2AVQ6HY0016Homey Bridge

FCC, Request for non-disclosure Date: 12-Jun-2020 RF_501, Issue 8 Page 1 of 1 Company Name: Athom B.V. Address: Rigtersbleek-Zandvoort 10 City: Enschede Country: The Netherlands To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AVQ6HY0016 Reference number: Homey-Bridge-Certification Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This concerns a device that is not yet released or announced to the public, and is a successor of a current device. Pictures and manuals could cause speculation, leaks and other (competitive) disadvantages for our product and company. Date: 12 Jun 2020 Name and signature of applicant: Stefan Witkamp Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Page 1 of 2 External Photo Module Product name : Homey Bridge FCC ID : 2AVQ6HY0016 IC ID : 25905-HY0016 Test report No. 200200216 Test report No. 200200216 Page 1 of 2 Table of Contents 1 External Photos ........................................................................................................................................ 2 1.1 Front/3D View ....................................................................................................................................... 2 1.2 Bottom view .......................................................................................................................................... 2 Test report No. 200200216 Page 2 of 2 1 External Photos 1.1 Front/3D View 1.2 Bottom view

Laser engraving bottom product Model HY0016 FCC ID 2AVQ6HY0016 Athom B.V. 7521BE 10 Netherlands Input: 5V 1A Made in China Product Unique Serial Number

Page 1 of 6 FCC SAR Exclusion Report Product name : Homey Bridge Applicant : Athom B.V. FCC ID : 2AVQ6HY0016 Test report No. : 200200216 FCC RF exposure Ver 1.0 Report number: 200200216 FCC RF exposure Ver 1.0 Page 1 of 6 Laboratory information Accreditation Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2005. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Telefication is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. The Industry Canada registration number for the 3 meter test chamber of Telefication is: 4173A-1. Telefication is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Telefication Netherlands. Testing Location Test Site Telefication BV Test Site location Edisonstraat 12a 6902 PK Zevenaar The Netherlands Tel. +31889983600 Fax. +31316583189 Report number: 200200216 FCC RF exposure Ver 1.0 Page 2 of 6 Revision History Version Date Remarks By v1.00 09-06-2020 Release version PvW Report number: 200200216 FCC RF exposure Ver 1.0 Page 3 of 6 Table of Contents Revision History ............................................................................................................................................... 2 1 General Description ................................................................................................................................. 4 1.1 Applicant ............................................................................................................................................... 4 1.2 Manufacturer ........................................................................................................................................ 4 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 4 1.4 SAR Measurement Evaluation ............................................................................................................... 5 1.4.1 Maximum Output Power .................................................................................................................. 5 1.4.2 SAR Testing Exclusions ...................................................................................................................... 5 Note: ............................................................................................................................................................... 6 1.5 Summary ............................................................................................................................................... 6 Report number: 200200216 FCC RF exposure Ver 1.0 Page 4 of 6 1 General Description 1.1 Applicant Client name: Athom B.V. Address: Rigtersbleek-Zandvoort 10, Enschede, the Netherlands Zip code: 7521 BE Telephone: +31(0)639002706 E-mail: [email protected] Contact name: Mr. Stefan Witkamp 1.2 Manufacturer Client name: Athom B.V. Address: Rigtersbleek-Zandvoort 10, Enschede, the Netherlands Zip code: 7521 BE Telephone: +31(0)639002706 E-mail: [email protected] Contact name: Mr. Stefan Witkamp 1.3 Tested Equipment Under Test (EUT) Product name: HY0016 / HOMEY-BRIDGE-EU-01 Brand name: Homey FCC ID: 2AVQ6HY0016 IC ID: 25905-HY0016 Product type: Smart Home Controller Model(s): Matte Black Shiny Black Black Logo White Batch and/or serial No. -- Software version: 4.0 Hardware version: 4.0 Date of receipt: 09-03-2020 Tests started: 09-03-2020 Testing ended: 29-04-2020 Report number: 200200216 FCC RF exposure Ver 1.0 Page 5 of 6 1.4 SAR Measurement Evaluation 1.4.1 Maximum Output Power The maximum radiated power including tune-up tolerance is shown as below. Mode Maximum power level (dBm) Bluetooth LE 9.3* WLAN 802.11b 17.4* Zigbee 8.5* Zwave 3.28* * from Telefication report 200200216 001 Ver 1.0. 1.4.2 SAR Testing Exclusions According to KDB 447498 D01, the SAR test exclusion condition is based on source-based time- averaged maximum conducted output power, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The SAR exclusion threshold is determined by the following formula. 1. For the test separation distance <= 50 mm When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2. For the test separation distance > 50 mm, and the frequency at 100 MHz to 1500 MHz 3. For the test separation distance > 50 mm, and the frequency at > 1500 MHz to 6 GHz Report number: 200200216 FCC RF exposure Ver 1.0 Page 6 of 6 Under normal use the separation distance is at least 200 mm between the antenna and the user. Mode Max. Tune- up Power (dBm) Max. Tune- up Power (mW) Ant. to Surface (mm) Calculated Limit (mW) Require SAR Testing? BLE 9.3 8.5 200 1500 No WLAN 802.11b 17.4 55.0 200 1500 No Zigbee 8.5 7.1 200 1500 No Zwave 3.28 2.1 200 918 No Note: 1. When separation distance <= 50 mm and the calculated result shown in above table is <= 3.0, the SAR testing exclusion is applied. 2. When separation distance > 50 mm and the device output power is less than the calculated result (power threshold, mW) shown …

Text truncated - open the document above for the full version.

FCC and IC Test report for parts 15.207, 15.209, 15.247, 15.249 RSS-210, RSS-247, RSS-Gen Product name : Homey Bridge Applicant : Athom B.V. FCC ID : 2AVQ6HY0016 IC ID : 25905-HY0016 Test report No. : 200200216 001 Ver 1.00 Report number: 200200216 001 Ver 1.00 Page 1 of 59 Laboratory information Accreditation Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2005. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Telefication is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. The Industry Canada registration number for the 3 meter test chamber of Telefication is: 4173A-1. Telefication is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Telefication Netherlands. Testing Location Test Site Telefication BV Test Site location Edisonstraat 12a 6902 PK Zevenaar The Netherlands Tel. +31316583180 Fax. +31316583189 Test Site FCC NL0001 Report number: 200200216 001 Ver 1.00 Page 2 of 59 Revision History Version Date Remarks By v0.5 03-06-2020 First draft PS v1.0 10-06-2020 Initial issue PS Report number: 200200216 001 Ver 1.00 Page 3 of 59 Table of Contents Revision History .............................................................................................................................................. 2 Summary of Test results .................................................................................................................................. 6 1 General Description ................................................................................................................................. 7 1.1 Applicant ................................................................................................................................................ 7 1.2 Manufacturer ........................................................................................................................................ 7 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 7 1.4 Product specifications of Equipment under test ................................................................................... 8 1.5 Environmental conditions...................................................................................................................... 8 1.6 Measurement standards ....................................................................................................................... 8 1.7 Applicable standards ............................................................................................................................. 9 1.8 Observation and remarks ...................................................................................................................... 9 1.9 Conclusions .......................................................................................................................................... 10 2 Test configuration of the Equipment Under Test ................................................................................... 11 2.1 Test mode ............................................................................................................................................ 11 2.2 Test setups ........................................................................................................................................... 11 2.3 Equipment used in the test configuration ........................................................................................... 13 2.4 Sample calculations ............................................................................................................................. 13 3 Test results ............................................................................................................................................ 14 3.1 Field strength of fundamental emissions measurement (Zwave) ....................................................... 14 3.1.1 Limit ................................................................................................................................................. 14 3.1.2 Measurement instruments ............................................................................................................. 14 3.1.3 Test setup ........................................................................................................................................ 14 3.1.4 Test procedure ................................................................................................................................ 14 3.1.5 Measurement Uncertainty .............................................................................................................. 14 3.1.6 Results of the field strength of fundamental emissions measurement .......................................... 14 3.2 Cabinet radiated spurious emissions ................................................................................................... 15 3.2.1 Limit ......................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 3 Test Setup Photo Module Product name : Homey Bridge FCC ID : 2AVQ6HY0016 IC ID : 25905-HY0016 Test report No. 200200216 Test report No. 200200216 Page 1 of 3 Contents 1 Test Setup Photos .................................................................................................................................... 2 1.1 Radiated emissions measurement 30 – 1000 MHz ............................................................................... 2 1.2 Radiated emissions measurement 1 – 18 GHz ...................................................................................... 2 1.3 Radiated emissions measurement 18 – 26 GHz .................................................................................... 3 Test report No. 200200216 Page 2 of 3 1 Test Setup Photos 1.1 Radiated emissions measurement 30 – 1000 MHz 1.2 Radiated emissions measurement 1 – 18 GHz Test report No. 200200216 Page 3 of 3 1.3 Radiated emissions measurement 18 – 26 GHz