................................16 APPENDIX2PHOTOGRAPHSOFEUT...........................................................................................................................17 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230601024E Page:5of21 4GeneralInformation 4.1ClientInformation Applicant: ShenzhenItianTechnologyCo.,Ltd. AddressofApplicant: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China Manufacturer: ShenzhenItianTechnologyCo.,Ltd. AddressofManufacturer: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China Factory: ShenzhenItianTechnologyCo.,Ltd. AddressofFactory: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China 4.2GeneralDescriptionofEUT ProductName: AutomaticClampingMount ModelNo.: V6,V7 TestModelNo.: V6 TradeMark: ITIAN EUTPowerSupply: PowerbytheAdapterDC5V2A 4.3 ProductSpecificationsubjectivetothisstandard TestMode: NormalworkingKeeptheEUTinNormalworking ChargingmodeKeeptheEUTinChargingmode Note: ModelNo.:V6,V7 Thecircuitdes…

Text truncated - open the document above for the full version.

TestPhotos RadiatedemissionTestSetup(30MHz~1GHz) ConductedemissionTestSetup