2AVEIJERNANO-F4113Carbon Nanotube Heating Film

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. iwarm 3.0 uses soft,thin material as the core heating material,which converts electricity quickly into heat energy through efficient electrothermal conversion. I.Features of iwarm 3.0 1. Driving force:5V,high safety factor(<36V); 2. Planar heating, even heating, fast heating,comfortable; 3. The far-infrared wavelength emitted by iwarm 3.0 is very close to the human body; 4. Realize intelligent and touch-tune control mode, meet the requirements of different people and different temperatures in different environments. II.About products 1.Product photos 2.Bluetooth function Connect the USB connector to the 5V / 2A mobile power interface, long-perss the controller, let the Bluetooth light flashing, Controller enters Bluetooth connection status. 3.Using steps (1). Download and install app for mobile phone. (2). Install the APP, open your phone Bluetooth, enter the software interface and long-perss the controller, let the Bluetooth light flashing, click on the “+” to add intelligent wearing, then you can work on the iwarm 3.0 independently III.Controller Controller usage guide Control lamp condition Output level Red light long bright High level Orange light long bright Middle level White light long bright Low level Red light flashing Heating sheet reaches setting high level temperature Orange light flashing Heating sheet reaches setting middle level temperature White light flashing Heating sheet reaches setting low level temperature Bluetooth light flashing Open your phone bluetooth,the controller and your phone must in 2 meters,then connect APP Purple/red light fast flashing The master controller is wrong,please connect with manufacturer IV.Product description 1. Heating clothes are prohibited from dry cleaning. They can be washed by machine or hand at room temperature. After washing, they need to be fully dried before they can be used again. 2. Strictly forbidden to charge and discharge on the edge of mobile power supply. 3. Please turn off or remove the mobile power when not use. Avoid heating when not dress, Forbid using sleep. V.Product parameters Name: iwarm 3.0 One piece size:180mm*300mm Three piece size:150mm*220mm*1P+150mm*120mm*2P Using temperature:-20°C to 70°C Using relative humidity:≤85RH% VI.Disabled groups *Infants and without self-care ability; *Careful use of pregnant women VII.Product packing configuration 1. 1 set Heating component; 2. 1 copy instruction manual; 3. 1 tag. [Warranty terms] 1. From the date of saling. Free warranty within one year(not-human damage); 2. The following cases are not in the warranty scope: beyond the scope of attention, improper use, self-repair or man-made sabotage(including misoperation),and use the product for other purpose beyond the scope,etc. 3. Within the scope of the law, our company reserves the right of modification and final interpretation of the warranty; 4. The provisions of laws and regulations are clearly defined and enforced.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 3 Page 1 of 3 External Photos Applicant: Suzhou Creative Nano Carbon Co. Ltd. Address of Applicant: NO.398 Ruoshui Road, Suzhou Industrial Park, China Equipment Under Test (EUT): Product Name: Carbon Nanotube Heating Film Model No.: JD-F4113 (iwarm 3.0/iwarm 1.0) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 3 Page 2 of 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 3 Page 3 of 3 End

Label location

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 2 Page 1 of 2 Internal Photos Applicant: Suzhou Creative Nano Carbon Co. Ltd. Address of Applicant: NO.398 Ruoshui Road, Suzhou Industrial Park, China Equipment Under Test (EUT): Product Name: Carbon Nanotube Heating Film Model No.: JD-F4113 (iwarm 3.0/iwarm 1.0) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 2 Page 2 of 2 End

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886702 Page: 1 of 7 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. 1 Cover Page RF Exposure REPORT Application No.: SHEM1911018867CR FCC ID: 2AVEIJERNANO-F4113 Applicant: Suzhou Creative Nano Carbon Co. Ltd. Address of Applicant: NO.398 Ruoshui Road, Suzhou Industrial Park, China Manufacturer: Suzhou Creative Nano Carbon Co. Ltd. Address of Manufacturer: NO.398 Ruoshui Road, Suzhou Industrial Park, China Factory: Suzhou Creative Nano Carbon Co. Ltd. Address of Factory: NO.398 Ruoshui Road, Suzhou Industrial Park, China Equipment Under Test (EUT): EUT Name: Carbon Nanotube Heating Film Model No.: JD-F4113 (iwarm 3.0/iwarm 1.0) Add Model No.: JD-F4111 (iwarm 3.0/iwarm 1.0) Standard(s) : FCC Rules 47 CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt: 2019-11-14 Date of Test: 2019-11-16 to 2019-11-27 Date of Issue: 2019-12-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886702 Page: 2 of 7 Revision Record Version Description Date Remark 00 Original 2019-12-03 / Authorized for issue by: Bill Wu / Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886702 Page: 3 of 7 2 Contents Page 1 COVER PAGE ................................................................................................................................................ 1 2 CONTENTS ..................................................................................................................................................... 3 3 GENERAL INFORMATION .......................................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................... 4 3.2 DETAILS OF E.U.T. .................................................................................................................................. 4 3.3 TEST LOCATION ....................................................................................................................................... 5 3.4 TEST FACILITY .......................................................................................................................................... 5 4 TEST STANDARDS AND LIMITS ............................................................................................................... 6 4.1 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................................... 6 5 MEASUREMENT AND CALCULATION .................................................................................................... 7 5.1 MAXIMUM TRANSMIT POWER .................................................................................................................... 7 5.2 RF EXPOSURE CALCULATION ................................................................................................................. 7 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886702 Page: 4 of 7 3 General Information 3.1 General Description of E.U.T. Power supply: DC 5V By PC Test voltage: DC 5V 3.2 Details of E.U.T. Antenna Gain 1.5dBi Antenna Type PCB Antenna Channel Spacing 2MHz Modulation Type GFSK Number of Channels 40 Operation Frequency 2402MHz to 2480MHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886702 Page: 5 of 7 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L0599) CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • NVLAP (Certificate No. 201034-0) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the National Voluntary Laboratory Accreditation Program(NVLAP). Certificate No. 201034-0. • FCC –Designation Number: CN5033 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. Designation Number: CN5033. Test Firm Registration Number: 479755. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by ISED as an accredited testing laboratory. IC Registration No.: 8617A-1. CAB identifier: CN0020. • VCCI (Member No.: 3061) The 3m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-13868, C-14336, T-12221, G-10830 respectively. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886702 Page: 6 of 7 4 Test Standards an…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886701 Page: 1 of 47 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. TEST REPORT Application No.: SHEM1911018867CR FCC ID: 2AVEIJERNANO-F4113 Applicant: Suzhou Creative Nano Carbon Co. Ltd. Address of Applicant: NO.398 Ruoshui Road, Suzhou Industrial Park, China Manufacturer: Suzhou Creative Nano Carbon Co. Ltd. Address of Manufacturer: NO.398 Ruoshui Road, Suzhou Industrial Park, China Factory: Suzhou Creative Nano Carbon Co. Ltd. Address of Factory: NO.398 Ruoshui Road, Suzhou Industrial Park, China Equipment Under Test (EUT): EUT Name: Carbon Nanotube Heating Film Model No.: JD-F4113 (iwarm 3.0/iwarm 1.0), JD-F4111 (iwarm 3.0/iwarm 1.0) ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2019-11-14 Date of Test: 2019-11-16 to 2019-11-27 Date of Issue: 2019-12-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886701 Page: 2 of 47 Revision Record Version Description Date Remark 00 Original 2019-12-03 / Authorized for issue by: Bill Wu / Project Engineer Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886701 Page: 3 of 47 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(c) Customer Declaration Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Note: There are series models mentioned in this report, and they are the similar in electrical and electronic characters. Only the model JD-F4113 (iwarm 3.0/iwarm 1.0) was tested since their differences were the model number, trade name and appearance. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM191101886701 Page: 4 of 47 3 Contents Page 1 COVER PAGE.............................................................................................................................................. 1 2 TEST SUMMARY ......................................................................................................................................... 3 3 CONTENTS .................................................................................................................................................. 4 4 GENERAL INFORMATION ......................................................................................................................... 5 4.1 DETAILS OF E.U.T.................................................................................................................................. 5 4.2 DESCRIPTION OF SUPPORT UNITS ........................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY ................................................................................................................ 5 4.4 TEST LOCATION ..................................................................................................................................... 6 4.5 TEST FACILITY ....................................................................................................................................... 6 4.6 DEVIATION FROM STANDARDS ................................................................................................................ 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 6 5 EQUIPMENT LIST ....................................................................................................................................... 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ................................................................................... 8 6.1 ANTENNA REQUIREMENT ........................................................................................................................ 8 7 RADIO SPECTRUM MATTER TEST RESULTS ...........…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 5 Page 1 of 5 Test Setup Photos-FCC Applicant: Suzhou Creative Nano Carbon Co. Ltd. Address of Applicant: NO.398 Ruoshui Road, Suzhou Industrial Park, China Equipment Under Test (EUT): Product Name: Carbon Nanotube Heating Film Model No.: JD-F4113 (iwarm 3.0/iwarm 1.0) SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 5 Page 2 of 5 1 Contents Page 1 CONTENTS............................................................................................................... 2 2 EQUIPMENT UNDER TEST PICTURES ............................................................ 3 2.1 Conducted Emission Test Setup ....................................................................... 3 2.2 Radiated Emission Test Setup .......................................................................... 3 2.3 RF Conducted Test Setup ................................................................................. 5 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 5 Page 3 of 5 2 EQUIPMENT UNDER TEST PICTURES 2.1 Conducted Emission Test Setup 2.2 Radiated Emission Test Setup 30MHz to 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 5 Page 4 of 5 Above 1GHz Zoom: SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 5 of 5 Page 5 of 5 2.3 RF Conducted Test Setup End