2AVSB-IC-Q2Wireless Car Charger

Product Parts Description IC-Q2 25W产品说明书 尺寸：280*100mm 单面印刷 材质：128克铜版纸 15V/3A 70% 68.6*48.6*68.6mm 25W Max Qi2.2 3mm ABS+Tempered Glass Input Output Product Standard Product Dimension Product Material Charging Distance Charging Efficiency Specifications Parts List Note:This product is applicable to all Qi standard wireless charging phones,other phones need an external receiver for wireless charging function. Vent Clip Tempered glass Ring-shaped magnet 1.Please do not vigorously extrude or collide. 2.Please do not dismantle or put it into fire or water when the pr oduct is power on,to avoid short circuit or leakage. 3.Please do not use it in severely high temperature,high humidity or c orrosive environment,to avoid damage to the circuit leakage. 4.Please do not put the magnetic strip or chip card (Such as ID c ard,bankcard etc.)on the charging pad to avoid to cause magnetic card lose efficacy. 5.Please do not put the metal (Such as coin etc.) on the charging p ad when charging,to avoid damage from heating. Attention Heat the fins User Manual Wireless Car Charger PCBA board Vortex fan Bottom cover 1. Please make sure the product connect to the power before using. 2. The product stop charging when the current is too large or there is foreign object. Do not wireless charging the phone if similar situation happened. 3. Please purchase the wireless receiver module or case separately (Not included in the product) if your phone do not support wireless charging. 4. The power input is 15V, when placed the phone and wireless charging starts, the chilling plate works and the fan rotates. When the phone is removed, the chilling plate stops working and the fan stops rotating 20 seconds later. 5. It is recommended to use phone case less than 2.5mm thick. The product cools the phone backside surface,too thickness phone case will affect the cooling effect. 1.Built-in strong magnets, easier for one-hand operation. 2.Built-in smart semiconductor chilling plate and cooling fan, the fan will start working when the wireless charging starts,the chilling plate cools the wireless charging coil and the phone surface simultaneously to improve the wireless charging efficiency. 3.Standby mode: The light with cycle memory function,the RGB light keeps on after running 3 laps,and the brightness is halved after 10 seconds of standby. 4.Charging mode: The ice blue light breathing. 5.Fan Button: When wireless charging, press the button to turn on / off the fan and semiconductor chilling plates. When off, the fan will stop working 20 seconds later after the semiconductor chilling plate stops. 6.Light Button: RGB running light will display according to the memory function when powered on:Press the light button, the green light turns on and keeps on. After 10 seconds, the brightness is reduced to half.Press the light button, and the light gradually changes from red to green, blue, ice blue, yellow, purple, and white. After 10 seconds, the brightness is reduced to half. Press the light button again to turn the light off. Press the light button again, return to step 1, and the cycle repeats. 5.FOD function: when put such as one coin, metal, or magnetic objects on the charger, the ice blue light flashs 6 times and the phone does not charge. 6.Comprehensive protection: such as temperature, overpressure, etc. Product Features Product Operating Guide Aluminum alloy circle 9 Fast wireless charging requires PD45W or above adapter. Model:IC-Q2 Manufacturer:Shenzhen Mgctech Co.,Ltd. FCC ID:2AVSB-IC-Q2 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - R eorient or relocate the receiving antenna. - Incr ease the separation between the equipment and receiver. - Connect the equipment int o an outlet on a circuit different from that t o which the receiver is connect ed. - Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Oasis Compliance, Inc./JIANMIN HE FRN: 0033464157 Contact Name: James He Address: 3313 Verdi Dr, San Jose, CA 95111 Telephone No: (202)602-8330 Email: [email protected] Applicant: Company name: Shenzhen Mgctech Co., Ltd. FRN: 0029269446 Product Description: Wireless Car Charger Grantee code: 2AVSB FCC ID: 2AVSB-IC-Q2 Contact Name: Cici Huang Address: 401, Bldg.14, No. 48-12, Fuchengao Rd., Pinghu Street, Longgang District, Shenzhen, China. Telephone No: 0755-28266187 Email: [email protected] [Shenzhen Mgctech Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [Oasis Compliance, Inc./JIANMIN HE] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Mgctech Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Oasis Compliance, Inc./JIANMIN HE] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 09.28.2025 Applicant’s Name: Cici Huang US Agent’s Name: James He Title: Overseas Sales Manager Title: Global Market Access Manager Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Mgctech Co., Ltd. Grantee code: 2AVSB FCC ID:2AVSB-IC-Q2 FRN: 0029269446 Contact Name: Cici Huang Address: 401, Bldg.14, No. 48-12, Fuchengao Rd., Pinghu Street, Longgang District, Shenzhen, China. Telephone No: 0755-28266187 Fax No: Email:[email protected] i.[Shenzhen Mgctech Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii.[Shenzhen Mgctech Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Shenzhen Mgctech Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 09.28.2025 Applicant’s Name: Cici Huang Title: Overseas Sales Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist N/A

Shenzhen Mgctech Co., Ltd. Code 00018768 Ed. 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device Wireless Car Charger Company name Shenzhen Mgctech Co., Ltd. Grantee code 2AVSB FCC ID 2AVSB-IC-Q2 FRN 0029269446 Contact name Cici Huang Address 401, Bldg.14, No. 48-12, Fuchengao Rd., Pinghu Street, Longgang District, Shenzhen, China. Telephone number 0755-28266187 E-mail [email protected] Chipset/module information CV90367B Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A 3 # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software 4 Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Cici Huang Date: 9/28/2025 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

Shenzhen Mgctech Co., Ltd. Product Similarity Declaration Product name: Wireless Car Charger Model name: IC-Q2, S23 FCC ID: 2AVSB-IC-Q2 We (Shenzhen Mgctech Co., Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: Cici Huang Title: Overseas Sales Manager Date: 9/28/2025

TCB CALL página 1 File FCC ID: 2AVSB-IC-Q2 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from CALIFORNIA: https://www.sanjoseca.gov/your-government/departments-offices/finance/business-tax-registration/business-tax-lookup TCB CALL página 2 In google: However after deeply investigate I could see: TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit " C5266091_X23_Ed1_US_Agent_Letter " >

C5266091_X10_Ed.2 1/1 Shenzhen Mgctech Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 9/28/2025 Subject: Request for Confidentiality FCC ID: 2AVSB-IC-Q2 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Cici Huang Title: Overseas Sales Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Shenzhen Mgctech Co., Ltd. Address: 401, Bldg.14, No. 48-12, Fuchengao Rd., Pinghu Street, Longgang District, Shenzhen, China. Product Name: Wireless Car Charger Model Number: IC-Q2, S23 FCC Identifier: 2AVSB-IC-Q2 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Cici Huang Date: 9/28/2025 Title: Overseas Sales Manager Signature of applicant:

Page 1 of 3 Report No.: MTi250819025-0302 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT (External Photos) Model: IC-Q2 Page 2 of 3 Report No.: MTi250819025-0302 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Page 3 of 3 Report No.: MTi250819025-0302 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected]

前视图 IC-Q2镭雕文件 Type-C接口 后视图 68.6mm 65mm 7.4mm 46.8mm 镭雕用线框图上的文案 图案居中 文案尺寸 Wireless Car Charger Model:IC-Q2 Manufacturer:Shenzhen Mgctech Co.,Ltd. FCC ID:2AVSB-IC-Q2 Input:DC 15V/3A Output:25W Max Made in China

Page 1 of 5 Report No.: MTi250819025-0302 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: IC-Q2 Page 2 of 5 Report No.: MTi250819025-0302 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Page 3 of 5 Report No.: MTi250819025-0302 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Page 4 of 5 Report No.: MTi250819025-0302 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Page 5 of 5 Report No.: MTi250819025-0302 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Coil

Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE014 Ver./Rev.：A1 Page 1 of 16 TestReport ReportNo.:MTi250819025-0302E2 DateofIssue:2025-09-25 Applicant:ShenzhenMgctechCo.,Ltd. Product:WirelessCarCharger Model(s):IC-Q2,S23 FCCID:2AVSB-IC-Q2 ShenzhenMicrotestCo.,Ltd. TESTREPORT ReportNo.:MTi250819025-0302E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE014 Ver./Rev.：A1 Page2of16 Tableofcontents 1GeneralDescription.............................................................................................................4 1.1DescriptionoftheEUT..........................................................................................................................4 1.2Descriptionoftestmodes......................................................................................................................5 1.3Descriptionoftestmodes......................................................................................................................5 1.4Descriptionofsupportunits...................................................................................................................6 2Measurementuncertainty...................................................................................................6 3Testfacilitiesandaccreditations.......................................................................................7 3.1Testlaboratory.......................................................................................................................................7 4Listoftestequipment..........................................................................................................8 5Testresult.............................................................................................................................9 5.2Testsetup............................................................................................................................................10 5.3TestProcedures...................................................................................................................................10 5.4Informationoftestequipment..............................................................................................................11 5.5Testresults...........................................................................................................................................12 PhotographsoftheTestSetup................................................................................................15 PhotographsoftheEUT...........................................................................................................15 TESTREPORT ReportNo.:MTi250819025-0302E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE014 Ver./Rev.：A1 Page3of16 TestResultCertification ApplicantShenzhenMgctechCo.,Ltd. ApplicantAddress 401,Bldg.14,No.48-12,FuchengaoRd,PinghuStreet,LonggangDistrict. Shenzhen,China. ManufacturerShenzhenMgctechCo.,Ltd. Manufacturer Address 201,Bldg.C,No.12,FushengRoadPinghuFuchengaoStreet,Longgang District,Shenzhen,China. FactoryShenzhenMgctechCo.,Ltd. Factory Address 201,Bldg.C,No.12,FushengRoadPinghuFuchengaoStreet,Longgang District,Shenzhen,China. Productdescription ProductnameWirelessCarCharger TrademarkN/A ModelnameIC-Q2 SeriesModel(s)S23 Standards 47CFRPART1,§1.1310 part2.1091 TestmethodKDB680106D01WirelessPowerTransferv04 TestingInformation Dateoftest2025-09-02to2025-09-05 TestResultPass Preparedby:LetterLan Reviewedby:DavidLee Approvedby:LewisLian TESTREPORT ReportNo.:MTi250819025-0302E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE014 Ver./Rev.：A1 Page 4 of 16 1GeneralDescription 1.1DescriptionoftheEUT Productname:WirelessCarCharger Modelname:IC-Q2 SeriesModel(s):S23 Modeldifference: Boththemodelsarethesamecircuitandmodule,exceptthemodel name. Electricalrating: Input:15VDC3A WirelessOutput:5W,10W,25W Accessories: Cable: Type-CtoType-Ccable1m Hardwareversion:V1.1 Softwareversion:V1.0 Testsample(s)number:MTi250819025-03-R001 RFspecification Operatingfrequency range: 115-205kHz(5W,10W);360kHz(25W) Modulationtype:ASK Antenna(s)type:Coil TESTREPORT ReportNo.:MTi250819025-0302E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE014 Ver./Rev.：A1 Page 5 of 16 1.2Descriptionoftestmodes AllthetestmodeswerecarriedoutwiththeEUTinnormaloperation,thefinaltestmodeofthe EUTwastheworsttestmodeforemissiontest,whichwasshowninthisreportanddefinedas: 1.3Descriptionoftestmodes No.Emissiontestmodes Mode1WirelessOutput(5W) Mode2WirelessOutput(10W) Mode3WirelessOutput(25W) Mode4Standby TESTREPORT ReportNo.:MTi250819025-0302E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE014 Ver./Rev.：A1 Page 6 of 16 1.4Descriptionofsupportunits TheEUThasbeentestedasanindependentunittogetherwithothernecessaryaccessoriesor supportunits.Thefollowingsupportunitsoraccessorieswereusedtoformar…

Text truncated - open the document above for the full version.

Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page 1 of 28 TestReport ReportNo.:MTi250819025-0302E1 Dateofissue:2025-09-25 Applicant:ShenzhenMgctechCo.,Ltd. Product:WirelessCarCharger Model(s):IC-Q2,S23 FCCID:2AVSB-IC-Q2 ShenzhenMicrotestCo.,Ltd. TESTREPORT ReportNo.:MTi250819025-0302E1 Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page 2 of 28 Tableofcontents 1GeneralDescription.......................................................................................................................4 1.1DescriptionoftheEUT.........................................................................................................4 1.2Descriptionoftestmodes....................................................................................................4 1.3EnvironmentalConditions....................................................................................................5 1.4Descriptionofsupportunits.................................................................................................5 1.5Measurementuncertainty....................................................................................................5 2SummaryofTestResult................................................................................................................6 3TestFacilitiesandaccreditations................................................................................................7 3.1Testlaboratory.....................................................................................................................7 4Listoftestequipment....................................................................................................................8 5EvaluationResults(Evaluation)...................................................................................................9 5.1Antennarequirement...........................................................................................................9 6RadioSpectrumMatterTestResults(RF)................................................................................10 6.1ConductedEmissionatACpowerline..............................................................................10 6.220dBOccupiedBandwidth................................................................................................13 6.3Emissionsinfrequencybands(below30MHz).................................................................17 6.4Emissionsinfrequencybands(30MHz-1GHz)...............................................................22 Photographsofthetestsetup...........................................................................................................26 PhotographsoftheEUT..........................................................................................…

Text truncated - open the document above for the full version.