2AUPG-Q-538Wireless Intercom Doorbell

17 DISCLAIMER AND OPERATION GUIDLINES Q-538 About Q358 Doorbell 10 1.Solar panel 2.Speaker 3.Bell button 4.Talking button 5.Pairing button 6.Power 7.Volume 8.Bell-ring 9.Channel 10.Charger port 11.Charger dock Picture 1 3 NameFunction Press the outdoor unit bell to call the indoor unit, the indoor unit will ring ("ding-dong" or music) to remind visitors coming. Re-pairing key Volume Bell Doorbell music Press it to choose your favorite ringings. Channel 3 channels for choice. A, B,C. Please check and make sure that indoor and outdoor units' channels are the same. Please check its corresponding frequencies and CDCS CODES in Table 2. Power TALK button After received a voice from the indoor unit, press and hold the talk button to speak. (Speaking time, within 60s) Led indicators Blue light indicate pairing status, Red light indicates the power. Press and hold for 3 seconds, the mechine enters into pairing mode. OUTDOOR 4 3.2. Installation 3.2.1. Indoor Unit installation Already assembled, ready for charging and using. Please put it in the charging dock for charging while not use to avoid missing visitors caused by out of power. 3.1. Included parts 5. Screws *6 6. Screwdriver *1 7. User manual *1 8. USB Cable *1 9. Battery *2 1. Outdoor machine *1 2. Solar panel *1 3. Indoor machine *1 4. Chagrer dock *1 Picture 2 6 Picture 3 Indoor Outdoor 7 5.1.2. Channel Pairing There are 3 channels for choice. Make sure that both units are in the same channel so that the machines could work. Factory default setting is the same. OutdoorIndoor Picture 6 9 Outdoor Indoor Outdoor Indoor Hello!H H Hello! 1234 TALK Press When Talk Picture 7 10 Note: 1. To save power, the outdoor machine will fall into sleeping mode if it does not detect operations within 25 seconds. Under sleeping mode, the indoor machine will unable to talk with the outdoor machine. However, if anyone clicks the CALL button of outdoor machine, it will be activated and the indoor machine can talk with it after receiving the ringing. 2. Under the sleeping mode of the outdoor unit, the indoor unit cannot talk with the outdoor unit. Only the outdoor mac hine is initiated by pressed its bell button, and the indoor machine can talk after receiving its ringing. TALK Press When Talk 11 Frequency table(Table 2) CHANNEL FREQ CDCS CODE 462.7250MHz 462.58750MHz 462.61250MHz 754N 754N 754N A B C 12 Indoor Outdoor Picture 8 1314 Outdoor Indoor Outdoor Indoor Indoor A B Blue light 2.Additional indoor unit B same channel 1.Additional indoor unit B Picture 10 15 A Indoor B Have a tone Common Trouble Intercom works well, but no ring Both intercom and ring not working Outdoor unit does not work Solutions Out of pairing, please re-pair it. 16 Outdoor Click Indoor/Outdoor Outdoor Picture 4 Picture 5 8 INDOOR NameFunction 1. Press the Bell button to cut the ringing. 2. Press the bell to call other intercom devices which are in the same frequency. (checking corresponding frequencies and CDCS CODES in Table 2.) Re-pairing key Volume Bell Doorbell music Press it to choose your favorite ringings. There are 20 musics for choice. Channel Power TALK button When received a ringing from the outdoor unit: 1.press once to cut the ringing 2.press and hold the button of the indoor unit to speak. (speaking time, within 60s). Led indicators TALK Press When Talk 5 Press and hold for 3 seconds, the mechine enters into pairing mode. 3 Channels for choice. A, B,C. Please check and make sure that indoor and outdoor units' channels are the same. Please check its corresponding frequencies and CDCS CODES in Table 2. Before You Begin Check that you have all of the included parts. Read the entire user manual. Read the disclaimer and warning above to understand your legal rights and responsibilities. If you have any questions or problems during the installation, maintenance or use of this product, please contact QNIGLO service team: [email protected]. Warning Never disassemble or pierce the product in any way or the warranty will not cover the personal disassembled products. The QNIGLO doorbell, equipped with a wireless intercom system, combined the doorbell and intercom functions, realizes to talk with visitors without opening the door. Better protects the people in the house and more safety for people living alone. 2 Amazon is the only authorized selling channel of QNIGLO products. Customers who buy QNIGLO products from all other channels(except Amazon) could not have QNIGLO warranty policy and shall take their own responsibilities for all possible loss. QNIGLO do not have any responsibility to them. 1 QNIGLO intercom doorbell can connect with QNIGLO Intercom system. Please check Table2 for corresponding channel&code for connection. Note: 1. When you set the corresponding Channel&code, doorbell can talk with our brand intercom. 2. Click the CALL button of outdoor machine, the intercom will not have ring even set the corresponding channel&code. However; Click the ON/OFF button for indoor machine, the intercom will have ring. The outdoor machine can only talk wi th intercom, but can not CALL and give a ring alert before talking. The indoor machine can communicate and make the intercom ring the bell as well. 17 Blue light indicate pairing status, Red light indicates the power. Content 4.1. Charging dock 4.2. USB Cable *Both indoor and outdoor units need to be charged before use. *Put them in the charging dock to charge them in turns. There is a charging indicator in the dock, a red light means charging, a green light means fully charged.If the indicator light doesn't turn on, please adjust the units charging position. 1 2 6 6 6 6 6 7 7 7 9 9 9 10 10 12 12 13 13 15 16 17 17 . Disclaimer and Warning . Product Overview . Installation 3.1. Included parts 3.2. Installation 3.2.1. Indoor unit installation 3.2.2. Outdoor unit installation . Charge 4.1. Charging dock 4.2. USB Cable . Instructions 5.1. Doorbell Function 5.1.1 Power on/off 5.1.2. Channel Pairing 5.1.3. Doorbell 5.2. Inter…

Text truncated - open the document above for the full version.

Differences Declaration To whom concern, We company Shenzhen Crony Electronic Technology Co., Ltd. hereby declares: The product model(s) Q-538, Q-538 Plus is identical in the same PCB layout, interior structure and electrical circuits with the model Q-538 which tested in Shenzhen Huatongwei International Inspection Co., Ltd, the only differences are the model name for commercial purpose. Sold with 2 prototypes of the same model, one is outdoor unit, one is indoor unit; outdoor unit and indoor unit is identical in the same PCB layout, interior structure and electrical circuits. Outdoor unit Indoor unit Main unit Charge unit Sincerely yours, Name: Wei Wang Position: Project CompanyAdress: 2201, Huichao Technology Building, Jinhai Road, Yantian Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong Tel/Fax: +8615859229653 E-Mail: [email protected]

Report No.: CHTEW22070014 Page: 26 of 34 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 7. EXTERANAL AND INTERNAL PHOTOS 7.1. EXTERANAL PHOTOS Report No.: CHTEW22070014 Page: 27 of 34 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) Outdoor Report No.: CHTEW22070014 Page: 28 of 34 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) Report No.: CHTEW22070014 Page: 29 of 34 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) Indoor Report No.: CHTEW22070014 Page: 30 of 34 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) Report No.: CHTEW22070014 Page: 31 of 34 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01)

Label location for outdoor unit and indoor unit

Report No.: CHTEW22070014 Page: 29 of 31 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 7.2. INTERNAL PHOTOS Report No.: CHTEW22070014 Page: 30 of 31 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) Report No.: CHTEW22070014 Page: 31 of 31 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 8. APPENDIX REPORT

Page: 1 of 18 TEST REPORT Report No..................................: CHTEW22070015 Report Verification: Project No.................................： SHT2206065003EW FCC ID ............................................. : 2AUPG-Q-538 Applicant’s name ........................... : Shenzhen Crony Electronic Technology Co., Ltd. Address ............................................. : 2201, Huichao Technology Building, Jinhai Road, Yantian Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong Test item description .................... : Wireless Intercom Doorbell Trade Mark ....................................... : QNIGLO Model/Type reference ....................... : Q-538 Listed Model(s) ................................. : Q-538 Plus Standard ......................................... : FCC CFR Title 47 Part 15 Subpart B Date of receipt of test sample...........: Jun.27, 2022 Date of testing..............................: Jun.28, 2022- Jul.01, 2022 Date of issue.................................: Jul.04, 2022 Result .................. ........................: PASS Compiled by (Position-Printed name-Signature) : File administrators Fanghui Zhu Supervised by (Position-Printed name-Signature) : Project Engineer Caspar Chen Approved by ( position+printed name+signature) .. : RF Manager Hans Hu Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd. Address ............................................. : 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report merely corresponds to the test sample. Report No.: CHTEW22070015 Page: 2 of 18 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) Contents C H T E W 2 2 0 7 0 0 14-C r o n y-F C C P a r t 9 5 B F R S A p p e n d i x1. .......TEST STANDARDS AND REPORT VERSION ............................................................................... 3 1.1. Test Standards 3 1.2. Report version 3 2. TEST DESCRIPTION .................................................................... 4 3. SUMMARY ............................................................................... 5 3.1. Client Information 5 3.2. Product Description 5 3.3. Radio Specification Description 5 3.4. Testing Laboratory Information 5 4. TEST CONFIGURATION ................................................................. 6 4.1. EUT operation mode 6 4.2. Support unit used in test configuration 6 4.3. Environmental conditions 6 4.4. Statement of the measurement uncertainty 6 4.5. Equipments Used during the Test 7 5. TEST CONDITIONS AND RESULTS ..................................................... 8 5.1. Conducted Emissions 8 5.2. Radiated Emissions 11 6. TEST SETUP PHOTOS OF THE EUT .................................................. 17 7. EXTERNAL AND INTERNAL PHOTOS OF THE EUT .................................. 18 Report No.: CHTEW22070015 Page: 3 of 18 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 1. TEST STANDARDS AND REPORT VERSION 1.1. Test Standards The tests were performed according to following standards: FCC CFR Title 47 Part 15 Subpart B - Unintentional Radiators ANSI C63.4: 2014 – American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40GHz 1.2. Report version Revision No. Date of issue Description N/A 2022-07-04 Original Report No.: CHTEW22070015 Page: 4 of 18 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 2. TEST DESCRIPTION Test Item Section in CFR 47 Result Test Engineer Conducted Emissions 15.107(a) Pass Quanhai Deng Radiated Emissions 15.109(a) Pass Hongtao Meng Note: The measurement uncertainty is not included in the test result. Report No.: CHTEW22070015 Page: 5 of 18 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 3. SUMMARY 3.1. Client Information Applicant: Shenzhen Crony Electronic Technology Co., Ltd. Address: 2201, Huichao Technology Building, Jinhai Road, Yantian Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong Manufacturer: Shenzhen Crony Electronic Technology Co., Ltd. Address: 2201, Huichao Technology Building, Jinhai Road, Yantian Community, Xixiang Street, Bao'an District, Shenzhen, Guangdong 3.2. Product Description Main unit Name of EUT: Wireless Intercom Doorbell Trade Mark: QNIGLO Model/Type reference: Q-538 Listed Model(s) Q-538 Plus Power supply: DC 3.7V form Rechargeable Li-ion battery Hardware version: 01V03 Software version: 01V01 3.3. Radio Specification Description Operation Frequency Range: (Receive unit) Main channel: (462MHz) 462.7250MHz Interstitial channel: (462MHz) 462.5875, 462.6125 MHz Modulation Type: FM Antenna Type: built-in 3.4. Testing Laboratory Information Laboratory Name Shenzhen Huatongwei International Inspection Co., Ltd. Laboratory Location 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China Connect information: Tel: 86-755-26715499 E-mail: [email protected] http://www.szhtw.com.cn Qualifications Type Accreditation Number FCC 762235 Report No.: CHTEW22070015 Page: 6 of 18 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 4. TEST CONFIGURATION 4.1…

Text truncated - open the document above for the full version.

Report No.: CHTEW22070015 Page: 17 of 18 Issued: 2022-07-04 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V03 (2021-01) 6. TEST SETUP PHOTOS OF THE EUT Conducted Emissions (AC Mains) Radiated Emissions