2AV57GATAA2Asset Tracker

Geotab GO ® Anywhere™ Plus Support Document For the most up-to-date version of this document, visit gtb.link/goanywhereplusguide. Table of contents Product overview 3 Getting started 3 Installation guide 3 Quick start guide 3 Device functionality 3 Battery-only device functionality 4 Changing the device mode 4 Movement: Delayed updates 5 Movement: Immediate updates 6 Time 6 High frequency mode 6 Battery insights 7 Wired device functionality 8 Direct-to-cell 8 Security 9 Support and troubleshooting 9 Technical specifications 9 Warranty 12 Important safety information and limitations of use 12 Regulatory statements 13 Warning: RF Exposure Compliance 13 Canada 13 USA 14 Mexico 14 © 2025 Geotab Inc. All Rights Reserved 2 Product overview GO Anywhere™ Plus is a versatile and robust global asset tracker designed for a wide range of powered and non-powered assets, including trailers, containers, and heavy equipment. The device provides deep insights into asset utilization by monitoring movement, trip history, and distance traveled (odometer), alongside ignition (engine hours) for maintenance scheduling. With unique direct-to-cell technology (available through select partners), it ensures reliable tracking even in areas without cellular coverage. Getting started Installation guide Refer to the GO Anywhere Plus Trailer Installation Guide for information about mounting GO Anywhere Plus and harnesses on trailers. Quick start guide Refer to the GO Anywhere Plus Quick Start Guide for installation information such as how to activate the GO Anywhere, what the LEDs mean, where to verify activation, and how to get started with the device. Device functionality The GO Anywhere device can operate in two configurations depending on its installation: battery-only and wired. © 2025 Geotab Inc. All Rights Reserved 3 Battery-only device functionality When the GO Anywhere Plus device does not have external wired power available, Customers can choose to place the device in one of four device modes: ● Movement: delayed updates ● Movement: immediate updates ● Time ● High frequency mode Movement: delayed updates Movement: immediate updates Time Device mode overview Monitors asset movement Uploads trip summaries once/day Most battery-optimized Monitors asset movement Provides updates when an asset starts moving Uploads trip summaries and trip end details at completion of trip Most battery-intensive Provides asset location updates at a Customer-specified frequency Who is it best suited for? Assets where long battery life is a top priority and daily movement summaries are sufficient Assets where understanding movement details quickly is important, recognizing significant battery drain as a result Assets where periodic, specific location updates are necessary. Battery life will differ depending on customer-specified update frequency. Changing the device mode To change the device mode for an asset: 1. Navigate to Assets in the MyGeotab main menu. 2. Select the asset you want to update to open the Asset Details page. 3. Go to the Devices & Settings tab, and click Show advanced settings under GO Anywhere. 4. Under the advanced settings, select the Device mode using the radio buttons. 5. Click Save. © 2025 Geotab Inc. All Rights Reserved 4 Movement: Delayed updates This is the default device mode. In this mode, the GO Anywhere Plus provides you daily summaries of asset movement while maximizing battery life. It’s best for assets where long battery life is the top priority and daily summaries of asset movement are sufficient. Delayed updates uses the following behavior: ● The device tracks when an asset takes a trip: ○ Trip Start is defined as when a device is moving faster than 15 km/h OR the device’s displacement from its last recorded position exceeds 200m ○ During a trip, the device gathers location data every 30 minutes ○ Trip End is defined as when an asset is stationary for 1 hour or more © 2025 Geotab Inc. All Rights Reserved 5 ● The device stores all information for trips that occur over the course of a 24 hour period. The device will then upload all trip information to MyGeotab at 12:00 AM (Midnight) ● If a device is stationary, it will update its location in MyGeotab every 7 days at 12:00AM (Midnight) ✱ NOTE: All times are in respect to the device’s local time zone. Due to network bandwidth considerations, the device may update up to 15 minutes ahead of the times chosen. Movement: Immediate updates This mode provides near-real-time updates on when trips start and end, along with trip history shortly after completion. This mode is best for assets where knowing when a trip starts/ends relatively quickly is important, recognizing the increased battery usage as a result. When using the immediate updates device mode, it’s important to keep in mind that asset use will impact reporting frequency. Assets that take frequent trips will report location frequently, leading to increased battery drain. In these cases, this mode is not recommended. Immediate updates uses the following behavior: ● The device will update its location when movement is detected (Trip Start). This update allows users to understand in MyGeotab that an asset is currently in motion. ○ Trip Start begins when a device is moving faster than 15 km/h OR the device’s displacement from its last recorded position exceeds 200m ○ During a trip, the device gathers location data every 30 minutes and stores this information for upload at the trip end ○ Once the device detects that a trip has ended (asset is stationary for 1 hour or more), the device updates all stored data gathered from a trip ● If a device is stationary, it will update its location in MyGeotab every 7 days. The specific update time is determined from the end of the last trip. Time This device mode provides predictable location updates at user-defined intervals, regardless of movement. The device updates its location based on the time and frequency you set in MyGeotab; regardless of the device being …

Text truncated - open the document above for the full version.

Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada March 18, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer Subject: Covered Equipment Certification Attestation Letter Applicant: Geotab Inc. FCC ID: 2AV57GATAA2 The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Benjamin Jull Title: Manager, Product Certification Company Name: Geotab Inc. Date: March 18, 2026

Geotab USA Inc. 6543 S. Las Vegas Blvd. Suite 200 Las Vegas, NV 89119, United States U.S. Agent Designation for Service of Process - Certification Attestation Letter March 18, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AV57GATAA2 Applicant FRN: 0029155058 This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent* for Service of Process for the equipment under application: U.S. Agent for Service of Process: ●Company Name: Geotab USA Inc. ●Physical U.S. Company Address: 6543 S. Las Vegas Blvd. Suite 200 Las Vegas, NV 89119, United States ●Agent Name: Benjamin Jull ●Agent Email Address: [email protected] ●Agent FRN**: 0034951392 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: ●Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. ●The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed:Designated Agent Signed: (Required, if different to Applicant) Signed: Signed: * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. ** the agent does not have an FRN because they do no other business with the FCC except for acting as a US agent for service of process, and therefore are not required to have their own FRN. Geotab USA Inc. 6543 S. Las Vegas Blvd. Suite 200 Las Vegas, NV 89119, United States Printed name: Benjamin Jull Printed name: Benjamin Jull Manager, Product Certification Geotab USA Inc. March 18, 2026 Title: Manager, Product Certification Title: Company Name: Geotab Inc. Company Name: Date: March 18, 2026 Date: * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. ** the agent does not have an FRN because they do no other business with the FCC except for acting as a US agent for service of process, and therefore are not required to have their own FRN.

Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada Dated: March 18, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC Certification Application Dear Director of Certification, This letter formally appoints Spencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party involved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti-Drug Abuse Act of 1988 (21 U.S.C. §862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Geotab, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Agency agreement expiration date: *Up to 12 months Sincerely, Signature: Name:Benjamin Jull Title: Manager, Product Certification Company:Geotab Inc. Address:2440 Winston Park Drive, Oakville, Ontario, Canada L6H 7V2 Phone: +1 (877) 436-8221 Email:[email protected]

Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada March 18, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Confidentiality – FCC FCC ID: 2AV57GATAA2 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Selection of exhibits for LTC - generalExhibit name ☒ Permanent (Long Term)Block Diagrams ☒ Permanent (Long Term)Operation Description / Theory of Operation ☒ Permanent (Long Term)Parts List & Placement / BOM ☒ Permanent (Long Term)Schematics Selection of exhibits for LTC - specific 1 Exhibit name Permanent (Long Term)Tune-Up Procedure Permanent (Long Term)SDR 2 Software / Security Info We also request the exhibits selected below as short term confidential (STC) be withheld from public view for a period of 180 days 3 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public: Selection of exhibits for STC 4 Exhibit name Short TermUser’s Manual Short TermInternal Photos Short TermExternal Photos Short TermTest Setup Photos Short TermTune-Up Procedure (for Licensed equipment only) Our company has spent a substantial effort in developing this product and it is one of the first of its kind in the industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. 1 - Tune up procedure is applicable only for licensed equipment. 2 - The FCC rules require that any radio, in which the software is designed or expected to be modified by a party other than the manufacturer that would affect the operating parameters of frequency range, modulation type, maximum output power or other radio frequency parameters outside the range under which the transmitter has been approved in accordance with the FCC rules, must be certified as a software-defined radio (SDR). 3 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. 4 - Any exhibits that may have already been requested to have “Permanent” confidentiality need not be repeated under Short-Term confidentiality request. Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed by: Benjamin Jull SignaturePrint name Manager, Product Certification Title +1 (877) 436-8221 Phone Geotab Inc. Company 2440 Winston Park Drive, Oakville, Ontario, L2H 7V2, Canada Address

Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada March 18, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Special Confidentiality – FCC FCC ID: 2AV57GATAA2 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Selection of exhibits for LTC (with NDA) 1 Exhibit name Permanent (Long Term)Internal Photos The circuit board and internal components are inaccessible to users and are serviceable only by designated professional technicians under NDA. All sales of these devices must be subject to an NDA that restricts the disclosure of proprietary information, including internal photographs. Sample NDA is attached with this application. Our company has invested significant resources in developing this innovative product, which is one of the industry's first of its kind. Public disclosure of the subject information could undermine our competitive advantage and lead to financial loss. Protecting the details of our design is essential to safeguarding our intellectual property. The information provided contains trade secrets and proprietary information that is not typically disclosed to the public. Public disclosure of this information could harm the applicant and provide an unfair advantage to competitors. The applicant understands that, pursuant to Rule 0.457 (d)(1)(ii), disclosure of this application and all accompanying materials will not occur before the grant date. Sincerely, Signed by:Benjamin Jull SignaturePrint name Manager, Product Certification Title +1 (877) 436-8221 Phone Geotab Inc. 1 - These items require further information to be provided to TCB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and review section II, 3) regarding specific information (NDA) that must accompany these requests. Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada Company 2440 Winston Park Drive, Oakville, Ontario, L2H 7V2, Canada Address

CONFIDENTIALITY AND NON-DISCLOSURE AGREEMENT This Confidentiality and Non-Disclosure Agreement (the "Agreement"), effective as of the date of last signature hereto (the "Effective Date"), is entered into by and between GEOTAB INC., an Ontario corporation, having its principal place of business at 2440 Winston Park Drive, Oakville, Ontario L6H 7V2 Canada (the "Disclosing Party") and the entity identified in the signature blocks at the end of this Agreement (the "Recipient", and together with the Disclosing Party, the "Parties", and each a "Party"). CONTEXT: A. In connection with the facilitation of discussions, negotiations, and potential business collaboration between the Parties (the "Purpose"), the Recipient desires to receive Confidential Information from the Disclosing Party; B. The Disclosing Party desires to disclose such Confidential information to the Recipient, subject to the terms and conditions of this Agreement; and C. The Disclosing Party wishes to protect and preserve the confidentiality of such information. NOW, THEREFORE, in consideration of the mutual covenants, terms and conditions set forth herein, and for other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the Parties agree as follows: 1. Definitions. For purposes of this Agreement, the following terms have the following meanings: (a) "Confidential Information" means all information, data, documents, agreements, files and other materials regarding or concerning the Disclosing Party or its affiliates, whether disclosed orally or disclosed or stored in written, electronic or other form or media, which is disclosed or otherwise furnished by the Disclosing Party or its Representatives before, on or after the date hereof, including all analyses, notes, compilations, reports, forecasts, studies, samples, statistics, summaries, interpretations and other documents prepared by or for the Recipient or its Representatives which contain or otherwise reflect or are generated from such information, data, documents, agreements, files or other materials, whether or not marked, designated or otherwise identified as "confidential". The term "Confidential Information" as used herein shall not include information that: (i) is or becomes generally available to and known by the public (other than as a result of its disclosure directly or indirectly by the Recipient or its Representatives in violation of this Agreement); (ii) is or becomes available to the Recipient from a source other than the Disclosing Party or its Representatives, provided that such source, to the best of the Recipient's knowledge after reasonable inquiry, was not and is not bound by a confidentiality agreement regarding the Disclosing Party or its affiliates, or otherwise prohibited from disclosing such information by a legal, contractual or fiduciary obligation; (iii) was already known by or in the possession of the Recipient as established by documentary evidence, prior to being disclosed by or on behalf of the Disclosing Party pursuant to this Agreement; (iv) has been independently developed by the Recipient as established by documentary evidence, without violating any of its obligations under this agreement/use of or reference to, in whole or in part, the Confidential Information. (b) "Person" means any individual, partnership (whether general, limited or limited liability), corporation, association, trust or other entity. (c) "Personal Information" means information that: (i) relates to an individual person; and (ii) identifies or can be used to identify, locate or contact that individual alone or when combined with other personal or identifying information that is or can be associated with that specific individual. (d) "Representatives" means, as to any Person, such Person's affiliates, and its and their respective directors, officers, employees, general partners, shareholders, agents and consultants (including lawyers, financial advisors and accountants). Other terms not specifically defined in this Section 1 shall have the meanings given to them elsewhere in this Agreement. 2. Recipient's Obligations. The Recipient shall: (a) keep the Confidential Information strictly confidential and protect and safeguard the confidentiality of all such Confidential Information with at least the same degree of care as the Recipient would protect its own 2 Confidential Information, but in no event with less than a commercially reasonable degree of care; (b) not use the Confidential Information, or permit it to be accessed or used, for any purpose other than the Purpose, or otherwise in any manner to the Disclosing Party's detriment, including without limitation, to reverse engineer, disassemble, decompile or design around the Disclosing Party's proprietary services, products and/or confidential intellectual property; (c) without the prior written consent of the Disclosing Party, not disclose or permit its Representatives to disclose any Confidential Information to any Person except: (i) if required by law or regulation, rule or valid court order or pursuant to any requirement, request or process of any legal or, regulatory, supervisory or governmental authority, but only in accordance with Section 5; or (ii) to its Representatives, to the extent necessary to permit such Representatives who need to know the Confidential Information to assist the Recipient in relation to the Purpose and for no other purpose provided, the Recipient shall: (A) inform the Recipient's Representatives of the confidential nature of the Confidential Information; (B) be responsible for any breach of this Agreement by any of its Representatives; (C) use reasonable controls to prevent unauthorized use or disclosure of the Confidential Information (but in any event no less than the degree of care and control that the Recipient uses to protect its own confidential information of similar importance); (D) promptly notify the Disclosing Party of any unauthorized …

Text truncated - open the document above for the full version.

Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada GATAA2 External Photos Top © 2026 Geotab Inc. All Rights Reserved Photo report for the GATAA2 1 Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada Bottom © 2026 Geotab Inc. All Rights Reserved Photo report for the GATAA2 2 Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada Front © 2026 Geotab Inc. All Rights Reserved Photo report for the GATAA2 3 Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada Rear © 2026 Geotab Inc. All Rights Reserved Photo report for the GATAA2 4 Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada Side 1 © 2026 Geotab Inc. All Rights Reserved Photo report for the GATAA2 5 Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada Side 2 © 2026 Geotab Inc. All Rights Reserved Photo report for the GATAA2 6 Geotab Inc. 2440 Winston Park Drive Oakville, Ontario L6H 7V2, Canada Weight © 2026 Geotab Inc. All Rights Reserved Photo report for the GATAA2 7

Label design: Label location (bottom): Product label

Label design: Label location (bottom): Product label

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC and ISED MPE Calculation; Date: July 2024 Choose Scandinavian trust RADIO TEST REPORT Report ID Project ID REP157377 PRJ0088090 Type of assessment: MPE Calculation report Manufacturer: Geotab Inc. Product Marketing Name (PMN): Hardware Version Identification Number (HVIN): GO Anywhere Plus GATAA2 Contains FCC ID: 2AV57GATAA2, XMR2023EG916QGL Specification:  FCC 47 CFR Part 1 Subpart I, §1.1307, §1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06 Date of issue: March 27, 2026 Alvin Liu, EMC/RF Specialist Prepared by Signature Report reference ID: REP157377 Page 2 of 5 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road, Ottawa, ON, Canada, K1V 1H2 Tel: +1 613 737 9680 Test site registration number: CA2040 Montréal site: 292 Labrosse Avenue, Pointe-Claire, QC, Canada, H9R 5L8 Tel: +1 514 694 2684 Test site registration number: CA2041 Cambridge site: 1-130 Saltsman Drive, Cambridge, ON, Canada, N3E 0B2 Tel: +1 519 650 4811 Test site registration number: CA0101 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP157377 Page 3 of 5 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Evaluation summary ........................................................................................................................................................................... 4 1.1 MPE calculation for simultaneous transmission ....................................................................................................................................................... 4 Section 1.1 MPE calculation for simultaneous transmission Report reference ID: REP157377 Page 4 of 5 Evaluation summary 1.1 MPE calculation for simultaneous transmission 1.1.1 References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1) — Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. Equation from page 18 of OET Bulletin 65, Edition 97-01 푆= 푃퐺 4휋푅 2 where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) 1.1.2 EUT technical information Transmitter 1 (LTE) T…

Text truncated - open the document above for the full version.