
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCAuthorizationv02Page1of1 ShenzhenItianTechnologyCo.,Ltd. AttestationStatementLetterI FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Date:2023-6-28 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCApplicationforFCCID:2AUDO-V8AV8S ShenzhenItianTechnologyCo.,Ltd.certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedforreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely Applicant’sSignature: Applicant’sname:JiankunZhao
Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCAuthorizationv02Page1of1 ShenzhenItianTechnologyCo.,Ltd. AttestationStatementLetterII FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Date:2023-6-28 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCApplicationforFCCID:2AUDO-V8AV8S ShenzhenItianTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentity producing"covered”equipment. Sincerely Applicant’sSignature: Applicant’sname:JiankunZhao
Shenzhen Itian Technology Co.,Ltd. SignedonbehalfofClevelandInternational TradeAgency Signature Name:BeckyDeng Title:Manager Address : 6F,Building D, Phase 2nd , Anfeng Industrial Park , Dalang Street , Longhua District,Shenzhen, China FRN: 0028652667 Date: 2023-07-03 FederalCommunicationsCommission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT:FCCApplication for FCC ID:2AUDO-V8AV8S Shenzhen Itian Technology Co.,Ltd. certifies that, as of the date of the filing of the application, Cleveland International Trade Agency. is our designated U.S. agent for service of process for the above referenced FCC ID: 2AUDO-V8AV8S. Shenzhen Itian Technology Co.,Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Cleveland International TradeAgency accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. DesignatedU.S. Agent Information: Name: Cleveland International Trade Agency Address: 4033 ST Clair Ave, Cleveland, OH 44103, USA FRN: 0033401837 Contact Person: BeckyDeng Tel.: 216-600-0606 Email: [email protected] Sincerely, Date:2023- Signed on behalf of Shenzhen Itian Technology Co.,Ltd. Signature Name:Jiankun Zhao Title:General Manager Date: 2023-7-307-03
Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCConfidentialityv02Page1of1 ShenzhenItianTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 ConfidentialityRequestregardingapplicationforcertificationofFCCID:2AUDO- V8AV8S PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequest confidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName 1.BlockDiagram, 2.Schematics, 3.OperationalDescription 1.2AUDO-V8AV8S-Blockdiagram 2.2AUDO-V8AV8S-SCH 3.2AUDO-V8AV8S-Operationaldescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateofthe Grantforthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealso requesttemporaryconfidentialtreatmentofinformationaccompanyingthisapplication asoutlinedbelowforaninitialperiodofxxxx(ie-“45”,“90”or“180”)days: ExhibitTypeFileName N/AN/A Signature: Contactname:JiankunZhao Companyname:ShenzhenItianTechnologyCo.,Ltd. Address:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China
Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCAuthorizationv02Page1of1 ShenzhenItianTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Date:2023-6-28 SUBJECT:FCCApplicationfor(FCCID:2AUDO-V8AV8S) ToWhomItMayConcern: We,theundersigned,herebyauthorizeHedyHuangin ShenzhenHuaxiaTesting TechnologyCo.,Ltdat1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad, DalangStreet,LonghuaDistrict,Shenzhen,Chinaonourbehalf,toapplytotheFederal CommunicationsCommissiononourequipment.Anyandallactscarriedoutby ShenzhenHuaxiaTestingTechnologyCo.,Ltd onourbehalfshallhavethesame effectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We, theapplicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection 5301oftheAnti-DrugActof1988,21USC853a,andnopartytotheapplicationis subjecttoadenialoffederalbenefitspursuanttothatsection. Sincerely, (MustbesignedbythepersonthatislistedontheFCCWebsite) Signature: Contactname:JiankunZhao Companyname:ShenzhenItianTechnologyCo.,Ltd. Address:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,LonghuaDistrict,Shenzhen,China
ShenzhenItianTechnologyCo.,Ltd. ModelConfirmationLetter We,ShenzhenItianTechnologyCo.,Ltd. certifytheproduct: 2in1WirelessChargerStand ModelNo.: V8A,V8S Thecircuitdesign,layout,componentsusedandinternalwiringareallthesame,except forthecolordifference. Date:2023-6-28
ExternalPhotos
Label size:30*25.6mm
InternalPhotos
ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.: CQASZ20230600954E-02 Applicant:ShenzhenItianTechnologyCo.,Ltd. AddressofApplicant:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China EquipmentUnderTest(EUT): Product:2in1WirelessChargerStand ModelNo.:V8A,V8S TestModelNo.:V8A BrandName:ITIAN FCCID:2AUDO-V8AV8S Standards:47CFRPart1.1307 47CFRPart1.1310 KDB680106D01RFExposureWirelessChargingBaseAppv03r01 DateofReceipt:2023-6-1 DateofTest:2023-6-1to2023-6-26 DateofIssue: 2023-6-30 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230600954E-02 Page:2of10 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20230600954E-02Rev.01 Initialreport 2023-6-30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230600954E-02 Page:3of10 2Contents Page 1VERSION............................................................................................................................................................................2 2CONTENTS........................................................................................................................................................................3 ..................................................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION...................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT...................................................................................................................................4 3.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD...........................................................................................4 3.4TESTENVIRONMENT......................................................................................................................................................5 3.5DESCRIPTIONOFSUPPORTUNITS..................................................................................................................................5 3.6TESTLOCATION.............................................................................................................................................................6 3.7TESTFACILITY...............................................................................................................................................................6 3.8EQUIPMENTLIST............................................................................................................................................................6 4RFEXPOSUREEVALUATION.......................................................................................................................................7 4.1RFEXPOSURECOMPLIANCEREQUIREMENT.................................................................................................................7 4.1.1Limits....................................................................................................................................................................7 4.1.2TestProcedure...................................................................................................................................................7 4.1.3TestSetup...........................................................................................................................................................8 4.1.4TestResults........................................................................................................................................................8 APPENDIXA:PHOTOGRAPHSOFTESTSETUP.....................................................................................................10 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230600954E-02 Page:4of10 3GeneralInformation 3.1ClientInformation Applicant: ShenzhenItianTechnologyCo.,Ltd. AddressofApplicant: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China Manufacturer: ShenzhenItianTechnologyCo.,Ltd. AddressofManufacturer: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China Factory:ShenzhenItianTechnologyCo.,Ltd. AddressofFactory:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China 3.2GeneralDescriptionofEUT ProductName: 2in1WirelessChargerStand ModelNo.: V8A,V8S TestModelNo.: V8A BrandName: ITIAN SoftwareVersion: V8-V1 HardwareVersion: V8-V12 EUTPowerSupply: DC5V=2A 3.3ProductSpecificationsubjectivetothisstandard EquipmentCategory:Non-ISMfrequency OperationFrequencyrange:110kHz~205kHz ModulationType:ASK AntennaType:Inductioncoil AntennaGain:0dBi Power:Output:8W(Max) Note: 1.Insection15.31(m),regardstotheoperatingfrequencyrangeless1MHz. 2.ModelNo.:V8A,V8S OnlythemodelV8Awastested,sincethecircuitdesign,layout,componentsusedandinternalwiringareall thesame,exceptforthecolordifference. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230600954E-02 Page:5of10 3.4TestEnvironment OperatingEnvironment: Temperature: 25.5 C Humidity:53%RH AtmosphericPressure:1009mbar TestMode: Modea:Wirelessout…
Text truncated - open the document above for the full version.
Page1of4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address: 东莞市石碣镇西沙路 2 号 Tel : 86-076986018114Fax : 86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 东莞市金赞智能科技有限公司 产品规格书 PRODUCTSPECIFICATION 拟制 PREPAREDBY 跟单员 MERCHANDISER 工程审核 ENGINEER CHECKEDBY 制程审核 PRODUCTION CHECKDEDBY 批准 APPROVEDBY 王云帆 客户:深圳市翊天科技有限公司 CUSTOMER:____________________________________________________________________ 客户料号: CUSTP/N:____________________________________________________________________ 金赞料号: KCP/N:____________________________________________________________________ 产品型号:苹果手表线圈(带磁铁8.1uH)-线圈长8mm14*21*0.08*24P*14TS*8MM DESE: 日期:2023.3.24 DATE:____________________________________________________________________ 版本:A.0 VERSION:____________________________________________________________________ (客户承认受领印)ACCEPTANCESTAMP Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel:86-076986018114Fax:86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 14*20.5*0.08*24P*14TS*8MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 2 1.产品外形尺寸(OVERALLDIMENSIONSOFPRODUCTS): 版本 Rev. 变更前 BeforeChange 变更后内容 DESCRIPTION(ContentOrReasonForChanged) 日期 Date 修订者 Revisor A.0--新发行(InitialRelease)2023/4/1王云帆 Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel:86-076986018114Fax:86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 14*20.5*0.08*24P*14TS*8MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 3 单位 (Unit): 毫米 (mm) PS:1.C为磁外引线长度;2.H不含进线;3.线圈反贴;4.J不含离型纸 圈数 Turns 线径 WireDia. 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 线圈正/反贴 Coil Positive/AntiPaste 14TS 0.08*24P热风绞线 (HotAirstrandedWire) 密绕(Close) 逆时针 (Anticlockwise) 是(Yes)反贴(Anti-Paste) ABCDEFG 2±1 1-2 8+2/-014±0.521MAX7.5MAX7.8±0.5 HIJK L 1.05±0.052.5±0.22.85MAX25±1 2.2±0.1 Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel:86-076986018114Fax:86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 14*20.5*0.08*24P*14TS*8MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 4 所有材料要求合格ROHS标准 2.电气特性(ELECTRICALCHARACTERISTICS): 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±10% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1INDS-F线圈:4.9uH±10%1kHz/VLCZMETER1062 1INDS-F线圈加磁片:8.1uH±10%1kHz/VLCZMETER1062 3.材料清单(BILLOFMATERIAIS): 材料名称 Materialname 品名描述 Description 物料代码 MaterialCode 厂商代码 Vendorcode 线材/wirerod0.08*24P热风绞线 JX-2U-F-0009 ZY 软磁片/Softmagneticsheet G25±1*7.8*2.5±0.2H(有孔有槽) (小槽:5.2*2.0H大槽8.5*2.0H)磁片表面无Logo GCP-T-00206QT 3M背胶(灰色)/ 3Madhesive(grey) 圆形15*0.15H(带手撕)/ Round15*0.15H(withhandtear) SMJ-3M-00042 MLS 锡条/tinbar 环保无铅焊锡条/Environmentally friendlylead-freesolderbar 无铅高温锡条/ Lead-freehigh temperaturetin strip XC 强磁铁N48/StrongmagnetN487.5*2.2H(2800-3200GS)CT-T-0008YY
Page1of4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address: 东莞市石碣镇西沙路 2 号 Tel : 86-076986018114Fax : 86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 东莞市金赞智能科技有限公司 产品规格书 PRODUCTSPECIFICATION 拟制 PREPAREDBY 跟单员 MERCHANDISER 工程审核 ENGINEER CHECKEDBY 制程审核 PRODUCTION CHECKDEDBY 批准 APPROVEDBY 王云帆 客户:深圳市翊天科技有限公司 ShenzhenItianTechnologyCo.,Ltd. CUSTOMER:____________________________________________________________________ 客户料号:061.001 CUSTP/N:____________________________________________________________________ 金赞料号:061.001 KCP/N:____________________________________________________________________ 名称型号:(通用磁吸线圈-开槽线长40MM)20.5*42*0.08*105P*10TS*40MM( Universalmagneticcoil-slottedlinelength40MM)20.5*42*0.08*105P*10TS*40MM DESE: 日期:2023.3.23 DATE:____________________________________________________________________ 版本:A.0 VERSION:____________________________________________________________________ (客户承认受领印)ACCEPTANCESTAMP Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel:86-076986018114Fax:86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 061.001 20.5*42*0.08*105P*10TS*40MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 2 版本 Rev. 变更前 BeforeChange 变更后内容 DESCRIPTION(ContentOrReasonForChanged) 日期 Date 修订者 Revisor A.0--新发行(InitialRelease)2023/3/23王云帆 Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel:86-076986018114Fax:86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 061.001 20.5*42*0.08*105P*10TS*40MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 3 1.产品外形尺寸(OVERALLDIMENSIONSOFPRODUCTS): 单位(Unit):毫米(mm) PS:1.(F)为磁外引线长度;2.(H)包含进线,不包含离型纸 (F)thelengthoftheoutermagneticlead;2.(H)Includesincomingwire,notreleasepaper 3.(进出线部分如图)线圈4分之一不打胶:方便客户穿5MM灯板排线4:线圈内孔无溢胶(避免灯板突起) (asshowninthefigurefortheinletandoutletwires)Coil1/4noglue:easyforcustomerstowire5MM ABCDEFGHI 5.3±0.520.5±0.542±0.544+0/-13±140±21.2±0.052.6MAX10±2 Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel:86-076986018114Fax:86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 061.001 20.5*42*0.08*105P*10TS*40MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 4 lightboard4:coilholenoglueoverflow(avoidprotrudinglightboard) 圈数 Turns 线径 WireDia. 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 线圈正/反贴 Coil Positive/AntiPaste 10TS 0.08*105P小线径丝包 线(Silk-CoveredWire) 密绕(Close) 逆时针 (Anticlockwise) 是(Yes)反贴(Anti/-Paste) 所有材料要求合格ROHS标准 2.电气特性(ELECTRICALCHARACTERISTICS): 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±10% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1INDS-F 线圈:3.6uH±10% 100kHz/VLCZMETER1062 2INDS-F 线圈加磁片:6.3uH±10% 100kHz/VLCZMETER1062 3.材料清单(BILLOFMATERIAIS): 序号 NO. 材料名称 Materialname 品名描述 Description 物料代码 MaterialCode 厂商代码 Vendorcode 1 线材/wirerod0.08*105P小线径丝包线0.08*105P smalldiametersilkcoveredwire SBX-2U-F-0011ZY 2 铁氧体 /ferrite G44(+0/-1)*5.3*1.0(+0/-0.1)H (带孔,带双槽L槽) GCP-T-0077LX 3 双面胶/double sidesadhesive tape 42*5.3*0.08H(带孔,带手撕) 42*5.3*0.08H(withhole,withhand tear) SMJ-00064 NR Pageof4 东莞市金赞智能科技有限公司 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:东莞市石碣镇西沙路2号Tel:86-076986018114Fax:86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 061.001 20.5*42*0.08*105P*10TS*40MM 拟制 PREPAREDBY 工程审核 ENGINEERCHECKEDBY 制程审核 PRODUCTIONCHECKEDBY 5 4 胶水/glueJS-E7202(加稠)白胶/ JS-E7202(thickened)whiteglue E7202WHZY 5 锡条/tinbar环保无铅焊锡条/ Environmentallyfriendlylead-free solderbar 无铅高温锡条/ Lead-freehigh temperaturetin strip XC
ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TestReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonly tothesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20230600954E-01 Applicant:ShenzhenItianTechnologyCo.,Ltd. AddressofApplicant:6F,BuildingD,Phase2nd,AnfengIndustrialPark,DalangStreet,Longhua District,Shenzhen,China EquipmentUnderTest(EUT): Product:2in1WirelessChargerStand ModelNo.:V8A,V8S TestModelNo.:V8A BrandName:ITIAN FCCID:2AUDO-V8AV8S Standards:47CFRPart15,SubpartC DateofReceipt:2023-6-1 DateofTest:2023-6-1to2023-6-26 DateofIssue: 2023-6-30 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230600954E-01 Page: 2 of 33 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20230600954E-01Rev.01 Initialreport 2023-6-30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230600954E-01 Page: 3 of 33 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement 47CFRPart15,SubpartCSection 15.203 ANSIC63.102013PASS ACPowerLine Conducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.102013PASS 20dBOccupied Bandwidth 47CFRPart15,SubpartCSection 15.215 ANSIC63.102013PASS RadiatedEmission, RadiatedSpurious Emissions 47CFRPart15,SubpartCSection 15.209 ANSIC63.102013PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230600954E-01 Page: 4 of 33 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS......................................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION.................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT.................................................................................................................................5 4.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD........................................................................................5 4.4TESTENVIRONMENT...................................................................................................................................................6 4.5DESCRIPTIONOFSUPPORTUNITS...............................................................................................................................6 4.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................................7 4.7TESTLOCATION..........................................................................................................................................................7 4.8TESTFACILITY............................................................................................................................................................7 4.9DEVIATIONFROMSTANDARDS....................................................................................................................................7 4.10OTHERINFORMATIONREQUESTEDBYTHECUSTOMER............................................................................................7 4.11EQUIPMENTLIST.......................................................................................................................................................8 5TESTRESULTSANDMEASUREMENTDATA.......................................................................................................9 5.1ANTENNAREQUIREMENT............................................................................................................................................9 5.2CONDUCTEDEMISSIONS............................................................................................................................................10 5.320DBOCCUPYBANDWIDTH......................................................................................................................................15 5.4RADIATEDSPURIOUSEMISSION&RESTRICTEDBANDS...........................................................................................17 5.4.1SpuriousEmissions......................................................................................................................................17 6PHOTOGRAPHS-EUTTESTSETUP.....................................................................................................................24 6.1RADIATEDEMISSION.................................................................................................................................................24 6.2CONDUCTEDEMISSION..............................................................................................................................................25 7PHOTOGRAPHS-EUTCONSTRUCTIONALDETAILS......................................................................................26 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20230600954E-01 Page: 5 of 33 4GeneralInformation 4.1ClientInformation Applicant: ShenzhenItianTechnologyCo.,Ltd. AddressofApplicant: 6F,BuildingD,Phase2nd,AnfengIndustrialPark,Da…
Text truncated - open the document above for the full version.
TestPhotos 9kHz~30MHz: 30MHz~1GHz: 1.1 ConductedEmission
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 0.11 MHz - 0.205 MHz | - |

Magnetic Power Bank
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
3 in 1 Magnetic Charging Station
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
MAGNETIC POWER BANK
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
3 in 1 Magnetic Charging Station
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
3 in 1 Wireless Charger
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz