2AVFNLBS8529TD LTE Base Station

Outdoor 2x20W TDD eNodeB Installation Guide Table of Contents 1. Overview ...................................................................................................................... 1 1.1 Introduction ............................................................................................................... 1 1.2 Features ...................................................................................................................... 2 1.3 Appearance ................................................................................................................ 3 1.4 Technical Specification ............................................................................................... 4 1.4.1 Hardware Specification....................................................................................... 4 1.4.2 Software Specification ........................................................................................ 5 1.4.3 Environment Specification .................................................................................. 6 2. Installation Preparation .............................................................................................. 7 2.1 Support Materials ..................................................................................................... 7 2.2 Installation Tools ...................................................................................................... 7 2.3 Installation Environment ............................................................................................ 8 2.3.1 Location & Environment ..................................................................................... 8 2.4 Lightening & Grounding Protection ........................................................................... 8 2.5 Weatherproofing ........................................................................................................ 9 3. Installation .................................................................................................................... 9 3.1 Overview.................................................................................................................... 9 3.2 Install GPS Antenna .................................................................................................. 10 3.3 Install eNB on Pole or Wall ....................................................................................... 10 3.4 Install on Wall ........................................................................................................... 11 3.5 Connect Cables ......................................................................................................... 12 3.5.1 Cable Laying Requirements .............................................................................. 12 3.5.2 Connect GPS Antenna Cable ............................................................................. 13 3.5.3 Connect RF Cables ............................................................................................ 13 3.5.4 Connect WAN Interface Cable (Optical Fiber) .................................................. 13 3.5.5 Connect Ethernet Cable .................................................................................... 14 3.5.6 Connect Power Connector ................................................................................ 14 3.5.7 Connect Ground Cable ...................................................................................... 15 3.6 Power on to Check LED Status ................................................................................. 15 List of Figures Figure 1-1LBS8529 TDD eNB ...................................................................................... 1 Figure 1-2 LTE Network Architecture ........................................................................... 2 Figure 1-3LBS8529 TDD Appearance ......................................................................... 3 Figure 1-4LBS8529 TDD Interfaces and Indicators ..................................................... 3 Figure 2-1 Weatherproofing ......................................................................................... 9 Figure 3-1 Installation Process ..................................................................................... 9 Figure 3-2 GPS Antenna Installation .......................................................................... 10 Figure 3-3 Power Terminal ......................................................................................... 14 Figure 3-4 Grounding Screws .................................................................................... 15 List of Tables Table 1-1LBS8529 TDD Interfaces ............................................................................... 4 Table 1-2LBS8529 TDD LEDs ...................................................................................... 4 Table 2-1 Supporting Materials ..................................................................................... 7 Table 2-2 Environmental Requirements ....................................................................... 8 1 1. Overview 1.1 Introduction LEAX LBS8529 is an outdoor 2x20W eNodeB (eNB) that enables wired and wireless broadband access to Long-Term Evolution (LTE) backhaul networks using Time Division Duplexing (TDD) technology. With its power and LTE intelligence, this eNB has exceptional non-line-of-sight (NLOS) coverage performance (Figure 1-1). Figure 1-1LBS8529 TDD eNB LEAX provides operators with local and Web-based Graphical User Interface (GUI) software applications to configure and manage individual eNBs and User Equipment (UE). Additionally, LEAX offers a cloud-based, centralized Software-as-a-Service (SaaS) solution called CloudCore. CloudCore, or LEAXCloud, includes all of the key LTE Evolved Packet Core (EPC) network functions (Figure 1-2), an Operations Management Console (OMC) for managing multiple sites across the network, and a Busine…

Text truncated - open the document above for the full version.

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-03-27 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Leax Arkivator Telecom USA Inc. Company Name: Leax Arkivator Telecom USA Inc. Grantee Code: 2AVFN FRN 0029045044 Contact Name: Ying Qu Contact Name: Ying Qu Address: 833 E Arapaho Rd Suite 203, Address: 833 E Arapaho Rd Suite 203, City/Province/Zip: Richardson, Texas 75081, City/Province/Zip: Richardson, Texas 75081, Telephone: 9722315189 Telephone: 9722315189 Fax: 2142312884 Fax: 2142312884 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AVFNLBS8529 ATTN: Director of Certification: We, Leax Arkivator Telecom USA Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Leax Arkivator Telecom USA Inc.acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Ying Qu Name (Printed): Ying Qu Title: General Manager Title: General Manager Signature: Signature:

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Leax Arkivator Telecom USA Inc Address 833 E Arapaho Rd Suite 203,Richardson,Texas,United States Grantee Code 2AVFN FCC ID 2AVFNLBS8529 Authorized Contact Name Ying Qu Contact Email [email protected] Contact Phone 9722315189 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Leax Arkivator Telecom USA Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Leax Arkivator Telecom USA Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2023-03-27 Print Name: Ying Qu Title: General Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Leax Arkivator Telecom USA Inc. Date: 2023-03-27 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AVFNLBS8529 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Keny Xu in SGS- CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Leax Arkivator Telecom USA Inc. This authorization is valid until further written notice from the applicant. Print Name: Ying Qu Title: General Manager Signature: On behalf of Company: Leax Arkivator Telecom USA Inc. Telephone: 9722315189 E-mail: [email protected]

Leax Arkivator Telecom USA Inc. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AVFNLBS8529 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM List Tune up procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Ying Qu Title: General Manager Signature: On behalf of Company: Leax Arkivator Telecom USA Inc. Telephone: 9722315189 E-mail: [email protected]

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Leax Arkivator Telecom USA Inc Address 833 E Arapaho Rd Suite 203,Richardson,Texas,United States Grantee Code 2AVFN FCC ID 2AVFNLBS8529 Authorized Contact Name Ying Qu Contact Email [email protected] Contact Phone 9722315189 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Leax Arkivator Telecom USA Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Leax Arkivator Telecom USA Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2023-03-27 Print Name: Ying Qu Title: General Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-03-27 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Leax Arkivator Telecom USA Inc. Company Name: Leax Arkivator Telecom USA Inc. Grantee Code: 2AVFN FRN 0029045044 Contact Name: Ying Qu Contact Name: Ying Qu Address: 833 E Arapaho Rd Suite 203, Address: 833 E Arapaho Rd Suite 203, City/Province/Zip: Richardson, Texas 75081, City/Province/Zip: Richardson, Texas 75081, Telephone: 9722315189 Telephone: 9722315189 Fax: 2142312884 Fax: 2142312884 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AVFNLBS8529 ATTN: Director of Certification: We, Leax Arkivator Telecom USA Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Leax Arkivator Telecom USA Inc.acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Ying Qu Name (Printed): Ying Qu Title: General Manager Title: General Manager Signature: Signature:

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 6 Appendix External Photos for SZCR2303000836AT FCC ID: 2AVFNLBS8529 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 6 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 6 of 6 Antenna location: - End of the Appendix - Connector of LTE antenna

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 2 Appendix Test Setup Photos for SZCR2303000836AT FCC ID: 2AVFNLBS8529 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 2 Test Setup Photo Radiated Emissions (30MHz-1GHz) Radiated Emissions (above 1GHz) - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300083603 Page: 1 of 7 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2303000836AT Applicant: Leax Arkivator Telecom USA Inc. Address of Applicant: 833 E Arapaho Rd Suite 203, Richardson, Texas 75081 United States Manufacturer: Leax Arkivator Telecom USA Inc. Address of Manufacturer: 833 E Arapaho Rd Suite 203, Richardson, Texas 75081 United States Factory: Leax Arkivator Telecom USA Inc. Address of Factory: 833 E Arapaho Rd Suite 203, Richardson, Texas 75081 United States Equipment Under Test (EUT): EUT Name: TD LTE Base Station Model No.: LBS8529 FCC ID: 2AVFNLBS8529 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-03-28 Date of Evaluation: 2023-03-29 to 2023-05-04 Date of Issue: 2023-05-18 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300083603 Page: 2 of 7 Revision Record Version Chapter Date Modifier Remark 01 2023-05-18 Original Authorized for issue by: Benson Wang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300083603 Page: 3 of 7 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Details of E.U.T. ........................................................................................................................... 4 3.3 Separation Distance ..................................................................................................................... 4 3.4 Test Location ............................................................................................................................... 5 3.5 Test Facility .................................................................................................................................. 5 3.6 Deviation from Standards ............................................................................................................. 5 3.7 Abnormalities from Standard Conditions ....................................................................................... 5 4 FCC Radiofrequency radiation exposure limits ................................................................................ 6 5 Measurement and Calculation ........................................................................................................... 7 5.1 Maximum transmit power ............................................................................................................. 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300083603 Page: 4 of 7 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Adapter Model: HEP-480-54 INPUT: 100-240V 5.5A-2.2A 50/60Hz OUTPUT: DC54V 8.9A DC adapter: INPUT: DC48V OUTPUT: DC13V 4A Cable: GND Cable: 480cm unshielded Adapter Cable: 190cm unshielded DC Adapter cable: 87cm unshielded + 20cm unshielded EUT Type: CBSD Category of EUT: Category B LTE Operation Frequency Band: Band 48 (3550-3700MHz) Test Mode: E-TM1.1; E-TM3.2; E-TM3.1; Modulation Type: QPSK, 16QAM, 64QAM Bandwidth: 5MHz; 10MHz; 15MHz; 20MHz Transmission (TX) and Receiving (RX) Antenna Ports: TX port: 2 MIMO supported 2*2 UL Antenna Type: N-Type connector for external high gain antenna Antenna Gain: 16.5dBi Note: (1)The antenna gain value is provided by the customer. The test lab will not be responsible for wrong test result due to incorrect information about antenna gain values. 3.3 Separation Distance Minimum test separation distance: 90cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300083603 Page: 5 of 7 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-1238…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 13 Effective (Isotropic) Radiated Output Power Data & Maximum Power Spectral Density Conducte d power (dBm) Conducted power (dBm) Conducte d Power (dBm/10 MHz) Conducted Power (dBm/10MHz) PSD (dBm/MHz) PSD (dBm/MHz) (Port 1) (Port 2) (Port 1) (Port 2) (Port 1) (Port 2) TM1.1 5M 3552.5MHz 16.50 1.94 23.33 22.86 26.11 42.61 23.27 22.82 26.06 42.56 47.00 15.42 15.01 20.17 36.67 37.00 Pass TM1.1 5M 3625MHz 16.50 1.94 22.90 23.25 26.09 42.59 22.82 23.17 26.01 42.51 47.00 15.26 15.45 20.31 36.81 37.00 Pass TM1.1 5M 3697.5MHz 16.50 1.94 23.01 22.89 25.96 42.46 22.96 22.84 25.91 42.41 47.00 15.45 15.17 20.26 36.76 37.00 Pass TM1.1 10M 3555MHz 16.50 1.94 25.61 25.22 28.43 44.93 25.61 25.23 28.43 44.93 47.00 14.78 14.48 19.58 36.08 37.00 Pass TM1.1 10M 3625MHz 16.50 1.94 25.54 26.40 29.00 45.50 25.54 26.39 29.00 45.50 47.00 14.85 15.53 20.15 36.65 37.00 Pass TM1.1 10M 3695MHz 16.50 1.94 26.60 26.29 29.46 45.96 26.58 26.30 29.45 45.95 47.00 15.12 15.05 20.04 36.54 37.00 Pass TM1.1 15M 3557.5MHz 16.50 1.94 27.36 28.04 30.72 47.22 26.25 26.76 29.52 46.02 47.00 15.15 15.64 20.35 36.85 37.00 Pass TM1.1 15M 3625MHz 16.50 1.94 28.00 28.39 31.21 47.71 26.91 27.32 30.13 46.63 47.00 15.09 15.52 20.26 36.76 37.00 Pass TM1.1 15M 3692.5MHz 16.50 1.94 28.21 28.37 31.30 47.80 26.97 27.13 30.06 46.56 47.00 15.09 14.99 19.99 36.49 37.00 Pass TM1.1 20M 3560MHz 16.50 1.94 29.03 29.25 32.15 48.65 26.32 26.51 29.43 45.93 47.00 15.23 15.70 20.42 36.92 37.00 Pass TM1.1 20M 3625MHz 16.50 1.94 29.76 30.16 32.97 49.47 27.15 27.54 30.36 46.86 47.00 14.21 14.31 19.21 35.71 37.00 Pass TM1.1 20M 3690MHz 16.50 1.94 29.57 29.90 32.75 49.25 26.84 27.20 30.03 46.53 47.00 13.73 13.67 18.65 35.15 37.00 Pass TM3.1 5M 3552.5MHz 16.50 1.94 22.61 22.68 25.66 42.16 22.82 22.88 25.86 42.36 47.00 15.16 15.05 20.06 36.56 37.00 Pass TM3.1 5M 3625MHz 16.50 1.94 22.57 22.67 25.63 42.13 22.74 22.84 25.80 42.30 47.00 15.17 15.14 20.11 36.61 37.00 Pass TM3.1 5M 3697.5MHz 16.50 1.94 22.78 22.79 25.80 42.30 22.96 22.96 25.97 42.47 47.00 15.21 15.22 20.17 36.67 37.00 Pass TM3.1 10M 3555MHz 16.50 1.94 26.16 25.99 29.09 45.59 26.16 25.99 29.09 45.59 47.00 15.38 15.38 20.33 36.83 37.00 Pass TM3.1 10M 3625MHz 16.50 1.94 25.59 25.95 28.78 45.28 25.60 26.01 28.82 45.32 47.00 15.18 15.47 20.28 36.78 37.00 Pass TM3.1 10M 3695MHz 16.50 1.94 25.48 25.97 28.74 45.24 25.47 25.98 28.74 45.24 47.00 15.03 15.42 20.18 36.68 37.00 Pass TM3.1 15M 3557.5MHz 16.50 1.94 27.33 27.65 30.50 47.00 25.85 26.15 29.01 45.51 47.00 15.21 15.29 20.20 36.70 37.00 Pass TM3.1 15M 3625MHz 16.50 1.94 28.01 27.99 31.01 47.51 26.54 26.52 29.54 46.04 47.00 14.99 14.81 19.85 36.35 37.00 Pass TM3.1 15M 3692.5MHz 16.50 1.94 28.28 28.38 31.34 47.84 26.82 26.92 29.88 46.38 47.00 14.87 15.14 19.96 36.46 37.00 Pass TM3.1 20M 3560MHz 16.50 1.94 28.53 28.87 31.71 48.21 26.00 26.27 29.15 45.65 47.00 15.17 15.36 20.22 36.72 37.00 Pass TM3.1 20M 3625MHz 16.50 1.94 29.82 29.98 32.91 49.41 27.45 27.49 30.48 46.98 47.00 14.29 13.80 19.00 35.50 37.00 Pass TM3.1 20M 3690MHz 16.50 1.94 29.46 29.66 32.57 49.07 26.78 27.09 29.95 46.45 47.00 12.69 12.55 17.57 34.07 37.00 Pass TM3.2 5M 3552.5MHz 16…

Text truncated - open the document above for the full version.